Flash Advanced Stock Kernel now black screen - Sony Xperia P, U, Sola, Go

Hi guys, I've got a huge problem with my xperia s... I use fastboot to unlock my bootloader n i proceed to flashing the kernel using this guide http://forum.xda-developers.com/showthread.php?t=1729280&highlight=black I've followed the doomlord guide with the fastboot flash boot kernel.elf but can't at the first try then i rename the file icsxx.elf to kernel.elf and was succesful and the command was back to fastboot>
So i type in fastboot reboot but it did nothing. then i plug out the phone ... and try all the power button... power +up vol it vibrates once then it vibrate 3 times and repeat... What happen?

solheart said:
Hi guys, I've got a huge problem with my xperia s... I use fastboot to unlock my bootloader n i proceed to flashing the kernel using this guide http://forum.xda-developers.com/showthread.php?t=1729280&highlight=black I've followed the doomlord guide with the fastboot flash boot kernel.elf but can't at the first try then i rename the file icsxx.elf to kernel.elf and was succesful and the command was back to fastboot>
So i type in fastboot reboot but it did nothing. then i plug out the phone ... and try all the power button... power +up vol it vibrates once then it vibrate 3 times and repeat... What happen?
Click to expand...
Click to collapse
You should reflash using a new kernel! Or stock kernel!
Don't forget to hit thank, if i deserve it!
Sent from my LT26i using xda premium

solheart said:
Hi guys, I've got a huge problem with my xperia s... I use fastboot to unlock my bootloader n i proceed to flashing the kernel using this guide http://forum.xda-developers.com/showthread.php?t=1729280&highlight=black I've followed the doomlord guide with the fastboot flash boot kernel.elf but can't at the first try then i rename the file icsxx.elf to kernel.elf and was succesful and the command was back to fastboot>
So i type in fastboot reboot but it did nothing. then i plug out the phone ... and try all the power button... power +up vol it vibrates once then it vibrate 3 times and repeat... What happen?
Click to expand...
Click to collapse
Your screen doesn't work at all when you reboot? After flashing Advanced Stock ICS Kernel I had to access the recovery (when booting regularly the led will light blue, the notification bar will glow and the phone will buzz once, all at the same time, at that instant press volume up), and flash the kernel again but in zip format.
If the screen doesn't work I'd try flashing the kernel again and if the problem remains just re-flash a stock firmware with Flashtool and then flash the kernel again. Going in recovery to reflash ics15.zip after using fastboot will be necessary though.
Odd that you had to change the kernel name, flashing ics15.elf with fastboot worked for me.

thank god
Thank God you replied I'm almost scared to death.
I just plug in n now finally there's blue light n i can go into fastboot. T.T
I have to rename it cuz it doesn't work... so what do you type? do you download the fastboot?
Now what should i do? should try again? or redownload n reflash the advanced stock kernel or other kernel?
but the doomlord guide didn't say anything about booting into the recovery and reflash it or did i miss a step? cuz doomlord guide says type "fastboot reboot" thus is rebooting?
editk so i did reflash the advanced stock but after i type fastboot reboot it says rebooting... but it did nothing! not even a buzz

solheart said:
Thank God you replied I'm almost scared to death.
I just plug in n now finally there's blue light n i can go into fastboot. T.T
I have to rename it cuz it doesn't work... so what do you type? do you download the fastboot?
Now what should i do? should try again? or redownload n reflash the advanced stock kernel or other kernel?
Click to expand...
Click to collapse
I think just make sure ur kernel is not corrupted then reflash! Do u know how to reflash! When it done u can unplug and turn it on normally!
Don't forget to hit thank, if i deserve it!
Sent from my LT26i using xda premium

ok i'm keeping calm and everything but can i flash using fastboot into stock? like all stock firmware n rom n kernel? is there a guide?
Alright Thanks God it works now! I was in despair... but i guess you cannot type the fastboot reboot.
So what i did is reflash after it says okay! unplug ...and just turn it on normally. sorry for panicking

Related

[Q][ACTIVE] messed with the flashtool now how to fix with flastboot

Hi
I really appreciate all the help, stuck and dont know whats next.
Shortly i connected xperia Active to X10FlashTool and pressed root and Optimize.
After that phone keeps restarting, only flashing the SE logo and then restart again. I put it to recovery - power, usb, volume +, and now its blank with only blue light burning. Connected via USB device manager showing - Android ADB intreface connected.
If i run fastboot i can see the device and if i type- Fastboot -i 0x0fce flash boot boot.img (http://forum.xda-developers.com/showthread.php?t=1345215) i get must be rooted first.
So basically my question is please explain to stupid noob how i can get my SE back to stock rom or even to boot it normally again!
Thanks!
Please ask if i forgot something!
You dont need to be rooted in order to flash a custom kernel. Basically flashing a custom kernel gives you the ability to root your phone. Try my Kernel that autoroots your phone.
http://forum.xda-developers.com/showthread.php?t=1345215
You can use that kernel with the stock rom. All it does is it gives you root privileges, busybox and CWM. You can boot into CWM by pressing the power button several times as the screen lights up brigter than normal on the Sony Ericsson logo.
dumraden said:
You dont need to be rooted in order to flash a custom kernel. Basically flashing a custom kernel gives you the ability to root your phone. Try my Kernel that autoroots your phone.
http://forum.xda-developers.com/showthread.php?t=1345215
Click to expand...
Click to collapse
How do i get this boot.img in to the phone?
dumraden said:
You can use that kernel with the stock rom. All it does is it gives you root privileges, busybox and CWM. You can boot into CWM by pressing the power button several times as the screen lights up brigter than normal on the Sony Ericsson logo.
Click to expand...
Click to collapse
pressing power button several times does not work, logo shows up as normal and then restart again.
means that the logo does not get brighter at all phone restarts againbefore that...
Lol? You have already posted it dude....
Fastboot -i 0x0fce flash boot boot.img
If that doesnt work, i think you have messed up something with the Flash Tool.
BTW... Have you unlocked the Bootloader?
dumraden said:
Lol? You have already posted it dude....
Fastboot -i 0x0fce flash boot boot.img
If that doesnt work, i think you have messed up something with the Flash Tool.
BTW... Have you unlocked the Bootloader?
Click to expand...
Click to collapse
Ok, yes, but this fastboot command gives me error: you must be rooted first...
What do you mean under unlock bootloader?
Thanks!
/facepalm
http://unlockbootloader.sonyericsson.com/

Stuck at the sony logo after flashing Ice cream Pureness build 11

I have sony ericsson neo v on 4.0.4 build 4.1.b.0.431 with unlocked bootloader (by official method), rooted, and CWM installed by X-part. I believe the cause is that I did not format /system (in mounts and storage), format /cache, and format /Data.
I am unable to access CWM. Could anyone able to access CWM and then re-flash the Pureness by CWM, or I have to flash with FlashTool to install the original Stock ICS. Then start all over again??!!
I have not done any FlashTool before. Any guideline??
Many thanks!!!
Did you first install the kernel as advised?
If not, then flash the kernel through fastboot and then boot into CWM.
Sent from my Xperia Neo V using Tapatalk 2
I actually flash the follow the installation as follow but apparently omit step 4-6 below:
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
7.Install Xperia_Ice_Cream_Pureness_build_10.00.zip
8.Install patch for your phone model
9.Reboot now and you are done !
I did not 'first install the kernal as advised'??
Is this a fix, and could you tell me more how exactly fastboot and flash the kernal as you suggest??
Thanks!!!
misato9307 said:
I actually flash the follow the installation as follow but apparently omit step 4-6 below:
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
7.Install Xperia_Ice_Cream_Pureness_build_10.00.zip
8.Install patch for your phone model
9.Reboot now and you are done !
I did not 'first install the kernal as advised'??
Is this a fix, and could you tell me more how exactly fastboot and flash the kernal as you suggest??
Thanks!!!
Click to expand...
Click to collapse
Flash alliance kernel via fastboot...after that you'll be able to access cwm( To get into fastboot turn off your phone and plug in the usb while holding the menu key,led will turn blue... In the folder where fast boot is present in your pc hold shift key and press the right button & open cmd, then enter fastboot flash boot boot.img)"boot.img will be the name of the img file you're about to flash"
Or
You can enter into cwm by using the app called x parts, but you'll be unable to get into cwm by pressing the volume down key
Press thanks if I helped you
Sent from my LT26i using Tapatalk 2
sujeesh.p7 said:
Flash alliance kernel via fastboot...after that you'll be able to access cwm( To get into fastboot turn off your phone and plug in the usb while holding the menu key,led will turn blue... In the folder where fast boot is present in your pc hold shift key and press the right button & open cmd, then enter fastboot flash boot boot.img)"boot.img will be the name of the img file you're about to flash"
Or
You can enter into cwm by using the app called x parts, but you'll be unable to get into cwm by pressing the volume down key
Press thanks if I helped you
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Few more queries to clarify:
1. '......In the folder where fast boot is present in your pc hold': pc stands for PC Companion??
2. Do I need to download boot.img?? If so, please forward me the link??
3. After flashing the boot.img, is it just lead to fixing the CWM??
4. After fixing the CWM, should I simply follow the steps again on flashing the Pureness ROM, or I must flash the 'alliance kernel' first??
5. Please forward me the link for 'alliance kernel'.
Many thanks!!!
As for your questions,
1. PC here means your computer.. And the folder means that folder where you have kept your fastboot files!
2 & 5. Here's the link of the alliance kernel that you need to flash..
http://forum.xda-developers.com/showthread.php?t=1566871
Copy this .img kernel into the fastboot folder, and rename it to boot.img
Holding the shift key, right click and you get an option to open the command window..
In fastboot mode, holding the menu key while inserting the usb cable.. Type the following in the cmd..
fastboot flash boot boot.img
Now turn your phone on.. Boot into CWM by pressing the volume down button.. Install the ROM from CWM!
Sent from my Xperia Neo V using Tapatalk 2
iamdchosen1 said:
As for your questions,
1. PC here means your computer.. And the folder means that folder where you have kept your fastboot files!
2 & 5. Here's the link of the alliance kernel that you need to flash..
http://forum.xda-developers.com/showthread.php?t=1566871
Copy this .img kernel into the fastboot folder, and rename it to boot.img
Holding the shift key, right click and you get an option to open the command window..
In fastboot mode, holding the menu key while inserting the usb cable.. Type the following in the cmd..
fastboot flash boot boot.img
Now turn your phone on.. Boot into CWM by pressing the volume down button.. Install the ROM from CWM!
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Thanks again.
I understand all what you advise. Basically this is how bootloader was unlocked by official method, of course apart from flash the boot.img.
However if I able to save from stuck at SONY logo, is it true that my NEO V could boot as usual before??
Thanks!!!
You won't stuck at Sony logo anymore if you follow all the steps properly!
Sent from my Xperia Neo V using Tapatalk 2
iamdchosen1 said:
You won't stuck at Sony logo anymore if you follow all the steps properly!
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Everything fixed. Thanks!!!
problem
when i flash the kernal it says that it is waiting for device and nothing happen pleaase help !!
---------- Post added at 03:43 PM ---------- Previous post was at 03:37 PM ----------
sujeesh.p7 said:
Flash alliance kernel via fastboot...after that you'll be able to access cwm( To get into fastboot turn off your phone and plug in the usb while holding the menu key,led will turn blue... In the folder where fast boot is present in your pc hold shift key and press the right button & open cmd, then enter fastboot flash boot boot.img)"boot.img will be the name of the img file you're about to flash"
Or
You can enter into cwm by using the app called x parts, but you'll be unable to get into cwm by pressing the volume down key
Press thanks if I helped you
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
it keeps telling me in the command menu that it is waiting for device what should i do !
aliiahmed.20 said:
when i flash the kernal it says that it is waiting for device and nothing happen pleaase help !!
---------- Post added at 03:43 PM ---------- Previous post was at 03:37 PM ----------
it keeps telling me in the command menu that it is waiting for device what should i do !
Click to expand...
Click to collapse
You are not connected in fastboot.
Turn off phone.
Press menu button on phone and connect usb.
Open command window and naviagate to where your fastboot file is.
Type fasboot devices
If it returns nothing your phone is not connected.
Like this CONNECTED DEVICES:
If it is connected it will return something like this
CONNECTED DEVICES: 65373FDHC67
Send me a screen shot of your PC after you have typed fastboot devices
gregbradley said:
You are not connected in fastboot.
Turn off phone.
Press menu button on phone and connect usb.
Open command window and naviagate to where your fastboot file is.
Type fasboot devices
If it returns nothing your phone is not connected.
Like this CONNECTED DEVICES:
If it is connected it will return something like this
CONNECTED DEVICES: 65373FDHC67
Send me a screen shot of your PC after you have typed fastboot devices
Click to expand...
Click to collapse
okay my device is connected but it tells me now that it's not rooted !
aliiahmed.20 said:
okay my device is connected but it tells me now that it's not rooted !
Click to expand...
Click to collapse
Have you ever root your device??
aliiahmed.20 said:
okay my device is connected but it tells me now that it's not rooted !
Click to expand...
Click to collapse
Fastboot refers to unlocked bootloader as root.
Have you unlocked your bootloader?
You will know if you have done it! If you are unsure then you have not unlocked it, therefore, you cannot flash custom kernels so you need to either:
1. Use custom roms that are for LOCKED bootloader, or
2. Unlock your bootloader. To do this check the sticky threads in the DEV section
gregbradley said:
Fastboot refers to unlocked bootloader as root.
Have you unlocked your bootloader?
You will know if you have done it! If you are unsure then you have not unlocked it, therefore, you cannot flash custom kernels so you need to either:
1. Use custom roms that are for LOCKED bootloader, or
2. Unlock your bootloader. To do this check the sticky threads in the DEV section
Click to expand...
Click to collapse
my bootloader is locked
but when i unlock it i need the android sdk program but when i download it i doesnt get any extras with it or even a package i can download
aliiahmed.20 said:
my bootloader is locked
but when i unlock it i need the android sdk program but when i download it i doesnt get any extras with it or even a package i can download
Click to expand...
Click to collapse
You cannot conect in fastboot with a locked bootloader.
Also, it seems daft that you are using 2 threads to discuss this problem.
My final bit of advice.
Download flashtool (its in the sticky threads in the dev section)
Download a stock .ftf (Found in the sticky threads in the dev section)
Flash the .ftf using flashtool when connected in flash mode (Not fastboot mode) You enter flashmode by pressing back button, not the enu button when connecting.
Once you have done that the phone should boot up with stock rom. Then you can use flashtool to install a recovery and install the pureness rom properly.
gregbradley said:
You cannot conect in fastboot with a locked bootloader.
Also, it seems daft that you are using 2 threads to discuss this problem.
My final bit of advice.
Download flashtool (its in the sticky threads in the dev section)
Download a stock .ftf (Found in the sticky threads in the dev section)
Flash the .ftf using flashtool when connected in flash mode (Not fastboot mode) You enter flashmode by pressing back button, not the enu button when connecting.
Once you have done that the phone should boot up with stock rom. Then you can use flashtool to install a recovery and install the pureness rom properly.
Click to expand...
Click to collapse
okay i did that but it come to the end and disconnect the device
aliiahmed.20 said:
okay i did that but it come to the end and disconnect the device
Click to expand...
Click to collapse
yes, have you tried to turn the phone on.....disconnect it and turn it on
You could always show a screenshot of what flashtool outputs so we can see the log....
gregbradley said:
yes, have you tried to turn the phone on.....disconnect it and turn it on
You could always show a screenshot of what flashtool outputs so we can see the log....
Click to expand...
Click to collapse
could you give me a link for the ftf file because i didnt find a suitable one for my mobile
and the mobile is connected right (the LED is green) it tells that it's preparing files and every thing go well untill the end it says that the device is disconnected
aliiahmed.20 said:
could you give me a link for the ftf file because i didnt find a suitable one for my mobile
and the mobile is connected right (the LED is green) it tells that it's preparing files and every thing go well untill the end it says that the device is disconnected
Click to expand...
Click to collapse
http://www.mediafire.com/?c2762j3jakn79kj
Download (Dont worry its for neo v, it doesnt matter, its just stockrom to get you going)
Place in firmware folder of flashtool.
Open flashtool
press flash icon
choose the file in the link
Turn off phone
Press back button and keep pressed then attach usb cable.
Flashtool will recognise your phone
let go of back button
wait untill flashtool finishes
disconnect and turn on phone.
First boot may take a while.
Goto settings and allow unknown sources and usb debugging.
Then use flash tool to root, install recovery and then you can install pureness via CMW making sure you follow every step in the guide, including all the wipes.

Unable to flash kernel.

after 1 month I try to change rom but when i try to flash kernel it is not activating flash mode or fast boot.
please help me what can i do?
faraznabi31 said:
after 1 month I try to change rom but when i try to flash kernel it is not activating flash mode or fast boot.
please help me what can i do?
Click to expand...
Click to collapse
U can reboot into fastboot mode using flashtool. After installing flashtool you have to find out an option calling "fastboot via adb".just click this option.and the phone automatically reboot into fastboot mode.but u have to install all usb driver for ur device.
Sent from my WT19i using xda app-developers app
faraznabi31 said:
after 1 month I try to change rom but when i try to flash kernel it is not activating flash mode or fast boot.
please help me what can i do?
Click to expand...
Click to collapse
My silly mistake when i wanna flash my first kernel was pressing my volume down button on my lww instead of volume up..
So if youre using lww, then volume up is for fastboot mode and volume down is for flashmode.
Sent from my LWW. Cheers, Its Legend, wait for it, DARY!

[Q] Sony Xperia P stuck at Sony logo

Hello guys,
I will try to explain my problem in few points. I was trying to flash my phone with CM11 and the steps I took are:
1. flashed kernel using fastboot (boot.img)
2. wiped data, cache etc.
3. noticed I forgot to copy CM11 to internal memory
4. the phone can't boot and I'm unable to copy data, it stucked at Sony logo
5. I can't recover it as I wiped all data
6. tried to flash it with stock rom using flashtool, but the green light turn on only for about 2 sec and then the red one appears/ the same with fastboot purple led
7. I can still enter CWM, but I don't know how it could help
dominictrance said:
Hello guys,
I will try to explain my problem in few points. I was trying to flash my phone with CM11 and the steps I took are:
1. flashed kernel using fastboot (boot.img)
2. wiped data, cache etc.
3. noticed I forgot to copy CM11 to internal memory
4. the phone can't boot and I'm unable to copy data, it stucked at Sony logo
5. I can't recover it as I wiped all data
6. tried to flash it with stock rom using flashtool, but the green light turn on only for about 2 sec and then the red one appears/ the same with fastboot purple led
7. I can still enter CWM, but I don't know how it could help
Click to expand...
Click to collapse
very easy,just flash the original kernel for your current ROM.
Then it should boot
Ben Ling said:
very easy,just flash the original kernel for your current ROM.
Then it should boot
Click to expand...
Click to collapse
It's not that easy. I can't flash it because both flashmode or fastboot aren't working.
dominictrance said:
It's not that easy. I can't flash it because both flashmode or fastboot aren't working.
Click to expand...
Click to collapse
don't use flashtool,use the fastboot tools and open command, type the letters i mentioned just now.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Ben Ling said:
don't use flashtool,use the fastboot tools and open command, type the letters i mentioned just now.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also tried that. I connected usb cable while kepping pressed volume up key and typed in command line 'fastboot flash boot boot.img and it keep saying < waiting for device >.
Is there a way to upload kernel or whole rom to internal memory when the phone is bricked?
dominictrance said:
Also tried that. I connected usb cable while kepping pressed volume up key and typed in command line 'fastboot flash boot boot.img and it keep saying < waiting for device >.
Is there a way to upload kernel or whole rom to internal memory when the phone is bricked?
Click to expand...
Click to collapse
Extract the zip http://d-h.st/vvJ
Put your boot.img in the extracted folder
Open command in that folder
and type the command
hold volume up while you are connecting your phone to pc
Ben Ling said:
Extract the zip
Put your boot.img in the extracted folder
Open command in that folder
and type the command
hold volume up while you are connecting your phone to pc
Click to expand...
Click to collapse
Still the same. The purple led appears for just 2 seconds and then the red one.
dominictrance said:
Is there a way to upload kernel or whole rom to internal memory when the phone is bricked?
Click to expand...
Click to collapse
Can you upload or do anything with a brick other than to use it as a brick?
Try this http://d-h.st/9Pw
ChikeD said:
Can you upload or do anything with a brick other than to use it as a brick?
Try this
Click to expand...
Click to collapse
I can't, that's why I asked.
The problem is that the phone do not enter flash or fastboot mode so I'm unable to upload kernel or rom using these methods.
dominictrance said:
I can't, that's why I asked.
The problem is that the phone do not enter flash or fastboot mode so I'm unable to upload kernel or rom using these methods.
Click to expand...
Click to collapse
It sure does, what do you think "Device connected in flash mode" means?
Try it
The problem is now solved as I tried flashing it on another computer.
Thank you all for your help.

[Q] [q] please helppppp!!!

My z ultra is not responding because i messed up flashing custom rom.
i want to flash my tft file using flash tool but im stocked on flashmode!!
volume down button is not responding, please help me how to boot up to flash mode without pressing
volume down button. any alternative way to go through flash mode??????
rudynasco said:
My z ultra is not responding because i messed up flashing custom rom.
i want to flash my tft file using flash tool but im stocked on flash boot mode!!
volume down button is not responding, please help me how to boot up to flash mode without pressing
volume down button. any alternative way to go through flash mode??????
Click to expand...
Click to collapse
What do you do wrong as we might beable to fix it another way
blueether said:
What do you do wrong as we might beable to fix it another way
Click to expand...
Click to collapse
I flash gpe rom without boot.img, i flash using nu recovery then flash the gpe rom.
then the phone is dead!
i want to restock my phone using flashtool but my volume down button is broken, fastboot mode cant detect
when i press down volume button.
but i can go to flash mode
rudynasco said:
I flash gpe rom without boot.img, i flash using nu recovery then flash the gpe rom.
then the phone is dead!
i want to restock my phone using flashtool but my volume down button is broken, fastboot mode cant detect
when i press down volume button.
but i can go to flash mode
Click to expand...
Click to collapse
Did you unlock the bootloader?
Have you backed up the TA partition?
blueether said:
Did you unlock the bootloader?
Have you backed up the TA partition?
Click to expand...
Click to collapse
the boatloader is unlocked when i bought the phone from the store
rudynasco said:
the boatloader is unlocked when i bought the phone from the store
Click to expand...
Click to collapse
Bootloader needs to be unlocked to run a custom kernel, just the fact the phone is [sim] unlocked is not enough.
I was going to suggest to flash the doomkernel from the GPe thread, if you had unlocked the bootloader and backed up the TA
blueether said:
Bootloader needs to be unlocked to run a custom kernel, just the fact the phone is [sim] unlocked is not enough.
I was going to suggest to flash the doomkernel from the GPe thread, if you had unlocked the bootloader and backed up the TA
Click to expand...
Click to collapse
the bootloader is unlocked as i checked, but in this case can u help me what shall i do next?
flash the doomkernel using flash tool?
tnx
rudynasco said:
the bootloader is unlocked as i checked, but in this case can u help me what shall i do next?
flash the doomkernel using flash tool?
tnx
Click to expand...
Click to collapse
Flash this http://forum.xda-developers.com/showthread.php?t=2769608 with fastboot
From the command line:
Code:
fastboot flash boot <kernel_name>
blueether said:
Flash this http://forum.xda-developers.com/showthread.php?t=2769608 with fastboot
From the command line:
Code:
fastboot flash boot <kernel_name>
Click to expand...
Click to collapse
i just want to clear that my phone is c6833 and not stock GPE,
i downloaded a gpe rom for c6833 model and messed it up.
i will proceed??
Tnx
rudynasco said:
i just want to clear that my phone is c6833 and not stock GPE,
i downloaded a gpe rom for c6833 model and messed it up.
i will proceed??
Tnx
Click to expand...
Click to collapse
Yes the GPe kernel should boot the rom on a c6833. I'm not sure why the rom wont boot on the stock kernel.
blueether said:
Yes the GPe kernel should boot the rom on a c6833. I'm not sure why the rom wont boot on the stock kernel.
Click to expand...
Click to collapse
Sorry for being noob, i have downloaded the kernel so i will flash this using flashtool right?
can u guide me for the next step pls.
Thnx alot
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img or kernel.elf or kernel.sin.
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.
I cant go to fastboot via adb and the kernel file i downloaded cant be detected.
pls help
now i finally knew why my phone is dead. i installed custom rom withour unlocking bootloader.
I want to go back to stock firmware but my volume down rocker is broken so i cannot turn my device into flashmode,
please help me what to do cos i am noob:crying::crying::crying::crying:
Hit the power button and vol up together and wait until the device vibrates 3 times. Doing it you will force it to shutdown completely. Now go ahead and get into flash mode.
rudynasco said:
now i finally knew why my phone is dead. i installed custom rom withour unlocking bootloader.
I want to go back to stock firmware but my volume down rocker is broken so i cannot turn my device into flashmode,
please help me what to do cos i am noob:crying::crying::crying::crying:
Click to expand...
Click to collapse
I cant think of a way to get a non booted ZU into flashmode
I do have one thought on how to fix this - flash a system partition dump in fastboot, It will take me a little time to make this for you
Edit:
I have to charge the c6802 up as it is flat then flash a FTF and extract the files and test, all while the wife if using the PC (she has 5 days left untill she has finished a double degree, and a separate research project on the go - I may not get the PC for a few hours)
It looks like fastboot won't open a full 2.3 GB system dump, so there goes that idea
Do you have any warranty on the device? if so the steps below will void you warranty - if you haven't already. It will also wipe all data and the DRM keys
Have you flashed any kernel/boot.img? if so then do the last steps (5, 6 & 7) as well to get on a kernel compatible with the GPe ROM
You will need the fastboot drivers installed (should be installed with flashtool) and you will need adb/fastboot (should be in the flashtool folder)
Get your unlock code from Sony's dev site, you will need the IMEI # in the tag in the sim bay
Open a command line in the flashtool folder that has adb and fastboot .exe files
Enter this command:
Code:
fastboot oem unlock <unlock_code_from_sony>
Download either scrubber's kernel or DooMLoRD's GPe kernel
Flash boot.img with (if not called boot.img change command below to match):
Code:
fastboot flash boot boot.img
---------- Post added at 05:38 PM ---------- Previous post was at 05:17 PM ----------
Above is edited
blueether said:
It looks like fastboot won't open a full 2.3 GB system dump, so there goes that idea
Do you have any warranty on the device? if so the steps below will void you warranty - if you haven't already. It will also wipe all data and the DRM keys
Have you flashed any kernel/boot.img? if so then do the last steps (5, 6 & 7) as well to get on a kernel compatible with the GPe ROM
You will need the fastboot drivers installed (should be installed with flashtool) and you will need adb/fastboot (should be in the flashtool folder)
Get your unlock code from Sony's dev site, you will need the IMEI # in the tag in the sim bay
Open a command line in the flashtool folder that has adb and fastboot .exe files
Enter this command:
Code:
fastboot oem unlock <unlock_code_from_sony>
Download either scrubber's kernel or DooMLoRD's GPe kernel
Flash boot.img with (if not called boot.img change command below to match):
Code:
fastboot flash boot boot.img
---------- Post added at 05:38 PM ---------- Previous post was at 05:17 PM ----------
Above is edited
Click to expand...
Click to collapse
Thank you guys for your help and i am really sorry for flooding and spamming the entire zu thread.
This is my first time to root (sony way) and own a sony mobile, i was a samsung user before and ive never experienced this kind of horrible situation in flashing roms. I just bought my phone 7 months a go and i was so worried. If my Volume (-) rocker wasnt broken i wouldnt experience this nightmare, but i was hoping maybe someone knows how to turn the phone into flashmode without pressing the volume(-), unfortunately nobody knows.
I brought my mobile to sony service center and i hope they can fix it as i told them my software broke down and i need them to flash to stock firmware.
Edit:
i just saw my first post and it say fastboot mode! LOL sorry again.
i have no problem with the fastboot mode. I was stucked at FLASHMODE!
volume (-) is broken!

Categories

Resources