Ok, here's a story.
Firstly, I switch Fw from 431 to 587 using Flashtool
I've been using Adv Stock Kernel of Sirkay for both of this Rom.
One day, I'm fed up with the Adv Stock Kernel
I decided to switch to xRay 9.587-c
It boot passes the kernel screen into boot animation
But it stuck at my boot animation screen
Stuck
Stuck
Stuck
....(15 minutes)
Stuck
I plugged off the battery, trying to reboot, it boot, pass the kernel screen
and the same thing repeats again
and
again
I reflashed 587 rom again, it boots successfully, switched kernel, boots successfully again, so I decided to push some of my mod into the phone via cwm recovery
Connected to the Pc, I reboot, and it hangs again, this time, stuck at kernel screen, can't go into recovery
so I reflashed the fw 587 via flashtool again, it boots successfully with custom kernel
tried my framework mod, it won't boot, revert back to original framework mod, boot stuck still
so I reflashed fw 587 again, it works, but I'm very careful now
#Suppose that fota in flashtool should be unchecked, right?
#is my trim area damaged????
I need desperate help, guys and devs, I'm so afraid of rebooting now. LOL
Related
Hi, my device is neo V and I am using CM7.2RC2,
i flashed the camera patch through CWM and everything was fine,
but after I flashed the baseband 64 of Neo from the CM7 post,
my phone doesn't boot! it stucks in the FreeXperia logo... (but can enter CWM)
I tried to wipe data and cache then flash CM7 again, this time the CM7 logo appears, then black screen>CM7 logo>black screen...
I also tried to flash the kernel again through fastboot but it doesn't help...
Then I flash the official ICS, an error logo appears...
What should I do to get my phone working again?
After flashing to the official ICS, it should be baseband 70,
Since only an error logo appears, I flashed the CM7 kernel and CM7 ROM again,
but I still stuck in a boot loop...
Reflash default 2.3.4 Gingerbread using Flashtool.I've had the same problem,but my Neo didn't booted at all,it stayed in bootloop,and i have a friend which had the same problem.
georgeiulian89 said:
Reflash default 2.3.4 Gingerbread using Flashtool.I've had the same problem,but my Neo didn't booted at all,it stayed in bootloop,and i have a friend which had the same problem.
Click to expand...
Click to collapse
Thank you very much it really worked.
When me phone didn't boot I scared the **** out of me
But I will try CM7.2 again
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Madpiercing said:
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
What do you see when you're booting your phone?
Fastboot Mode? Stuck at LG logo?
Sent from my LG-P500 using xda premium
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
when you see the battery logo..hold power button again..and your phone will boot normally..
If dont works so go to recovery a and from cwm reboot system..other way to start the phone..
LG-P500-ICS-4.0.4
I've done it guys.. I had to install again gingerbred and 20G with KDZ, then re rooted, donwloaded rom manager, installed CWM, and then i installed again CM9 and it worked.. dunno what's gone wrong last time, i have done the exacts same steps and now it works!
Thanks for the help
Well, this is what happened.
My phone was using cMiui 4.1.2 with the default kernel, and this morning I tried to flash CM7. I wiped everything as always before flashing, after I pushed reboot system and it got stuck in the "Galaxy s2" screen and keeps turning on and off endlessly.
I pulled out the battery, try to get back into recovery, but it hadn't been a successful attempt.
I stayed claim and flash back to stock 4.0.4 via Odin, god-bless I made it through.
I installed a custom kernel and flash to CM9 for temporarily use. Now I don't know what to do.
I really want to try the taste of CM7, please help.
Edit: I also tried various way of flashing, such as flash a codeworkx kernel before flashing, and flash back into GB 2.3.5 before flashing CM7, both didn't work out
it was making me crazy for weeks and here is the solution i found 5 minutes ago :
when it gets bootloop
go to download mod and flash siyah 2.6.14 via odin!
then it boots.
Hi guys just did something real stupid today... I tried flashing the maximus1.2 custom rom and ended up stuck in a bootloop. After that i tried to flash the maximus 1.0 rom and it work again... Stupidly enough i tried to flash the maximus 1.2 rom again and this time it went back to the bootloop but however this time i can't access to clockmodrecovery to flash back to the stock rom. everytime i enter the recovery mode, it just crashes itself and reboot and enters recovery and crashes again, the cycle repeats. When i enter bootloader, somehow i can't flash back the clockmod rom cause it keep saying waiting for device. Is it possible that the device itself is bricked?
Hi, few month ago, I have unlocked the bootloader, rooted my phone, and installed CWM and CM 11.
It was quite buggy, and OTA updates didn't work, and I needed something more stable.
Yesterday, I wanted to reboot into recovery, and try flashing SlimKat or a newer CM if I don't like the Slimkat.
The combination of keys for Recovery didn't work and there wasn't any reasonable way to get around it.
On adb, the phone got detected, but offline, so I wasn't able to reboot into recovery this way.
Fast forward couple of hours, I have tried flashing about everything, but didn't manage anything besides being able to pass adb commands.
Now,
- when I turn on the phone the phone hangs on the Sony logo and I have to force turn it off
- I get the phone on ADB even when it keeps hanging on the Sony logo
- I can get into Fastboot by holding the up button on conneting to computer
- I have flashed the boot.img from CM11 for XPeria P to bring CWM back, but didn't happen, or did happen, but I can't get into recovery
- "adb reboot recovery" brings me to the same old hanging SONY logo.
- pushing whatever on boot doesn't help > SONY logo
Please help!
Why not just flash stock with flashtool?
[SOLVED] Partially...
I have downloaded FTF file for the device, and manage to flash it using Flashtool (worked only if I flashed incl. Kernel) and got the device up and running. I tried reflashing CM and Slim again, but none worked as I still wasn't able to get into recovery, so I reflashed once more. Finally, the device is working - with the stock firmware, at least...
davidszedely said:
worked only if I flashed incl. Kernel
Click to expand...
Click to collapse
This is a solution. When you flashing CM you need to flash CM kernel too. In some cases kernel needs to be flashed several times(for example before flashing CM and after flashing it).
Sorry for my bad English.
Thanks a lot for explanation. I'm happy to have the stock now, and will probably stick with it for the time being.