i installed the ICS update that come out on the 5th and it installed grand got my tablet rooted fine and seen that the burst was using the old clock work recovery as GB. so i flashed the old one i used on my element with
Code:
dd if=/data/local/tmp/cwm-5.0.2.7-presto.img of=/dev/block/mmcblk0p18
its the right block i made sure before i flashed and every thing worked fine it rebooted grand, i then tried to boot recovery and all i get now is a blank screen, every time force power off then turn on its trying to reboot to recovery i cant find a way to make it boot to fastboot or just normal boot, can do anything with fastboot or adb.
i need any help.
:EDIT:
fixed it some random combination of buttons i dont know what it was flashed up the software update screen for a second then it reboot fine.
Related
First off id like to say thanks in advance to any replies and also apologize if this has been posted previously (i searched and could not find anything that was helpful) I lurked around these forums when i had my x1 and im hoping you guys can be as helpful for me as you are for everyone else. anyway onto the issue
I used the superboot method to root my ATT US Streak. My intentions were to update to 2.1 following the steps in the "eclair working on my u.s. unlocked streak!" thread (wont let me put a link since its my first post)
after using fastboot to root the phone will boot up and function fine but recovery and fastboot no longer work. i tried flashing Koush's custom recovery and other things that require fastboot and the terminal just says "sending..." nothing happens no errors or anything, the cmd prompt just sits there and i need to remove the battery to reboot the device.
i then downloaded the Rom Manager apk from the market and flashed the clockwork recovery from there (it said i did anyway). when i load the recovery from boot (volume keys + power and its the stock recovery) and chose option 2 to flash modaco custom rom or even the stock dell rom it just goes to a black screen and i once again need to remove the battery to reboot.
the phone itself is still functioning fine when it boots up and everything works the way it should other than the home, menu, and back button lights flash in random orders, thats just annoying though. again any help is appreciated
so what should i try next?
EDIT: woke up this morning and now the device will not turn on. i tried starting to fastboot and recovery but still nothing. plug it into my pc and i get the "found new hardware wizard" for a Qualcomm CDMA Technologies MSM.
first real brick? ha that would be my luck
EDIT 2: a kid just ran through my work, grabbed my phone and threw it on the ground. it screwed up the 30 pin connector on the phone and the charger. im going to hurt somebody. phone is booting again though... put sd card back in and still boots fine
SOLVED: Dont know the technical reasons behind it but i had to reinstall the drivers and switch usb ports for every fastboot and recovery procedure
removed SD card and its booting up normally. any thoughts?
First time poster, did a lot of searching before posting but still can't find an answer.
I've got an Atrix 4g rooted and unlocked bootloader ( installed Notattrix 1.3.1 for awhile and it worked fine, but wanted to move on)
My volume keys recently stopped working so i can't move around nor get into CWM without using CWM touch and booting into the Recovery from the software on the phone. Once into recovery since i had the CWM touch I could get into and install the new CM 10. It installed fine and then when i reboot it I get the Splash screen loop.
I tried booting into the CWM with the adb commands but it shows my device's SN but its showing up as offline.
I had enabled the USB debugging before installing the new ROM.
I was on 2.3.6 and 4.5.141
Am I screwed? Thanks
So a friend recently bought this spanish voxter tab 97 IPS (16GB) and after a few days of usage and several attempt to install a custom ROM, the tablet stopped booting. According to him, he tried loading a "compatibility bla bla bla.zip" file with CMW which I really do not know what it is, and since he did the installation, the tab stopped booting into system. Every time it's turned on, it just stops at the boot screen and nothing more. Although before this, he had installed a custom recovery and had also done a Nandroid backup with the recovery. However, what baffles me is, CMW is no longer accessible through the normal "power + volume up" key combo and I'm quite unsure of how to boot into fastboot.
That aside, I tried booting into recovery with adb because apparently, adb recognizes the device whenever it's stuck at boot screen, this also failed, neither did rebooting into fastboot via adb work. All I need to know is if this device is totally bricked, or if there's still something I can do. If there's any, I really would appreciate every help offered. Thanks..
2 days ago my phone went from running perfectly to turning off and getting stuck in a boot loop, I'm assuming it had something to do with supersu updating because i noticed a popup about the binaries needing updating before the crash. I couldn't load recovery (would show team win logo then reboot) but i could load safe mode, i tried downgrading to lower versions of su ( i tried 2.13, 1.8 and 2.01) but that didn't work my phone would boot normally, i could access it for about a minute then it would reboot and do it all over again. i had originally followed this guide (URL at the bottom as i can't post links) so last night i attempted to just re do it all following the same guide. I got the recovery mode to boot and wiped the cache but i still had the same issue where i could access my phone for a minute before crashing. Now when i try to enter recovery it shows the htc logo and immediately reopens boot loader on the fast boot option. I rurally don't want to go out and buy a new phone so any help is appreciated. My current PC access is fairly limited but i can use one if i have to.
Also when i launched safe mode i noticed id get an error report after a few minutes, not sure if thats relevant but it never showed up when i booted normally.
android forums(.)com/desire-601-all-things-root/817068-root-unlock-bootlader-install-recovery-guide-htc-desire-601-zara.html
(remove the brackets)
*edit* i have tried searching for similar threads but i think i will have a better result if the replies are directed towards me directly
Thats weird. Ive never seen this issue before
Try this steps : http://forum.xda-developers.com/and...1-zaraul-s-t2893035/post56365857#post56365857
It works for me.
Hello, I'm new here. I have rooted my new fire 7in 5th gen tablet. I used the flashfire beta app to flash a rom which I found out that the rom had bugs, so I decided to install cm12.1 using the same app, but the app glitch when it started installing the rom meaning it didn't finish and kept installing. I decided to power it down and reboot it back up. It showed the cyanogemod logo booting with animation but nothing booted up. It kept booting like a bootloop. I restarted it multiple times and the same errors keep happening. I tried go into recovery mode by holding the volume up + power button at the same time when i was boot it up. it only went to amazon logo and not recovery. I also plugged in the device to the computer using my factory cable to see if I'm able to enter fastboot mode. It worked, but it wouldn't allow me to flash anything. The tablet greeted me a message saying flash not allow, but the commands were able communicate with fast-boot and cant get it into adb because the boot loop. I had actually enter fastboot mode using commands which worked. Sometimes when i type a different command it said failed remote. Some commands actually worked but I don't what other commands to use to fix it. It has been 10 months since this happened to me. I'm not willing to give up on it because their has to be alternative ways of bypassing these issues. Is their any way you guys can tell me how to fix this? Thank you.