I put a gingersense rom on and downloaded ti again and tried to restore my contacts and now i'm getting constant pop=up messages saying these processes have stopped working. it won't stop giving me this message. What do I do?
I'm wiping data again and installing rom again...wish me luck
Kdeli said:
I put a gingersense rom on and downloaded ti again and tried to restore my contacts and now i'm getting constant pop=up messages saying these processes have stopped working. it won't stop giving me this message. What do I do?
Click to expand...
Click to collapse
try wiping everything except sd and reflashing the rom
jonah1234 said:
try wiping everything except sd and reflashing the rom
Click to expand...
Click to collapse
Thanks, Jonah, that's just what I did and it worked out.
Only issue now is that I'm running the same radios as cyano 7.1.1. and I now have no data connection or bluetooth connection. I have the ability to send/receive texts and that's all I know.
If I put both the cdma and lte radio on my SD card, can I save them both as the necessary name? Or do I have to flash one at a time?
They have to be flashed one at a time but flashing a new Rom doesn't change your radios
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
They have to be flashed one at a time but flashing a new Rom doesn't change your radios
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Yeah, but I flashed a new rom and now I don't have 3g/4g so I want to update the radios.
I just put the CDMA on one and saved it properly with the .zip at the end and bootloader didn't regognize it. Any idea?
It says wrong image when it tries to find my .zip file and it does nothing. Why would this be happening? Can I install this zip in recovery instead of bootloader?
Did you rename the zip to PG05IMG.zip? It can only be flashed in the bootloader. You may need to toggle mobile network on and off or even put it into airplane mode for it to come on. I remember that one release of liquid it actually needed to be turned on.
Sent from my ADR6400L using Tapatalk 2
I actually got it working finally! I have another question about why my data and all is working -- but not my bluetoooth, still.
Thanks again, everyone
There could be a problem with the Bluetooth stack. There is no telling. Only thing I could suggest is try another Rom. Maybe try an aosp Rom.
Sent from my ADR6400L using Tapatalk 2
Related
I have loaded this radio then I booted into recovery and tried to install Das BAMF Sense 3.0 RC4.9 from zip and the download starts then about halfway though it goes back to the bootloader screen with the android guys skateboarding. It has fastboot highlighted with the only options being bootloader,reboot,reboot bootloader, and power down. I have tried to reboot, boot back into recovery and restore but it keeps going back to this screen...any idea's??
s00paSold3r said:
I have loaded this radio then I booted into recovery and tried to install Das BAMF Sense 3.0 RC4.9 from zip and the download starts then about halfway though it goes back to the bootloader screen with the android guys skateboarding. It has fastboot highlighted with the only options being bootloader,reboot,reboot bootloader, and power down. I have tried to reboot, boot back into recovery and restore but it keeps going back to this screen...any idea's??
Click to expand...
Click to collapse
Well, if you can get into the bootloader you are not bricked. Go to Jcase's stock recovery thread and get the rooted stock PG5... to load in hboot. It will essentially get you back to rooted Froyo and then you can reflash the recovery and whatever rom you want.
Or I believe you can rename a ROM to PG5... and flash it in recovery as well, although I've never tried that method.
Sent from my ADR6400L using Tapatalk
I've never heard of anyone flashing a rom through hboot by renaming it to pg05img or whatever it is. I wouldn't try that without evidence of out working
Sent from my ADR6400L using Tapatalk
You. said:
I've never heard of anyone flashing a rom through hboot by renaming it to pg05img or whatever it is. I wouldn't try that without evidence of out working
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
I have. I've just never tried it. It's not something I've ever had to do.
I still would advise caution though.
Sent from my ADR6400L using Tapatalk
I've tried it and it works! Be careful, I would recommend using the stock rooted PC05img that was in the first post, it usually works, you just have to noodle with the 4g settings after.
thanks guys, I am a happy camper. I am loading the stock rom as we speak....Man I lost sleep and could not work.
I've tried it and it works! Be careful, I would recommend using the stock rooted PC05img that was in the first post, it usually works, you just have to noodle with the 4g settings after.
Click to expand...
Click to collapse
I knew I wasn't nuts, lol. Back when I had the Inspire it was a pretty common thing.
Sent from my ADR6400L using Tapatalk
P.S. @ sOOpasold3r, if you want to wait until about 10pm EST, I can send you the exact radio that will work and it will bring everything in to working order for you.
s00paSold3r said:
thanks guys, I am a happy camper. I am loading the stock rom as we speak....Man I lost sleep and could not work.
Click to expand...
Click to collapse
Good luck. Rooted stock usually does the trick. Just be sure to name it correctly. I always screw that part up, lol.
htcdesirezgeorge said:
P.S. @ sOOpasold3r, if you want to wait until about 10pm EST, I can send you the exact radio that will work and it will bring everything in to working order for you.
Click to expand...
Click to collapse
sure here's my email address [email protected]
I got the stock rom loaded back up.. now I need to reflash CWM
s00paSold3r said:
I got the stock rom loaded back up.. now I need to reflash CWM
Click to expand...
Click to collapse
Good! Yes, I would reflash cwm. Also redownload the rom you want to flash and verify the md5.
Sent from my ADR6400L using Tapatalk
ok chris, I think I have the MR2 Radio on my phone's SD card, if I do, I'll email it earlier.
Okay I ran the s-off tool last week and had success . Then I decided to get off the ics leaked firmware and revert to the gb firmware.
I began experiencing issues with both my wifi and data disconnecting after a period of time. I have tried running the ruu in a exe and zip format and neither have fixed the problem. I also have tried doing a factory reset and clear storage from hboot immediately after the ruu was installed. No luck.
Not sure what the problem is here. Lol. I haven't seen anyone having problems going from ics back to gb. Am I missing something?
cincyelite22 said:
Okay I ran the s-off tool last week and had success . Then I decided to get off the ics leaked firmware and revert to the gb firmware.
I began experiencing issues with both my wifi and data disconnecting after a period of time. I have tried running the ruu in a exe and zip format and neither have fixed the problem. I also have tried doing a factory reset and clear storage from hboot immediately after the ruu was installed. No luck.
Not sure what the problem is here. Lol. I haven't seen anyone having problems going from ics back to gb. Am I missing something?
Click to expand...
Click to collapse
Hmm, I just finished reading the whole post, everyone else seemed to be fixed by doing the factory reset and clear storage. I reverted and haven't had any issues, granted I am just in 3g land so don't think 3G was an issue . Is it a problem while on the stock rom or just when you flash a custom rom ?
You shouldn't post your issue twice
Sent from my ADR6425LVW using Tapatalk 2
I'm running stock and the weird thing is that my data icon goes away but in settings it has it marked like it is on.
cincyelite22 said:
I'm running stock and the weird thing is that my data icon goes away but in settings it has it marked like it is on.
Click to expand...
Click to collapse
That's because the radio is on, but just because the radio is on doesn't mean you have a data connection.
Isn't there a known issue with flashing back to GB firmware and losing data?
tekhna said:
That's because the radio is on, but just because the radio is on doesn't mean you have a data connection.
Isn't there a known issue with flashing back to GB firmware and losing data?
Click to expand...
Click to collapse
Some have reported it , but he attempted the fix already and is saying it still isn't working. I am really not sure what else you could try other than running the RUU again, then trying to factory reset and clear storage.
I think I found the problem. My bootloader was unlocked.
cincyelite22 said:
I think I found the problem. My bootloader was unlocked.
Click to expand...
Click to collapse
That wouldn't mess with data what so ever
Sent from my ADR6425LVW using Tapatalk 2
superchilpil said:
That wouldn't mess with data what so ever
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
That would make issues with the ruu fully flashing though wouldnt it? I relocked before doing the fix.here and im working great
Sent from my ADR6425LVW using Tapatalk 2
I fixed it by doing what I did above, but flashing the eng hboot first.
K I'm using boot manager to install a cm9 Rom and it keeps failing at creating boot.img. I don't know what I'm doing wrong since I've herd of others installing cm9 roms sucessfully using boot manager. Maybe it's something in my settings? Tried making a thread at init2winit forums but have not gotten any response over there. Anyone here willing to help me out? I would greatly appreciate it.
Sent from my ADR6425LVW using Tapatalk 2
that usually means you dont have enough space
Thanks for the advice. I did check my SD storage and it said that I only had 1.16GBs left. So I thought that this could be true I suppose. So I switched to int. Storage as the install location(which I have 9.67GBs available on) and its causing my phone to lock up and freeze. Happened right at the part "extracting Rom please wait..." Weird...
Sent from my ADR6425LVW using Tapatalk 2
boot manager doesnt surport rexound officially，maybe thats the final answer. i encounterred the same issue too，but when i reinstall the app，it works just fine.
Sent from my ADR6425LVW using xda premium
anubis2k3 said:
Thanks for the advice. I did check my SD storage and it said that I only had 1.16GBs left. So I thought that this could be true I suppose. So I switched to int. Storage as the install location(which I have 9.67GBs available on) and its causing my phone to lock up and freeze. Happened right at the part "extracting Rom please wait..." Weird...
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Remember to disable logging in Superuser. That also causes some major issues. Just open superuser hit settings icon, and where it says logging set it to off. You should have much better luck that way
Cool, I will try that. I've uninstalled and reinstalled multiple times, with no luck. I'm interested though. What do you guys have setup in settings?
Sent from my ADR6425LVW using Tapatalk 2
live2die said:
boot manager doesnt surport rexound officially，maybe thats the final answer. i encounterred the same issue too，but when i reinstall the app，it works just fine.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
The Rezound is supported by bootmanager.
I've never been able to get boot manager to work correctly since I've started using it back on my dinc2. Had issues installing some roms on that phone too. Which is why I think my problem may be the settings I am using. Is there specific settings I need to use for the rezound?
EDIT: After I changed the settings SU I tried again at work and it froze still and even rebooted during the install.
Sent from my ADR6425LVW using Tapatalk 2
Ok, so I finally got cm9 roms to install correctly and now when I try to boot to them it just shows the splash screen for a couple seconds and my display turns off and it never boots. I've tried with kang and paranoid with the same results. I've tried going into recovery and manually flashing the update zip for rom 1, didnt work. Can't think of what could be the problem....
Sent from a galaxy far..far..away....
anubis2k3 said:
Ok, so I finally got cm9 roms to install correctly and now when I try to boot to them it just shows the splash screen for a couple seconds and my display turns off and it never boots. I've tried with kang and paranoid with the same results. I've tried going into recovery and manually flashing the update zip for rom 1, didnt work. Can't think of what could be the problem....
Sent from a galaxy far..far..away....
Click to expand...
Click to collapse
Doesnt look like anyone has asked you this, but are you S-Off?? You need to be S-off for this to work. Also make sure when installing you wipe system/data/cache. You should be able to use the ext.4/2 either one will work. I use the ext.4 since it installs faster....alot faster.
dalvear88 said:
Doesnt look like anyone has asked you this, but are you S-Off?? You need to be S-off for this to work. Also make sure when installing you wipe system/data/cache. You should be able to use the ext.4/2 either one will work. I use the ext.4 since it installs faster....alot faster.
Click to expand...
Click to collapse
He can be HTC unlocked and s-on it will still work bootmanager still hasn't updated since the rezound got s-off... His problem sound like the boot.img does not have the right kernel installed or something
Sent from my Dinc... I mean Rezound
yojoe600 said:
He can be HTC unlocked and s-on it will still work bootmanager still hasn't updated since the rezound got s-off... His problem sound like the boot.img does not have the right kernel installed or something
Sent from my Dinc... I mean Rezound
Click to expand...
Click to collapse
only mentioning that because in the instructions for the app. If he doesnt have to be S-Off then thats strange. Only thing i could suggest after that would be redownload ROM and check MD5
dalvear88 said:
only mentioning that because in the instructions for the app. If he doesnt have to be S-Off then thats strange. Only thing i could suggest after that would be redownload ROM and check MD5
Click to expand...
Click to collapse
i understand... he could probably do a dirty install of the same rom over top and make sure it has a boot.img in the zip that is not in any of the folders
Everytime I go to make a call or receive a call the phone force closes and then signal drops off. I have flashed new kernals and have done a clean Rom install and problem continues. Any help would be greatly appreciated.
Sent from my HTC6435LVW using xda app-developers app
saabguy93 said:
Everytime I go to make a call or receive a call the phone force closes and then signal drops off. I have flashed new kernals and have done a clean Rom install and problem continues. Any help would be greatly appreciated.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Try reflashing a kernel. Might try stock first, then maybe Elkay's or dsb's writeable.
In case you're doing it a different way, try flashing it this way: flash the boot.img using the Flash Image GUI app. Then flash the corresponding modules for that specific boot.img kernel (can't mix and match) in Recovery.
If that doesn't help the situation, you may need to flash a different radio.
HTH!
saabguy93 said:
Everytime I go to make a call or receive a call the phone force closes and then signal drops off. I have flashed new kernals and have done a clean Rom install and problem continues. Any help would be greatly appreciated.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
have you tried a completly different rom?
.torrented said:
have you tried a completly different rom?
Click to expand...
Click to collapse
I have relocked my bootloader. Loaded the stock RUU and then Unlocked again, rerooted and installed Viper Rom and still same Issue.
saabguy93 said:
I have relocked my bootloader. Loaded the stock RUU and then Unlocked again, rerooted and installed Viper Rom and still same Issue.
Click to expand...
Click to collapse
Have you tried a different SIM.
Sent from my HTC6435LVW using xda app-developers app
Perhaps you accidentally flashed your radio partition? Reflash your radio and you'll probably be good to go. Either that or like someone else said try a different sim card.
Bigandrewgold said:
Have you tried a different SIM.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I put the SIM in my Nexus and I dont have any problems at all.
saabguy93 said:
I put the SIM in my Nexus and I dont have any problems at all.
Click to expand...
Click to collapse
Like the other guy said, try flashing a radio.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
Like the other guy said, try flashing a radio.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Flashed the new radio and still a no go. I keep getting "com.android.phone" force close when i go to dial a number.
Run the RUU again but this time try and just booting into android from the RUU and trying to use your phone
saabguy93 said:
Flashed the new radio and still a no go. I keep getting "com.android.phone" force close when i go to dial a number.
Click to expand...
Click to collapse
If you are getting com.android.phone fcs. then reflash ruu, DL' a rom of choice on your computer and transfer using ADB push (will take a second) . reboot to bootloader. flash boot.img, boot to recovery, flash modules, then flash custom rom. when phone reboots, wait about 45 seconds before running setup. If this process still does not work, please report back. Or PM me or another RC so we can figure it out for you in a quick manner.
Well this morning I switched to CWM recovery and loaded Digital Dream 1.5 and I'm back working. Thanks for everyone's help.
Sent from my HTC6435LVW using xda app-developers app
saabguy93 said:
Well this morning I switched to CWM recovery and loaded Digital Dream 1.5 and I'm back working. Thanks for everyone's help.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Yeah so it was a rom issue then
Sent from my HTC6435LVW using XDA Premium HD app
Not a Rom issue, I've had the problem on viper and hatka, both before and after soff and new radio. New kernel, old kernel.
I'm getting ready to try stock 1.15 before I ruu.. will report back.
Edit: Fresh off RUU, with the old radios flashed before the RUU. Still no change. Tried turning phone off, remove sim card, phone on, try to use cell connection (obvious failure), phone off, insert sim card and boot. Still no good. About to try above method using CWM and Digital Dream, as soon as it downloads.
Edit 2: Still no such luck. After digging through system logs, there's quite a few errors pertaining to the radio, IccCard, and RIL. One that particularly caught my eye was an error that there stated Ril_get_icc_status returned an error, and it should never return an error. Unfortunately, I didn't get a capture on the time I saw that, the radio reset which Su to reset which caused catlog to reset. Still have quite a few errors pertaining to SIM problems as well. I am way over my head after this point. I can interpret java, and linux.. but not so much understand when they're mixed together in Android.
http://www.pastebin.ca/2317800 This is logcat capture I got of the radio log. Unknown technology doesn't sound good to me....
http://db.tt/nbYfqEkb A full system log as soon as I could save after the force close. Couple things here and there.
I suppose if I can't get it fixed in a day or two.. off Verizon for a replacement. What's the purpose of a phone if I can't make phone calls on it?
Sent from my HTC6435LVW using xda premium
Unless an error loops continually, its okay.
Have you tried to manually select a different network? I'm not quite sure how to do it on a sense rom, but I do know that when I was messing around within my CM10 build and changed to the wrong network type, I lost 4G data in sense. I reflashed CM10, selected a different network and then flashed back and it was working.
Have no fear...
THE MAN IS HERE!!!
OK guys honestly if it's up to me, we should all be scared ****less if we were relying on me. I bought a DNA with this problem to see if I could fix it and so far I've relocked, run the RUU twice (executable 1.15) unlocked and flashed recovery and done clean rom installs, kernels, switched to every network mode imaginable. I took my sim out of my DNA working perfectly so I know the sim is good in a different DNA.
I just flashed the 2.04 radios and I'm going to see what that does. I promise I'm going to give this issue my everything though because I gave a lot for this phone that's otherwise NIB condition and MINT. OK and the radios didn't help
CharliesTheMan said:
Have no fear...
THE MAN IS HERE!!!
OK guys honestly if it's up to me, we should all be scared ****less if we were relying on me. I bought a DNA with this problem to see if I could fix it and so far I've relocked, run the RUU twice (executable 1.15) unlocked and flashed recovery and done clean rom installs, kernels, switched to every network mode imaginable. I took my sim out of my DNA working perfectly so I know the sim is good in a different DNA.
I just flashed the 2.04 radios and I'm going to see what that does. I promise I'm going to give this issue my everything though because I gave a lot for this phone that's otherwise NIB condition and MINT. OK and the radios didn't help
Click to expand...
Click to collapse
Any luck figuring this out? I have the same issue and have tried radios, kernels, ROMs, RUU, and am still getting the same error message.
jc332986 said:
I was having "com.android.phone" issues. I relocked then ran the RUU. It didn't fix the error. I unlocked, tried to go Into recovery and there was no recovery. I flashed cwm recovery, flashed busy box/superuser, and rebooted. I flashed cubed kernel. The fix for the phone was to fix permissions with system write capabilities. I'm not sure why the RUU didn't put the phone all the way back to stock.
Click to expand...
Click to collapse
spjoneser said:
I had this problem with my first DNA, warrantied it out after trying all the same things, flashing different roms, RUUing. After replacement I came across a thread somewhere and found that someone had fixed the same problem by simply fixing permissions before doing anything else, sounds like once you flash something else you're screwed.
Anyone try that first?
Click to expand...
Click to collapse
Anyone have an idea about the permissions described here?
same issue
dragonstalker said:
If you are getting com.android.phone fcs. then reflash ruu, DL' a rom of choice on your computer and transfer using ADB push (will take a second) . reboot to bootloader. flash boot.img, boot to recovery, flash modules, then flash custom rom. when phone reboots, wait about 45 seconds before running setup. If this process still does not work, please report back. Or PM me or another RC so we can figure it out for you in a quick manner.
Click to expand...
Click to collapse
This is driving me crazy I have same issue mine won't make or receive calls after I did s-off get same message com.androd.phone fcs. I re-locked phone then flashed original rom. Turned on phone still have same problem. So at that point I flashed kernalls h-boot and radios booted still same problem. Then I decided to re-flash RUU rom still same problem. Please help don't know what to do next.:crying:
jimmydee62 said:
This is driving me crazy I have same issue mine won't make or receive calls after I did s-off get same message com.androd.phone fcs. I re-locked phone then flashed original rom. Turned on phone still have same problem. So at that point I flashed kernalls h-boot and radios booted still same problem. Then I decided to re-flash RUU rom still same problem. Please help don't know what to do next.:crying:
Click to expand...
Click to collapse
I'm in the same boat with you my friend :crying:...Can someone please help us. PLEASE!!!
Running into a little hick-up with my DNA. Never seen anything like this so I'm stumped. After flashing M7 Digital Dreams V1.1, I installed the sim card from my galaxy note 2 and the phone says it's an invalid sim card. I put the card back into the Note 2 and it works fine. I then tried the sim in another friends GS3 and it worked in that phone. Not sure what's up. I tried re-wiping the phone (full wipe) and re-installing the rom. No Luck. Also tried Zone DNA rom and I get the same message. Is there something I need to flash to recognize the sim card?
Any ideas or advice is greatly appreciated!!
scheirere said:
Running into a little hick-up with my DNA. Never seen anything like this so I'm stumped. After flashing M7 Digital Dreams V1.1, I installed the sim card from my galaxy note 2 and the phone says it's an invalid sim card. I put the card back into the Note 2 and it works fine. I then tried the sim in another friends GS3 and it worked in that phone. Not sure what's up. I tried re-wiping the phone (full wipe) and re-installing the rom. No Luck. Also tried Zone DNA rom and I get the same message. Is there something I need to flash to recognize the sim card?
Any ideas or advice is greatly appreciated!!
Click to expand...
Click to collapse
Flash crpalmers 2.0 kernel and make sure to wipe cache and dalvik.
Sent from my HTC6435LVW using xda app-developers app
Well I tried flashing that kernel but it didn't help. Thanks for the suggestion though!
Have you tried RUU back to stock and then format from settings? Please be sure you're in stock Rom with stock recovery.
Sent from my HTC6435LVW using xda premium
motumbo said:
Have you tried RUU back to stock and then format from settings? Please be sure you're in stock Rom with stock recovery.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I had one that did that, had it replaced. Nothing done to it would get the calling and data back. The replacement is about to get replaced, it starts ringing on it's own, even has it's own ringtone. Cute trick.
motumbo said:
Have you tried RUU back to stock and then format from settings? Please be sure you're in stock Rom with stock recovery.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
RUU is new to me. What exactly is that? I was thinking about trying to go back to stock but wasn't sure if it was necessary. Is there a thread that shows how to RUU back to stock? Sounds like I may have to go back to stock anyhow so I can return the phone......
scheirere said:
Running into a little hick-up with my DNA. Never seen anything like this so I'm stumped. After flashing M7 Digital Dreams V1.1, I installed the sim card from my galaxy note 2 and the phone says it's an invalid sim card. I put the card back into the Note 2 and it works fine. I then tried the sim in another friends GS3 and it worked in that phone. Not sure what's up. I tried re-wiping the phone (full wipe) and re-installing the rom. No Luck. Also tried Zone DNA rom and I get the same message. Is there something I need to flash to recognize the sim card?
Any ideas or advice is greatly appreciated!!
Click to expand...
Click to collapse
I'm having a somewhat similar problem, but not to your extent. I've flashed the same ROM you mention above and when leaving a Wifi connection to 4G (like when I leave my house and get in the car), my sim card gives an error. I get it back to working properly by rebooting, but it's a pain.
This occurs for me on other Sense 5 ROMS too.
Well I just got off the phone with vzw customer service and they are sending out a new phone. According to the rep, the latest update that rolled out on 4/15 was supposed to address this sim card issue. Specifically the "PUK locked" message, which is what I was getting when I flashed back to the latest stock ROM.