[Q] need cspire sbf or a way to get 3g back - Motorola Droid X2

ok i ran into a problem re flashing cm10 on my x2 had to sbf using the ntelos sbf re rooted and restored 754 boy's 2.3.6 nandroid and now i have no data, i can make calls and text but no 3g anyone know a fix for this or am i stuck till up grade. will c spire flash the correct sbf for me if i took it to them or is that a shot in the dark.

---

C Spire won't give you an sbf. I've been trying for months. Do you have a nandroid backup of the stock rom that came with your MX2? I've seen it mentioned a few times in this forum that you can sbf with the Ntelos file and then restore your nandroid backup of the stock rom and everything should be working fine. I have bricked two Milestone X2 after trying various mods and took it to my local C Spire store. All they would do is warranty the phone out and give me a new one. They could not use a sbf to reset it. Double check to make sure your data connection isn't disabled in your settings and try dialing *228 to activate your phone and see what happens.
Edit: I misread your post and see that you restored 754boy's nandroid. I'm not sure what else to tell you except what is in the last sentence of my post.

---

done the *228 thing. i have data enabled. i can make calls and text. as I've been doing research I've found out that I have no choice but to deal with it or warranty it out. i use Wi-Fi at home and the office so i think I'll deal with it for now.
Sent from my MB870 using xda premium

---

ionicone said:
done the *228 thing. i have data enabled. i can make calls and text. as I've been doing research I've found out that I have no choice but to deal with it or warranty it out. i use Wi-Fi at home and the office so i think I'll deal with it for now.
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
the easiest way is to take it to one of the techs and tell them all it needs is the correct carrier files that control connection to the network not a whole flash

---

ill try it
Sent from my MB870 using xda premium

---

Is there any possible way to get the carrier files directly from your phone so you don't have to keep going in and asking them to flash the files for you?
Sent from my DROID X2 using xda app-developers app

---

Booga Booga said:
Is there any possible way to get the carrier files directly from your phone so you don't have to keep going in and asking them to flash the files for you?
Sent from my DROID X2 using xda app-developers app
Click to expand...
Click to collapse
in theory yes there is how ever you would need to know exactly what files and where they are. also restoring them would be a pain without extensive knowledge on how they work or someone with the knowledge to create a walk through.

---

any update on getting the files written to your phone?

---

No I've been busy with work and haven't had a chance to go in. Will try Saturday.
Sent from my MB870 using xda premium

---

have you checked your apn settings
these may help,
http://www.droidxforums.com/forum/droid-x-help/45856-apn-help.html
http://rootzwiki.com/topic/1329-tutorialaosp-us-cellularc-spire-ntelos-mms-apn-settings-all/

---

Did you ever get this problem sorted out? I'm trying to fix a MX2 I accidentally bricked while attempting to flash. I SBF'd but all carrier settings got changed to Verizon. Well I flashed a Sprint PRL to it and that allowed me to activate the phone again. Calling and texts work fine but no data at all, just like the OP.

---

first read the mx2 thread, if you have not yet
2 if you need to sbf only use sbf_flash not rsd |ite
3 you maybe able to fix by changing apn settings
4 if changing apn does not fix, you will need to take back to store, and have it reflashed
Sent from my XT862 using xda premium
---------- Post added at 07:54 PM ---------- Previous post was at 07:53 PM ----------
see my list for links
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs.... https://docs.google.com/document/d/1Goawxdx_UBF4Y8lqzHYWf8Ha3yUcRK4faq0UWIlXLWA/edit
Sent from my XT862 using xda premium
---------- Post added at 08:02 PM ---------- Previous post was at 07:54 PM ----------
http://forum.xda-developers.com/showthread.php?t=2101633
Sent from my XT862 using xda premium

---

sd_shadow said:
first read the mx2 thread, if you have not yet
2 if you need to sbf only use sbf_flash not rsd |ite
3 you maybe able to fix by changing apn settings
4 if changing apn does not fix, you will need to take back to store, and have it reflashed
Sent from my XT862 using xda premium
Click to expand...
Click to collapse
APN settings are only good for SMS or MMS settings..... I think. Anyway, I took it to cspire and they were clueless. All they tried to do was *228, which I had already done. Factory reset wasn't working either. Anyway all they could advise me to do was an upgrade since my warranty expired 2 damn weeks ago. They need to have REAL techs working in there.
I'm gonna keep experimenting.......

---

did you?
menu>system settings>battery & data manager>data delivery
check 'data enabled'
check 'background data'

---

sd_shadow said:
did you?
menu>system settings>battery & data manager>data delivery
check 'data enabled'
check 'background data'
Click to expand...
Click to collapse
Yup tried that too

---

I do not know, can settings be checked from radiocomm?
if so maybe someone on cspire, could save the settings, or get a screenshot

---

sd_shadow said:
I do not know, can settings be checked from radiocomm?
if so maybe someone on cspire, could save the settings, or get a screenshot
Click to expand...
Click to collapse
Hmm never tried that. Hopefully someone can pull that info so I can have something to compare.

---

if there has ever been an c spire mx2 ota update, and if someone saved it
it can be flashed, in flashmode, with moto-fastboot.exe
at least parts of it can, not sure if all moto updates flash the radio
I know with the D2G the 2.2 to 2.3.3 changed the radio
there is an update.zip for MX, have no idea what that would do to MX2
[ZIP]Cellular South (C Spire) OTA GB 2.3.5 Update zip
could really hard brick it, ,if it didn't, maybe could flash a MX2 sbf with sbf_flash
but that's something you try just before you toss it in the trash

---

sd_shadow said:
if there has ever been an c spire mx2 ota update, and if someone saved it
it can be flashed, in flashmode, with moto-fastboot.exe
at least parts of it can, not sure if all moto updates flash the radio
I know with the D2G the 2.2 to 2.3.3 changed the radio
there is an update.zip for MX, have no idea what that would do to MX2
[ZIP]Cellular South (C Spire) OTA GB 2.3.5 Update zip
could really hard brick it, ,if it didn't, maybe could flash a MX2 sbf with sbf_flash
but that's something you try just before you toss it in the trash
Click to expand...
Click to collapse
If the update is to 2.3.5 it will bomb if it is to update to 2.3.6 it will bomb. Sbf flash is one of the only ways to safely sbf and still retain carrier information to allow data access. If you have already flashed the ntelos sbf with rsd lite then the only thing that can bring back data is to find an ota for 2.3.6 and modify your build.prop to 2.3.5 to let the stock recovery flash it. Or take it to your carrier and have them reflash the phone with their sbf. Sad fact but I've had it happen too much till I switched to sbf flash.
Sent from my Nexus 7 using XDA Premium HD app

---

Lrs121 said:
If the update is to 2.3.5 it will bomb if it is to update to 2.3.6 it will bomb. Sbf flash is one of the only ways to safely sbf and still retain carrier information to allow data access. If you have already flashed the ntelos sbf with rsd lite then the only thing that can bring back data is to find an ota for 2.3.6 and modify your build.prop to 2.3.5 to let the stock recovery flash it. Or take it to your carrier and have them reflash the phone with their sbf. Sad fact but I've had it happen too much till I switched to sbf flash.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I tried sbf_flash using Ubuntu via VMware. It detected my phone but failed to flash each time. Could you elaborate on what to edit in the build.prop. That sounds easy since I've edited it before to add and change certain stuff......then again, would still need that 2.3.6 OTA and I've never seen one around. I'm not even going to waste my time or gas by taking it to Cspire. The people in there are useless when it comes to technical stuff like this.