Help please? I cannot connect - Asus Eee Pad Transformer Prime

Yesterday I could connect as usual. Today I cannot. My Prime sees the router and shows Good or Excellent but, as soon as I press Connect the icon goes to poor and constantly tries connecting. I've rebooted the router many times and have done a Factory reset with no luck. I cannot figure what the heck happened. Any help sure appreciated.
Sent from my ADR6400L using xda app-developers app

That sucks
- unlocked?
- jb update?
- root?
- tried another router?

Had pretty much the exact same issue 2 hours ago. All I did was reboot the prime.

Sure does suck.
- unlocked? .....No. I never could get the Asus unlocker to work. I do have a serial.
- jb update?.....No haven't attempted that.
- root?.....Yes but, no CWM
- tried another router?.....I haven't. My wife's tablet, laptop and both our phones connect.
Mine jus cycles saying Obtaining IP, Authentication problem.
Weird that it says Good or Excellent signal strentgh until I try to connect. Then, it instantly goes to Poor.
Geez...
Thanks to both of you for replying.

Sure does suck.
- unlocked? .....No. I never could get the Asus unlocker to work. I do have a serial.
- jb update?.....No haven't attempted that.
- root?.....Yes but, no CWM
- tried another router?.....I haven't. My wife's tablet, laptop and both our phones connect.
Mine jus cycles saying Obtaining IP, Authentication problem.
Weird that it says Good or Excellent signal strentgh until I try to connect. Then, it instantly goes to Poor.
Geez...
Thanks to both of you for replying.

I would go ahead with the jb update... would allow a change in software with a gleaming chance of keeping root.

Yeah, that makes sense. Seems I'd have nothing to lose. Is there "1" method that folks are
using? I'll search for the instructions.
Thank you again

thenrz said:
I would go ahead with the jb update... would allow a change in software with a gleaming chance of keeping root.
Click to expand...
Click to collapse
You could try deleting the saved connection and re-creating it. Has there been a recent firmware update on the router?

"You could try deleting the saved connection and re-creating it. Has there been a recent firmware update on the router?"
You know, I've long pressed on the connect and select "Forget" but the router still shows, and
of course says "Excellent" signal. If I press again it wants my password. Been doing this cycle
over and over. Not sure if there has been an update over the past few days as it is a router/modem
from Brighthouse. Still, my phone, my wife's TF101, and phone connect.

JohnDaddyo said:
"You could try deleting the saved connection and re-creating it. Has there been a recent firmware update on the router?"
You know, I've long pressed on the connect and select "Forget" but the router still shows, and
of course says "Excellent" signal. If I press again it wants my password. Been doing this cycle
over and over. Not sure if there has been an update over the past few days as it is a router/modem
from Brighthouse. Still, my phone, my wife's TF101, and phone connect.
Click to expand...
Click to collapse
Well, this hasn't happened with my Prime, but I have seen it happen with another device - specifically one of my two Roku boxes. After a firmware update to my router, one of the two Roku's every once in a while will act just like your prime is even though every other wireless device (even the other Roku) does work. And, the one with the problems is much closer to the router than the one that works fine. Both Roku's have the same firmware even. Sometimes wireless just seems like its far from being an exact science.
I have found with my prime that it seems to help if I set it to either "g only" or "N Only" and not mixed mode. But that just seems to give me better reception - doesn't make any difference to establishing a connection in the first place.

Just getting little sicker each day. Definately not built for this. I went through every page and tab of my BHN Moto Surfboard router and could not see any where to select or change b, g, or n. I've even messaged (twice) this Josh person who has great youtube videos on how he was able to put the official Jellybean rom on his Prime. I was hoping for a fee, he would do mine but sadly, no response.
Sometimes I wonder if the heart ache is worth it all. MANY thanks to those that have tried to help.
John

Hey John,
If you didn't unlock your Prime this should work.
Download the right(US, WW, etc.) JB firmware(v.10.4.2.15) from the Asus site.
Copy it to a micro-SD card. Place it in your Prime and with the standard FileManager copy it to the root of your internal SD.
Reboot your Prime. You must see a yellow triangle in the lower right corner. That is the message to update to JB.
Hope it works.

sammytheman said:
Hey John,
If you didn't unlock your Prime this should work.
Download the right(US, WW, etc.) JB firmware(v.10.4.2.15) from the Asus site.
Copy it to a micro-SD card. Place it in your Prime and with the standard FileManager copy it to the root of your internal SD.
Reboot your Prime. You must see a yellow triangle in the lower right corner. That is the message to update to JB.
Hope it works.
Click to expand...
Click to collapse
Don't you have to unzip the initial download which yields yet another zip file and put that on your memory stick?

I will try this in the morning but, at the risk of sounding "corny" I am so grateful
for all the replies. Truly thankful
John
oops...
does the fact that I cannot get a connection on my Prime (yet?) matter?

State of the Prime
I downloaded and followed your instructions, placing the zip within the zip on my micro
and then using File Mgr, moved the zipped US_epad_user_10_4_2_15_UpdateLauncher file
to the root of my internal storage and rebooted. I did not get a yellow triangle but a blue one
in the notification area which said there is an update/. I clicked it and got the Green Droid with a
progress bar. When all that finished I ended up at an ASUS screen with the "powered by Nvidia Tegra in
the bottom right. It has been at least twenty minutes and has stayed on this screen.
I'm going to reboot again and if nothing changes, reboot holding power and vol down, followed by vol up.
a trembling,
John
update
Still stuck on the black screen. Cannot turn the device off. Full battery but maybe by tomorrow it will shut off.

JohnDaddyo said:
State of the Prime
I downloaded and followed your instructions, placing the zip within the zip on my micro
and then using File Mgr, moved the zipped US_epad_user_10_4_2_15_UpdateLauncher file
to the root of my internal storage and rebooted. I did not get a yellow triangle but a blue one
in the notification area which said there is an update/. I clicked it and got the Green Droid with a
progress bar. When all that finished I ended up at an ASUS screen with the "powered by Nvidia Tegra in
the bottom right. It has been at least twenty minutes and has stayed on this screen.
I'm going to reboot again and if nothing changes, reboot holding power and vol down, followed by vol up.
a trembling,
John
update
Still stuck on the black screen. Cannot turn the device off. Full battery but maybe by tomorrow it will shut off.
Click to expand...
Click to collapse
Maybe you can use this guide:
http://forum.xda-developers.com/showthread.php?t=1909820

My problem is that I'm stuck on a pretty much black screen. I cannot even turn off the Prime.
The only way is to drain the battery. When I hold vol down and power, it clears and vibrates
but, comes right back to that same Asus screen. It's on right now.
lame update:
I was able to turn it off by holding vol up and power.
Sucks that just being able to turn it off is a good thing.

Your not unlocked I would send it in for warranty

I'd have to wonder at this point, if I'm void. I've had it since it came out. Plus, it
seems I bricked it. Trying flash the jb rom. As I say, it will not boot.

as if...LOL
the only way I can power off is, to hold vol up after I feel it buzz/vibrate
Wondering if removing the jb zip off of the internal root would do anything?
edit:
dumb ass me obviously because I cannot boot, I can't even get to the internal root.
does anyone think a rectangular device would fly, like a Frisbee?

Related

Mediapad/Springboard won't read update.zip

All,
I've been following posts on XDA since my original droid incredible days. I've rooted and maintained two phones, never have any issues.
Recently I purchased a T-Mobile Springboard (got a crazy promotion price through my company) which ran stock TMo Honeycomb. Eager to get ICS and eager to get rid of the power-on tmobile jingle, I installed the latest S7-302u firmware update from Huawei's website. I am aware that my device is technically S7-303u, but the update worked fine and I had little-to-no bugs. I am very pleased with this tablet.
Now here where I get stupid.
A coworker of mine then tells me that he has a S7-303u update.zip file that he can give me, which I don't object to. I give him my micro SD, he places the file in the 'dload' folder with 'unlmt.cfg'. I then reconsider my predicament, and decide that I'm happy with my current firmware, even if it's not made specifically for my tablet hardware version. If it ain't broke, don't fix it.
By the evening, I forget that the update file is on my SD card.
Before going to bed, I extinguish the battery and let it power down. I then plug it in the the wall and fall asleep.
Around 3 am (3 hours later) I was woken up to my springboard rebooting. Confused, I pick it up and see that it's in some kind of boot-loop. The screen turns on, but stays black, and then immediately powers down, and restarts. This process repeats indefinitely. I hold the power button down, trying to do a hard-reboot, but it doesn't seem t work. Then, after about 5 "holding the power button down for 10 seconds", the device reboots and I am graced with the gracious Huawei MediaPad logo.
The device automatically goes into recovery mode and installs the forgotten update.zip....
Now I'm pissed, specifically because I've lost my high scores in Trainyard Express and just because I now how to re-install all my apps. It's annoying, but it's not the end of the world. Or so I thought.
I use my tablet 75% of the time for reading through the kindle app, and on this version of ICS the kindle app doesn't work! So immediately I decide to revert back to the old S7-302u update that I originally had installed, following the same steps I did to manually update the device previously.
I now cannot, for the life of me, get this thing to boot into recovery mode. The only thing I can get this device to do is get to the "Enter into fastboot mode" screen by holding the power button and the volume+ key (the one closest to the power button).
A few other symptoms:
1. The device is set to quickstart mode by default and I don't see any option to deactivate it. The only way to get the device to actually "turn off" is to choose restart to hold the power button down for a hard reboot.
2. If I hold down the power button for ten seconds, I expect the device to power down and stay down. This is not the case. It always reboots immediately. I have no way of actually fully powering this device down (not counting the quick-start power-down).
3. No charging indication. I'm not sure if this is a hardware or software issue. My device will charge, but it does not give any indication on the screen or the battery icon.
Now I'm stuck wondering what to do. Did I ruin this device? I wanted to avoid rooting it because of the loss of 4G data, but now I'm afraid that I might need root-permissions to fix whatever I messed up.
Thanks in advance for your help.
Daniel
PS. Just so you all know my experience, I've rooted and maintained a droid incredible and currently, my galaxy nexus. I however, have no programming experience what-so-ever. I'm just good at following directions (usually).
What happens if you pull the micro sd card out? It should stop the boot loop (in theory). If the install didn't go through it should boot up normally to the previous version. In settings you can turn off FastBoot.
You might have to look at the sd card on a computer and either get rid of the unlmt.cfg from the dload folder and it shouldn't try to boot to the dload folder.
eurobass said:
All,
I've been following posts on XDA since my original droid incredible days. I've rooted and maintained two phones, never have any issues.
Recently I purchased a T-Mobile Springboard (got a crazy promotion price through my company) which ran stock TMo Honeycomb. Eager to get ICS and eager to get rid of the power-on tmobile jingle, I installed the latest S7-302u firmware update from Huawei's website. I am aware that my device is technically S7-303u, but the update worked fine and I had little-to-no bugs. I am very pleased with this tablet.
Now here where I get stupid.
A coworker of mine then tells me that he has a S7-303u update.zip file that he can give me, which I don't object to. I give him my micro SD, he places the file in the 'dload' folder with 'unlmt.cfg'. I then reconsider my predicament, and decide that I'm happy with my current firmware, even if it's not made specifically for my tablet hardware version. If it ain't broke, don't fix it.
By the evening, I forget that the update file is on my SD card.
Before going to bed, I extinguish the battery and let it power down. I then plug it in the the wall and fall asleep.
Around 3 am (3 hours later) I was woken up to my springboard rebooting. Confused, I pick it up and see that it's in some kind of boot-loop. The screen turns on, but stays black, and then immediately powers down, and restarts. This process repeats indefinitely. I hold the power button down, trying to do a hard-reboot, but it doesn't seem t work. Then, after about 5 "holding the power button down for 10 seconds", the device reboots and I am graced with the gracious Huawei MediaPad logo.
The device automatically goes into recovery mode and installs the forgotten update.zip....
Now I'm pissed, specifically because I've lost my high scores in Trainyard Express and just because I now how to re-install all my apps. It's annoying, but it's not the end of the world. Or so I thought.
I use my tablet 75% of the time for reading through the kindle app, and on this version of ICS the kindle app doesn't work! So immediately I decide to revert back to the old S7-302u update that I originally had installed, following the same steps I did to manually update the device previously.
I now cannot, for the life of me, get this thing to boot into recovery mode. The only thing I can get this device to do is get to the "Enter into fastboot mode" screen by holding the power button and the volume+ key (the one closest to the power button).
A few other symptoms:
1. The device is set to quickstart mode by default and I don't see any option to deactivate it. The only way to get the device to actually "turn off" is to choose restart to hold the power button down for a hard reboot.
2. If I hold down the power button for ten seconds, I expect the device to power down and stay down. This is not the case. It always reboots immediately. I have no way of actually fully powering this device down (not counting the quick-start power-down).
3. No charging indication. I'm not sure if this is a hardware or software issue. My device will charge, but it does not give any indication on the screen or the battery icon.
Now I'm stuck wondering what to do. Did I ruin this device? I wanted to avoid rooting it because of the loss of 4G data, but now I'm afraid that I might need root-permissions to fix whatever I messed up.
Thanks in advance for your help.
Daniel
PS. Just so you all know my experience, I've rooted and maintained a droid incredible and currently, my galaxy nexus. I however, have no programming experience what-so-ever. I'm just good at following directions (usually).
Click to expand...
Click to collapse
Thanks
What is the firmware version of S7-302u are you installed in your S7-303u?
Hey, I have the springboard and did the exact thing you did, somehow the stock recovery was all messed up, best bet is to install twrp using fastbood and cm10. just follow after_silences instructions here,
http://forum.xda-developers.com/showthread.php?t=2045808
[Edit]once you change tmo stock firmware you'll lose your 4g option(there my be a fix for this now)but you will be able to text and make calls over 2g, edge2 and 3g"no need for WiFi or side app"[Edit]

Stock Prime messed up pretty seriously HELP!

Hi everyone!
This is my first post unfortunately, I'll try to keep things short and clear. I'm in pretty deep $#&@.
My Prime:
-4.1.1
-WW sku
-firmware 10.4.2.18
I was happy with it for two years I have never touched it other than updating it from HC all the way to JB. Two years later out of nowhere the screen gets garbled the tablet started to give screaming sounds through the speaker at max volume and then it went dark. I couldn't switch it on only after a whole night on the charger although it had enough juice on it. Since then every time I boot it it tries to install an OTA camera firmware update, but it fails each time, it gives the exclamation mark once in android, same result.
Issues after the incident:
- SD card slot not working,
- USB port not working,
- whenever the tablet has to make sound through speakers the screaming goes on until I shut it down or it goes dark by itself,
- the tablet recognises false power and volume button presses only in android in the recovery they work fine,
- sound through any type of external speaker, headphone earphone works, but occasionnally there is noise in the background
- the camera firmware is completely missing, upon opening the app it says it can't work without the firmware and asks me kindly to update it (in the about tablet the firmware version is X-ed out)
- if I close the tablet with the dock, it can't be unlocked again, it must be rebooted in oder to use it
- te tablet doesn't get recognised by my and any other PCs although it charges fine (that was an old issue i bought another cable with the same result)
- varoius little bugs, wifi switching on and off, gps weakness, notification bar not opening
What works:
- microSD card slot (i have a fat32 formatted microSD with 4GBs of storage)
- keyboard with all keys
- touchscreen
- all apps & games
How I tried to solve the problem:
I factory reset it about 4 times since without success obviously. The device is no longer under warranty so I unlocked its bootloader with the ASUS tool. It worked fine. I can't achieve root however because of the connectivity issue, Framaroot says my device isn't vulnerable. I tried to update the firmware through my microSD card, but the exclamation mark doesn't appear even after a reboot or hard reset (maybe because I had the latest already installed). There is no RMA in my country, and the fee of the service and the transport all the way to and back from the Czech Republic is way too high for me to pay.
So here I am with a more or less functional Prime robbed of nearly all the features, helpless and not knowing what to do next.
Any help would be greatly appreciated, although I really do think that it is beyond saving.
Cheers,
Peter from Hungary
Try to install a new rom. It seems like a software problem.
Sent from my Transformer Prime rime using xda premium
Tudor1999 said:
Try to install a new rom. It seems like a software problem.
Sent from my Transformer Prime rime using xda premium
Click to expand...
Click to collapse
Hi!
Thanks for the advice, I would gladly try but given the state of my tablet I am unable to do so.
Any suggestions on how do I install it step by step?
Buricsavo said:
Hi!
Thanks for the advice, I would gladly try but given the state of my tablet I am unable to do so.
Any suggestions on how do I install it step by step?
Click to expand...
Click to collapse
It does sound like hardware failure to me but when it is powered off and you hold down Volume Down and the Power button the same time fir a few seconds do you get into a screen with icons on it ?
flumpster said:
It does sound like hardware failure to me but when it is powered off and you hold down Volume Down and the Power button the same time fir a few seconds do you get into a screen with icons on it ?
Click to expand...
Click to collapse
Yes, the stock recovery works perfectly if that's what you ask!
IS there a slight chance of making it work again?

[Q&A] [ROM]【4.4.4】Google Play Edition 【KTU84P】- 09/30/2014

[Q&A] [ROM]【4.4.4】Google Play Edition 【KTU84P】- 09/30/2014
Q&A for [ROM]【4.4.4】Google Play Edition 【KTU84P】- 09/30/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
gpz1100 said:
I gave up trying to calibrate my compass. I have issues with it in any rom including stock TW. Some of these chips are just broken.
Click to expand...
Click to collapse
After trying many of the suggestions on this thread to fix the compass (my GPS lock is fine), I thought I might have messed up the hardware somehow. However, last night I flashed the 7/12 KT GE kernel, and the compass now correctly points in the right direction.
Germany?
Hi Dan (or whoever else reads this). Love the ROM! It's amazing. Do you know if it will work in Germany? I went to Mexico a few months ago, and the latest build at the time would not get reception anywhere. Flashing a TW ROM solved the problem, but I would much rather use yours.
Thanks!
TheSt33v said:
Hi Dan (or whoever else reads this). Love the ROM! It's amazing. Do you know if it will work in Germany? I went to Mexico a few months ago, and the latest build at the time would not get reception anywhere. Flashing a TW ROM solved the problem, but I would much rather use yours.
Thanks!
Click to expand...
Click to collapse
Well in case anyone is curious, this ROM gives me great cell service (full signal on Vodaphone.de) but no data in Munich. I tried airplane mode, disabling/enabling data roaming several times and setting the network mode to GSM preferred, but no luck. Flashing the latest release of Hyperdrive ROM allowed me to use data. Oh well.
flashing google edition on verizon s4 on nc5
I'm a noob and can't figure out if i can use safestrap to flash the dandvh google play edition rom.
verizon galaxy s4 on nc5 build, rooted with towel root and running safestrap 3.75
Viper Audio Working?
Does anyone else use Viper Audio with this rom? I find that the audio driver frequently stops processing when I stop playing music and then come back and play again. It will start processing again if I reboot the phone or even kill the Viper gui process. I've tried installing it as a user or system app but hasn't seemed to matter. Anyway, just curious if anyone else was having the same kind of results.
Hi everyone, hoping you all can help me with a problem I'm having with my phone. First, some specs:
ROM: Danvdh GPE 9/30
I am one of those lucky MDK users, I got the phone in May 2013 and rooted early
I had been running the NC5 modem for a while now with no issue. The problem started after I flashed the NG6 modem (from Surge1223's thread) in TWRP. Just fyi, here are the steps I took to flash the modem. Within TWRP, I flashed the zip file, cleared Dalvik/cache, then rebooted.
Almost immediately I started getting random reboots. It rebooted twice, then seemed to settle down, so I decided to wait a day or so to see what my phone would do. Sadly enough, it started rebooting again, so I gave up last night and reflashed the NC5 modem in TWRP using the same method as before. The phone was fine after that, until this afternoon. About an hour ago, my phone froze, and rebooted, but the screen cut off at the Samsung custom padlock boot screen. It seems to be off at this point, but I can't power on the phone without pulling the battery. After pulling and replacing the battery, the phone powers on by itself, but again cuts off at the Samsung boot screen, about 3-4 seconds into the boot process. I've tried booting into TWRP and download mode, with the screen turning off and the device seemingly freezing after 3-4 seconds. I'm at a loss as to what to do at this point.
I'm at work right now, but when I get home, I will see if Odin3 can make some sort of contact with the phone. Any help in the meantime would be greatly appreciated!
Sounds like you may have a bad dl. Re download. Turn phone off. Then boot into TWRP and reflash the modem zip. Not the non-halos.zip.
Alxoom33 said:
Sounds like you may have a bad dl. Re download. Turn phone off. Then boot into TWRP and reflash the modem zip. Not the non-halos.zip.
Click to expand...
Click to collapse
I would love to, but I can't.
I put a video up on Youtube showing what the phone is doing right now. I don't have 10 posts yet, so I can't post links, but if you go to youtube.com then add "/watch?v=3ey5xD9LodY" at the end of the URL, you can see what the phone is doing.
It is the only thing the phone will do. I've tried doing a hard reset by holding the power button, but nothing happens. All I can do is pull the battery and start this process again. If I hold the correct button combos, I can begin to boot into TWRP or download mode, but the phone cuts off/freezes like clockwork after 3 seconds.
I tried to get Odin3 to recognize the phone, but my desktop doesn't recognize that anything is plugged in when I connect my phone to it, so Odin3 by extension doesn't see anything.
Did you install the Samsung apps on your computer? You need them for the computer to recognize your phone.
To hard boot into recovery you need to hold power button and volume up at the same time, then let go of power button once blue writing appears on upper corner of phone.
Sent from my Xoom Wifi using Tapatalk
I'm sure I have. I've been able to send adb commands to the phone in the past. Now however, my PC doesn't even see that a device has been connected to it (nothing shows up in the device manager, not even an unrecognized device).
The phone will no longer charge when I plug it into an AC adapter either (or at least the LED no longer lights up indicating it's charging).
I have tried booting into recovery several times. Each time, it will begin to boot into TWRP, the blue text, "RECOVERY BOOTING...", will display, then immediately afterwards, the screen will cut off and the phone will freeze, just like in the Youtube video I posted.
I'm afraid the thing is bricked...
So, I was talking to a friend about what's been going on with my phone. During the conversation, I started goofing around and smacking the back of the phone like 4-year-old me would an NES to try and make it work (ah, good times...). Believe it or not (and I did not touch the power button while doing this), the phone powered up and successfully booted!!!
It showed only 2% battery life, so I connected it to the AC adapter, but then a few seconds later the phone died again.
This occurrence leads me to believe there is something wrong with the battery, and leads me to another question. Can the S4 (or any other smartphone) run solely on USB power?
My roommate has a Galaxy SIII, I read the SIII battery can be used in the S4, so I will test the phone out with his battery when he gets back tomorrow, and update you then.
marioluigi64 said:
So, I was talking to a friend about what's been going on with my phone. During the conversation, I started goofing around and smacking the back of the phone like 4-year-old me would an NES to try and make it work (ah, good times...). Believe it or not (and I did not touch the power button while doing this), the phone powered up and successfully booted!!!
It showed only 2% battery life, so I connected it to the AC adapter, but then a few seconds later the phone died again.
This occurrence leads me to believe there is something wrong with the battery, and leads me to another question. Can the S4 (or any other smartphone) run solely on USB power?
My roommate has a Galaxy SIII, I read the SIII battery can be used in the S4, so I will test the phone out with his battery when he gets back tomorrow, and update you then.
Click to expand...
Click to collapse
Have you tried a different USB cable/transformer? It sounds like you might just have a charging issue. Not enough juice to get it started.
Allowing a battery to cool down will give it more usable power, which as it heats back up will deplete again. This sounds like your situation... Power off for a few, restart it has enough to begin booting, then depleted again.
The phone cannot run on USB alone it needs the battery to sustain it's operation.
I have tried 3 USB cables, 2 AC adapters, and 2 PCs.
When this started on Friday, my phone was hooked up to my PC at work and showing about 50% battery, but it's possible something went wrong with the battery and it's stopped delivering any significant amount of power or accepting a charge.
So it turns out it wasn't the rom or new modem that was the problem, my battery has decided to kick the bucket. I tried my roommate's battery in my phone and it booted right up as if nothing was ever wrong! Strange that an OEM battery would just die like that, but I suppose that does happen from time to time. Thanks for the help!
matycakes said:
Does anyone else use Viper Audio with this rom? I find that the audio driver frequently stops processing when I stop playing music and then come back and play again. It will start processing again if I reboot the phone or even kill the Viper gui process. I've tried installing it as a user or system app but hasn't seemed to matter. Anyway, just curious if anyone else was having the same kind of results.
Click to expand...
Click to collapse
I use it, and I've never had any issues with it. I would recommend reinstalling, but you've probably tried that already. Are you using the latest version of the app?
TheSt33v said:
I use it, and I've never had any issues with it. I would recommend reinstalling, but you've probably tried that already. Are you using the latest version of the app?
Click to expand...
Click to collapse
Yeah, I have tried reinstalling it, and I am using the latest version of the app. The fact that you haven't had any issues is encouraging. I'll continue to troubleshoot and see what I can find.
I keep getting this (in CWM touch)
Flashing Google Play Edition
Android 4.4.4
Enjoy!
format() expects 5 args, got 4
E: Error in /storage/sdcard1/danvdh-GE-4.4.4-09-30-2014-VZW.zip
(status 7)
installation aborted
Is it just a bad DL?
EDIT: Tried a new DL, same issue. I want to get this fixed asap
Is cm11 theme manager included in this rom?
brd912 said:
Is cm11 theme manager included in this rom?
Click to expand...
Click to collapse
It is not.

Weird situation, phone mysteriously not starting, any insights?

Hi there! Long time reader, first time poster (TL;DR below...but it should be a quick read anyways )
So I've been using this S2 of mine for almost 4 years now, haven't had any trouble (other than a couple of battery swaps). For the past 6 months or so I've been using CM 12.1 nightlies without issue.
The events:
- The other day, my phone froze (I wasn't using it when it froze, it was when I went to use it that I noticed...it was on the wifi selection screen if it matters), so I held the power button to shut it down, and when I powered it back up, it just froze at the Samsung boot screen (with the usual yellow triangle).
- At this point, I was able to reboot into download mode at will, but any attempt to boot to recovery just led to the freeze at the Samsung boot screen. Also, the phone would automatically reboot itself at this point any time I inserted the battery (I was of course putting the battery in and out trying everything I could).
- I would have reflashed from Odin at this point, but since I was away for a few days I just kept trying to reboot into recovery, to no avail. On one of these attempts (power+vol up+ home) it showed the Samsung boot screen, and then immediately shut down and I haven't been able to get anything onto the screen since
I'm now home, and I can't seem to fix it. If I plug the phone into a charger, the top half or so of the phone gets warm, and it also seems to get warm if it isn't plugged in and I try to power it up. I was thinking maybe the phone was maybe doing the same thing as before and just not showing anything on screen, but I blindly do the steps to get it into download mode, and Odin doesn't recognize anything (drivers are definitely installed). I have also tried other batteries, no luck.
Any ideas of what I might try? I'm willing to do anything. For the record nothing happened to the phone at all when this all happened (no dropping or water damage or anything, just my attempts at booting into recovery). Maybe I should try a jig? I'm also open to opening the phone if there's something I can do, though I don't have experience with this.
Thanks so much for any suggestions!
TL;DR: phone froze (running CM 12.1 nightly), held power to shut it down, and then consistently froze at the boot screen on any attempts to power it on. After a few attempts at booting into recovery (the phone would only freeze or enter download mode) the screen suddenly shut off and I haven't seen anything on it since no matter what I try. I can't think of anything that happened to the phone I'm open to any and all suggestions! Thanks
One sentence amongst your description stands out like a 'sore thumb'.....
That the device heats up towards the top when you attempt to charge it.......
Until you try a jig I can't be certain, but that heating coupled with a dead/unresponsive screen along with a lack of recovery and/or download modes (download mode is 'hardwired' into the device, and NOTHING should be able to corrupt it) are the primary symptoms of a failed motherboard.......
That is my opinion based on my experience in these forums and personal experience with a (now dead) S2 (one of two that I own).........
Get the jig just to be sure, but I'd be surprised if it had any effect.....sorry to be typing something you don't want to read, but you said it yourself, the device is 4 years old....it's been in service roughly twice as long as most smartphones, and they don't last forever....
http://i.imgur.com/rVnFwJM.jpg
Thanks dude! It's nice to have some idea of what happened. I am indeed very happy my phone has lasted me this long, and my friend is gonna give me an extra S2 she has anyways it seems so it's all good!
I'll try the jig and update here with the result (I ordered one online...will arrive in January sometime)...just in case anyone is curious.
smacsmac said:
Thanks dude! It's nice to have some idea of what happened. I am indeed very happy my phone has lasted me this long, and my friend is gonna give me an extra S2 she has anyways it seems so it's all good!
I'll try the jig and update here with the result (I ordered one online...will arrive in January sometime)...just in case anyone is curious.
Click to expand...
Click to collapse
Yeah....be good to know the results.....If only to confirm or refute what I've suggested.....
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
Yeah....be good to know the results.....If only to confirm or refute what I've suggested.....
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
Sorry it took me a while...the jig was in the post haha. It didn't do anything at all (no response when I plugged it in) so I think it's safe to say you were bang-on and the motherboard failed! Happily using a new S2 (with CM13.0 now ) on behalf of my friend though.
Thanks again.
Sounds familiar. Happened to me also due to failed cyanogenmod update (CM13). Only thing that works is download mode, so i'm not given up hope yet.
I can't post a link but google ''Apply Update Failure samsung galaxy s II'' there's a thread about this on the cyanogenmod forum.
Elaias said:
Sounds familiar. Happened to me also due to failed cyanogenmod update (CM13). Only thing that works is download mode, so i'm not given up hope yet.
I can't post a link but google ''Apply Update Failure samsung galaxy s II'' there's a thread about this on the cyanogenmod forum.
Click to expand...
Click to collapse
oh mine was just straight up dead...no download mode or anything visible on the screen (and nothing to do with CM13 either)
hope you get yours sorted out! have you tried reflashing anything via Odin while in download mode?
Its hard to tell you and hard to accept. You can almost give up the hope, your NAND Chip is just what we call " wear-out ". In the most cases no write is possible anymore, the funny part is -> sometimes read is still fine. If that is the case: The system is booting and working, but saving just nothing. The NAND is frozen to its state before it broke.
At our local store, customers come to us with issues like " Factory Reset impossible ", "Can't delete my Files" "Can't create files". All these Devices have inaccessible NAND's and inaccessible Recovery. Only Bootloader is working, but as the NAND is broken, flashing doesn't change anything.
smacsmac said:
oh mine was just straight up dead...no download mode or anything visible on the screen (and nothing to do with CM13 either)
hope you get yours sorted out! have you tried reflashing anything via Odin while in download mode?
Click to expand...
Click to collapse
yeah, flashing with odin did the trick. now running cm13 and everything works fine. sorry to hear that your phone turned to brick.

Softbrick? Or am I out of luck?

Hi I'm pretty new to rooting and flashing and all that modifying my phone stuff. Firstly I'd like to thank @roirraW "edor" ehT and @LASERWOLF452 for the guides on rooting my phone which I've been trying to do for over a year, but just now finally succeeded.
Now I've run into a problem leaving my phone useless. Not sure if software or hardware problem. After I turn my phone on, which sometimes that doesn't work, it gets to LG logo then screen goes black, all buttons unresponsive including power button. I think I softbricked my phone because sometimes it gets stuck in the bootloop. (Edit: It doesn't go into the bootloop that often, mostly just blackscreens after LG logo or when I turn it on, it vibrates and that's all, logo doesn't even pop up.) Sometimes when I pull the battery out, wait a few minutes, then put it back in I can get it to turn on and get to the PB Screen after the LG logo (because I have the PitchBlack theme installed). Sometimes I can even get to my home screen even open an app, but then everything freezes and screen goes off. Usually after any of these attempts, doing anything with the power button results in nothing, not even a single vibration. It makes me think that the phone is on just the screen is unresponsive. So I have to pull the battery out and try again. I held volume down and power button til LG logo came on, then let go of power button and immediately held it again until I got into recovery. Scrolled down to factory reset, clicked yes, then most of the time the phone shuts off and the LG logo comes on and goes black again. One time it got TWRP to open up. But it froze and screen went black. I finally got it to go into TWRP again randomly, but trying to click on the "Advanced" key in the process of wiping the dalvik cache my phone half froze. By half froze I mean just that. The status bar showed my phone's changing temperature, the minutes were changing and the battery percent showed. When I went to slide the arrow to wipe the cache it wouldn't move. It was like the bottom part of my touchscreen wasn't working. Then I pressed the power button and it locked the screen and said slide to unlock but I couldn't slide the slider. So it's like half of my phone functioned and half didn't.
I wasn't having major issues like this except occasionally getting my phone to receive a charge or turn on. This booting issue started yesterday when I was at work. I was just playing pokemon GO and decided to charge my phone. I unplugged a charger for a Bose speaker (one of those color sound ones) and plugged it into my phone and it immediately shut off and wouldn't get past the LG logo. After a long night of failed attempts to get it working, this is where I am now.
I rooted my phone last week. After the first night I freaked out because I couldn't get my phone to turn on the next morning, I forgot to charge it and the battery was drained. It wouldn't even receive a charge. Then I googled some stuff and found out that taking the battery out and putting it back in can sometimes get it to receive a charge. Then I have to unplug it before turning it on or else it'll just reboot with the battery logo. I've had to do this every time when the battery is completely drained.
I rooted my phone by downgrading to 35B and doing all that LG FlashTool stuff then used Stump. Then installed TWRP and CM13. The most recent thing I have been messing with is Xposed Installer and downloaded and activated a few modules yesterday. Could those have done something? A few were out of date that I decided to give a try. After I turn my phone on and feel it vibrate and all that, I think it actually is turning on. Whether it makes it to the LG logo or not, it seems like it is turning on and maybe the screen just isn't functioning the way it's supposed to. I can't turn it on again, holding the power button does nothing.
Sorry that this was really long, tried to give a detailed description of my issue. Phone has been useless for 24 hours now. It really sucks because I need it, will be traveling through a few airports later today and need to call people to make sure I have rides. Only thing I can think to try is get a new battery. I would really appreciate any help that anyone can provide! I'm desperate.
Update: Recently I have been able to get the phone to start up like normal and get to the home screen, check my texts, that kind of stuff, but within 30 seconds it freezes and shuts off.
I'll confess, I didn't read everything, but a few questions and suggestions. FYI if it were me I'd skip right to suggestion #3.
Can you still access TWRP?
If so,
1. Try wiping Cache and Dalvik /ART or if that doesn't work wipe Cache, Dalvik /ART and Data.
2. If both don't help, wipe them again, then do a fresh flash of whatever preferably stock based ROM you want and the appropriate Bootstack.
3. I would flash the 10B TOT and start fresh. It's often enough the experience of users who flash non-stock or international stock-based ROMs to have various troubles.
No matter what caused the problem, TOTs contain more partitions that KDZs and flashing TOTs can fix problems that KDZs can't.
Good luck, keep us posted.
roirraW "edor" ehT said:
I'll confess, I didn't read everything, but a few questions and suggestions. FYI if it were me I'd skip right to suggestion #3.
Can you still access TWRP?
If so,
1. Try wiping Cache and Dalvik /ART or if that doesn't work wipe Cache, Dalvik /ART and Data.
2. If both don't help, wipe them again, then do a fresh flash of whatever preferably stock based ROM you want and the appropriate Bootstack.
3. I would flash the 10B TOT and start fresh. It's often enough the experience of users who flash non-stock or international stock-based ROMs to have various troubles.
No matter what caused the problem, TOTs contain more partitions that KDZs and flashing TOTs can fix problems that KDZs can't.
Good luck, keep us posted.
Click to expand...
Click to collapse
Sorry I know it was super lengthy. Sometimes I can access TWRP and sometimes I can't. I'm getting so aggravated with my phone! I think I successfully wiped Dalvik which did not help so I'll try to do the others if my phone wants to cooperate with me. Most of the time it doesn't even want to boot into recovery. Most of the time after clicking Yes under factory data reset the LG logo pops up then my phone just goes black.
Update: Wiped Davlik/Art, Cache, and Data. Rebooted and saw the CM13 logo instead of PB but then immediately shut down.
Yeah, I'd definitely go the 10B TOT route.
I've rooted a few phones, but I'm not a ninja like these other xda'ers are. I'm running Jasminerom 8.0 (which is excellent on the g3), a couple of weeks ago, I tried Dirty Unicorns, but it didn't seem to play well with my phone, so I went back to JR 8.0 (by restoring my nandroid backup) then tried to upgrade to JR 9.0 then 9.1. I didn't even get the LG start screen, the screen was black, but I could tell the phone was on by a couple of noises. I did hyelton's "[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP" http://forum.xda-developers.com/showthread.php?t=2785089 It puts the phone back to dead stock, you have to root again and reinstall twrp, then you can go to the rom you want. It scared me pretty good, but within a day or 2, I had my phone back to where it was. Don't forget to thank the devs who post these guides, they can get you out of almost any jam you get into.:good:
FesterBesterTester said:
I've rooted a few phones, but I'm not a ninja like these other xda'ers are. I'm running Jasminerom 8.0 (which is excellent on the g3), a couple of weeks ago, I tried Dirty Unicorns, but it didn't seem to play well with my phone, so I went back to JR 8.0 (by restoring my nandroid backup) then tried to upgrade to JR 9.0 then 9.1. I didn't even get the LG start screen, the screen was black, but I could tell the phone was on by a couple of noises. I did hyelton's "[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method With LGUP" http://forum.xda-developers.com/showthread.php?t=2785089 It puts the phone back to dead stock, you have to root again and reinstall twrp, then you can go to the rom you want. It scared me pretty good, but within a day or 2, I had my phone back to where it was. Don't forget to thank the devs who post these guides, they can get you out of almost any jam you get into.:good:
Click to expand...
Click to collapse
I was literally in the middle of following the instuctions in the guide you linked, then when I have FlashTool all ready, I noticed my phone turned off. I read that I might have to put it back in download mode after messing with device manager. Now the problem is I can't get it to download mode. I can get the download mode and blue dots image, but doesn't go to the next screen with the "firmware update don't unplug phone" it just goes to blackscreen help I was literally just in download mode now my computer says it doesn't recognize the last usb device that I plugged in
ArcticPat said:
I was literally in the middle of following the instuctions in the guide you linked, then when I have FlashTool all ready, I noticed my phone turned off. I read that I might have to put it back in download mode after messing with device manager. Now the problem is I can't get it to download mode. I can get the download mode and blue dots image, but doesn't go to the next screen with the "firmware update don't unplug phone" it just goes to blackscreen help I was literally just in download mode now my computer says it doesn't recognize the last usb device that I plugged in
Click to expand...
Click to collapse
Do a battery pull to make sure it is shut off, then do the Vol up while plugging in the usb cable. Even if the screen stays black, it should still go into download mode (that's exactly what had happened to me). When you go into Device Manager, you should see LGE Modem listed under Ports, and keep following hyelton's instructions. I was sure mine was dead, but it worked fine.
FesterBesterTester said:
Do a battery pull to make sure it is shut off, then do the Vol up while plugging in the usb cable. Even if the screen stays black, it should still go into download mode (that's exactly what had happened to me). When you go into Device Manager, you should see LGE Modem listed under Ports, and keep following hyelton's instructions. I was sure mine was dead, but it worked fine.
Click to expand...
Click to collapse
I managed to get into download mode, two additional times. The first time, after started FlashTool, it said download failed at 10%.After an hour I finally got it to go into download mode again. Got to 57% then said download failed. My phone won't stay on or something. Everything was going smoothly, then boom black screen download failed. This has been the problem the entire time with my phone. Sometimes I can get to the homescreen, open my texts, browser an app or 2 then freeze and black screen. It won't stay on long enough for FlashTool so what the hell do I do now?!
Now my phone won't even vibrate when I plug it in while holding Vol Up. It comes up as something slightly different in device manager though. I kept FlashTool open even with the failed download, but it says "Can't change to download mode" in the port 1 box.
Also sometimes after plugging in, when it does vibrate, the LG logo comes on instead of DL mode. When that happens my phone appears as something QualCom in device manager then disappears.
Also, does it matter if my COM41 says 'in use'?
ArcticPat said:
I managed to get into download mode, two additional times. The first time, after started FlashTool, it said download failed at 10%.After an hour I finally got it to go into download mode again. Got to 57% then said download failed. My phone won't stay on or something. Everything was going smoothly, then boom black screen download failed. This has been the problem the entire time with my phone. Sometimes I can get to the homescreen, open my texts, browser an app or 2 then freeze and black screen. It won't stay on long enough for FlashTool so what the hell do I do now?!
Now my phone won't even vibrate when I plug it in while holding Vol Up. It comes up as something slightly different in device manager though. I kept FlashTool open even with the failed download, but it says "Can't change to download mode" in the port 1 box.
Also, does it matter if my COM41 says 'in use'?
Click to expand...
Click to collapse
Now you're getting into territory that I have no experience with. I'm sorry I can't help any farther, I hope some of the more experienced xda'ers can help you out.
FesterBesterTester said:
Now you're getting into territory that I have no experience with. I'm sorry I can't help any farther, I hope some of the more experienced xda'ers can help you out.
Click to expand...
Click to collapse
lol thanks for your help! The only issue I've run into the past hour is that I haven't been able to get into Download Mode. When I hold Vol Up and connect USB it either loads the LG logo or just goes blank. Doesn't give me the 'download mode' with the blue dots.
So I'm guessing it's a bad thing if my phone shows up as Qualcomm HS-USB QDLoader 9008 (COM9)?
Phone just shuts off too fast to do anything. If I successfully make it to download mode, only shows for two minutes in device manager. Qualcomm only shows up for about 2 minutes too. What do I do? I can't even flash the 10B TOT because of this.j
It used to be hard to get the battery to charge, but now I can't get it to charge at all!
Update: I realized, the longer I leave my phone alone, the longer it stays on. I waited an hour then tried Download Mode again. Phone stayed in Download Mode long enough for me to get to the blue screen and the red 3. I forgot what to do when I got to this point so I just let it go and it turned off by itself. I took out the battery, then tried to reboot and it hit the LG logo and the little Android when you first set up your phone then black screen.
Update 2: After waiting another hour, I got the phone to sort of start up. Got to the LG logo, then the green android with a blue loading bar underneath then wham! Green screen saying Tz crash! DemiGod Crash Handler. And some other stuff. What the heck is this? Never even heard of it before.
Update 3: tried to flash again, reached the blue screen with the red 3, pulled out USB and battery then tried to boot up and doesn't even boot up.
Sorry for double post, but this is a huge update. I realized the longer I leave my phone alone, the longer it will stay on. So I left the battery out for an hour. Finally I was able to flash 10B TOT and got to the blue screen with the big 3 on it. I wasn't sure what to do so I just left it there and it eventually shut itself down. Tried to boot up and same thing, black screen after LG logo. Does this mean I'm out of luck @roirraW "edor" ehT ?
Don't tell me this has been a hardware issue the whole time... I even tried new batteries today when I went to a cell phone outlet. Tested 4 LG G3 replacement batteries all with the same blackscreen after LG logo
It does sound like hardware, but its very possible the battery itself is the only issue. Unfortunately, without a spare to try, I don't know any way of finding out for sure if that's the issue without buying a new battery. LG's had them on sale for $15 from time to time, but I don't know if they are now or if they're in stock. On the one hand, I'd hate to see you buy a new one locally only to find out that doesn't fix anything but if the battery is the only issue it's a shame to write the phone off. If you lived around Columbus, Ohio I'd offer for you to try my battery just to see what happens.
There definitely has been enough of a precedent of user's batteries being the culprit with this phone.
That's what I get for reading only 5 out of 6 of the new posts. Sorry, yeah, it doesn't sound like there's much hope. Glad you at least had a place to try a different battery without buying one. I don't know what else to suggest - you could try sending it to LG for service. I can vouch for their warranty service - I can't personally report on their out of warranty. In warranty they returned my tablet fixed four days after they paid to have it packaged and shipped to them.
EDIT: Nevermind, only read part of the post and provided bad advice, lol.
roirraW "edor" ehT said:
It does sound like hardware, but its very possible the battery itself is the only issue. Unfortunately, without a spare to try, I don't know any way of finding out for sure if that's the issue without buying a new battery. LG's had them on sale for $15 from time to time, but I don't know if they are now or if they're in stock. On the one hand, I'd hate to see you buy a new one locally only to find out that doesn't fix anything but if the battery is the only issue it's a shame to write the phone off. If you lived around Columbus, Ohio I'd offer for you to try my battery just to see what happens.
There definitely has been enough of a precedent of user's batteries being the culprit with this phone.
That's what I get for reading only 5 out of 6 of the new posts. Sorry, yeah, it doesn't sound like there's much hope. Glad you at least had a place to try a different battery without buying one. I don't know what else to suggest - you could try sending it to LG for service. I can vouch for their warranty service - I can't personally report on their out of warranty. In warranty they returned my tablet fixed four days after they paid to have it packaged and shipped to them.
Click to expand...
Click to collapse
The guy almost didn't let me try the battery. It was a dinky little stand in a farmers market and I was like let me see if they have any batteries. Luckily they did and I was like can I try it? He had the audacity to say sure but that's 20$ extra. Then I said how much is the battery? He said $40. THIS GUY!!! I almost had to beg just to see if it worked, and he finally agreed. He wouldn't even let me do it myself so I gave him my phone and he tried 3 different batteries and still the same problem.
I really appreciate that you would offer a stranger to test out your battery. It's funny that you live in Columbus because I actually go to school near there! I don't go to OSU but I go to OWU in Delaware, Ohio. But you are right, I'm not currently there but will be there soon.
Anyway, I decided that I had given it my all after trying different batteries, flashing the 10B TOT, etc. and made myself go to the Verizon store. Told the guy that greeted me that my phone wouldn't boot. Mind you I'm a little nervous because I don't want them to find out it's rooted if the 10B TOT didn't flash correctly, but I figured I'd had this phone for over two years, it's out of warranty so whatever. He tried to boot it and got nothing, not even the LG logo. So he said since the screen isn't cracked and no water damage I can get a new phone for free. You should have seen my face, my jaw dropped. I said "What?" He told me I have some warranty extension insurance. I said I know I had some insurance where I paid like 8$ a month, but I canceled that last year. He told me no, you have insurance and you pay 9$ a month. I was astonished and was like wow I thought I cancelled it, oh well, if it fixes my phone for "free" then let's do it. So now I'm eagerly waiting for the phone to arrive in the mail. I've had a brick for 4 days now so I'm feeling all kinds of disconnect. My only regret is that I didn't go into Verizon earlier.
So I'm hoping their warranty service is as great as you say. My only fear is that when I put my current battery, sim, and back cover on the new phone that it won't boot. I suppose at least I'll know for a fact that it's the battery at that point. Weird though that I've had this battery for two years and not a single issue...
Would it be wise to go through the root process again? I did all this in the first place just so I could cheat in pokemon, but then found so many cool modules from Xposed that made my life feel that much better.
ArcticPat said:
Would it be wise to go through the root process again? I did all this in the first place just so I could cheat in pokemon, but then found so many cool modules from Xposed that made my life feel that much better.
Click to expand...
Click to collapse
Only you can determine that, sorry mate.
roirraW "edor" ehT said:
Yeah, I'd definitely go the 10B TOT route.
Click to expand...
Click to collapse
I am on fulmics ROM 5.3 with 35B bootstack. Want to go back to kk10B what should i do.. Like do i need special .dll file as i use 35B bootstack?
Never used kdz or tot except for 10B on my phone. Means Never used kdz or tot to flash official lp or MM
Sent from my LG-VS985 using Tapatalk
minhas729 said:
I am on fulmics ROM 5.3 with 35B bootstack. Want to go back to kk10B what should i do.. Like do i need special .dll file as i use 35B bootstack?
Never used kdz or tot except for 10B on my phone. Means Never used kdz or tot to flash official lp or MM
Click to expand...
Click to collapse
The 35B Bootstack should allow you to use the original .DLL, because it's the correct combination of partitions from both 12B and 35B - which are necessary in order to be able to get into TWRP and as far as I'm aware allow using the old .DLL but also as far as I know and have experienced, you can use the newer .DLL any time. It's only when you're 100% stock 35B or higher that you can't flash the TOT without the newer .DLL, and can't flash KDZs older than 35B.
See post #5 of this thread for a link to a post. The post has another link to directions for Verizon. You can get the 10B TOT and the newer .DLL from my Android File Host link the bottom of the first post of @annoyingduck 's stickied return to stock thread in the General section, also in my signature below.

Categories

Resources