Related
Hey there!
So I've read a bit lately on rooting my S2 and what not (as I decided to give it a go), and after flashing CWM Touch to my S2 I loved it and found it so much easier to install ZIP's and what not. However, on boot it disappeared, then to find that it was only a temporary Flash and when I rebooted the phone, it simply reverted back to the normal CWM.
Now before asking me to use Google or search for a thread, by god I did that. And after looking for almost 2 hours, I found nothing that gave me a definite answer whether it was possible or not. And so this is why I'm creating a thread.
So is it possible to flash CWM touch on my S2 permanently (like other phones have), or do I have to stick with the volume/power button edition.
Thanks everyone! And thanks in advance.
The recovery, it's part of the kernel so which ever version of ClockworkMod the kernel shipped with that will always be there. If you really want touch recovery, you can flash Siyah Kernel and you'll be rooted and have its touch recovery.
Sent from my GT-I9100 using Tapatalk 2
nicholas1520 said:
The recovery, it's part of the kernel so which ever version of ClockworkMod the kernel shipped with that will always be there. If you really want touch recovery, you can flash Siyah Kernel and you'll be rooted and have its touch recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hmm I hoped that wasn't the case.
But isn't there a way to use ODIN3 to flash the kernel with a custom recovery, such as the CWM touch?
Sorry if that sounds stupid, I just am new to all this.
Not sure if you are allowed to bump this or not, but I just did.
Really want to know if it is possible to flash CWM touch on the kernal guys!
xxshabsxx said:
Not sure if you are allowed to bump this or not, but I just did.
Really want to know if it is possible to flash CWM touch on the kernal guys!
Click to expand...
Click to collapse
Why don't you just keep a touch cwm.zip file in your download folder and flash that after you flash a new rom?
Sent from my GT-I9100 using xda premium
kilometers4 said:
Why don't you just keep a touch cwm.zip file in your download folder and flash that after you flash a new rom?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for the reply.
And I do have the CWM touch zip in my internalSD but there isn't and point flashing it if everytime I reboot the phone and it goes back to the stock kernel.
I just want to know if there is a method possible to flash CWM touch into the kernel, and make it permanent, or at least fine a .tar version of it so I can flash it using odin
Once again I'll bump this.
Does no one have a solution at all?
xxshabsxx said:
Once again I'll bump this.
Does no one have a solution at all?
Click to expand...
Click to collapse
Edited. Sorry, I re-read the thread. As already stated, you'll need to flash a kernel that has the version of recovery you want. If you want a different version of recovery with a specific kernel, you'll need to start making your own kernels.
ctomgee said:
Edited. Sorry, I re-read the thread. As already stated, you'll need to flash a kernel that has the version of recovery you want. If you want a different version of recovery with a specific kernel, you'll need to start making your own kernels.
Click to expand...
Click to collapse
Well I cannot find a .tar version of CWM touch so I guess I won't be able to flash the kernel.
xxshabsxx said:
Well I cannot find a .tar version of CWM touch so I guess I won't be able to flash the kernel.
Click to expand...
Click to collapse
It's in the kernel. Check out RedPill. It has touch recovery.
ctomgee said:
It's in the kernel. Check out RedPill. It has touch recovery.
Click to expand...
Click to collapse
Hmm I saw RedPill but wasn't a fan of it, I really do like CWM
Does anyone know if there is a kernel that has CWM touch in it? For CM10 preferably.
xxshabsxx said:
Hmm I saw RedPill but wasn't a fan of it, I really do like CWM
Does anyone know if there is a kernel that has CWM touch in it? For CM10 preferably.
Click to expand...
Click to collapse
Why don't you just look at the kernels in the development section, specifically for one with touch recovery? You could have found all the available options and tried them out by now.
Or are you just being lazy?
ctomgee said:
Why don't you just look at the kernels in the development section, specifically for one with touch recovery? You could have found all the available options and tried them out by now.
Or are you just being lazy?
Click to expand...
Click to collapse
No I'm not lazy, sorry if I came across that way. I am usually one to simply find something on my own, but for this I simply cannot.
I've looked and cannot find what I asked for in the OP, and am still looking and found nothing. So I simply asked a question to make sure that there isn't a possibility that it can be done.
Anyway it doesn't seem possible at the moment, so I guess I'll wait.
Good day guys
1.Does cm10 compatible with siyah kernel?
2.is cm10 now official or beta?
3.can i just use the backup from cwm if i want to restore things after i flash cm10?
4.cm9 or cm10? (Better)
5.if i flash custom rom does it unroot my phone and remove cwm options?
monarchs said:
Good day guys
1.Does cm10 compatible with siyah kernel?
2.is cm10 now official or beta?
3.can i just use the backup from cwm if i want to restore things after i flash cm10?
4.cm9 or cm10? (Better)
5.if i flash custom rom does it unroot my phone and remove cwm options?
Click to expand...
Click to collapse
1. Not sure if its been updated... you could ask or check in the respective thread.
2. Official Nightlies just dropped for select devices.. check dev section.
3. Yes
4 Neither.. CM9 based on ICS, CM10 based on JB.. Both are awesome and JB is the newest shiz so... (and actually CM9 may have more features right now)
5. 99% of the time no. Unless you flash a ROM w/ Odin that does not have root or CWM. But- most, if not all, the custom ROMs you find here will have root and CWM. Just look at the ROM features before flashing!
Sent from my Transformer Prime TF201 using xda premium
monarchs said:
Good day guys
1.Does cm10 compatible with siyah kernel?
2.is cm10 now official or beta?
3.can i just use the backup from cwm if i want to restore things after i flash cm10?
4.cm9 or cm10? (Better)
5.if i flash custom rom does it unroot my phone and remove cwm options?
Click to expand...
Click to collapse
Answer for 1. is YES it's compatible with CM10. Just look at the thread title of siyah kernel.
The rest bit is already answered by Coreym
monarchs said:
Good day guys
1.Does cm10 compatible with siyah kernel?
2.is cm10 now official or beta?
3.can i just use the backup from cwm if i want to restore things after i flash cm10?
4.cm9 or cm10? (Better)
5.if i flash custom rom does it unroot my phone and remove cwm options?
Click to expand...
Click to collapse
1. Yes siyah supports cm10. Says so in the title. Always read the change logs for important info
2. It's in beta sort of. They're releasing previews that are quite usable. I'm using it atm. Only annoying bug is the memory leak that can easily be solved by rebooting the phone. 3. Restore only app apks, not phone settings. Restore app data at your own risk.
4. Depends on if you're looking for stability. CM9 is stable but I like JB and I'm going to be sticking with CM10
5. No it doesn't. Flashing a stock rom with stock kernel will unroot it. Custom roms will not
Sent from my GT-I9300 using xda app-developers app
Many thanks guys i really appreciate it! Its a big help! Sorry for the late reply!
Oh guys one more thing,my phone version is 4.0.4 which is ics,how can i make it jelly bean? Maybe you can give me a link to download it. Thanks in advance!
monarchs said:
Oh guys one more thing,my phone version is 4.0.4 which is ics,how can i make it jelly bean? Maybe you can give me a link to download it. Thanks in advance!
Click to expand...
Click to collapse
Jelly bean has not yet been released by Samsung .
There are a number of leaked beta test roms of JB in the forum but repeat beta leaked test roms expect problems .
jje
Ahmm... can anyone please give me a link for me to download cm9 for sgs3 i9300 thanks much..
And im trying to flash a boot animation(zip file) but it always sez installation aborted. Is it not compatible with my device? I have siyah kernel and stock rom..
I hope your not getting too tired to answer my noob questions..
monarchs said:
Ahmm... can anyone please give me a link for me to download cm9 for sgs3 i9300 thanks much..
And im trying to flash a boot animation(zip file) but it always sez installation aborted. Is it not compatible with my device? I have siyah kernel and stock rom..
I hope your not getting too tired to answer my noob questions..
Click to expand...
Click to collapse
Go to the Original Development section and get CM9 from there. Its good for you to navigate around the site and get comfortable where stuff is. In regards to the bootani, in my experience you change this by modifying /system/media/bootanimation.zip. You can try swapping the new bootanimation.zip with the old bootani.zip and see if that works. But I've never flashed a .zip to change the bootani.. but to be fair its been a long time since I've had any desire to change the bootanimation
Sent from my GT-I9300 using xda premium
Can you give me a link for original development section... pls. Pls .pls.
monarchs said:
Can you give me a link for original development section... pls. Pls .pls.
Click to expand...
Click to collapse
Lol.. sorry. Like I said you need to get comfortable with this site and not just ask for links.. if you can't find em sure, but you need to try. You can do it two ways- on your PC: at the XDA home page you'll see 2 search boxes near the top and to the right. The box that says "find your device" ..type your phone in there and choose it when the option comes up. Then scroll down.. bam- OG Dev Forum! Or download the XDA app and find your device that way-
I hope you find it but I'm confident you will
Sent from my Galaxy Nexus using xda premium
Found it!!! And downloaded cm9 for s3! Thanks!
monarchs said:
Found it!!! And downloaded cm9 for s3! Thanks!
Click to expand...
Click to collapse
Awesome dude!!
Glad you found it.. take a little extra time and check out some of the stickies (threads pinned to the top of the page) in the General section and Q&A..lots of helpful info!
Enjoy your CM'd S3!
Sent from my Galaxy Nexus using xda premium
Thanks for the help!! Fyi im not a dude! Hihi
monarchs said:
Thanks for the help!! Fyi im not a dude! Hihi
Click to expand...
Click to collapse
Lol oops!
Sent from my Galaxy Nexus using xda premium
Dear reader,
I've currently been using Cyanomod for 2.3.7 Gingerbread.
My phone is rooted and everything (which took a little while )
Everything is running perfectly fine, but i would like to update my phone to android 4.0+ (whatever the lastest compatible version might be)
How should i go about this?
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
TJ007 said:
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Do i need to re-root my phone when i install a new Rom? Or should i just install it through recovery?
Rom's are pre rooted (expect stock, stock BASED roms ARE pre-rooted), once you've installed the rom through cwm, it will be rooted and ready.
cashtecz said:
Dear reader,
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
mikii100297 said:
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
Click to expand...
Click to collapse
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
nh1402 said:
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
Click to expand...
Click to collapse
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
sarangkunte05 said:
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
cashtecz said:
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
Click to expand...
Click to collapse
The fastest way to flash a kernel is to use the program called flashtool, click on the lightening bolt, select Fastboot mode, then select kernel to flash find the kernel you want to flash and it should be done within literally 2 seconds. once Flashtool gives you the all clear, disconnect your phone from usb, restart phone, and there you go, the old kernel will be overwritten, and so will that kernel's cwm version, with the one from the new kernel.
Try FXP138
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
i would also suggest you to try FXP138 which is CM9.1 Android 4.0.4, Its pretty smooth and the brightness bug seems to be resolved:laugh: in FXP138 here's the link http://forum.xda-developers.com/showthread.php?t=1409053
Also here is a link for ROM comparison - http://forum.xda-developers.com/showthread.php?t=1843741
Hope this helps!
FXP138-cm-9-20120916-UNOFFICIAL-urushi
cashtecz said:
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
Click to expand...
Click to collapse
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
ramakrishnanjk said:
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
Click to expand...
Click to collapse
Nevermind, i figured it out!
cashtecz said:
Nevermind, i figured it out!
Click to expand...
Click to collapse
Hey,
Everything is installed and running, however i am wondering about just one thing.
Whenever i reboot my phone i get, right after imputting my sim code, a Unlock Network SIM message.
What is this and how can i solve it?
Regards,
(oops just realized i made a double post, apologies!)
Hello all,
I am about to flash my GS2 - i9100 with Siyah kernel 4.1.5 and dual boot
will i be needing to install the apps that i need into both the ROMs or installing it into one of them will suffice ?
Abhijit30 said:
Hello all,
I am about to flash my GS2 - i9100 with Siyah kernel 4.1.5 and dual boot
will i be needing to install the apps that i need into both the ROMs or installing it into one of them will suffice ?
Click to expand...
Click to collapse
hey ma8, in dual boot only the kernel is shared b/w the roms
the apps have to be installed individually for each roms
Sun90 said:
hey ma8, in dual boot only the kernel is shared b/w the roms
the apps have to be installed individually for each roms
Click to expand...
Click to collapse
i guess i ws kinda expecting this. But just wanted to clarify once before i start. Thanks a lot !
Abhijit30 said:
i guess i ws kinda expecting this. But just wanted to clarify once before i start. Thanks a lot !
Click to expand...
Click to collapse
ur welcome ma8, its always better to clarify things before doing it when urn't shure about it
but is there any possibility that i can keep my current rooted stock firmware with Siyah Kernal and flash a secondary ROM too ?
Plus, any way i can back up my Memo ?
Abhijit30 said:
but is there any possibility that i can keep my current rooted stock firmware with Siyah Kernal and flash a secondary ROM too ?
Plus, any way i can back up my Memo ?
Click to expand...
Click to collapse
yes u can keep ur current stock firmware(has to be ICS) as ur primary rom along with Siyah kernel version which supports dual boot (Ex v4.1.5 of siyah) and flash any Custom rom of ur Choice which has to be ICS or JB (do not ask which one though since its against XDA rules!) as ur Secondary rom and see
for backing up of memo u can try some apps from stores and see
I just flashed my phone with the Siyah Kernal...
I have the stock firmware as my primary one ( ICS 4.0.3 ) and i wish to have a CM10 ROM as my secondary ...
http://forum.xda-developers.com/showthread.php?t=1794758
As per the above link, since i m doing it for the first time, i hv to flash the two mentioned files from the SD n then hv a factory reset else it will get stuck at boot...
is it so ? do i hv to do that inspite of having that as a secondary ROM ?
I am following http://forum.xda-developers.com/showthread.php?t=1680851 this thread to enable dual boot ROMs..
pls tell me if i m doing something wrong....
1. Flash Siyah
2. Flash CM10 as 2nd ROM under dual-boot options in CWM
3. Reboot
przemcio510 said:
1. Flash Siyah
2. Flash CM10 as 2nd ROM under dual-boot options in CWM
3. Reboot
Click to expand...
Click to collapse
i do not have to flash GAPPS in that case, right ?
Thanks for your response...i just started with the flashing process
done with it....unable to boot into secondary ROM....phone kind of power offs after i try to boot into secondary ROM...
can u pls help ?
Of course you must flash gapps; I hadn't medtioned about it because I thought you remember about it.
Abhijit30 said:
i do not have to flash GAPPS in that case, right ?
Thanks for your response...i just started with the flashing process
done with it....unable to boot into secondary ROM....phone kind of power offs after i try to boot into secondary ROM...
can u pls help ?
Click to expand...
Click to collapse
Siyah 4.1.5 is not compatible with the latest CM10 (JB Mali version) and all JB ROMs based on this build. Therefore Siyah cannot boot it.
przemcio510 said:
Of course you must flash gapps; I hadn't medtioned about it because I thought you remember about it.
Click to expand...
Click to collapse
Well, i did flash GAPPS too into the secondary ROM the way it was mentioned. Still the same state, it says booting into 2nd ROM n then everything goes blank...
Abhijit30 said:
Well, i did flash GAPPS too into the secondary ROM the way it was mentioned. Still the same state, it says booting into 2nd ROM n then everything goes blank...
Click to expand...
Click to collapse
You've posted the same question herehttp://forum.xda-developers.com/showthread.php?p=32473074 its already been answered
Sent from my GT-I9100 using xda app-developers app
Jokesy said:
Siyah 4.1.5 is not compatible with the latest CM10 (JB Mali version) and all JB ROMs based on this build. Therefore Siyah cannot boot it.
Click to expand...
Click to collapse
He can because I have 1 first Rom as stock secondary cm10 and they working
Send form Galaxy S2. Using XDA Premium
Paulius7 said:
He can because I have 1 first Rom as stock secondary cm10 and they working
Send form Galaxy S2. Using XDA Premium
Click to expand...
Click to collapse
You probably have an older version of CM10.. Not the latest build mate
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
You've posted the same question herehttp://forum.xda-developers.com/showthread.php?p=32473074 its already been answered
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I had to do that bro...coz at mid night i was stuck and there was no response on this post.
Anyway, i had downloaded the 6th october build of CM10 from http://www.get.cm/?device=i9100
Like i got to know, the latest build might not be compatible. So, now I am downloading the 1st october build (thats the oldest nightly build available dats y)
Should that be fine ?
It might be. But I'm not a 100% positive. You could try n if you're not able to boot, then download another one of the custom ROMs built with a cm10 base available in the development section for now.until siyah is updated to include the new code.
Alternative is to flash the cm10 ROM and stick with the cm kernel for now.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
You probably have an older version of CM10.. Not the latest build mate
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Ah. Sorry I don't see it
Send form Galaxy S2. Using XDA Premium
Paulius7 said:
He can because I have 1 first Rom as stock secondary cm10 and they working
Send form Galaxy S2. Using XDA Premium
Click to expand...
Click to collapse
What version of CM10 u using bro ?
I use jelly king on cm10. But no AOKP(AOSP I don't remember name)
Send form Galaxy S2. Using XDA Premium
this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
There are a lot of stable roms. Do you want touchwiz based or AOSP based? I don't have an opinion on AOSP roms because I've barely used any of them.
For Samsung based roms, Shoman94's roms are very stable and popular. That's what I use as my daily driver. For ICS, use SHOstock2, but for the latest JB use SHOstock3.
Vintage144 said:
this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
Click to expand...
Click to collapse
When you flash a new ROM you will have to wipe. Also that's caused by using a foreign kernel aka one from galaxys2root.com
Sent from my GS4 running CM11 Kandy Kane
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Vintage144 said:
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Click to expand...
Click to collapse
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Thank you, I got the siyah kernel from a thread here,when I first got the phone (off ebay )it did in fact have the wrong kernel,I used entropy flash back to get back,I guess I did something else,but I will use one of the roms you mentioned ,glad we have you here ,I've been messing with wp7 the last few years and finally getting back to android (cept been playing with boot loaders in a500)
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Strangely enough ,o couldn't get restore to work from cwm BUT there was a cwm app I had and when it came back all my backups were there I went back to one to get back to where I was,will flash the roms you talked about for sure at 20% now so will have to wait
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Click to expand...
Click to collapse
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
beneff said:
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
Click to expand...
Click to collapse
Please use the guide "how to flash custom binaries without incrementing the flash counter" which is a link in my signature.
Sent from my SGH-I777 using xda app-developers app
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Vintage144 said:
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
creepyncrawly said:
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
Click to expand...
Click to collapse
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
beneff said:
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
Click to expand...
Click to collapse
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Thank you very much creepy ,your page is awesome and your advice the shostock rom is great
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Click to expand...
Click to collapse
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
beneff said:
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
Click to expand...
Click to collapse
Any
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
Any
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
Thanks a million.