Hi, my device is neo V and I am using CM7.2RC2,
i flashed the camera patch through CWM and everything was fine,
but after I flashed the baseband 64 of Neo from the CM7 post,
my phone doesn't boot! it stucks in the FreeXperia logo... (but can enter CWM)
I tried to wipe data and cache then flash CM7 again, this time the CM7 logo appears, then black screen>CM7 logo>black screen...
I also tried to flash the kernel again through fastboot but it doesn't help...
Then I flash the official ICS, an error logo appears...
What should I do to get my phone working again?
After flashing to the official ICS, it should be baseband 70,
Since only an error logo appears, I flashed the CM7 kernel and CM7 ROM again,
but I still stuck in a boot loop...
Reflash default 2.3.4 Gingerbread using Flashtool.I've had the same problem,but my Neo didn't booted at all,it stayed in bootloop,and i have a friend which had the same problem.
georgeiulian89 said:
Reflash default 2.3.4 Gingerbread using Flashtool.I've had the same problem,but my Neo didn't booted at all,it stayed in bootloop,and i have a friend which had the same problem.
Click to expand...
Click to collapse
Thank you very much it really worked.
When me phone didn't boot I scared the **** out of me
But I will try CM7.2 again
Related
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Madpiercing said:
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
What do you see when you're booting your phone?
Fastboot Mode? Stuck at LG logo?
Sent from my LG-P500 using xda premium
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
when you see the battery logo..hold power button again..and your phone will boot normally..
If dont works so go to recovery a and from cwm reboot system..other way to start the phone..
LG-P500-ICS-4.0.4
I've done it guys.. I had to install again gingerbred and 20G with KDZ, then re rooted, donwloaded rom manager, installed CWM, and then i installed again CM9 and it worked.. dunno what's gone wrong last time, i have done the exacts same steps and now it works!
Thanks for the help
Ok, here's a story.
Firstly, I switch Fw from 431 to 587 using Flashtool
I've been using Adv Stock Kernel of Sirkay for both of this Rom.
One day, I'm fed up with the Adv Stock Kernel
I decided to switch to xRay 9.587-c
It boot passes the kernel screen into boot animation
But it stuck at my boot animation screen
Stuck
Stuck
Stuck
....(15 minutes)
Stuck
I plugged off the battery, trying to reboot, it boot, pass the kernel screen
and the same thing repeats again
and
again
I reflashed 587 rom again, it boots successfully, switched kernel, boots successfully again, so I decided to push some of my mod into the phone via cwm recovery
Connected to the Pc, I reboot, and it hangs again, this time, stuck at kernel screen, can't go into recovery
so I reflashed the fw 587 via flashtool again, it boots successfully with custom kernel
tried my framework mod, it won't boot, revert back to original framework mod, boot stuck still
so I reflashed fw 587 again, it works, but I'm very careful now
#Suppose that fota in flashtool should be unchecked, right?
#is my trim area damaged????
I need desperate help, guys and devs, I'm so afraid of rebooting now. LOL
i am using LWW wt19i.i recently rooted my phone and then decided to try a custom rom.i downloaded real ics r6.when i run it in cwm mode and after installation it says to reboot the system.everything seems to go fine the sony logo appears then after a while it reboots gets stuck in the sony logo and there are several boot loops.how can i solve this problem???
plsss help
Thanks in advance...
flash stock firmware with flashtool, and repeat process. make sure you followed the instructions properly
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
rho57 said:
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
Click to expand...
Click to collapse
Maybe you got your kernel and rom from the wrong place. If you have an X10MiniPro make sure you get kernel and rom from the x10minipro section too, and not from the x10mini section. Although the phones seem similar apart from the keyboard, they do have a different digitizer too.
rho57 said:
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
Click to expand...
Click to collapse
On which kernel are you now? If you're on a JB kernel, make a full wipe ( data,cache,dalvik-cache,system), install a GB Kernel and then install GDX. If you're on a GB kernel, also make a full wipe and then install GDX. Of course, make sure youre using the right ROM and kernel for your device.
Please press thanks if I helped .
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh: