I did wipe data, dalvik, battery vs and then I did choose zip from sd card and I selected cm10.zip but I have got this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do? I try install gaps.zip from sd it successed but no install cm9 and no install cm10 same error..
Which kernel u r using????
Cm 9 and cm 10 need different kernel
Sent from my MT11i
Xsi18 said:
I did wipe data, dalvik, battery vs and then I did choose zip from sd card and I selected cm10.zip but I have got this error
What can I do? I try install gaps.zip from sd it successed but no install cm9 and no install cm10 same error..
Click to expand...
Click to collapse
Read the cm10 thread. The answer is in there, not much before where you posted this post there as well....goto the thread and use the search button
I cant understand the posts I understand simple words.. I saw the other posts but its neo not neo v. I opened to the right thread this post if you dont help then go out..
I used to 3.0.A.2.42 3.4 GB with root and use cm10's kernel (in the zip boot.img)
Kernel version
2.6.32.9-perf
[email protected] #1
Is it right?
Xsi18 said:
Kernel version
2.6.32.9-perf
[email protected] #1
Is it right?
Click to expand...
Click to collapse
no,
Inside the download for cm10 is a file called boot.img
You need to flash that via fastboot in order to use cm10.
Have you unlocked your bootloader? If not you need to do that to flash kernels.
You really need to spend some time reading the stickies.
And i mean more than skimming through a few threads for 10 minutes.
Before i did anything to my phone for the first time I spent a couple of days reading threads.
Read and learn, all the information has already been posted in the stickies.....
I flashed boot.img in cm10.zip file but same error.. It can be happened on GB? Should I flash 4.0.4 for cm10? I used to GB when trying flash cm10..
Xsi18 said:
I flashed boot.img in cm10.zip file but same error.. It can be happened on GB? Should I flash 4.0.4 for cm10? I used to GB when trying flash cm10..
Click to expand...
Click to collapse
You cannot flash it as a zip!!!!!!!!!!!!!!!!!!!
FFS, have you unlocked your bootloader? Can you access fastboot? Do you know the difference between recovery and flashboot? Do you know this
Code:
fastboot flash boot boot.img
Please answer these questions. And if the answer is no to any of them you need to READ!!!!
Want To be cheeky to people tying to help (telling people to get out )I suggest no one should help u
Enjoy fixing your phone by your self !
Sent from my Xperia Neo using XDA Premium HD app
@gregbradley I mean install from a zip
1. I unlocked bootloader
2. Flash kernel with copy to boot.img C:/SDK and open cmd cd\sdk and fastboot boot boot.img it has done
3. Open cwm and install a zip from sd card and I choosed cm10 but it doesnt install it has got this error.
I read all of thing I make them correct but what is this status 7 I dont know..
@kormatoes get the hell out of here dont make post in my thread..
Xsi18 said:
@gregbradley I mean install from a zip
1. I unlocked bootloader
2. Flash kernel with copy to boot.img C:/SDK and open cmd cd\sdk and fastboot boot boot.img it has done
3. Open cwm and install a zip from sd card and I choosed cm10 but it doesnt install it has got this error.
I read all of thing I make them correct but what is this status 7 I dont know..
@kormatoes get the hell out of here dont make post in my thread..
Click to expand...
Click to collapse
I think I dont want to help you anymore. You dont follow instructions, are to lazy to read up and learn things and you are rude.
Lets see how far you get on your own. Maybe then you will learn to follow the rules and be pleasent to people who want to help you.
Xsi18 said:
@kormatoes get the hell out of here dont make post in my thread..
Click to expand...
Click to collapse
For someone who is asking for help, you are pretty rude.
If you stop being ******* for a second, you could realize that you are actually getting answers, you just don't see them.
And about you reply in other thread, who knows, maybe I'm younger than you, although I doubt that, but I'm sure not acting younger than you.
Anw, with that attitude I wish you luck in solving you problems.
EOD.
Install FTF file ics 4.04
flash kernel
flash ROM
Flash gapps
Last word...don't dare to install Kormatoes ROM ever if you say like that to him.
KOrmatoes ROM is great than CM9,10 if you know....
Don't be smart-ass I open thread for ask you say read bla bla I read necessary stick thread and opened this thread you came to me and still say read.. facepalm..
OP, I strongly suggest if you want people to help you (which they are trying to do), that you behave in a more respectful manner.
xsi18 said:
@gregbradley i mean install from a zip
1. I unlocked bootloader
2. Flash kernel with copy to boot.img c:/sdk and open cmd cd\sdk and fastboot boot boot.img it has done
3. Open cwm and install a zip from sd card and i choosed cm10 but it doesnt install it has got this error.
I read all of thing i make them correct but what is this status 7 i dont know..
@kormatoes get the hell out of here dont make post in my thread..
Click to expand...
Click to collapse
no problem stay out mine permanently
ΔΩkpΣd βΨ kΩrmΔ
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The STOCK stock rom
I am releasing stock updates for unlocked users. The rom is in blob format instead of the extracted files of a rom. It can also be flashed with CWM however it is still a blob so it may take longer to flash. One of the best features of this rom is that just like stock updates it doesn't remove your apps. All apps will be optimized after install!!!
As with everything everywhere I provide no warrenty and am not responsible for anything that you do!!! I cannot guarentee that this wont fry your tablet but I will say that it shouldn't.
Note: by deffault this rom is not rooted but can be by flashing a root zip in recovery or by downloading the rooted version
Now with a ROOTED version check post 2 for links.
To add root flash the following file via CWM after the rom install is complete!
http://goo-inside.me/superuser/Superuser-3.0.7-efghi-signed.zip
To flash the blob:
Code:
adb push blobfile /sdcard/
Code:
adb shell
su
dd if=/sdcard/blobfile of=/dev/block/mmcblk0p4
reboot
Note: This can be done from a rooted rom as root (#) or from CWM recovery.
Pictures and changelog currently not necessary as this should be identical to stock.
Issues:
None, please post if you find some!
How to DOWNLOAD:
Go to post 2 and click on the download link for desired rom.
To Do:
Get user feedback
Get people to press the THANKS button --->
Thanks to Rukas on irc for giving me the push to make this rom and cky2k on irc for testing
Download links:
Note: If you want to use the blob method you can extract the blobfile from the CWM zip file.
9.4.2.21 CWM compatible signed US version
http://d-h.st/ODi
ROOTED 9.4.2.21 CWM compatible signed US version
http://d-h.st/r44
9.4.2.21 CWM compatible signed WW version
http://d-h.st/ViD
ROOTED 9.4.2.21 CWM compatible signed WW version
http://d-h.st/KH8
ENJOY!!!
Download for US stock 9.4.2.21 kernel only
http://d-h.st/g7E
Download for WW stock 9.4.2.21 kernel only
http://d-h.st/nmg
Thank you for your ROM... Hope keep your work when new releases are out....
Enviado desde mi GT-I9100 usando Tapatalk
Appreciate this. Needed straight complete stock.
Is there a way to have root with this rom?
Sent from my Transformer Prime TF201 using Tapatalk
jrac86 said:
Is there a way to have root with this rom?
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
yes after the rom has completed flashing and you rebooted and the blue bar has finished, then reboot into CWM and flash the root zip. That should give you root. The zip is located in the First post.
l33tlinuxh4x0r said:
yes after the rom has completed flashing and you rebooted and the blue bar has finished, then reboot into CWM and flash the root zip. That should give you root. The zip is located in the First post.
Click to expand...
Click to collapse
No need to reboot, flash directly su.zip after flashing ROM.
I think you include root in the ROM,
everybody will want it.
Striatum_bdr said:
No need to reboot, flash directly su.zip after flashing ROM.
I think you include root in the ROM,
everybody will want it.
Click to expand...
Click to collapse
are you saying that the root zip will work before the blob is flashed(blue bar)?
Also I may make a rooted version if what you are saying is true I could just merge the two zip files (rom and su) and be good to go.
l33tlinuxh4x0r said:
are you saying that the root zip will work before the blob is flashed(blue bar)?
Also I may make a rooted version if what you are saying is true I could just merge the two zip files (rom and su) and be good to go.
Click to expand...
Click to collapse
Hum didn't take notice that you used blob file to install..... Usually we use classic zip archive in cwm, more simple to handle, and blob only for kernel as it can't be flashed by another way.
So perhaps itwould be more simple to add Super User.apk and su binary in blob.
Striatum_bdr said:
Hum didn't take notice that you used blob file to install..... Usually we use classic zip archive in cwm, more simple to handle, and blob only for kernel as it can't be flashed by another way.
So perhaps itwould be more simple to add Super User.apk and su binary in blob.
Click to expand...
Click to collapse
Yeah I can add it to the blob. However I am still debating on doing it and if I should add the superuser apk or just have users download it from market.
Thanks for the input btw.
l33tlinuxh4x0r said:
Yeah I can add it to the blob. However I am still debating on doing it and if I should add the superuser apk or just have users download it from market.
Thanks for the input btw.
Click to expand...
Click to collapse
It depends on your faith to think people will do this by themselves without flooding the thread with 'How do I root' questions...
Thank you, exactly what I was looking for.
Quick question, since these are technically stock updates, do we need to wipe anything before flashing? Im thinking no but wanted to be sure. Thanks in advance for any help
Sent from my Kindle Fire using Tapatalk
teng247 said:
Quick question, since these are technically stock updates, do we need to wipe anything before flashing? Im thinking no but wanted to be sure. Thanks in advance for any help
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
I am thinking that you are correct. However if you run into problems do a wipe and install again.
Just flashed this and all went smooth glad to be back on stock, needed it for some kernel testing thanks!
Hi !
Can i really flash this rom on my unlocked Prime ???
With fastboot ??? (impossible to use adb "No device found""
Thanks
podezebi said:
Hi !
Can i really flash this rom on my unlocked Prime ???
With fastboot ??? (impossible to use adb "No device found""
Thanks
Click to expand...
Click to collapse
First: impossible on unlocked devices.
Two: why would you gain ? It's the exact copy of stock .21 that you have with OTA update....
Striatum_bdr said:
First: impossible on unlocked devices.
Two: why would you gain ? It's the exact copy of stock .21 that you have with OTA update....
Click to expand...
Click to collapse
it's a long story !
I try to flash AOKP rom. But i didn't have the right CWM.
So my prime didn't start !
i've just flash the 5.8.2.0 with fastboot, but now it says "no files found" when i try to flash a .zip file...
i don't know what can i do !
thanx for the answer
Can anyone confirm if you need a wipe?
Sent from my Galaxy Nexus using Tapatalk
Hello. I've got an lg p500 optimus one, which I have never updated since I got it. The lg's software always give me the same error.
Here is the phones info:
Android-version: 2.2
Kernel version: 2.6.32.9
Software version: V10C-OCT-12-2010
Click to expand...
Click to collapse
My phone is also rooted with "z4root"
I now want to breath some fresh life in to it. I am thinking about changing to a custom rom. But I am totally new to this, and doesn't want to end up with an bricked phone. What should I do first? I see there are many good guides, but I am not sure which I should take since my phone is so outdated. Does anybody got any suggestion?
Sorry if this is posted in wrong section.
Balls69 said:
Hello. I've got an lg p500 optimus one, which I have never updated since I got it. The lg's software always give me the same error.
Here is the phones info:
My phone is also rooted with "z4root"
I now want to breath some fresh life in to it. I am thinking about changing to a custom rom. But I am totally new to this, and doesn't want to end up with an bricked phone. What should I do first? I see there are many good guides, but I am not sure which I should take since my phone is so outdated. Does anybody got any suggestion?
Sorry if this is posted in wrong section.
Click to expand...
Click to collapse
download rom mananger for market....it will flash cwm recovery for u..
then download any rom(fresh cm9.) and put it in ur sd card ..
boot into recovery(by switching on ur phone while pressing vol. down+home)...and
then
wipe everything except ur sdcard ..
now flash zip from sdcard and chose the zip and done
26jtyjn said:
download rom mananger for market....it will flash cwm recovery for u..
then download any rom(fresh cm9.) and put it in ur sd card ..
boot into recovery(by switching on ur phone while pressing vol. down+home)...and
then
wipe everything except ur sdcard ..
now flash zip from sdcard and chose the zip and done
Click to expand...
Click to collapse
That won't work. You have to change to the new baseband before you use CM9. Upgrade to 2.3.3 first, then flash the rom
Sent from my LG-P500 using xda premium
using baseband fix is better thaan updating baseband and even if you want to upgrade basrband, kdz is not a good idea flashing new baseband through lgmdp is better.
Sent from my LG-P500 using Tapatalk
sachin kamboj said:
using baseband fix is better thaan updating baseband and even if you want to upgrade basrband, kdz is not a good idea flashing new baseband through lgmdp is better.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
+1 to lgmdp method
26jtyjn said:
+1 to lgmdp method
Click to expand...
Click to collapse
What method is that? And how do I start? I am a completely noob, so a guide or something would be nice. Or you can explain me yourself, but please. Dont assume that I know anything, because I dont. Hehe
Balls69 said:
Hello. I've got an lg p500 optimus one, which I have never updated since I got it. The lg's software always give me the same error.
Here is the phones info:
My phone is also rooted with "z4root"
I now want to breath some fresh life in to it. I am thinking about changing to a custom rom. But I am totally new to this, and doesn't want to end up with an bricked phone. What should I do first? I see there are many good guides, but I am not sure which I should take since my phone is so outdated. Does anybody got any suggestion?
Sorry if this is posted in wrong section.
Click to expand...
Click to collapse
Since I believe the rest of the posts are a bit too much for the beginner, I hope this post breaks it down. I'm bad at using the forum editing tools , so forgive me for bad editing.
First, your phone is old baseband. Old baseband means that the software used to access the sim card and make calls is old. It does not mean that they are no good ROMs for it. One of the most stable and up to date rom I found was OMGB (http://forum.xda-developers.com/showthread.php?t=1376344). But the bad news is that you cannot try any of the nightlies of CM9 or the deliciousness of ICS (Ice Cream Sandwhich).
This can be overcome by installing new baseband, which involves installing a new stock rom of Gingerbread. It is not as simple as flashing a zip so the easiest of the guides I found is this one (http://forum.xda-developers.com/showthread.php?t=1301489). I personally recommend you upgrade to new baseband and let me know if you don't understand the process.
Here are some good ROMs for O1 is found.
AOKP (4.4) (New Baseband) (http://forum.xda-developers.com/showthread.php?t=1613712)
Mik_OS Rom (2.3.7) (Old Baseband) (http://forum.xda-developers.com/showthread.php?t=946354)
SlimGen v1.6.0 (2.3.7) (Old/New Baseband) (http://forum.xda-developers.com/showthread.php?t=1463495)
These are some of the few of the many great ones. I currently upgraded to new baseband and am rocking AOKP and so far, I'm speechless by the CM9 awesomeness. I hope I helped. Please click the thank you button if I helped.
Balls69 said:
What method is that? And how do I start? I am a completely noob, so a guide or something would be nice. Or you can explain me yourself, but please. Dont assume that I know anything, because I dont. Hehe
Click to expand...
Click to collapse
before upgrading your phone u have to do three things
1.root your phone
2.install a custom recovery
3.update your baseband
for
1.use unlockroot tool download from unlockroot.com
http://www.unlockroot.com/guide.htm
2.download rom manager from market ...it have a option to install cwm recovery
(it is a custom recovery which will help you in installing custom rom.....)
3.use this guide to upgrade your baseband
http://forum.xda-developers.com/showthread.php?t=1149530
you have to download v20g..
after that you are ready to install new rom in your phone
download any rom
put in your sdcard root
switch off your phone
switch on your phone while pressing (vol.down+home)
this will boot you into recovery
after that
wipe everything...(format data /cache/system/boot/sdext)(do not format sdcard)
and install zip from sdcard
and choose the file
you have downloaded
thats it
reboot
Error
After I followed this guide it gave me an error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it something wrong with my phone? Everytime I have tried to updated it, there is always an error. Its like my phone is connected, but not properly connected. I have tried to update it with lg's software on 4 different computers.
And when I choose mass-storage. I still dont find my device under "My computer". But when I plug it in to the computer, it gives the normal sound. And all the drivers are installed correctly
Balls69 said:
After I followed this guide it gave me an error.
Is it something wrong with my phone? Everytime I have tried to updated it, there is always an error. Its like my phone is connected, but not properly connected. I have tried to update it with lg's software on 4 different computers.
And when I choose mass-storage. I still dont find my device under "My computer". But when I plug it in to the computer, it gives the normal sound. And all the drivers are installed correctly
Click to expand...
Click to collapse
the guide is write and i think there is a problem in your drivers
have you enabled usb debugging in your mobile...nd for safety check the stay awake button nd try again
DECRYPT WOTAN FILES
- Hi folks, here is a simple solution to decrypt wotan files, why we should pay again for a firmware that is already on our pc´s ?
- We can distribute this firmwares betwen us since we all have them!
- This works on any Xperia device!
Lets start
Warning:
a - Im no responsible if this bricks your device.
b- I have bad english, so ive made screencaptures to make this easier for you and me
1) Locate Wotan data folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Go to data/flashes and locate 3 files
Using ubuntu i discovered that those files are compressed
3) Using 7zip (or any compression software) Extract them
4) And voila, we got our files, but they are hidden.
5) Change those files extension to .sin
now they are ready for the bundle creation
6) Open Flashtool ... advanced... bundle creation.
7) Choose the folder where the files are...
8) Pass them to firmware content...
9) in device, version and branding fields put wathever you want, i put my device info, to recognize it later easier and press OK
10) Select your device if flashtool ask
11) Wait untill is finished...
12) The END, we got our FTF file to flash with Flashtool whenever we want and without paid anything!
Cheers!
If this was helpful please press Thanks button
Edit: reuploading the images!
I have downloaded many firmwares, I got 8 files there...and I have no idea which belongs to which one.
Gonna try something.
Someguyfromhell said:
I have downloaded many firmwares, I got 8 files there...and I have no idea which belongs to which one.
Gonna try something.
Click to expand...
Click to collapse
Order them by date
ChavitoArg said:
Order them by date
Click to expand...
Click to collapse
That's the problem.
Already first errors also when trying to extract, couldn't get full package.
Hmm I tried to build an FTF for my Xperia Mini firmware that I previously got off WotanServer, but FlashTool somehow gets "stuck" once it hits adsp.sin (which is like the 1st file it is trying to flash). The phone seems to be rejecting the flash.
My phone's bootloader is not unlocked though. But WotanServer was still able to flash the stock firmware (as it should be) nonetheless.
I'm thinking is it possible that maybe the files are individually encrypted in some way so the phone rejects it or something?
EDIT: Since other users have said it's successful, am I doing something wrong?
Works like a charm!!!!
Awesome, bro. Now All we need is a fully credit loades wootan account. i'm working on it, thanks.
nit3wolf said:
Awesome, bro. Now All we need is a fully credit loades wootan account. i'm working on it, thanks.
Click to expand...
Click to collapse
Press thank button if this was helpful
I'm trying to do as described but I'm having the same problem Kaiyao, the firmware is not sent to the device, stands and does nothing.
Same here, it get stucked in flashing adsp.... will try again
So i tried again several times, and yes it get stuck in that section just like other people say
I have locked bootloader... maybe thats the problem? (and yes with wotan I can flash it with no problem)
By the looks of it, from reading all the posts, if you have a locked bootloader, it is highly unlikely to work. My bootloader is unlocked and it worked perfectly for me
Edit: Nevermind it didn't work, it got stuck like everybody else's and my bootloader is unlocked :S
jacker60 said:
Same here, it get stucked in flashing adsp.... will try again
So i tried again several times, and yes it get stuck in that section just like other people say
I have locked bootloader... maybe thats the problem? (and yes with wotan I can flash it with no problem)
Click to expand...
Click to collapse
The bootloader is not the problem, mine is unlocked and don´t work, the same f.... thing, time time... dont start.
albertomuerto said:
The bootloader is not the problem, mine is unlocked and don´t work, the same f.... thing, time time... dont start.
Click to expand...
Click to collapse
So the problem ins't the bootloader, any other ideas?
I do not think the problem is in bootloader, because other ROMs operate normally.
I think there must be some script inside the files that makes them available as a cache file for wotan client re-flash only
Alright guys, in an attempt to flash my ST15i handset to the generic US ST15a firmware (I was hoping to get my 3G working for Digicel here in the Caribbean but no go, I just know the issue is baseband related but back on track), I bought some credit and downloaded the files. I managed to create a "ST15a_4.0.2.A.0.62_Generic Trade US" firmware. Here's the link http://ul.to/2sz71s80
Did you also try to flash it?To check if it works?
Sent from my ST15i
grigoris_a said:
Did you also try to flash it?To check if it works?
Sent from my ST15i
Click to expand...
Click to collapse
I'll flash it and retry just to make sure it works for you since I already flashed it (from ST15i to ST15a via the wotan server software).
Update: It's stuck at this point...
"16/023/2012 20:23:15 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE / IMEI : ***********
16/023/2012 20:23:15 - INFO - Flashing kernel.sin"
I don't know why...followed the tutorial exactly. Looks like a dud guys, my apologies. Next time I'll test and ensure it works unless someone wants to download and see where it messed up.
PS: Does anyone know if it is possible to get the bands which work for the ST15a working in the ST15i firmware (3G support to be precise)? Do I flash some software or are the bands determined by hardware (e.g. device uses a specific chip)?
Your bootloader is locked, so you can't flash kernels. Exclude it before flashing and flash again.
Sent from my SK17i using xda premium
nit3wolf said:
Your bootloader is locked, so you can't flash kernels. Exclude it before flashing and flash again.
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Thanks nit3wolf, will have to try it tomorrow though, gotta get some sleep before work in the am. By the way, am I excluding the loader or kernel before flashing?
hi everyone..
I have installed Root SD Cards by Albert Wertz, it worked awesome for the past 3-4 months.. and recently started showing browsing issues..dolphin browser take ages or doens't load pages with flash.. and nook hanged a couple of times..and today it hanged again.. I tired to restart but it keeps booting..shows N and then again N.. please suggest me what to do.. I'm searching the threads..but your help would be great..
desperately awaiting reply..
thanks..
forgot to mention.. mine is a 16gb nook tablet..
Its not bricked unless you entered recovery and formatted the system (or other partition) .
If you are trying to get back to stock, create bootable SD card recovery, and factory reset. That should do it. Do not format rom.or any partition you're unsure of coz you might brick it.
If you're looking to upgrade to cm, download a rom and flash it. (Look for roms and instructions in development section)
Satan posted while I was writing.
Do what he suggests, and if that doesn't work (I'm sure it does!):
Try the unbrick "repart.img" if it's OK to completely wipe the unit and return it to 1.4.0
A search should let you find it easy enough.
satan89 said:
Its not bricked unless you entered recovery and formatted the system (or other partition) .
If you are trying to get back to stock, create bootable SD card recovery, and factory reset. That should do it. Do not format rom.or any partition you're unsure of coz you might brick it.
If you're looking to upgrade to cm, download a rom and flash it. (Look for roms and instructions in development section)
Click to expand...
Click to collapse
Thanks.. I didn't format anything.. nook hanged for a good half hour..then I pressed power+N+volume..then it switched off..and then when I press the power button it won't turn on..and when I power it up using adapter.. it keeps showing up N logo..
and can you please suggest which one should I select in the thread there are lot of cm7, cm9 etc.. I don't even know what I have rooted using sd card method..
http://forum.xda-developers.com/showthread.php?t=1640958
satan89 said:
Its not bricked unless you entered recovery and formatted the system (or other partition) .
If you are trying to get back to stock, create bootable SD card recovery, and factory reset. That should do it. Do not format rom.or any partition you're unsure of coz you might brick it.
If you're looking to upgrade to cm, download a rom and flash it. (Look for roms and instructions in development section)
Click to expand...
Click to collapse
and can I upgrade as you have suggested to other roms from the current state of my nook ?
Well all roms are great, but make a bootable cwm from that link you posted, (I'd suggest the method 2 in first post, will give you bootable cwm5) and install cm7, since its the only rom that can be installed from cwm5. Once its up and working (and you're relieved that its not paperweight) , you can update recovery and flash newer roms.
---------- Post added at 08:57 PM ---------- Previous post was at 08:44 PM ----------
movies99 said:
and can I upgrade as you have suggested to other roms from the current state of my nook ?
Click to expand...
Click to collapse
You should be able to but from cwm try selecting factory reset first, if you want stock
Hit Thanks if I helped you!
movies99 said:
...
and can you please suggest which one should I select in the thread there are lot of cm7, cm9 etc.. I don't even know what I have rooted using sd card method..
http://forum.xda-developers.com/showthread.php?t=1640958
Click to expand...
Click to collapse
Assuming if you don't want go back to stock, I'd suggest go for a CM10 ROM (as CM7 and CM9 never got passed beta (I used to have same kind of problems with CM7 you are having) and both are no longer supported). You can use the process outlined at http://forum.xda-developers.com/showpost.php?p=35669871&postcount=1 to flash any CM10 ROM you choose: just substitute in that ROM's zip file in step 2(c).
satan89 said:
Well all roms are great, but make a bootable cwm from that link you posted, (I'd suggest the method 2 in first post, will give you bootable cwm5) and install cm7, since its the only rom that can be installed from cwm5. Once its up and working (and you're relieved that its not paperweight) , you can update recovery and flash newer roms.
Click to expand...
Click to collapse
you mean cm7_9_cwm_5.5.x_8gb-16gb ?? and after installing cwm5 how to install cm7 ?? is SD Cards by Albert Wertz [SDNT16or8gbV4.7] cm7 ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oh god.. I feel like a complete noob now..my brain so cold now that I'm troubleshooting and don't to brick it..
digixmax said:
Assuming if you don't want go back to stock, I'd suggest go for a CM10 ROM. You can use the process outlined at http://forum.xda-developers.com/showpost.php?p=35669871&postcount=1 to flash any CM10 ROM you choose: just substitute in that ROM's zip file in step 2(c).
Click to expand...
Click to collapse
thank you so much..xda is such a great community..
I'm planning to do the following now..correct me if anything is wrong..
A:
straightaway Installing CM10 Internally on Nook Tablet http://forum.xda-developers.com/showthread.php?p=35669871#post35669871
p.s. my nook still keeps showing n every 10 seconds when I connect to adapter..booting and looking for os
B:
1. first recovery to cm7_-9_cwm 5.5x
[RECOVERY + HOW-TO] NEW/OLD ClockworkMod/TWRP/Stock Recoveries for 8GB/16GB NT http://forum.xda-developers.com/showthread.php?t=1640958
2. and then install cm7 (will search for installing cm7 on cm5)
C:
or if I want to get back to my current root of albert sd card..which I don't know which cm it is..
movies99 said:
...
p.s. my nook still keeps showing n every 10 seconds when I connect to adapter..booting and looking for os
Click to expand...
Click to collapse
It will do this (booting from internal emmc /boot) if it does not find a bootable SD card (e.g., a card created via steps 1 and 2(a) in http://forum.xda-developers.com/showpost.php?p=35669871&postcount=1).
Hello everyone !!
I don't know what has happened but my rooted showed up recovering to factory reset and it auto recovered it self !! now I'm on 1.4.3 ..
thankfully my nook is working now..and I will what to root couple of days later..
thank you everyone for your support
movies99 said:
Hello everyone !!
I don't know what has happened but my rooted showed up recovering to factory reset and it auto recovered it self !! now I'm on 1.4.3 ..
thankfully my nook is working now..and I will what to root couple of days later..
thank you everyone for your support
Click to expand...
Click to collapse
Take a look at Veronica's NT reference thread in the general section.
ok the phone had booted
but if i restore the data on CWM i get fc
android.process.acore force closing
how i can fix this to take backup for my contacts
or i can do it another way by restoring it from the nandroid backup
sparxx4 said:
hii guys
i got S2 on my hand ,, i had flashed Siyah-s2-v6.0b4.tar with odin
it was on 4.0.3 stock ics ,, now the phone dont bootup ,, when it comes to the yellow tringle nothing happend after that
only black screen !!
i still can access recovery and download mode
what i miss here ??
Click to expand...
Click to collapse
do a factoru reset.of not,then re-flash firmware,and use stock kernel
i had flash this
http://forum.xda-developers.com/showthread.php?t=1286432
now i need to get the backup rom worked
it was a backup for 4.0.3 room
what kernel can run this rom ??
i didnt find a stock one with CWM
Siyah v6.0 for jellybean, if you still in ics rom download v4 or v5
http://www.gokhanmoral.com/
guys just to make it clear
a working 4.0.3 FW with cwm to restore only the data from the backup
thats what i need to do i think
any one can help me with the guied and the links
sparxx4 said:
what i miss here ??
Click to expand...
Click to collapse
What you're missing (Like many other n00bs) is the ability to read which seems to be replaced with the overwhelming urge to just blinding flash anything to their device and then afterwards create silly topics which could have been avoided by doing simple things like reading what a kernel supports.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
READ BEFORE FLASH!!!!!!
Or at least don't come crying when/if you brick device
TheATHEiST said:
What you're missing (Like many other n00bs) is the ability to read which seems to be replaced with the overwhelming urge to just blinding flash anything to their device and then afterwards create silly topics which could have been avoided by doing simple things like reading what a kernel supports.
READ BEFORE FLASH!!!!!!
Or at least don't come crying when/if you brick device
Click to expand...
Click to collapse
your post totaly un usefull
i had read and i had 3 galaxy s2
2 of them i had do them ,, but 3 third one i forgot to make backup for contacts and i want them back
so i dont see any thing noob here
i made a mistake and looking for answers and you not doing this so just stay away of this thread pleas
sparxx4 said:
your post totaly un usefull
i had read and i had 3 galaxy s2
2 of them i had do them ,, but 3 third one i forgot to make backup for contacts and i want them back
so i dont see any thing noob here
i made a mistake and looking for answers and you not doing this so just stay away of this thread pleas
Click to expand...
Click to collapse
Ok, carry on flashing random/incompatible kernels/roms to your device and see what happens. I for one will have absolutely no sympathy for you whatsoever.
Enjoy!
i will end on bricked phone i think
dude im not a noob guy i just made a stupid mistake and looking for a way back
i think flashing a stock frimeware back will make the phone boot again ,, and sorry i dont had enough time for reading its not my phone its for my sister and i shud make it work before morning
mine is Xperia S so its diffrent world
Sent from the little guy
problem solved thanks to every one
the phone booted up
flashed the stock frimware
i will try things now to get the backup work now
gastonw said:
View attachment 2097451
Sent from the little guy
Click to expand...
Click to collapse
Another one of your pics robbed :thumbup:
But it's an awesome pic. It says so much.
Sent from the little guy
sparxx4 said:
the phone booted up
flashed the stock frimware
i will try things now to get the backup work now
Click to expand...
Click to collapse
It's a bootloop not a brick, why did you flash a ROM, just a compatible Kernel was able to save you...
sadekmefti said:
It's a bootloop not a brick, why did you flash a ROM, just a compatible Kernel was able to save you...
Click to expand...
Click to collapse
i tried sya v5 kernel wich shud be work with ICS but this didnt make it work
is there any other kernel i can try ?
after restore only the data from the nandroid backup
i get this
android.process.acore has stopped unexpectedly problem, force close
how i can fix it ??? if i did i will be able to take the contact backup
sparxx4 said:
after restore only the data from the nandroid backup
i get this
android.process.acore has stopped unexpectedly problem, force close
how i can fix it ??? if i did i will be able to take the contact backup
Click to expand...
Click to collapse
after restoring the nand bkp, reboot to recovery and then,
1)wipe cache/dalvik
2)fixpermissions under advance
3) reboot ur phone and see.
4) u should also ensure that ur on the same CWM recovery (the one used to make the bkp) while restoring the bkp, to avoid conflicts
Sun90 said:
after restoring the nand bkp, reboot to recovery and then,
1)wipe cache/dalvik
2)fixpermissions under advance
3) reboot ur phone and see.
4) u should also ensure that ur on the same CWM recovery (the one used to make the bkp) while restoring the bkp, to avoid conflicts
Click to expand...
Click to collapse
will try this and give feedback
i think i did it before but i still get the error android.process.acore force closing
any way i will do it again to make sure
sparxx4 said:
will try this and give feedback
i think i did it before but i still get the error android.process.acore force closing
any way i will do it again to make sure
Click to expand...
Click to collapse
u can also try re-flash the kernel (which was used to make the nand bkp) once and see
im afraid that when i did the backup the rom wasnt bootup !! im not sure
i will wait couple of hours until i get the phone back from my sister will keep you on contacts thank you for your help