Related
i tried flashing with ordin3, in the middle (or maybe beggining or end not sure) i got the blue screen and now when i try and boot my galaxsy s 2 it doesnt boot up. doesnt power up or anything.. what should i do!?!
Mobiletechvideos has a service they can revive it. I had to use them for my infuse about a month ago. Service is top notch and I believe it cost 40 bucks which IMO isn't bad.
Sent from my SAMSUNG-SGH-I777 using xda premium
rbisrxx85 said:
i tried flashing with ordin3, in the middle (or maybe beggining or end not sure) i got the blue screen and now when i try and boot my galaxsy s 2 it doesnt boot up. doesnt power up or anything.. what should i do!?!
Click to expand...
Click to collapse
Try taking battery completely out then with Odin open hold up and down volume plug USB cable into phone from pc. Should load download mode. I had this happen when I had the captivate.
If everything else fails, buy or make a USB JIG. It can put your phone into download mode easily.
foxbat121 said:
If everything else fails, buy or make a USB JIG. It can put your phone into download mode easily.
Click to expand...
Click to collapse
when my infuse was hosed and I wouldnt power on no JIG, battery pull or anything would bring it back.....
rbisrxx85 said:
i tried flashing with ordin3, in the middle (or maybe beggining or end not sure) i got the blue screen and now when i try and boot my galaxsy s 2 it doesnt boot up. doesnt power up or anything.. what should i do!?!
Click to expand...
Click to collapse
WHAT were you flashing? Unless you flashed something from the I9100 that had bootloaders, you shouldn't have been able to hardbrick the device.
foxbat121 said:
If everything else fails, buy or make a USB JIG. It can put your phone into download mode easily.
Click to expand...
Click to collapse
I have yet to see a situation where a jig would've worked and VolUp + VolDn + USB insertion didn't.
Entropy512 said:
WHAT were you flashing? Unless you flashed something from the I9100 that had bootloaders, you shouldn't have been able to hardbrick the device.
I have yet to see a situation where a jig would've worked and VolUp + VolDn + USB insertion didn't.
Click to expand...
Click to collapse
then obviously you havent had a totally hard bricked phone. I jig and or Volup+voldn + USB wouldnt even phase mine at all.... it could be I was just a rare case....
and no disrespect intended for this post Entropy...i re-read it and it sounds much different then I wanted it too
i dunno what i did im a noob and now very upset i even tried anything. i tried taking the battery out then pressing vol up & down and plugging in the usb, didnt work.. i dont have a jig yet so i cant try it and i dont want to spend 60$ sending it out but if i must i guess that my option for now..
I download Odin3execute i think it was called, plugged in the gs2 and press start.. there were two buttons START and MASTER CLEAN (I think it was), After i clicked start it wrote a few lines and said please wait or dont unplug or something, then after 15-20 min my computer crashed and now it doesnt power on...
please help :'(
sounds like you flashed new (and the wrong) bootloaders. if thats the case, you're going to have to get it revived because nothing else will work
nyydynasty said:
sounds like you flashed new (and the wrong) bootloaders. if thats the case, you're going to have to get it revived because nothing else will work
Click to expand...
Click to collapse
how do i go about reviving it? should i just send it in to mobiltechvideos? will that help?
rbisrxx85 said:
how do i go about reviving it? should i just send it in to mobiltechvideos? will that help?
Click to expand...
Click to collapse
yes they can revive it for you
do u think ill be able to go to att and return it? tell them that its just not booting and lie and tell them i didnt try and root? or will they know i tried to root?
go give that a shot.. all they can say is you screwed it up ... right??
bkeaver said:
go give that a shot.. all they can say is you screwed it up ... right??
Click to expand...
Click to collapse
I hope so.. they can prob also find out what happened and have att charge me for the phone .. not sure tho, def would not be cool lol
rbisrxx85 said:
do u think ill be able to go to att and return it? tell them that its just not booting and lie and tell them i didnt try and root? or will they know i tried to root?
Click to expand...
Click to collapse
if they wanted to find out the truth, i'm sure they can. I'm always against doing that because you knew the risk and still proceeded without reading but its your phone, not mine.
yeah I'm not really sure they scrutinize things that closely unless maybe you keep returning the phone for the same issue multiple times...
bkeaver said:
then obviously you havent had a totally hard bricked phone. I jig and or Volup+voldn + USB wouldnt even phase mine at all.... it could be I was just a rare case....
and no disrespect intended for this post Entropy...i re-read it and it sounds much different then I wanted it too
Click to expand...
Click to collapse
That's exactly what I said - it's next to impossible to hardbrick a phone unless you flash bootloaders (which it seems like he somehow did) - and if your bootloaders are broken, jig won't work.
So my original claim stands - I know of no situation where jig will work and volup + voldn + USB insertion won't.
Entropy512 said:
That's exactly what I said - it's next to impossible to hardbrick a phone unless you flash bootloaders (which it seems like he somehow did) - and if your bootloaders are broken, jig won't work.
So my original claim stands - I know of no situation where jig will work and volup + voldn + USB insertion won't.
Click to expand...
Click to collapse
wasnt disagreeing with you... was just stating a experience I had personally...
well technicaly i didnt get to flash anything because my pc got blue screen in the middle of the process..
so will sending it to that site not work?
only me... only me! tsk tsk shoulda stuck with an iphone...
lol jk i loved the phone and i want it BACK!
thnx again for all the reply's more will be welcome! please
Sending it out to that site will still work for sure.
Sent from my SAMSUNG-SGH-I777 using xda premium
I've seen a section on how to use the jig device but I don't think its going to work. Heres the thing, my phone is completely dead, no "Vibrant" screen, no download in anyway possible, no charging screen. Is there hope? Please help me :'(
This happened to me once, I could not get it to respond in anyway what so ever.... after being pissed and leaving it alone for about 20 minutes I came back and tried this...
1. Open your phone and take our your sim card, battery and external sd if you have one
2. Plug in your usb cord
3. Hold volume up and down, DO NOT HOLD POWER only volume buttons
4. Place battery back in phone and watch for the screen to respond
5. Release Volume up and down buttons
This method got me in to download mode even though I tried it like 100 times, it was only until after I let me phone sit for a little bit did it respond. Even if you have already tried this.... try it again. I went thru the same thing.
Solissfiend said:
This happened to me once, I could not get it to respond in anyway what so ever.... after being pissed and leaving it alone for about 20 minutes I came back and tried this...
1. Open your phone and take our your sim card, battery and external sd if you have one
2. Plug in your usb cord
3. Hold volume up and down, DO NOT HOLD POWER only volume buttons
4. Place battery back in phone and watch for the screen to respond
5. Release Volume up and down buttons
This method got me in to download mode even though I tried it like 100 times, it was only until after I let me phone sit for a little bit did it respond. Even if you have already tried this.... try it again. I went thru the same thing.
Click to expand...
Click to collapse
I've tried that but I'll let the phone rest for awhile. It happened when I was updating to 2.2 from 2.1 using Kies, I wasn't rooted or anything and I had just formatted the phone prior to that.
Burner2K0 said:
I've tried that but I'll let the phone rest for awhile. It happened when I was updating to 2.2 from 2.1 using Kies, I wasn't rooted or anything and I had just formatted the phone prior to that.
Click to expand...
Click to collapse
Same thing happened to me. Did everything as written above. Nothing seemed to work. Then....I put the battery in, left it overnight to charge. Tried it all over again and... IT WORKED!!!!
Sent from my SGH-T959 using xda premium
Nthe jig woulda worked for all of you
Sent from a cell tower to the XDA server to you.
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
toryheal said:
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
Click to expand...
Click to collapse
Isn't this posted in the right section? I mean,it does regard flashing and using Odin...
toryheal said:
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
Click to expand...
Click to collapse
And no, holding vol-up and plugging in usb does nothing.
Burner2K0 said:
Isn't this posted in the right section? I mean,it does regard flashing and using Odin...
Click to expand...
Click to collapse
This is a question trying to be answered (so Q&A is proper place) this is a section for devs to post and support their work. this wasn't to flame rather to let one know
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
Burner2K0 said:
And no, holding vol-up and plugging in usb does nothing.
Click to expand...
Click to collapse
Well then i suggest trying the one where you pull out the battery and try it that way or get down and dirty and make a jig or purchase one from the link i sent you.
toryheal said:
This is a question trying to be answered (so Q&A is proper place) this is a section for devs to post and support their work. this wasn't to flame rather to let one know
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
Well then i suggest trying the one where you pull out the battery and try it that way or get down and dirty and make a jig or purchase one from the link i sent you.
Click to expand...
Click to collapse
None of the steps work. My best bet is to buy a jig, but if phone is fully bricked, will that even work at all?
Burner2K0 said:
None of the steps work. My best bet is to buy a jig, but if phone is fully bricked, will that even work at all?
Click to expand...
Click to collapse
brother it is a game of chance either you take a ten dollar lose or you take a 130 dollar lose choice is yours but the have been a many of times where the jig has saved my ass...
toryheal said:
brother it is a game of chance either you take a ten dollar lose or you take a 130 dollar lose choice is yours but the have been a many of times where the jig has saved my ass...
Click to expand...
Click to collapse
Lets just hope it works, first have to put money in my paypal account. Kind of ironic how I've flashing ROMs here and there for a good while and the day I decided to go from stock 2.1 to 2.2 using Kies, it bricks >_>
Burner2K0 said:
Lets just hope it works, first have to put money in my paypal account. Kind of ironic how I've flashing ROMs here and there for a good while and the day I decided to go from stock 2.1 to 2.2 using Kies, it bricks >_>
Click to expand...
Click to collapse
Yeah i am guessing kies may be the issue. I would suggest giving it a try and if that doesnt work mobiletech jtags now
You can contact connexion2005 he is the best.
sadly.. for every 1 post I read about someone bricking a phone while flashing custom ROM, I read 4 or 5 of people bricking w/Kies..
did you ever have any 2.3.x roms on your phone? bootloaders?
"Kies ate my phone" is still an excellent way to get a new phone regardless of the current warranty.
G1toVibrant said:
sadly.. for every 1 post I read about someone bricking a phone while flashing custom ROM, I read 4 or 5 of people bricking w/Kies..
did you ever have any 2.3.x roms on your phone? bootloaders?
Click to expand...
Click to collapse
Yes I have, I had GB bootloaders on the phone but never switched them back to Froyos BL even when I flashed 2.2 ROMS, could that have been the problem?
Burner2K0 said:
Yes I have, I had GB bootloaders on the phone but never switched them back to Froyos BL even when I flashed 2.2 ROMS, could that have been the problem?
Click to expand...
Click to collapse
I know that you said you tried odin.... have you tried the One Click unbrick by Adam O and company? Sorry... that is heimdall to most... you can set it to load boot loaders for you, maybe this can help?
Hard Brick with Kies
Just wanted to say i did the same thing when i got my vibrant, i had busy box which i think was the reason kies failed on me.... but i called Samsung and they didn't even think twice about claiming warranty. They re flashed 2.2, and i bough the phone used of eBay, give them a shot.
cmzeunges said:
I know that you said you tried odin.... have you tried the One Click unbrick by Adam O and company? Sorry... that is heimdall to most... you can set it to load boot loaders for you, maybe this can help?
Click to expand...
Click to collapse
Judging by the thread, I doubt its going to work. It needs to atleast boot, which is what my phone isn't doing. Basically it acts as if there is no battery in, doesnt boot, no download mode, no charging screen. Computer wont pick it up either.
My friend broke his i777 when trying to update to the newest AOKP (he used rom manager) I wasn't home to help him fix it and he accidentally used some vibrant tool to fix it instead of normal Odin.
So it is hard bricked, he got a jig and that's not working either. Any ideas?
Sent from my Galaxy Nexus using Tapatalk
If it is a hard brick and the jig does not work then i think you need to buy a new phone
If it's truely hard bricked, then the only option is jtag recovery. Mobile Tech Videos is a reputable vendor who can do that.
If there is absolutely no sign of life, then that is your only option. If there is any sign of life at all, then you possibly might recover the phone without that.
dirtbikerr450 said:
If it is a hard brick and the jig does not work then i think you need to buy a new phone
Click to expand...
Click to collapse
Negative. There is plenty of JTAG brick repairs. Google: mobile tech videos
Edit: sorry creepy, didn't see your post
Sent from my SGH-I897 using xda premium
MTV repaired my captivate when i hard bricked it. Odin hanged on me during a boot-loader revert and it was toast. The guy that does the repair must have some special tools cause you'd never even know my phone had been opened up just by looking at it.
He flashed a vibrant rom with bootloaders?, that's the only way to hard brick a galaxy s2 from what I've read. Did you try connecting to computer and pressing volume up and down to enter in download mode?
Provide more information.
I don't know what vibrant thing he used it could have had boot loaders he doesn't know also yes I tried all those combinations
Also I am looking into JTAG repair now thanks for the help
Edit: are we sure this will work 50$ is allot (although not too much if it works) also where can I find this MTV guy?
Sent from my Galaxy Nexus using Tapatalk
bbm21 said:
I don't know what vibrant thing he used it could have had boot loaders he doesn't know also yes I tried all those combinations
Also I am looking into JTAG repair now thanks for the help
Edit: are we sure this will work 50$ is allot (although not too much if it works) also where can I find this MTV guy?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Go to mobiletechvideos.com. $50 is worth it and he can fix it. And for whatever reason, they can't get it working , they refund your money. But they're a trusted site. They unbricked my captivate
Sent from my SGH-I897 using xda premium
Before you send it in for jtag repair...
If you havn't tried it already, try putting the phone into download mode by first removing the battery, then holding down Vol+ and vol- (but not power) while you plug in the usb cable connected to your pc. The key here is to have the battery out. If this puts you into download mode, then go to the Download Repository and flash the I777UCKH7-CL503881 Stock Binaries including bootloaders.
Re: jtag. From what I have read, you can trust mobile tech videos. $50.00 is a bit less than replacing the phone. The XDA developer Adam Outler also has done some jtag repair for folks on the captivate, and may also do the sgsII. I havn't heard lately, but some time ago he was a little cheaper than MTV.
Yes Mobile Tech videos will work perfectly for getting it fixed. I have also spoken to him on the phone many of times and he is a really cool person and very knowledgeable. He fixed my cappy back in the day and he got it to work with our sgs2s back when they first came out. Also you may see if he can apply the unbreakable mod for you while he is at it. Makes it darn near impossible to ever brick it again with bad flashes of even wrong/bad boot loaders. And $50 is way cheaper than a new phone or even insurance if you now decide to accident run it over with your car before calling att.
Sent From My KickAss ATT SGS2 SPORTING my CobraRom
I bricked my mother-inlaws captivate a while back and sent it to MTV. Had it back in 8 days, he also keeps you updated of the process. Seeing the "your phone has been resurrected " e-mail arrive was a sigh of relief. Didn't feel like hearing the wife or mom-inlaws grief
Sent from my SGH-I777 using XDA
Nuskul said:
I bricked my mother-inlaws captivate a while back and sent it to MTV. Had it back in 8 days, he also keeps you updated of the process. Seeing the "your phone has been resurrected " e-mail arrive was a sigh of relief. Didn't feel like hearing the wife or mom-inlaws grief
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Erhmm, if it's not broken, don't fix it. Should've thought of that before you flashed her device lol
Sent from my GT-I9100 using Tapatalk 2 Beta-5
Thanks guys I guess I'll have him do that
Sent from my Galaxy Nexus using Tapatalk
SGS2 AT&T Brick
Hey, Is that problem solved? I did not flash the wrong ROM but was flashing CM9 nightly on top of LD3.
Now my phone wont turn on.
I don't have JIG so if you say your problem got resolved, then I will send it to MobileTechVideo.com
thershope said:
Hey, Is that problem solved? I did not flash the wrong ROM but was flashing CM9 nightly on top of LD3.
Now my phone wont turn on.
I don't have JIG so if you say your problem got resolved, then I will send it to MobileTechVideo.com
Click to expand...
Click to collapse
Hi,
Pretty much the same problem here,tried to update hydrogen rom,wiped cache/dalvik through CWM. Installation was hanging for 10-15 minutes,i pressed power button and phone died.Doesnt respond to any button and action.
I am awaiting jig to arrive today ,and will post back if it worked,i doubt though...
2 months later...
Sent from my SGH-I777 using XDA
Jig couldnt bring it to life. Probably only thing that helps is jtag...
I felt twice with my I777..I 'played" different options, and use SuperOneClick and Odin. I did know how, but Unroot, install Stock Kernel, reinstal CWMR 5.0.5.4 and enter in Download Mode and later ..uuulaaa.....Dont ask me how...In my desesperation test all I can imagine and had a good look to save my phone.
RockRatt said:
Yes Mobile Tech videos will work perfectly for getting it fixed. I have also spoken to him on the phone many of times and he is a really cool person and very knowledgeable. He fixed my cappy back in the day and he got it to work with our sgs2s back when they first came out. Also you may see if he can apply the unbreakable mod for you while he is at it. Makes it darn near impossible to ever brick it again with bad flashes of even wrong/bad boot loaders. And $50 is way cheaper than a new phone or even insurance if you now decide to accident run it over with your car before calling att.
Sent From My KickAss ATT SGS2 SPORTING my CobraRom
Click to expand...
Click to collapse
I am wondering if AT&T would go to this level of trouble to determine if a ROM was uploaded to a phone or not to determine whether or not the warranty was voided? My phone froze under normal usage under one of the more popular ROMs. I wrote about it elsewhere so I won't write about it here again.. but it said something about encryption when rebooting and never came back from black.
My only concern is when sending it in under warranty at&t will reject and stick me for replacement bill..
Hp
---------- Post added at 08:48 PM ---------- Previous post was at 08:46 PM ----------
jcomana said:
I felt twice with my I777..I 'played" different options, and use SuperOneClick and Odin. I did know how, but Unroot, install Stock Kernel, reinstal CWMR 5.0.5.4 and enter in Download Mode and later ..uuulaaa.....Dont ask me how...In my desesperation test all I can imagine and had a good look to save my phone.
Click to expand...
Click to collapse
Did you have a continually black nonresponsive screen?
HP
heartspeace said:
I am wondering if AT&T would go to this level of trouble to determine if a ROM was uploaded to a phone or not to determine whether or not the warranty was voided? My phone froze under normal usage under one of the more popular ROMs. I wrote about it elsewhere so I won't write about it here again.. but it said something about encryption when rebooting and never came back from black.
My only concern is when sending it in under warranty at&t will reject and stick me for replacement bill..
Hp
---------- Post added at 08:48 PM ---------- Previous post was at 08:46 PM ----------
Did you have a continually black nonresponsive screen?
HP
Click to expand...
Click to collapse
Why post in a dead thread?
Bleh
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Walk me through that one, no response to anything, power and up volume results in nothing. Plugging into usb results in nothing Windows, ODIN nor Kies registers it.
vanemburghj said:
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
Click to expand...
Click to collapse
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Shirokishi said:
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Click to expand...
Click to collapse
That is what I ordered, either way on the buttons, phone is bricked to point will take very special sauce to fix it.
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
vanemburghj said:
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
Click to expand...
Click to collapse
If you can see the samsung bootloader then yeah there's hope otherwise you're gonna need the $100 fix for it.
But at least people are responding, I got no love on my end, lol
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
wase4711 said:
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
Click to expand...
Click to collapse
Well smokestack76 told you differently yesterday. He said over 20 times with a jig. Plus for $1.60 I will give it a try.
yes, for the price, if it makes you feel better, try it..
and, if you believe him, when you can find 20 others that said it did absolutely nothing, then that's your choice.
the sooner you send it in to Samsung, the sooner you will have a working phone..
If Samsung is wiling to send you a loaner phone while you're under warranty i can't see why you wouldnt do that.
I know Nintendo is awesome like that but apparently Samsung reps are quite jaded when you do something silly like ask an honest question.
I wish Samsung would honor warranty services if the device hasn't been on the market longer than year.
I'm A. Maybe he Made a mistake and wants to own up for it insted of weasling into a fraudulent phone.
B. I would be a little jaded as well when I get people calling me all day that have messed up their own phone and are now trying to steal from me.
C. Samsung does honor warranties a year after the device has been on market. YOUR WARRANTY DOES NOT GO INTO EFFECT UNTIL THE ORIGINAL DATE OF PURCHASE. not when the first one of its kind rolls off the assembly line.
Also, wase a jig does work of you are not actually bricked, if you were to be soft bricked the jig would force download mode. I had a captivate I built a jig for, first thing I did was try it on my note. Bam, download mode.
And finally op it's a micro usb jig not mini. Mini is bigger than micro
yeah bro, I know a jig works for SOME phones; it helped me bring my S2 back to life..
However, I have read many many reports of it doing nothing for the Note, so that was why I said what I did..
Plus, people are using the term "Bricked" around here in so many ways, that its hard to know what they mean when they say it..to me, a bricked phone is DEAD, and nothing but an expensive paperweight.....
I can take a video of my note going from off to download mode with nothing but my jig. However the same jig that works on both my phones is out of resistance tolerance on my brothers sgs2.
And yes bricked is used much too often,it is a term to describe when your phone is inert, has no pliability and just sits there, like the baked red clay building material it was named for.
was curious to see if the OP had any luck with the jig....
Well the jig did nothing for me. I suggest send your phone to mobiletechvideos.com for repair, he goes through the JTAG recovery method, and he also unlocked mine... he did a great job. I bricked my Note flashing a ROM for another device by mistake, could not use the jig for anything, so had it repaired. Feeling really happy now... hope this helps.
the jig isn't and was never meant to fix a hard brick...
[history lesson]
Back on captivate, certain bootloaders would disable the button combos for download and recovery, making a simple (I hate the term... But) soft brick into a much stickier situation, so it was discovered that using 300k ohms of resistance across certain pins on the usb port from a powered off state would trigger download mode in seconds, making you then able to simply odin a stock rom and try again.
It was later discovered that the jig had the same effect on the sgs2 with the added benefit of restting the flash counter.
[/history lesson]
If you flash a firmware for the international note on an i717 you will need jtag because you are indeed bricked of the hard variety.
wase4711 said:
was curious to see if the OP had any luck with the jig....
Click to expand...
Click to collapse
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
vanemburghj said:
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
Click to expand...
Click to collapse
might as well keep the jig for the couple of bucks it cost..plus, even if it doesn't work for this phone, it might work for your next one!
Hi, I have a Verizon Samsung Galaxy S3 (SCH-I535) which I recently hard bricked by flashing the wrong kernel. If I were to use a USB jig, would it force my device into download mode or not? Any help would be appreciated, because I need to fix this phone ASAP. :crying:
Bump.
I also would like to know
I have done the exact same thing. I have the i535 GS3, being the Verizon one. In a moment of severe inattention to detail, i tried to flash the international version of the omega custom rom, and hard bricked it. No response to any type of button combo, nada. I would prefer not to have to send it to be jtagged, its expensive. I'm capable of fixing it through ODIN, but i am unable to get it into download mode. would building/buying a jig solve my issue?
have your tried using ODIN
You need a jtag to repair a hard brick. I just sent mine out to a gentleman on ebay and he only charges 30 bucks. The usb jig will not do anything unless you are soft bricked.
Sent from my SPH-L710 using xda app-developers app
blitzed604 said:
have your tried using ODIN
Click to expand...
Click to collapse
yes sir, I have. The screen will not show anything. If i follow the steps to get into download mode, thus being holding volume down+power+home, then pressing volume up, will it work on a hard brick, even if nothing is displayed?
---------- Post added at 08:45 PM ---------- Previous post was at 08:39 PM ----------
gimmeitorilltell said:
You need a jtag to repair a hard brick. I just sent mine out to a gentleman on ebay and he only charges 30 bucks. The usb jig will not do anything unless you are soft bricked.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Thank you, i really would prefer not to send it away, i get a pathetic sort of anxiety when i don't have my phone, but it seems my options are awfully limited.
Could you, by any chance, direct me to aforementioned ebay gentleman?
Mattj96 said:
Thank you, i really would prefer not to send it away, i get a pathetic sort of anxiety when i don't have my phone, but it seems my options are awfully limited.
Could you, by any chance, direct me to aforementioned ebay gentleman?
Click to expand...
Click to collapse
I was a little reluctant about sending my phone off too but this guy has 100% positive feedback so I sent it in. I sent you a PM with the ebay link, didn't want to put a link up that may not be approved. Good luck with your phone.
My phone wouldn't do anything, not even a charging light, therefor it was hard bricked.
EDIT: This is the guy that repaired mine but the pricing is a little different now. Read his listing carefully and email him first so he can send you the shipping information. Good luck with your phone, this guy was fast and my phone is still running great. http://m.ebay.com/itm/281145512327?nav=SEARCH&sbk=1
US Cellular Galaxy S3 Hard Bricked
my US Cellular Galaxy S3 has recently hard bricked after attempting to install a rom called energy 2.0 when i attempted to install it said something about a boot.img i dont know if it was bad thing i dont recall and a code 7 error installation aborted.
so after it said that i just decided id keep the KitKat 4.4 rom i had and left CWM through the restart phone option. so after i hit that it turned off and never turned back on, i cant access Download Mode, Recovery Mode or anything no vibration no nada. so i recently decided to purchase a USB JIG from ebay in hopes that it will set it to download mode? however knowing that i have a US Cellular model (SCH-R830U I Believe) all of the descriptions in ebay for the JIGs say that they work for Sprint models, Verizon models and so on but nothing about them working for US Cellular models, so my question is does anyone know if it will work?, i bought it hoping it will work but i just want to know so i dont get my hopes up haha? thanks.
Did it work
Sent from my SCH-R530U using Tapatalk