[Q] HBoot 1.58 AOSP? - HTC EVO 3D

Are there any aosp ROMs that will work with the new firmware/boot? If not how can I install a lower boot to work with them?

NexusS4gFreak said:
Are there any aosp ROMs that will work with the new firmware/boot? If not how can I install a lower boot to work with them?
Click to expand...
Click to collapse
not that i know of. you can try this

Nope. Just senseless ROMs. If you want an AOSP ROM just downgrade. Its not hard at all.

kevin130 said:
Nope. Just senseless ROMs. If you want an AOSP ROM just downgrade. Its not hard at all.
Click to expand...
Click to collapse
Okay thanks, if i downgrade the hboot i can always upgrade again to 1.58 for newer sense ROMs right?

efan3719 said:
not that i know of. you can try this
Click to expand...
Click to collapse
Okay thanks for the link

NexusS4gFreak said:
Okay thanks, if i downgrade the hboot i can always upgrade again to 1.58 for newer sense ROMs right?
Click to expand...
Click to collapse
If your signature is current and you are still S-ON the only way to change bootloader is to flash an RUU. If you plan on changing bootloaders in the future it would be better to get S-OFF and then you can change pretty easily whenever you want.
ramjet73

Related

[Q] hboot

hey all,
just wondering why on some roms do i need hboot 1.58?
im currently on jbear hboot something, wont that be compatable with all roms?
thanks
just wondering why on some roms do i need hboot 1.58?
Click to expand...
Click to collapse
The new kernel for ICS requires 1.58.
im currently on jbear hboot something, wont that be compatable with all roms?
Click to expand...
Click to collapse
1.58 hboot is ONLY compatible with the ICS rom and kernel. If you want to go back to a GB rom for example, you will have to downgrade your hboot.
Does the new firmware play nice with older gb roms? I havnt tried it out yet just curious.
Jsparta26 said:
Does the new firmware play nice with older gb roms? I havnt tried it out yet just curious.
Click to expand...
Click to collapse
Yes, except for the 1.58 bootloader which is technically part of the firmware.
ramjet73

GB HBOOT on ICS

hi!is there any problem if i use 1.49.11007 HBOOT(GB hboot) in ICS roms like Sense 4?
johnmarshton said:
hi!is there any problem if i use 1.49.11007 HBOOT(GB hboot) in ICS roms like Sense 4?
Click to expand...
Click to collapse
Nope non at all, I'm using it pa, jb, GB and ICS fine, no issues at all, I get no errors when using bootmanager and it trys to edit boot.img where as I was on 1.49.0053 hboot
To a point though some kernels do not play nice with hboots not compatible with the kernel. Otherwise you would end up in a boot loop.
Jsparta26 said:
To a point though some kernels do not play nice with hboots not compatible with the kernel. Otherwise you would end up in a boot loop.
Click to expand...
Click to collapse
Yeah what your saying is true, but that's only with hboots above 1.49.***

help!!!please?

Alright I'm having a few problems where no matter what Rom or kernel I install, I'm constantly getting lag and stutters. It's very annoying cause its every Rom I've flashed. Rite now I'm on cleanrom pro latest version. I've tried the one in ky Sig, cm9, slim Rom, vigor360, Nile business 3.6 and 4, rezrom, etc. I've tried a lot and all preform the same. They all lag. How can I fix this? Maybe update ruu or something? I have the latest recovery and hboot. This is getting extremely annoying now because its every Rom. I'm planning clean Rom and funky kernel as my daily driver. I have force gpu rendering enabled. Pls help. Getting extremely annoying. Ppl with the same setup don't have this problem. And yes I wipe EVERYTHING when I flash New roms and cache boot and delvik when I flash kernels.
Quadrider10 said:
Alright I'm having a few problems where no matter what Rom or kernel I install, I'm constantly getting lag and stutters. It's very annoying cause its every Rom I've flashed. Rite now I'm on cleanrom pro latest version. I've tried the one in ky Sig, cm9, slim Rom, vigor360, Nile business 3.6 and 4, rezrom, etc. I've tried a lot and all preform the same. They all lag. How can I fix this? Maybe update ruu or something? I have the latest recovery and hboot. This is getting extremely annoying now because its every Rom. I'm planning clean Rom and funky kernel as my daily driver. I have force gpu rendering enabled. Pls help. Getting extremely annoying. Ppl with the same setup don't have this problem. And yes I wipe EVERYTHING when I flash New roms and cache boot and delvik when I flash kernels.
Click to expand...
Click to collapse
Owch; yeah, go for a RUU.
darkghost568 said:
Owch; yeah, go for a RUU.
Click to expand...
Click to collapse
Alright where can I find the latest ota one and do I flash it just like anyother Rom or kernel?
Yea do RUU it usually fixes alot of issues.
jon7701 said:
Yea do RUU it usually fixes alot of issues.
Click to expand...
Click to collapse
Alright where and how do I do that?
Quadrider10 said:
Alright where and how do I do that?
Click to expand...
Click to collapse
Well it depends if you want OTA or global, I recommend the global radios since thats what most people are using now. Find the RUU which should be 4.03.605.2 and then place it on your the root of your SD as PH98IMG.zip and then it will flash.
jon7701 said:
Well it depends if you want OTA or global, I recommend the global radios since thats what most people are using now. Find the RUU which should be 4.03.605.2 and then place it on your the root of your SD as PH98IMG.zip and then it will flash.
Click to expand...
Click to collapse
Oh alright. Thought it would be like a huge process. Well since clean Rom is ota, guess ill go with that im s-off btw do I wipe anything or just flash?
Well I haven't run an ruu while s-off before but I would backup your internal sd just in case. Oh also it flashes in hboot as well dont try to flash in recovery.
Sent from my Rezound fueled by jelly beans.
jon7701 said:
Well I haven't run an ruu while s-off before but I would backup your internal sd just in case.
Sent from my Rezound fueled by jelly beans.
Click to expand...
Click to collapse
Ok. Do I wipe anything tho?
No don't wipe any thing but backup your ROM since it will be wiped. Also make sure to reread my previous post since I edited it.
Sent from my Rezound fueled by jelly beans.
jon7701 said:
No don't wipe any thing but backup your ROM since it will be wiped. Also make sure to reread my previous post since I edited it.
Sent from my Rezound fueled by jelly beans.
Click to expand...
Click to collapse
Alright idk how to flash in hboot, but I will figure that out. I can't find the latest version non global that's 4.xxxxxx
Question. Rom says based off of Leaked RUU 3.11.605.22. ROM. So does that meN I should flash that version or still the latest?
This one is the latest regular non global RUU
http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
This one is the newest of the new,global
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
mclass55 said:
This one is the latest regular non global RUU
http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Click to expand...
Click to collapse
Thanks man! And that get flashed in hboot or recovery?
Quadrider10 said:
Question. Rom says based off of Leaked RUU 3.11.605.22. ROM. So does that meN I should flash that version or still the latest?
Click to expand...
Click to collapse
That one you talking about is outdated
mclass55 said:
That one you talking about is outdated
Click to expand...
Click to collapse
Alright. And that gets flashed in hboot or recovery?
Quadrider10 said:
Thanks man! And that get flashed in hboot or recovery?
Click to expand...
Click to collapse
Hboot and let it run twice on its own
Then I always do a factory reset and then after that you will have to load a custom recovery again so you can run a custom rom
This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off (method). Installing the RUU will wipe your data.
I'm s-off unlocked by HTC boot loader, so I can tdo it? If I can, will Ihave to unlock and s-off again?
Yes your s-off and ready to run the RUU
mclass55 said:
Yes your s-off and ready to run the RUU
Click to expand...
Click to collapse
From hboot correct?
Just want to tripple check. Will I have to do s-off again tho?

[Q]

Why hboot 1.58 doesnt work with CyanogenMod 10.1 - Android 4.2.2 - Jellybean ???
What should i do if i hboot 1.58?
Dr.Pagan said:
Why hboot 1.58 doesnt work with CyanogenMod 10.1 - Android 4.2.2 - Jellybean ???
What should i do if i hboot 1.58?
Click to expand...
Click to collapse
Downgrade to hboot 1.50 or less.
It requires S-Off.
raptoro07 said:
Downgrade to hboot 1.50 or less.
It requires S-Off.
Click to expand...
Click to collapse
Actually im s-off....1.5 its better then 1.58???
Dr.Pagan said:
Actually im s-off....1.5 its better then 1.58???
Click to expand...
Click to collapse
It is if you want to run GB and/or AOSP based ROM's.
Read through this thread for more detail.
ramjet73
ramjet73 said:
It is if you want to run GB and/or AOSP based ROM's.
Read through this thread for more detail.
ramjet73
Click to expand...
Click to collapse
Thanks a lot!!!!

s-on unlocked question

I am currently s-on unlocked running meanrom 6.5, since i dont want to go thru whole process of doing s-off and installing latest radios can i just flash a jb rom with s-on and the latest radio be included in the rom?
lexcoupe2100 said:
I am currently s-on unlocked running meanrom 6.5, since i dont want to go thru whole process of doing s-off and installing latest radios can i just flash a jb rom with s-on and the latest radio be included in the rom?
Click to expand...
Click to collapse
No. Roms don't include radios or any other firmware. You'd have to relock and RUU to get the radios. And if you want the 3.16 radio you'd have to take the OTA.
tilltheend714 said:
No. Roms don't include radios or any other firmware. You'd have to relock and RUU to get the radios. And if you want the 3.16 radio you'd have to take the OTA.
Click to expand...
Click to collapse
There is a new s-off method in original development
Oooopppsssss quoted the wrong person
Sent from my PoS MoPho
tilltheend714 said:
No. Roms don't include radios or any other firmware. You'd have to relock and RUU to get the radios. And if you want the 3.16 radio you'd have to take the OTA.
Click to expand...
Click to collapse
What you mean and RUU? relock it and check for system updates for the OTA update? Thanks
lexcoupe2100 said:
What you mean and RUU? relock it and check for system updates for the OTA update? Thanks
Click to expand...
Click to collapse
The latest available RUU is for 3.15 running it will update you that far then you would have to take the OTA to get to 3.16
Sent from my PoS MoPho
bigdaddy619 said:
The latest available RUU is for 3.15 running it will update you that far then you would have to take the OTA to get to 3.16
Sent from my PoS MoPho
Click to expand...
Click to collapse
Ok so relock thru apk android and find the RUU 3.15 and flash it through apk also? then ota update? sorry for all questions.
lexcoupe2100 said:
Ok so relock thru apk android and find the RUU 3.15 and flash it through apk also? then ota update? sorry for all questions.
Click to expand...
Click to collapse
You can click the link in my sig and download the 3.15 RUU file there are instructions inside on how to relock
Sent from my PoS MoPho
bigdaddy619 said:
You can click the link in my sig and download the 3.15 RUU file there are instructions inside on how to relock
Sent from my PoS MoPho
Click to expand...
Click to collapse
I have relocked but it wont let me out of boot?? Do i need to flash the RUU now?
please help! how do i install RUU from boot page?
lexcoupe2100 said:
please help! how do i install RUU from boot page?
Click to expand...
Click to collapse
Since you relocked, I'm assuming you know how to use fastboot. Go to here and download the RUU 3.15.651.16 - HBOOT 2.09 from the right. This will give you an RUU.zip. Throw that in your fastboot folder on the pc and follow step 8 and 9. This will run the RUU and put you in 3.15 Stock.
tilltheend714 said:
Since you relocked, I'm assuming you know how to use fastboot. Go to here and download the RUU 3.15.651.16 - HBOOT 2.09 from the right. This will give you an RUU.zip. Throw that in your fastboot folder on the pc and follow step 8 and 9. This will run the RUU and put you in 3.15 Stock.
Click to expand...
Click to collapse
Downlaod the RUU even though Im coming from hboot 1.12? it says it 2.09 wont work?
lexcoupe2100 said:
Downlaod the RUU even though Im coming from hboot 1.12? it says it 2.09 wont work?
Click to expand...
Click to collapse
You're right, download either of the other two. 1.22 or 2.13.
lexcoupe2100 said:
Downlaod the RUU even though Im coming from hboot 1.12? it says it 2.09 wont work?
Click to expand...
Click to collapse
tilltheend714 said:
You're right, download either of the other two. 1.22 or 2.13.
Click to expand...
Click to collapse
Ok, is currently flashing 2.13 after its done i can take OTA for jb?
lexcoupe2100 said:
Ok, is currently flashing 2.13 after its done i can take OTA for jb?
Click to expand...
Click to collapse
As long as you don't install a custom recovery or anything you should be able to accept the ota.
ok finally!! thank you all for great help and fast response, i am currently getting the OTA update Now if I want to unlock again and install custom ROM I can do that?
lexcoupe2100 said:
ok finally!! thank you all for great help and fast response, i am currently getting the OTA update Now if I want to unlock again and install custom ROM I can do that?
Click to expand...
Click to collapse
If you take the 3.16 OTA, only the newest version of TWRP (2.4.1.0) will work. And the only roms you'll be able to use are those that use 3.16 as a base. Any other base and the touchscreen might not work.
lexcoupe2100 said:
ok finally!! thank you all for great help and fast response, i am currently getting the OTA update Now if I want to unlock again and install custom ROM I can do that?
Click to expand...
Click to collapse
Yes click the link in my sig
Sent from my PoS MoPho
bigdaddy619 said:
Yes click the link in my sig
Sent from my PoS MoPho
Click to expand...
Click to collapse
Ok I will check that out why is my baseband version still 1.12.11.1210?
lexcoupe2100 said:
Ok I will check that out why is my baseband version still 1.12.11.1210?
Click to expand...
Click to collapse
That's the radio for 3.16. It's the latest.
I am have to laugh at the original poster now. I don't want to go through the hassle of getting s-off! But now look at all the hassles you have. S-off is an easier and less hassle procedure!
Sent from my A500 using Tapatalk

Categories

Resources