Stock rom & root - system status problem - Galaxy S III Q&A, Help & Troubleshooting

Hai there,
I've problem with system status in download mode, on rooted stock xeo jb rom on my gt-i9300.
System status: Samsung official - custom
First problem appears after updating system to jelly bean, cf root-ing and using triangle away - system status remains as listed above.
I've readed, that the problem isn't root, but custom recovery installed with cf.
So:
I flashed rom again, and rooted using s3 toolbox - clear root, without flashing reco. Used triangle away and... nothing. Still Samsung official - custom is showed.
Halp.
Send from my Samsung Galaxy S3 using Tapatalk 2 & Swype

xStagGx said:
Hai there,
I've problem with system status in download mode, on rooted stock xeo jb rom on my gt-i9300.
System status: Samsung official - custom
Correct .
First problem appears after updating system to jelly bean, cf root-ing and using triangle away - system status remains as listed above.
YES as posted multiple times run TA then flash stock rom then factory reset .
jje
Click to expand...
Click to collapse

Hey, thanks for your reply!
I knew this trick before, but unfortunately, on jb it doesn't work for me. Today i followed those steps again:
Factory format - flash via Odin - flash root using s3 toolbox (w/o recovery) - TA - factory format
And still system/binary status is Samsung official - custom
note that factory format has been made by code.
Send from my Samsung Galaxy S3 using Tapatalk 2 & Swype

xStagGx said:
Hey, thanks for your reply!
I knew this trick before, but unfortunately, on jb it doesn't work for me. Today i followed those steps again:
Factory format - flash via Odin - flash root using s3 toolbox (w/o recovery) - TA - factory format
And still system/binary status is Samsung official - custom
note that factory format has been made by code.
Send from my Samsung Galaxy S3 using Tapatalk 2 & Swype
Click to expand...
Click to collapse
Why not follow the steps i gave ..
Run TA
Flash STOCK firmware and factory reset after .
Possible of my method does not work its the root program you use .
Also see post regarding rom counter not resetting posted in the last few days .
jje

Does this method works with cf root?
After flashing rom and rooting shouldn't I use triangle before factory reset?
Send from my Samsung Galaxy S3 using Tapatalk 2 & Swype

Repeat
Run TA ( you will obviously need to be rooted and i have no knowledge of any other root method bar CF Root )
Flash stock rom via Odin .
Reboot
Factory reset
Check status .
jje

Followed your steps - still the same :<
could you give me link to thread you talking about?

JJEgan said:
Repeat
Run TA ( you will obviously need to be rooted and i have no knowledge of any other root method bar CF Root )
Flash stock rom via Odin .
Reboot
Factory reset
Check status .
jje
Click to expand...
Click to collapse
xStagGx said:
Followed your steps - still the same :<
could you give me link to thread you talking about?
Click to expand...
Click to collapse
Stag I could be wrong but if you follow JJEgans steps you should be fine but the second u apply root after your fresh install youll get a custom status again. Also if your using mobile odin pro to flash stock rom youll more than likely have ever root selected and again this will keep the custom status as your newly flashed rom will have root.(i.e modified so custom)

That's the problem, on ics i could have official status with root, and working OTA, even with modified nfc.apk to trigger nfc while screen was off, just used TA...
On jb, after flashing cf or other root w/o custom recovery neither factory format and TA works... TA just resets flash counter and system status to Samsung official, but binary remains "custom", so automatically OTA stops working >.<
Send from my Samsung Galaxy S3 using Tapatalk 2 & Swype

Related

[SOLVED][XXBLFB] How to delete root ?

Hi everyone, today I've obtained XXBLFB by OTA on my samsung Galaxy s3 and before I was in lf2 with CF root (last version) .
Since I've updated I don't have superuser rights anymore on some applications, and finally I want to unroot my device, but SuperUser app is still on my phone, and the phone status is : Custom .
I was okay to flash stock kernel but I don't have it, there's only roms , if I re-flash the rom will the root delete himself ?
Because I just get the rom by ota and it's still here .
Please help :laugh:
nasksnake said:
Hi everyone, today I've obtained XXBLFB by OTA on my samsung Galaxy s3 and before I was in lf2 with CF root (last version) .
Since I've updated I don't have superuser rights anymore on some applications, and finally I want to unroot my device, but SuperUser app is still on my phone, and the phone status is : Custom .
I was okay to flash stock kernel but I don't have it, there's only roms , if I re-flash the rom will the root delete himself ?
Because I just get the rom by ota and it's still here .
Please help :laugh:
Click to expand...
Click to collapse
You have to root your phone again with the latest CF Root and install TrianleAway 1.51 and reset the flash counter and reset the status. After reboot go in the SU app and delete root and reboot.
Ok thanks i'll do that , but CF-Root-SGS3-v6.4.zip is not downloadable right now ? chainfire website isn't working ,do you have this file please ?
nasksnake said:
Ok thanks i'll do that , but CF-Root-SGS3-v6.4.zip is not downloadable right now ? chainfire website isn't working ,do you have this file please ?
Click to expand...
Click to collapse
Not working, give me gmail account and i mail it
thanks but the folder in the link appears to be empty
nasksnake said:
thanks but the folder in the link appears to be empty
Click to expand...
Click to collapse
The CF Root link is working http://download.chainfire.eu/196/CF-Root/SGS3/CF-Root-SGS3-v6.4.zip.
nasksnake said:
Hi everyone, today I've obtained XXBLFB by OTA on my samsung Galaxy s3 and before I was in lf2 with CF root (last version) .
Since I've updated I don't have superuser rights anymore on some applications, and finally I want to unroot my device, but SuperUser app is still on my phone, and the phone status is : Custom .
I was okay to flash stock kernel but I don't have it, there's only roms , if I re-flash the rom will the root delete himself ?
Because I just get the rom by ota and it's still here .
Please help :laugh:
Click to expand...
Click to collapse
if you are unrooting for waranty purpose, just unrooting and unistalling root apps are not enough, you have to flash the stock firmware through ODIN, after reseting counter with Triangle Away. Samsung service center can make out by simply booting your phone, since T-Away can not reset the status of your phone showing "modified" in the status of the phone in about phone menu,
so just follow the steps for these mentioned by Chainfire in his CF-root thread
ZACQ8 is right, just hope your up to flashing with Odin.
Here is a tutorial how i did it:
If you want to use Odin first download a stock firmware from www.sammobile/firmware, pick the rom of your country and download it.
Extract it once from .rar to md5 file.
Readup a bit, it isn`t hard but there are a few things you must know:
1. Enable usb debugging on your phone
2. Go into downloadmode (volume down + power + menu all at the same time)
3. See if IDCOM light up yellow and in the left bottom window it says added when you connect your phone to the pc.
4. Unzip the downloaded file ONCE into a .tar or md5 file if you haven`t
5. Place that file in the PDA section.
6. Do not tick anything, only f.reset.time and autoreboot should be ticked.
7. Start
8. Rebooting automaticly.
Close Kies, also everthing Kies related in task manager before flashing!
ZACQ8 said:
if you are unrooting for waranty purpose, just unrooting and unistalling root apps are not enough, you have to flash the stock firmware through ODIN, after reseting counter with triangle, samsung service center can make out by simply booting your phone, since triangle can not reset the status of your phone showing modified in the status of the phone in about phone menu,
so just follow the steps for these mentioned by Chainfire in his CF-root thread
Click to expand...
Click to collapse
I don't really understand, (i'm french) will I be able to totally delete root on my s3 or not ?
Chainfire website won't work
Before with my galaxy s2, event it was root in every firmware, I've reflash a stock firmware and warranty worked, impossible for S3 ?
and, btw I don't have any triangle or other thing, I just have flash counter
edit : finally i'll do that :
"- Use Triangle Away to reset the flash counters, and pull the battery immediately after rebooting starts
- Boot into recovery and perform a wipe, and pull the battery immediately after rebooting starts
- Go to SamMobile and get the stock firmware for your region
- Flash that stock firmware on your device
- Let Android boot, go through device setup (without doing any logins) until Android is fully usable again
- Reboot
- Wait at least 10 minutes
- Check Settings->About device->Status and make sure Device status is not "Modified"
- Perform another factory reset
- Boot into download mode and make sure the flash counter and system status are all set to official"
Thanks
nasksnake said:
I don't really understand, (i'm french) will I be able to totally delete root on my s3 or not ?
Chainfire website won't work
Before with my galaxy s2, event it was root in every firmware, I've reflash a stock firmware and warranty worked, impossible for S3 ?
and, btw I don't have any triangle or other thing, I just have flash counter
edit : finally i'll do that :
"- Use Triangle Away to reset the flash counters, and pull the battery immediately after rebooting starts
- Boot into recovery and perform a wipe, and pull the battery immediately after rebooting starts
- Go to SamMobile and get the stock firmware for your region
- Flash that stock firmware on your device
- Let Android boot, go through device setup (without doing any logins) until Android is fully usable again
- Reboot
- Wait at least 10 minutes
- Check Settings->About device->Status and make sure Device status is not "Modified"
- Perform another factory reset
- Boot into download mode and make sure the flash counter and system status are all set to official"
Thanks
Click to expand...
Click to collapse
Dude, as you told before, when you updated through OTA XXLF2 to XXLBFB your root access already desabled, your phone is no more rooted now,
tell me what you really want now, do you want to root your phone again???
EDIT : yes you have to follow the above steps to get a fully factory fresh phone...
I had to re-root because I need to use triangle away, but I want to clean my phone ,no more root, I will follow the step below
Thanks !
In fact: I tought it was impossible to get back my warranty
Thanks for all ! :good:
nasksnake said:
I had to re-root because I need to use triangle away, but I want to clean my phone ,no more root, I will follow the step below
Thanks !
In fact: I tought it was impossible to get back my warranty
Thanks for all ! :good:
Click to expand...
Click to collapse
you are right...reroot with CF-root , use Triangle away, flash new firmware.....
report back once you have done all successfully --- Goodluck
It worked, thanks for your help !
With wipe I lose usb storage too (internal) ,it's not like my galaxy s2 before but anyway , now status is "Normal"

[Q] Help did i reset the download counter?!

Bascially got my galaxy S2 I9100 a few weeks ago , i am pretty familiar with android and know my way about , so the first thing i did was root stock ROM with Cf Root then the second thing i did was flash the Siyah Kernel via odin then dual booted a few roms such as RR or Paranoid Android. As the Siyah kernel enables dual boot i kept my stock 4.0.3 but replaced the launcher with the touchwhiz ux launcher found on the galaxy s3. Since i have flashed various roms and also removed them ect. I have been seeing on XDA that alot of people sent their galaxy s2 to warranty and it didnt get fixed as the "download counter" showed that custom software had been obtained and flashed within the device & that one way to fix it was by downloading well known developer chainfires "Triangle Away" apk in order to remove the triangle at boot as well as reseting the download counter to 0. i am just confused as this is what i done get.
-Say i send my device for warranty and i have restored stock ics GS2 rom kernel and so on will they be able to tell without me using chainfires
"triangle away app?"
-If somehow i encounter a "softbrick" or "hardbrick" could i just buy a usb jig enter download mode, plug it in, restore counter to 0 then flash stock ics & kernel for GS2 via odin & get it fixed free by warranty?
thank alot
xiFIL said:
Bascially got my galaxy S2 I9100 a few weeks ago , i am pretty familiar with android and know my way about , so the first thing i did was root stock ROM with Cf Root then the second thing i did was flash the Siyah Kernel via odin then dual booted a few roms such as RR or Paranoid Android. As the Siyah kernel enables dual boot i kept my stock 4.0.3 but replaced the launcher with the touchwhiz ux launcher found on the galaxy s3. Since i have flashed various roms and also removed them ect. I have been seeing on XDA that alot of people sent their galaxy s2 to warranty and it didnt get fixed as the "download counter" showed that custom software had been obtained and flashed within the device & that one way to fix it was by downloading well known developer chainfires "Triangle Away" apk in order to remove the triangle at boot as well as reseting the download counter to 0. i am just confused as this is what i done get.
-Say i send my device for warranty and i have restored stock ics GS2 rom kernel and so on will they be able to tell without me using chainfires
"triangle away app?"
-If somehow i encounter a "softbrick" or "hardbrick" could i just buy a usb jig enter download mode, plug it in, restore counter to 0 then flash stock ics & kernel for GS2 via odin & get it fixed free by warranty?
thank alot
Click to expand...
Click to collapse
u could just root ur phone, install triangle away, run it, and all set.
uninstall any app that indicates that ur phone is rooted and there. also u could flash an unrooted kernel too.
when i had to live my phone at service i did this:
-used triangle away
-factory resets
-wipe dalvik and cache
-flashed via ODIN stock ICS rom
-give it to service!
pelpa87 said:
u could just root ur phone, install triangle away, run it, and all set.
uninstall any app that indicates that ur phone is rooted and there. also u could flash an unrooted kernel too.
when i had to live my phone at service i did this:
-used triangle away
-factory resets
-wipe dalvik and cache
-flashed via ODIN stock ICS rom
-give it to service!
Click to expand...
Click to collapse
so when it is rooted or has a custom rom i use triangle away then-
& what do you mean factory resets? & then i flash custom stock ics? & how can i wipe dalvik cache when it is not rooted?!
xiFIL said:
so when it is rooted or has a custom rom i use triangle away then-
& what do you mean factory resets? & then i flash custom stock ics? & how can i wipe dalvik cache when it is not rooted?!
Click to expand...
Click to collapse
He simple said:
When you are on a custom rom or rooted rom, use triangle away to reset the counter.
Then do a factory reset and wipe cache/dalvik cache by using custom recovery mode. (you are still rooted)
Then flash an official stock kernel via odin (it will not increase the counter)
The counter will say no and binary official and you have unrooted new firmware
with no way to know you messed around with it. Warranty reclaimed!!
aziz981 said:
He simple said:
When you are on a custom rom or rooted rom, use triangle away to reset the counter.
Then do a factory reset and wipe cache/dalvik cache by using custom recovery mode. (you are still rooted)
Then flash an official stock kernel via odin (it will not increase the counter)
The counter will say no and binary official and you have unrooted new firmware
with no way to know you messed around with it. Warranty reclaimed!!
Click to expand...
Click to collapse
exactly! U stated that u r on a custom rom..so i supposed u have cwmr..then u can follow the steps i mentioned
Sent from my GT-I9100 using xda premium

[Q] How to unroot and reenable Kies Updates?

hi i got a 16GB I9300 rooted with CF-Auto Root.
How can i unroot it completely so that kies updates work again?
i got the stock rom i want.
i think if i flash it over the rooted rom, the cfroot files wont be deleted and so the status will still be modified nd kies wont work, what are the correct steps so is factory state?
0mega007 said:
hi i got a 16GB I9300 rooted with CF-Auto Root.
How can i unroot it completely so that kies updates work again?
i got the stock rom i want.
i think if i flash it over the rooted rom, the cfroot files wont be deleted and so the status will still be modified nd kies wont work, what are the correct steps so is factory state?
Click to expand...
Click to collapse
Reset the flash counter with Triangle Away, flash the stock rom with Odin and perform a data/factory reset after reboot in settings/backup and restore. Now you can update with Kies/OTA and status will say NORMAL.
gee2012 said:
Reset the flash counter with Triangle Away, flash the stock rom with Odin and perform a data/factory reset after reboot in settings/backup and restore. Now you can update with Kies/OTA and status will say NORMAL.
Click to expand...
Click to collapse
Thanks! :good: im getting rid of my 16GB S3 before it fails with the SDS issue and getting a 32GB one
Mine is like 3 months used and no problems but i wont take a chance on it failing

From CM 10.1 to Stock ROM for repair + Questions about TriangleAway (PLS QUICK HELP)

Hi guys,
my home-button of my i9300 is very buggy and loose, so I want to give it in for repair!
At the Moment i use Jelly Bam (AOSP - CM 10.1 based on 4.2.1)
so for my warranty i have to unroot etc. => factory state (Stock rom with software branding)
I read some Tutorials and watch videos, but i always see people using Samsung Stock ROMs and then the start TriangleAway for reseting the counter. (the counter thing is new for me because i came from HTC Desire^^)
so my QUESTION is:
Can i start and reset TriangleAway on my AOSP-ROM-> reset the counter and then flash the STock rom with odin? Or should i flash a Samsung ROM and after that i shoud use TriangleAway ?!
Quote from TriangleAway-Thread
Note#2: on new devices like the SGS3/SGNote2/SGNote10.1, the "system modified" status can only be reset on some firmwares - they must be stock firmwares!
Click to expand...
Click to collapse
sry but i dont want to hurt my device or brick it
pleeeeeeeeease help me!!!!! thx
You could try it, but I recommend going to a stock rom, then using CF-Root, then immediately boot back up and unroot in SuperSu, And then wipe data and you should be fine.
Thinking of it because AOSP requires a custom kernel and recovery the bootloader will detect those and automatically set your flash counter to 1, you have to be on completely stock, then you can use CF-root, etc.
TheCraig said:
You could try it, but I recommend going to a stock rom, then using CF-Root, then immediately boot back up and unroot in SuperSu, And then wipe data and you should be fine.
Thinking of it because AOSP requires a custom kernel and recovery the bootloader will detect those and automatically set your flash counter to 1, you have to be on completely stock, then you can use CF-root, etc.
Click to expand...
Click to collapse
thx,but i couldn't wait and flashed Samsung Stock rom with odin...so im unrooted^^
next steps?!: Root stock ROM -> use Traingle Away to reset counter -> flash original branded Samsung stock rom .........right?
everything worked!
DOWNLOAD MODE:
Odin Mode
Product Name: GT- I9300
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
ready for warranty ?! :angel:
Pritti said:
everything worked!
DOWNLOAD MODE:
Odin Mode
Product Name: GT- I9300
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
ready for warranty ?! :angel:
Click to expand...
Click to collapse
i am in same situation now... can you please write step by step what you did?
currently i am on Wanamlite 4.1.2
thanks
1: flash stock via odin
2: flash Cf-root aswell
3: install and run triangle away
4: wipe data factory reset through stock recovery to remove root
then warrantyis back
mintume said:
i am in same situation now... can you please write step by step what you did?
currently i am on Wanamlite 4.1.2
thanks
Click to expand...
Click to collapse
please ask for help in the help section
http://forum.xda-developers.com/showthread.php?t=2240291

Is this phone rooted ?

I recently bought a sgs3 off someone. ive noticed it has cwm and supersu, i tried full restore but these didnt go so i went into recovery mode it says binary count 1 samsung and samsung offical. root checker says i have no root access how do i remove these software
also how do i flash a stock rom and will it brick my phone ?
Download triangle away run it to reset counters, flash stock firmware and factory reset.
Sent from my GT-I9300 using xda premium
Bachmann18 said:
I recently bought a sgs3 off someone. ive noticed it has cwm and supersu, i tried full restore but these didnt go so i went into recovery mode it says binary count 1 samsung and samsung offical. root checker says i have no root access how do i remove these software
also how do i flash a stock rom and will it brick my phone ?
Click to expand...
Click to collapse
Fail to even read the basic faqs and guides is more likely to brick your phone .
jje
Bachmann18 said:
I recently bought a sgs3 off someone. ive noticed it has cwm and supersu, i tried full restore but these didnt go so i went into recovery mode it says binary count 1 samsung and samsung offical. root checker says i have no root access how do i remove these software
also how do i flash a stock rom and will it brick my phone ?
Click to expand...
Click to collapse
You should flash stock firmware via odin here is step by step guide
http://forum.xda-developers.com/showthread.php?t=2187081
hit thanks if i helped

Categories

Resources