[Stock ICS] EAP-SIM enable - Sony Xperia P, U, Sola, Go

Hi,
I'm realy excited to show you how to enable EAP-SIM on your phone (or in case on same of mine )
I'm on sony Acro S (LT26w)
So my provider is "Free Mobile" in france and allow me to use EAP-Sim, for a long time i search how to use it, enable it, but i didn't found a real good patch.
So after search on my phone i found a parameter that enable EAP-SIM when you configure your Wifi
the easiest way for me.
First , your phone must be rooted
So now, the How to :
1) Go to Wpa_supplicant.conf in /data/misc/wifi/
2) Modifi : update_config=1 to update_config=2
So you should show this :
Code:
ctrl_interface=wlan0
driver_param="use_p2p_group_interface=1"
update_config=2
device_name=LT26w
manufacturer=Sony Ericsson
model_name=LT26w_XXXX-XXXX
model_number=LT26w
serial_number=XXXXXX
device_type=XXXXXXXXXX-X
config_methods=physical_display virtual_push_button keypad
network={
ssid="freebox_Pims"
psk="1234567890"
key_mgmt=WPA-PSK
priority=3
}
3) Save the Change
4) Go to Wifi parameter
5) Select FreeWifi_Secure
6) Now You should be able to Select Sim as Methode EAP
After that in wap_supplicant.comf should show that :
Code:
ctrl_interface=wlan0
driver_param="use_p2p_group_interface=1"
update_config=2
device_name=LT26w
manufacturer=Sony Ericsson
model_name=LT26w_XXXX-XXXX
model_number=LT26w
serial_number=XXXXXX
device_type=XXXXXXXXXX-X
config_methods=physical_display virtual_push_button keypad
network={
ssid="freebox_Pims"
psk="1234567890"
key_mgmt=WPA-PSK
priority=3
}
network={
ssid="FreeWifi_secure"
key_mgmt=WPA-EAP IEEE8021X
eap=SIM
identity="[email protected]"
pcsc="TRUE"
priority=5
}
NOTE : If you can't start your wifi after a restart your phone , juste delete wpa_supplicant.conf and go to your wifi parameter to configure your wifi ( sim should appear )
I hope that help You
Give me your feedback it should be able on all Sony 2012 device and maybe More
If i help you, hit thanks
PS : Scuze for my english
Code:
[FONT="Courier New"]
[B]Phone Rom Android V Status[/B]
[COLOR="SeaGreen"]Sony XPERIA ACRO S Stock ICS 6.1.A.2.50 4.0.4 OK[/COLOR]
[COLOR="Red"]Sony XPERIA X10 Fera ROM V20 3.3.9 KO[/COLOR]
[/FONT]

"scuze for my english" are you from RO?

No, as you can read in OP i leave in france and i m french,
Thanks for your feedback

this is for any network with provide free wifi or private wifi?

oache said:
this is for any network with provide free wifi or private wifi?
Click to expand...
Click to collapse
No, this is to enable EAP-SIM on your ROM, when i say Free in OP it's the name of my provider " FREE Mobile" this should be ok for "SFR Mobile " to

A thread in general that is neither a bash Sony circlejerk, nor a repeated question nor a rumor mill? Here's your well deserved thanks button click OP.

Pims83 said:
Hi,
I'm realy excited to show you how to enable EAP-SIM on your phone (or in case on same of mine )
I'm on sony Acro S (LT26w)
So my provider is "Free Mobile" in france and allow me to use EAP-Sim, for a long time i search how to use it, enable it, but i didn't found a real good patch.
So after search on my phone i found a parameter that enable EAP-SIM when you configure your Wifi
the easiest way for me.
First , your phone must be rooted
So now, the How to :
1) Go to Wpa_supplicant.conf in /data/misc/wifi/
2) Modifi : update_config=1 to update_config=2
So you should show this :
Code:
ctrl_interface=wlan0
driver_param="use_p2p_group_interface=1"
update_config=2
device_name=LT26w
manufacturer=Sony Ericsson
model_name=LT26w_XXXX-XXXX
model_number=LT26w
serial_number=XXXXXX
device_type=XXXXXXXXXX-X
config_methods=physical_display virtual_push_button keypad
network={
ssid="freebox_Pims"
psk="1234567890"
key_mgmt=WPA-PSK
priority=3
}
3) Save the Change
4) Go to Wifi parameter
5) Select FreeWifi_Secure
6) Now You should be able to Select Sim as Methode EAP
After that in wap_supplicant.comf should show that :
Code:
ctrl_interface=wlan0
driver_param="use_p2p_group_interface=1"
update_config=2
device_name=LT26w
manufacturer=Sony Ericsson
model_name=LT26w_XXXX-XXXX
model_number=LT26w
serial_number=XXXXXX
device_type=XXXXXXXXXX-X
config_methods=physical_display virtual_push_button keypad
network={
ssid="freebox_Pims"
psk="1234567890"
key_mgmt=WPA-PSK
priority=3
}
network={
ssid="FreeWifi_secure"
key_mgmt=WPA-EAP IEEE8021X
eap=SIM
identity="[email protected]"
pcsc="TRUE"
priority=5
}
NOTE : If you can't start your wifi after a restart your phone , juste delete wpa_supplicant.conf and go to your wifi parameter to configure your wifi ( sim should appear )
I hope that help You
Give me your feedback it should be able on all Sony 2012 device and maybe More
If i help you, hit thanks
PS : Scuze for my english
Code:
[FONT="Courier New"]
[B]Phone Rom Android V Status[/B]
[COLOR="SeaGreen"]Sony XPERIA S Stock ICS 6.1.A.2.50 4.0.4 OK[/COLOR]
[COLOR="Red"]Sony XPERIA X10 Fera ROM V20 3.3.9 KO[/COLOR]
[/FONT]
Click to expand...
Click to collapse
Sorry for noob question! For what is this
EAP-SIM
Sent from my LT26i using xda premium

It's à méthode to auto-connect to wifi with your SIM card
http://en.m.wikipedia.org/wiki/EAP-SIM
Sent from my LT26w using xda app-developers app

EAPSIM
Bonjour OP,
je vois que vous etes francais.
ca marche pas sur un zte blade san francisco.je suis sous ics android 4.0.4
dommage!!!
je ne trouve rien sur internet

MECHOUGAT25 said:
Bonjour OP,
je vois que vous etes francais.
ca marche pas sur un zte blade san francisco.je suis sous ics android 4.0.4
dommage!!!
je ne trouve rien sur internet
Click to expand...
Click to collapse
only english here!

nickholtus said:
only english here!
Click to expand...
Click to collapse
+10
If u cant speak English
There exits gôögle translatê

MECHOUGAT25 said:
Bonjour OP,
je vois que vous etes francais.
ca marche pas sur un zte blade san francisco.je suis sous ics android 4.0.4
dommage!!!
je ne trouve rien sur internet
Click to expand...
Click to collapse
Please post in English

Oh sorry !!
I'm searching a method like this for my zte blade san francisco.
I have a phone rooted android 4.0.4;
THANKS

Pims83 said:
Hi,
I'm realy excited to show you how to enable EAP-SIM on your phone (or in case on same of mine )
I'm on sony Acro S (LT26w)
So my provider is "Free Mobile" in france and allow me to use EAP-Sim, for a long time i search how to use it, enable it, but i didn't found a real good patch.
So after search on my phone i found a parameter that enable EAP-SIM when you configure your Wifi
the easiest way for me.
First , your phone must be rooted
So now, the How to :
1) Go to Wpa_supplicant.conf in /data/misc/wifi/
2) Modifi : update_config=1 to update_config=2
Click to expand...
Click to collapse
changing update_config from 1 to 2 does not help.
ref android.googlesource.com/platform/external/wpa_supplicant_6/+/master/wpa_supplicant/config.h
Code:
/**
* update_config - Is wpa_supplicant allowed to update configuration
*
* This variable control whether wpa_supplicant is allow to re-write
* its configuration with wpa_config_write(). If this is zero,
* configuration data is only changed in memory and the external data
* is not overriden. If this is non-zero, wpa_supplicant will update
* the configuration data (e.g., a file) whenever configuration is
* changed. This update may replace the old configuration which can
* remove comments from it in case of a text file configuration.
*/
int update_config;

Related

Need some translations for the ROMkitchen

Hello Guys.
I'm doing some work in my kitchen therefore i need some translations.
I do not speek any of these languages, but i'm be sure we have some native spekers here in the board. ;-)
I require following languages:
French, spanish and italian
The given words are:
Owner Info
Contacs
GPRS-Authentification
Auto-Configuration
add ringtone
Device-Informationen
save permanent
Power
Microphone Gain
Backlight
Certifikates
Phone
Connections
Map Settings
Clock
Beam
Today
Menus
Remove Programs
Sounds & Notifications
Input
Memory
Password
Keys
Touchscreen
Info
Search & Explore
System Tools
Hope you could help me......
Post it here or write me a PM.....
Thx a lot...
Stefan
Glad to help LumpiStefan!
Here you have the Spanish translations:
Información del Propietario
Contactos
Autenticación GPRS
Auto Configuración
Agregar Ringtone
Información del Dispositivo
Guardar en forma permanente
Encendido (Power has many spanish translations, it depends on the environment that is applied)
Ganancia del Micrófono
Retroiluminación
Certificados
Teléfono
Conexiones
Configuración de Mapas
Reloj
Apunte (Has also many translations, I translated it for the action of "Beaming to another device")
Hoy
Menues
Quitar Programas
Sonidos y Notificaciones
Entrada
Memoria
Contraseña
Teclas
Pantalla
Info
Buscar y Explorar
Herramientas del Sistema
Hope that helps
Marton
LumpiStefan said:
Hello Guys.
I'm doing some work in my kitchen therefore i need some translations.
I do not speek any of these languages, but i'm be sure we have some native spekers here in the board. ;-)
I require following languages:
French, spanish and italian
Thx a lot...
Stefan
Click to expand...
Click to collapse
Hi LumpiStefan, I'm surprised that you don't need the Translation of another major language "Bavarian"
In case that you are planning this for the future, I'm attaching the translation ! :wink:
Regards
cimber ( Munich)
Thx @ Marton and cimber .......
@cimber: Will take a look at it. But i will prefer the swabian slang ;-)
Maybe sometimes i will translate it in the "Weiss-Wurscht"-language.....
:roll:
Stefan
En français !
Owner Info : Informations propriétaire
Contacs : contacts
GPRS-Authentification : autentification GPRS
Auto-Configuration : configuration automatique
add ringtone : ajouter une sonnerie
Device-Informationen : informations périphérique
save permanent : sauvegarde permanente
Power : alimentation
Microphone Gain : correction micro
Backlight : rétro-éclairage
Certifikates : certificats
Phone : téléphone
Connections : connexions
Map Settings : need context to translate!
Clock : horloge
Beam : faisseau
Today : aujourd'hui
Menus : menus
Remove Programs : suppression de programmes
Sounds & Notifications : sons et notifications
Input : entrée
Memory : mémoire
Password : mot de passe
Keys : touches
Touchscreen : écran tactile
Info : Info
Search & Explore : rechercher et explorer
System Tools : utilitaires système
Hope you could help me...... J'espère que vous pourrez m'aider (oops!)
Regards from Belgium.
Kitarolivier.
LumpiStefan said:
Thx @ Marton and cimber .......
@cimber: Will take a look at it. But i will prefer the swabian slang ;-)
Maybe sometimes i will translate it in the "Weiss-Wurscht"-language.....
:roll:
Stefan
Click to expand...
Click to collapse
Do you plan to translate it into hungarian?
slovak??
Bahasa
How about 'Bahasa Indonesia' ?
Here's italian:
Owner Info= Info Proprietario
Contacs= Contatti
GPRS-Authentification= Autenticazione-GPRS
Auto-Configuration= Autoconfigurazione
add ringtone= Aggiungi ringtone
Device-Informationen= Informazioni-Dispositivo
save permanent= Salvataggio permanente
Power= Accensione
Microphone Gain= Guadagno Microfono
Backlight= Retroilluminazione
Certifikates= Certificati
Phone= Telefono
Connections= Connessioni
Map Settings= Impostazioni Mappa
Clock= Orologio
Beam= (changes as it is noun or verb)
Today= Oggi
Menus= Menu
Remove Programs= Rimuovi Programmi
Sounds & Notifications= Suoni e Notifiche
Input= Input
Memory= Memoria
Password= Password
Keys= Tasti
Touchscreen= Touchscreen
Info= Info
Search & Explore= Cerca & Esplora
System Tools= Tools di sistema
This Translated word will be useful for a translated ROM?
Is is already avalaible?
hi lumpistefan,
Here the translation in Dutch.
Gegevens eigenaar
Contactpersonen
GPRS-Authenticatie
Auto-Configuratie
Ringtone toevoegen
Apparaat-Informatie
Permanent opslaan
Energie
Microfoon
Backlight
Certificaten
Telefoon
Verbindingen
Folder instellingen
Tijd
Zenden
Vandaag
Menu's
Programma's verwijderen
Geluiden & Meldingen
Invoer
Geheugen
Wachtwoord
Toetsen
Touchscreen
Informatie
Zoek & Verkennen
Systeem Gereedschap
thanxxx for the effords

[FRENCH ROM] FT D.E. v1.1 [UPDATE 07/12/05]

I'm happy to present to French Prophet's users my new release :
French Touch Dual Edition v1.0 after betas it's now the release
Made on Prophet French TOUCH VII CE Light (based on Gullum VII & hma4 Crystal)
[more info : http://forum.xda-developers.com/showthread.php?t=330420&page=3 ] and added, many registrery changes, files update and a lot of new apps from the touch dual, totaly in french, the quicker ROM on your Prophet.
More details [in french only registrate] : http://xvx45betaprophet.xooit.fr
screenshots :
[del] download link : http://www.4shared.com/file/30070421/2f6da34e/FT__-__Dual_Edition__-__v1_0.… [/del]
EDIT : v1.1 released
Changelog :
- Bug correction + Windows soft added
- cab application pack
[Bug correction + Windows soft added]
- Correction of xt9 fromkeyboard + update version (no more problem with the P key "P")
- EndKey added
- New classification + icons for start menu.
- New CommManager (6buttons)
link :
http://www.4shared.com/file/31213484/d3a24fba/FTDE_11.html
Appication pack :
http://www.4shared.com/file/31213500/1dd46b9c/Pack-cab-FTDE11.html
like it themes.. can you post it themes too.. i can't french.. but I love to have it themes.. your design is rock man...
since this is based on gullum Vii, does it mean that gullum IX is better than this?
I understand french i dont mind flashing this.
Step 1 is the same too?
varanusvincent > all my theme are on http://www.nectun.com
elFahd > I can't said my ROM is worst or better like other ROM but different So I've integrate last versions of some HTC products, but my sys and xip are older, so no problem on it ROM and veryfast too.
I've optimised for French settings, MUI, registrery keys etc... and for the Web with Orange in France for having no modification to do to have internet TV.
For the step 1 you've just to use a WM5 NVID ROM.
looks very cool! The only thing is....I'm NOT french....what a pity!
But i wanted to know what launcher is this on the top of the today screen (above the HTC Today plugin)?
Thanks
The first plugin is HTC Home Sprint Plugin v1.0.824711.0 you can found it here : http://forum.xda-developers.com/showthread.php?t=344533
Your Rom is stable and a very good release. I think that in your futur Rom you should install QuickMenu. I tried it in the Crystal V4 of hma4 and it's very usefull.
Thanks for your work.
xvx45 said:
varanusvincent > all my theme are on http://www.nectun.com
elFahd > I can't said my ROM is worst or better like other ROM but different So I've integrate last versions of some HTC products, but my sys and xip are older, so no problem on it ROM and veryfast too.
I've optimised for French settings, MUI, registrery keys etc... and for the Web with Orange in France for having no modification to do to have internet TV.
For the step 1 you've just to use a WM5 NVID ROM.
Click to expand...
Click to collapse
thanks.. really appriciate it..
I've tried it today. work really great.. good job..
But since I don't know french, I flash again to Touch IX.
Good Job..
Like your design..
varanusvincent said:
I've tried it today. work really great.. good job..
But since I don't know french, I flash again to Touch IX.
Good Job..
Like your design..
Click to expand...
Click to collapse
Thanks for your test indeed your language
thanx brother for the nice work.
we are always waiting for more frensh release.
"encore une fois merci pour le super boulot"
xvx45 said:
Thanks for your test indeed your language
Click to expand...
Click to collapse
hehe.. I would like to learn french someday.. So I could use your ROM someday as my primary ROM.
report from my Test.. HTC Album works really great.. HTC Sprint too.. It fast and rock..
Good job man.
ohhhh
thank you so much !
varanusvincent said:
hehe.. I would like to learn french someday.. So I could use your ROM someday as my primary ROM.
report from my Test.. HTC Album works really great.. HTC Sprint too.. It fast and rock..
Good job man.
Click to expand...
Click to collapse
Really happy to learn it
Don't speak German at all, can't help you ^^ But Windows Mobile is Windows Mobile, WWE, French, German or anything else.
So, if you see any bugs report it, will be modified for next versions
xvx45 said:
Really happy to learn it
Don't speak German at all, can't help you ^^ But Windows Mobile is Windows Mobile, WWE, French, German or anything else.
So, if you see any bugs report it, will be modified for next versions
Click to expand...
Click to collapse
Okay.. I' ll report anybug if I found it.. But one for sure.. your design is really good.. Wondering if your design could be mix with gullum ideas... ( I mean his knowledge of ROM )
it would be good..
But one for sure.. streaming media is really good.
and I like your idea with HTC sprint..
wondering if you can make English version for your ROM..
varanusvincent said:
Okay.. I' ll report anybug if I found it.. But one for sure.. your design is really good.. Wondering if your design could be mix with gullum ideas... ( I mean his knowledge of ROM )
it would be good..
But one for sure.. streaming media is really good.
and I like your idea with HTC sprint..
wondering if you can make English version for your ROM..
Click to expand...
Click to collapse
Yeah if u can release an english version that would be gr8........
microsoft office mobile don't work, i have this message "impossible d'ouvrir le fichier il n'est pas signé demarrer car il est signé avec un certificat de confiance ...."
bikeko said:
microsoft office mobile don't work, i have this message "impossible d'ouvrir le fichier il n'est pas signé demarrer car il est signé avec un certificat de confiance ...."
Click to expand...
Click to collapse
My french isn't so good, but I think you run into a common problem related to not doing a proper HARD reset after flashing. Does your contacts behave strange too?
bikeko said:
microsoft office mobile don't work, i have this message "impossible d'ouvrir le fichier il n'est pas signé demarrer car il est signé avec un certificat de confiance ...."
Click to expand...
Click to collapse
just try to hard reset.. I don't have any problem with microsoft office.. have you done hard reset before?
bikeko said:
microsoft office mobile don't work, i have this message "impossible d'ouvrir le fichier il n'est pas signé demarrer car il est signé avec un certificat de confiance ...."
Click to expand...
Click to collapse
[ENGLISH]
- What is the extension of the file that you test to open ?
- Have you use my Extended_ROM ?
- Please transmit to me the file extended_state.log generate in the install folder of my ROM.
Thanks
[French]
- Quelle est l'extension du fichier que tu veux ouvrir ?
-As tu utilisé mon extended_ROM ?
- Envoie moi le fichier extended_state.log généré par mon installation dans le dossier où se trouvait celle-ci pour le flash.
Merci

Phantom ROM V1.0 (French ROM for NIKI)

Phantom ROM V1.1 (French ROM for NIKI)
It's my first ROM and it was a very hard work for me.
This ROM is based on the Bouygues Telecom ROM (Clean ROM)
OS 5.2.1622 (build 18129.0.4.5)
Changelog from BT ROM :
Add :
Cube 4 slides
Marshal Keyboard
MortPlayer
Notepad
PHM Registry Editor
WMA PhoneProfile
PocketCM
Pocket RAR
Slide 2 Unlock
SMSDRFix
TodayAgenda
Total Commander
WkTaskL
HHC
Quick Menu
Registery Tweaks :
Auto disconnect data connection
Incrasing AD2P bitrate
Disable certificat warning
Incrasing keyboard light time
Enable MicroSD PowerManagment
Enable Cache FS
Storage memory :
Total : 125,41Mb
Used : Mb
Free : Mb
Program memory :
Total : 101,42Mb
Used : Mb
Free : Mb
For TomTom User's :
Install TomTom Navigator on Storage Card (\Carte de Stockage\TomTom\tomtom navigator.exe)
TomTom on the 4th side of Cube launch a MortScript script \Windows\TTN6.mscr who :
-rotate the screen
-incrasing volume
-launch tomtom
ToDo for the next Release :
-Upgrade software
Thanks :
XDA for this forum
Please, don't ask me for another language for moment, I've lot of work for the next french release.
Only reply in english (with French translation if you want)
HTC NIKI Phantom French ROM V1.1
Yeah Man You have finish your hard work!!! Sorry but, I can't test, because I have sold my phone
Ok, I'm still waiting for SFR to unlock my phone so I can use it with my actual Bouygues SIM, but it should be done (finally) this week. And then I'll test your rom.
I find the installation instructions very complicated, and I'm not sure I did understand every step of the installation, so I'll resume :
1 - download sspl-1.16-nike.zip, unpack, remove sim and sd card form the niki, power it, connect usb, copy the executable on the phone, launch it from the phone, and a screen with 3 colors should appear, disconnect and reconnect the usb cable.
2 - download the flash-hardspl-niki.zip, unpack it, and launch the romupdateutility.exe, follow the steps.
3 - Power off the phone, power on again, launch sspl, wait for the 3 colors to appear, disconnect and reconnect the usb cable, launch the CustomRUU.exe from your archive, follow the steps et hop c'est la victoire ?
Or maybe this is all wrong, so please correct me, I didn't find a clear tutorial on this subject. Or at least not clear for me.
Anyway, have a nice day !
No, it's not so complicated :
- download everything you'll need : sspl, hardspl and your favorite ROM (or anything you want to flash on your Niki).
- be sure of your battery level, don't forget flashing is dangerous if it's stopped before being finished
- then follow the steps they quoted : remove SD and SIM card, connect your device via USB, copy the sspl EXE on it and run it from the NIKI : then "USB" should appear on your Touch Dual.
- unplug and replug the cable, if I well remember, it will install some drivers under Windows but shouldn't be a problem (even if I ran it from Vista ).
- finally, run the ROMUpdateUtility from the hardspl archive (after having extracted it !).
Once you've done it, you'll just have to plug your Dual via USB when you'll want to flash a new ROM via its ROMUpdateUtility (I only know hardspl, I never tried uspl, sorry...). No need to re-execute sspl (what I thought first time I flashed)...
And you don't have to wait for SFR to unlock your Niki : there's a difference between SIM Unlock (what you want SFR to do I think) and CID unlock (what I describe here, that allow you to change your ROM (but not your SIM card))
PS : Sorry for my english...
1 - Remove SIM card and Micro SD card
2 - Boot Windows on your Phone
3 - Connect USB cable
4 - Via activesync, copy and launch sspl-1.16-nike.exe on your phone (sspl-1.16-nike.zip)
5 - Your phone will boot on the SPL (3 color)
6 - Wait for USB appear at the bottom of your screen
7 - Disconnect and reconnect USB and wait USB appear
8 - Download flash-hardspl-niki.zip and launch ROMUpdateUtility.exe
Congratulation, your phone have hardSPL installed
Your can download and install all rom (for niki) you want.
Just download a ROM and launch CustomRUU.exe or ROMUpdateUtility.exe with your phone connected.
HardSPL is permanent, you don't have to re-install HardSPL when you want to flash your phone the next time.
Ok, thank you guys !
The fact that I wait for my phone to be sim unlocked is because otherwise I don't have any utility of it.
I have recieved 15 htc dual for my enterprise, but they are SFR locked, and we'll recieve the sim cards in april. So in the meantime I did ask to have 3 of them unlocked so I could use it with my bouygues sim.
/mylife
I've found a bug (see the original post at the bottom)
Hello, I've tested your ROM for just 1 hour now.
my 2 cents :
The splash screen is too long to load, and I don't know how to deactivate it.
The icons of the fourth side of the cube aren't really nice, imho.
There's a bug in the contacts, when I search. It's a bit complicated, so I'll explain it in french :
Lorsque l'on tape une lettre pour accéder à un contact, il ne prend que la première. Si je veux aller à la lettre "p", je tape 2 fois sur la touche o/p, et il prend "oo" au lieu de "p". si j'appuie sur del pour effacer, la première lettre reste toujours sélectionnée.
Bon, c'est pas très clair, mais je me comprend.
Otherwise, I didn't see any problems and I like the way everything is organised, so thanks to you !
I'll make more comments after I've used it for a while.
The splash during... 4 sec, and you don't reboot every days, and you can't deactivate it.
The icons on the 4th side of cube are too big, and not very well, but I'm not a artist.
I'm working on a little application for users to customize icons and program to appear in launcher.
For the contact bug, I'll suppress ContactCM in 1.2 release.
For the 1.2 I'll :
suppress : ContactCM, WMA PhoneProfile, WkTaskL
add : script to launch MortPlayer (activate BT, increase volume... and deactivate BT to exit and restore volume setting)
modify : restore volume setting after exit tomtom
...
Perhaps I'll make possibility to deactivate animated splash.
But, I'm not sure I'll release my future ROM here, because I've not enough comments for progress. I've post my ROM on a french forum, and have a higher audience.
May you give the URL of the french forum you're talking about ?
I'll keep coming on XDA for fresh news about Wifi, GPS or display drivers, but talking about Niki in french would be interesting (and much easier...).
PS : I'll try your ROM soon, at the moment the "original" Bouygues's one suits me since it's my first PDA, I had SFR's one on it before (no comparaison between them...) and I'm still learning
Keep on working on your ROM
I'm not sure moderator accept a link to another forum, but you can search "niki phantom rom" in google.
Thank you very much
hi,
thank you for this ROM, good job.
@+
just a little question: sfr illymitics parameters are inside (sorry for my bad english)??
No SFR illymitics parameters in this ROM.
There is no provider packages in this ROM.
My question is not exactly about the Phantom ROM, but do anybody know a tool which might automatically delete packages from extracted a ROM extracted with the kitchen ? In the Kaiser wiki I've seen some interesting screenshots about it, but there's no such thing in any of the 2 kitchen... And I can't find anything using the Search...
I would be happy not having to remove then manually (I'm lazy...).
Thanks for your help
@Sterbaya : still waiting for you're 1.2 release
comment after test it
very good french rom, it the thread rom tested pon my niki. it work very well.
the slide to unlock is very usefull.
Mortscript and phm regedit are usefull too.
you can do few following improvement on your rom.
- the 4th side of the cube isn't easy to customize without play with the registry. a simple interface will be wellcome.
- PocketCM, is complet, customisable, very funny but, it freeze sometime when you sliding over more than 300 contacts like me.
- activsynch is frozing the system during a synchronisation (i feel is using so much cpu)
- may you can integarte alt-tab or equivalent allowing to switch between application loaded on the memry without close it.
Super ROm, c'est la troiseme que j'essai sur mon dual touch. elle marche tres bien. le slide unlock est super pratique. Mortscript et PHM regedit le sont aussi.
tu peux encore appoter quelques amelioration:
- la quatieme face du cube n'est pas facilement configuration sans jouer avec la registry. un interface graphic serait le bien venu.
- Pocket est complet, configurable, genial mais il se fige un peu lorsque l'on glisse pour cherche parmis plus de 300 contacts
- activsyn se fige uassi pendant les synchronisation ( trop consomateur de CPU je pense)
- tu pourrais integre Alt-tab ou un equivalent permettant de switcher d'une application a l'autre sans les fermer.
j'aurais plaisir a test vos futurs optimisation.
Tu devrais aller voir ma dernière ROM sur win-mobile, elle prend déjà en compte toutes tes remarques :
-Outil intégré pour une configuration de la 4ième face (tuto sur le site web en question)
-PocketCM viré
-Pour switcher entre les application, j'ai mis en place QuickMenu
Par contre, cela fait longtemps que je ne l'ai pas mis à jour (WM6.1 par exemple) et je n'ai pas le temps de m'en occuper dans les prochaines semaines.
You can go on win-mobile website for find the phantom 1.2 with many fix you say :
-A soft for configure the 4th side of cube
-PocketCM removed
-QuickMenu for switch between softs
For moment, I haven't the time to update this ROM.
does it comes with english too? or just french?

[Q] How to play with Samsung Galaxy S2 with wiimote on TV ?

Edit : for the solution to play Galaxy S2 with wiimote on your TV... go here => http://forum.xda-developers.com/showpost.php?p=25693147&postcount=10
Hi Everyone,
I have a problem (solved => read the next posts to find the solution to this problem)...
I search everywhere on google and i did not find the solution :'(
In fact, i have a Samsung galaxy S2 and i want to play N64 emulator on my TV with wiimotes...
NB: I have the "MHL cable" and "wiimotes" (but no PS3 controller, so please don't answer "use PS3 controller" ^^).
Rom Gingerbread:
I used stock rom Gingerbread (MHL worked but wiimote pair did not).
I used MIUI 2.3.7 (MHL did not work but Wiimotes worked)....-__-"
Ice cream sandwich:
I used ICS MIUI / Stock rom (4.0.3) / or Cyanogen => (Wiimotes pair did not work for all [but MHL worked only on stock rom])
On ice cream sandwich i said "wimotes pair did not work" but the real problem is that my SGSII ask me for a pairing code and that it's not possible to put no pairing code...:/
So, I tried 0000, 1234... I tried the Mac adress of my wiimote, the reverse Mac adress of my wiimote... ><'
So pleaseeeee help me
PS: I'm so sorry for my english :s
PS 2: I tried Bluez IME, wiimote controller...
darki00 said:
Hi Everyone,
I have a problem... I search everywhere on google and i did not find the solution :'(
In fact, i have a Samsung galaxy S2 and i want to play N64 emulator on my TV with wiimotes...
NB: I have the "MHL cable" and "wiimotes" (but no PS3 controller, so please don't answer "use PS3 controller" ^^).
Rom Gingerbread:
I used stock rom Gingerbread (MHL worked but wiimote pair did not).
I used MIUI 2.3.7 (MHL did not work but Wiimotes worked)....-__-"
Ice cream sandwich:
I used ICS MIUI / Stock rom (4.0.3) / or Cyanogen => (Wiimotes pair did not work for all [but MHL worked only on stock rom])
On ice cream sandwich i said "wimotes pair did not work" but the real problem is that my SGSII ask me for a pairing code and that it's not possible to put no pairing code...:/
So, I tried 0000, 1234... I tried the Mac adress of my wiimote, the reverse Mac adress of my wiimote... ><'
So pleaseeeee help me
PS: I'm so sorry for my english :s
Click to expand...
Click to collapse
As of right now, you are out of luck as far as WiiMotes go.
Any GT-I9100 ROM that WiiMotes currently work with, don't support TV-Out (CM7 and Gingerbread versions of MIUI), and ALL ROMs so far that support TV-Out will not pair with WiiMotes, or will ask for a PIN, as you have already discovered.
So, there is no possibility to play on TV with wiimotes ??? :'(
No Patch or something like that ??
And, why wiimotes works on MIUI 2.3.7 but not MIUI ICS (it's ask for pairing code)... it's so strange :s
darki00 said:
So, there is no possibility to play on TV with wiimotes ??? :'(
No Patch or something like that ??
Click to expand...
Click to collapse
When I google "i9100 wiimote mhl", all I are results saying it doesn't currently work. Maybe you'll get different results?
darki00 said:
And, why wiimotes works on MIUI 2.3.7 but not MIUI ICS (it's ask for pairing code)... it's so strange :s
Click to expand...
Click to collapse
Perhaps they changed bluetooth stacks.
ctomgee said:
As of right now, you are out of luck as far as WiiMotes go.
Any GT-I9100 ROM that WiiMotes currently work with, don't support TV-Out (CM7 and Gingerbread versions of MIUI), and ALL ROMs so far that support TV-Out will not pair with WiiMotes, or will ask for a PIN, as you have already discovered.
Click to expand...
Click to collapse
What a bummer, catch 22
Sent from my GT-I9100 using XDA
Wezi said:
What a bummer, catch 22
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Yup. I'm glad SixAxis works.
...
I found a solution
MHL + Bluetooth wiimote works on this leaked Stock Rom :
I9100XXKP1
(A leaked 4.0.1 Rom)
I played Mario kart 64 on my TV with 4 wiimotes and it worked with no sound
(if i put "ON" the sound, it freezed )
Problem... this rom had bugs and i tried dual boot but the "Siyah" kernel does not work with this rom :/
Edit: The rom I9100XXLP1 seems to be better (less bugs) (it's a 4.0.3 Stock Rom). I tried Bluetooth wiimotes and it works [i did not try MHL but i think it will work too ]
Edit 2: Finally, i tried the last leaked Rom I9100XXLPJ and it works too
>Mhl Works
> System is not instable
> Wiimotes work (sometimes, when i'm pairing Wiimotes it asks me for a pairing code :/ but when i reboot the phone and retry to pairing wiimotes... it finally works without asking me )
> Emulators with sounds works
Conclusion:
The best Rom seems to be the Leaked Stock Rom I9100XXLPJ because the system is not instable (GPS/Wifi/3G etc... all works) and i can play on my TV with 4 wiimotes (Ex: I used Bluez IME + N64oid and i played "Mario kart 64" and "Goldeneye 64" with 3 other persons)
Edit 3: The first time that you pairing your wiimote, you need to press the red button of the wiimote (next to the batteries). After, you will just need to press 1+2. If the first time you not press the red button,then the device will ask you for a pairing code
Edit 4: For the Last (and the best) Leaked Stock Rom i tried (I9100XXLPJ), I give the link where i downloaded this rom: Download here
darki00 said:
Edit 4: For the Last (and the best) Leaked Stock Rom i tried (I9100XXLPJ), I give the link where i downloaded this rom
Click to expand...
Click to collapse
Ok, so first I must root my galaxys2, then install I9100XXLPJ Rom and then I can sync the wiimotes with wiimotecontroller app?
hellblazer11 said:
Ok, so first I must root my galaxys2, then install I9100XXLPJ Rom and then I can sync the wiimotes with wiimotecontroller app?
Click to expand...
Click to collapse
Edit 1: Wiimote + S2 on TV works for XXLPJ... but it works with the ROM XXLJS (4.1.2 leak => it's the first samsung jelly bean rom on S2)
First you download the ROM I9100XXLPJ and later you root (use CF-Root-SGS2_XX_OXA_LPJ-v5.3-CWM5.zip to root your SGS2). Then you install Bluez IME and BluezIME-HIDEnabler.apk ("wiimotecontroller" app seems to not work but it is not a problem because Bluez IME is better) and your emulator (ex : Gensoid ; or others emulators).
1) If you want to play with N64oid emulator:
a)Launch a game in N64oid (but do not launch bluez IME).
b)Go to "settings", then "input settings" and "bluetooth gamepads".
c)Choose "Controller 1".
d)Choose the "device driver" (it is "Wiimote (some firmwares)"), then touch "select device" and "scan" (accept when your phone asks you to activate bluetooth). At that time, press 1 second (or more if you want, it's the same) the red button next to the batteries of the wiimote and choose the wiimote in the "found devices".
e)Finally check the box "Connect" and wait. If the synchronisation worked, the phone will not ask for a pairing code and "Key Mappings" will be written in white.
If "Key mappings" works, you can change the buttons you want to play.
NB: If you want to play with two, three or four wiimote, you had to redo a) and b) but for c) you had to choose "controller 2", "controller 3" or "controller 4". Then it will be the same for d) and e).
2) If you launch another emulator (like gensoid).
a) Launch the emulator. Go in settings and then other settings and check the box "use input method".
b) Launch Bluez IME. Touch "Set number controllers" and choose "4 active controllers" (to play with 4 wiimotes). Uncheck "activate bluetooth" if it's check.
c) Choose "Select device #1" and scan. It will ask you for activate bluetooth, say "yes". At that time, press 1 second (or more if you want, it's the same) the red button next to the batteries of the wiimote and choose the wiimote in the "found devices". In "Select device driver #1" choose "Wiimote (some firmwares).
d1) Go to "Select IME", choose "Bluez IME" (not "samsung Keyboard") and in the same time :
d2) hit the button 1 and the button 2 of your wiimote.
e) If it works, it will not ask you for a pairing code and the light on the wiimote will remain blue.
f) Go to "configure buttons for device" and choose any keys (it does not matter because the real configuration of the keys will be in the emulator).
g) If you want to play with 2/3 or 4 wiimotes, you have to redo for each controller : c) d2) and e)
Nb: If you play with 2/3/4 controllers, choose random keys in "configure buttons for device" (Caution !! you must not have a common key between each player)
h) Configure your emulator. For Gensoid you had to go in "Settings" and "input setings", "keys mappings". Then touch on the screen of your phone "Up" and touch the button on your wiimote you want for "up" in your game. Then do the same for "Down", "Left", "Right", "Start, "Button A", "Button B", "Button C".
i) If you want to play with two players down at the bottom of the screen and choose "Key Mappings" in "Pad 2". Then, configure the Keys as you want with the Wiimote 2
Nb: With Gensoid, you can't play with 3 or 4 wiimotes.
3) If you want to play with Mame emulator (I use MAME4droid Reloaded because it seems to be the best Mame emulator)
a) You had to do : 2b)c)d)e)f)g)
b) Configure your emulator : In the emulator, go to "options". Then "Settings" and to finish go to "Define keys". In "Define keys", configure your controllers.
c) Now, you can play with your wiimote
PS: If you don't know how to have a game in an emulator or how launch a game in an emulator, google is your friend
PS2: I hope my post will help some readers . If you have any question... do not hesitate
PS3: If Bluez IME does not have the option "Wiimote", it's because you did not install this :
BluezIME-HIDEnabler.apk
Hello,
I had the same problem on GGB Stock Samsung ROM, and currently same PIN code issue on CM9 nightlies...
I posted the issue in the CM9 discussion thread, but had no clear answer on what was responsible for this.
Do you think it comes from the ROM or from the kernel ? Flashing Siyah would change anything ?
chtitlou said:
Hello,
I had the same problem on GGB Stock Samsung ROM, and currently same PIN code issue on CM9 nightlies...
I posted the issue in the CM9 discussion thread, but had no clear answer on what was responsible for this.
Do you think it comes from the ROM or from the kernel ? Flashing Siyah would change anything ?
Click to expand...
Click to collapse
Like I said before, it does not work on stock rom gingerbread. And it does not work on ICS (just work on the ICS leaked Rom).
Je vais te le dire en Français car tu sembles en être un aussi .
Comme je l'ai déjà dis, la synchronisation des Wiimotes est impossible avec les Roms Samsung Gingerbread (mais la synchronisation des Wiimotes est possible avec CM7 ou MIUI Gingerbread).
Pour ICS, la synchronisation est impossible que ce soit pour les Rom samsung, CM9 ou MIUI. Les seules Roms ICS dont la synchronisation des Wiimotes est possible sont les Roms samsung Leakés (j'ai donné un lien de téléchargement précédemment).
Donc cela ne vient pas du Kernel mais de la ROM. J'ai essayé le Kernel Siyah sur une Rom ICS normale (non leakée) et cela n'a pas fonctionné.
Précision : sur les Roms leakés, le Siyah Kernel est incompatible (si on le flash ça empêche de démarrer le téléphone et on est alors obligé de passer en mode download et de reflasher un autre kernel).
Pour jouer avec une wiimote et garder une Rom Samsung tu as deux solutions:
1) Utiliser "Lolboot" qui permet le dualboot de Rom Gingerbread. Là tu installes une Rom samsung pour l'utilisation de tous les jours + une autre Rom (MIUI ou CM7) afin de jouer avec tes wiimotes [Mais par contre le branchement HDMI est non fonctionnel sur les ROMs CM7 et MIUI donc tu ne pourras pas jouer sur ta TV).
2) Télécharger et installer une Rom ICS Leakée. Tu as l'avantage d'avoir une stock Rom (qui est vraiment stable et fonctionnelle) + l'avantage de pouvoir jouer avec tes wiimotes et ton SGSII sur ta Télé)
PS: Il n'existe à ma connaissance aucune solution permettant d'utiliser le kernel Siyah et des Wiimotes en même temps (qu'elle que soit la ROM).
It works. thanks a lot! youtube.com/watch?v=-r6rrvCV0Xc
Hey,
I got some news about these pairing issues. I finally managed to remove this annoying PIN code pop-up on CM9.
I have been testing with automatic detection and with manual connection (in settings, by entering the MAC address of the wiimote) on CM9 stock and it didn't work first. Then I tried with Siyah kernel, and after installation, the pop-up disappeared and I could play with the wiimote. However, if I remove manual connection and set it back to discovery mode, the problem comes back.
So for those using CM9, install Siyah (v3.2b6 worked for me) and fill the wiimote address (that you can find using Bluetooth Address Finder on the market) in the manual connection settings.
Pour répondre à mon copain français ,
Merci de ton aide. J'avais envie de rester sur CM9 car même peu avancée, celle-ci me plait beaucoup. On m'avait dit sur le thread de discussion CM9 que ce n'était pas un problème de ROM, mais je n'y croyais que peu...
A tout hasard, j'ai essayé le kernel Siyah... et ca a marché immédiatement ! Chance ! Il semblerait donc finalement que le kernel ait un effet, je ne sais pas lequel, en plus de la ROM. Mais en tout cas aucune chance de le faire avec la découverte de périphériques bluetooth, il faut l'adresse MAC à tout prix quand même. Ca ne me parait pas clair à identifier, il serait en effet idéal d'avoir une ROM qui ne pose aucun problème du tout !
Maintenant, la TV-out n'est pas encore dispo sur CM9, ce n'est donc pas dans ton intérêt. Cependant ca ne va pas tarder non plus...
A bientôt!
darki00 you are the man! Exellent post.
I'll try as soon as possible... but I have 1 more question: did you try with MAME4DROID? Can you post the settings? THANKS!
DarkHorse said:
darki00 you are the man! Exellent post.
I'll try as soon as possible... but I have 1 more question: did you try with MAME4DROID? Can you post the settings? THANKS!
Click to expand...
Click to collapse
It's not difficult for Mame
I post the settings in my precedents message
darki00 said:
snip
Click to expand...
Click to collapse
Thanks so much for that darki00! I had been stuffing around with this for days before i came across your post, and following the instructions worked perfectly!
Now i've just got to weigh up the pro's and cons of having to use a stock rom vs being able to play snes and N64 again!
Thanks again,
xzion
xzion said:
Thanks so much for that darki00! I had been stuffing around with this for days before i came across your post, and following the instructions worked perfectly!
Now i've just got to weigh up the pro's and cons of having to use a stock rom vs being able to play snes and N64 again!
Thanks again,
xzion
Click to expand...
Click to collapse
Your welcome =)
I'm Happy to see i gave helpful explications for some people =) (because the problem is that I don't speak english very well... :/)
For you, a stockrom is a disadvantage ?? Because, in my opinion, Stock roms are better than CM9 or MIUI because Stock Roms are less instable and more beautiful (but it is just my opinion ^^)
Last news,
Wiimote Controller is now definitely compatible with last CM9 roms, even with stock kernel. Remaining TV-out to solve, big issue apparently...
About stock roms, I agree they are more stable than other AOSP as CM or MIUI. But I am quite impressed by the stability and performances of CM9. Even if a lot of extra features are still missing, I cannot move back to stock ICS Samsung roms that, in my opinion, under-exploit the phone (as a consequence of a high stability) and lack of settings... But as you say, this is my opinion !
well now i've got the best of both worlds thanks to chtitlou!
successfully running CM9 nightly + Siyahkernel with the WiimoteController app working. Here's how i did it:
1. Go to the CM9 thread, grab the resurrection rom, the latest gapps and the latest nightly build.
2. Go grab the latest SiyahKernel.
3. Put the siyah, gapps and nightly build zip's in your phone storage.
4. Jump into download mode, and flash the resurrection build using ODIN.
5. When it's done it should leave the phone in recovery. Flash the gapps zip.
6. Reboot to system and let it all load up. Make sure everything's ok.
7. Reboot into recovery.
8. Flash the CM9 nightly build zip.
9. Reboot to system. now running the latest CM9!
10. Reboot to recovery.
11. Flash siyahkernel zip.
12. Reboot to system.
13. I had a problem here after i flashed siyahkernel where it wasn't mounting the internal storage to /sdcard. if you have this problem, just go to settings->storage, bring up context menu and go into configuration. should be able to change the setting there, then reboot.
14. Grab wiimotecontroller.
15. Go into preferences->connection settings->manual discovery. enter the mac address of your wiimote(s). (you can find this using the app chtitlou recommended if you don't already know it)
16. Press Init and Connect. A popup will appear. hold down 1 and 2 on your wiimote, then press yes.
17. SUCCESS. you should connect and see button presses!
18. Download snesdroid, grab the MegaMan X rom, change the input settings and relive your childhood!
Hope this helps!
EDIT: silly me, i actually didn't try it using the stock kernel, just assumed it wouldn't work! I'll flash the nightly build and see how it goes. wonder if it will work with slimics?
EDIT2: yep, works with the stock CM9 kernel! Skip steps 10->13!

LG G5 H820 Upgrade to Android 7.0 without active ATT SIM Card ?

Please help us. H820 users outside the United States. We can't update android 7.0.
I have read the updated tutorial article for g4-h810. Can I do the same thing with g5-h820?
Somebody help us! Please:crying:
My phone is H820, with H82010C version
I will be happy to support someone who can help me and others update my phone to 7.0, If somebody can help, please let me know your paypal
I have the same problem. until now, don't we have a solution!?
Nougat for the H820
LG has posted a Nougat ROM for the H820PR, which can be found at the following link: https://lg-firmwares.com/lg-h820pr-firmwares/ It seems to be geographically limited to LG's CAP region (Mid/South America PR/Puerto Rico Central and South America), so you'll have to determine if it will work with your G5. If you want to roll the dice, just flash H820PR20a_00_1123.kdz with LGUP.
Any luck trying this??
android 7.0 lg h820 att
le moyen est simple
telecharge lgup-uppercut pack sur le web
ensuite telecharge le putain de apk special h820 , je l'ai trouve apres 1 semaine de recherche
cependant , c'est un rom de l'operateur Claro !!! mais ca fonctionne !
donc apk cherche sur le web : '' H820PR20a_00_1123.kdz'' 2.1 go
ensuite enlève la sd et la simcard de ton tel, éteind le tel
apres avoir installer uppercut , lance le .
apres
tu appui sur le volume + du tel et tout en restant appuyer tu branche usb au pc
le telephone va ce metre en sofware update et uppercut va le reconnaître , ensuite tu vas dans uppercur>>upgrade , choisi le fichier apk h820pr20a et c'est parti !!!
Did anyone of you guys upgraded ???
nicolasessonnes said:
le moyen est simple
telecharge lgup-uppercut pack sur le web
ensuite telecharge le putain de apk special h820 , je l'ai trouve apres 1 semaine de recherche
cependant , c'est un rom de l'operateur Claro !!! mais ca fonctionne !
donc apk cherche sur le web : '' H820PR20a_00_1123.kdz'' 2.1 go
ensuite enlève la sd et la simcard de ton tel, éteind le tel
apres avoir installer uppercut , lance le .
apres
tu appui sur le volume + du tel et tout en restant appuyer tu branche usb au pc
le telephone va ce metre en sofware update et uppercut va le reconnaître , ensuite tu vas dans uppercur>>upgrade , choisi le fichier apk h820pr20a et c'est parti !!!
Click to expand...
Click to collapse
english please
Any updates on this, I bricked my phone with that PR update, now its stucked on firmware update
Pleas help me how to update my lg g5 h82010c android 7
I ordered a ATT Prepaid Sim, cost $1.05.. the representative told me I should be able to update my H820. I know the subject is without ATT SIM, otherwise.
Thank you.
Christopher HOW TO for LG G5 translated from FRENCH to ENGLISH
Christopher Xi posted a comment in french ... about a way to root LG G5 H820 (the infamous AT&T version)
I have one ... LG G5 at&t version (second hand, bought in US thanks to Ebay and used in Switzerland)
So after a few months of nice usage without root, i'm still looking for a way to rooting this nice phone and get "admin power".
Since I read french (my mother tongue), English, Italian, etc. ... , here's the translation of Christopher Xi message (for those of you who don't read french and who don't use the most intelligent translator in the world : DeepL
Beware :
I don't trust Christopher Xi "tutorial" (too many infos missing in the tutorial on succesfully rooting this "patikular" version ).
So use the info at your own risks.
As users abroad (and not all mexicans) know TOO well, they are not allowed to make updates and still less root their LG G5 H820 ... 'cos at&t doesn't allow rooting ... or updates outside from US ...
I know, the CEO of at&t must be a close friend of Trumpy ... thinking that if you buy a phone in the great America AGAIN, you shoul live there and nowhere else ... (i'm joking).
Nice thing, isn't it ?
Dont put the blame on me for Christopher Xi' s TUTORIAL... I just translated HIS "easy minding and way to root an lg g5 with at&t " for people who don't speak french !
If I were you ... I would'n't try Christopher Xi solution ... too many infos lacking ...
NOW ... tadam ... the translation of Christopher Xi (as promised) :
the way is simple
download lgup-uppercut pack on the web
then download the ****ing apk special h820, I found it after 1 week of searching
however, it's a Claro operator's rom !!! but it works !
so apk searches the web: '' H820PR20a_00_1123.kdz'' 2.1 go
then remove the sd and simcard from the phone , turn the phone off
after installing uppercut, starts the.
after
you press on the volume + of the tel and while remaining press you plug usb to the pc
the phone will put itsel in sofware update and uppercut will recognize it, then you go in uppercur>>upgrade, choose the file apk h820pr20a and let's go!!!
nicolasessonnes said:
le moyen est simple
telecharge lgup-uppercut pack sur le web
ensuite telecharge le putain de apk special h820 , je l'ai trouve apres 1 semaine de recherche
cependant , c'est un rom de l'operateur Claro !!! mais ca fonctionne !
donc apk cherche sur le web : '' H820PR20a_00_1123.kdz'' 2.1 go
ensuite enlève la sd et la simcard de ton tel, éteind le tel
apres avoir installer uppercut , lance le .
apres
tu appui sur le volume + du tel et tout en restant appuyer tu branche usb au pc
le telephone va ce metre en sofware update et uppercut va le reconnaître , ensuite tu vas dans uppercur>>upgrade , choisi le fichier apk h820pr20a et c'est parti !!!
Click to expand...
Click to collapse
In my opinion, Christopher Xi needs to go back to school !
He or she seems stuck in POV ... just like a teenager
Sorry, if you feel insulted, but either you give details and infs on a new and rooting way, or you shut your ****ing mouth !
Egocentric at best !
Guys, I've bricked my phone with that pr version, cant get it to work again, I bought the same model (I have two now), maybe I find a way to get the rom from my new device into the bricked one, but the bricked one its not being recognized by my computer, so, not much hope.
Dont try this.
xabzzz said:
Christopher Xi posted a comment in french ... about a way to root LG G5 H820 (the infamous AT&T version)
I have one ... LG G5 at&t version (second hand, bought in US thanks to Ebay and used in Switzerland)
So after a few months of nice usage without root, i'm still looking for a way to rooting this nice phone and get "admin power".
Since I read french (my mother tongue), English, Italian, etc. ... , here's the translation of Christopher Xi message (for those of you who don't read french and who don't use the most intelligent translator in the world : DeepL
Beware :
I don't trust Christopher Xi "tutorial" (too many infos missing in the tutorial on succesfully rooting this "patikular" version ).
So use the info at your own risks.
As users abroad (and not all mexicans) know TOO well, they are not allowed to make updates and still less root their LG G5 H820 ... 'cos at&t doesn't allow rooting ... or updates outside from US ...
I know, the CEO of at&t must be a close friend of Trumpy ... thinking that if you buy a phone in the great America AGAIN, you shoul live there and nowhere else ... (i'm joking).
Nice thing, isn't it ?
Dont put the blame on me for Christopher Xi' s TUTORIAL... I just translated HIS "easy minding and way to root an lg g5 with at&t " for people who don't speak french !
If I were you ... I would'n't try Christopher Xi solution ... too many infos lacking ...
NOW ... tadam ... the translation of Christopher Xi (as promised) :
the way is simple
download lgup-uppercut pack on the web
then download the ****ing apk special h820, I found it after 1 week of searching
however, it's a Claro operator's rom !!! but it works !
so apk searches the web: '' H820PR20a_00_1123.kdz'' 2.1 go
then remove the sd and simcard from the phone , turn the phone off
after installing uppercut, starts the.
after
you press on the volume + of the tel and while remaining press you plug usb to the pc
the phone will put itsel in sofware update and uppercut will recognize it, then you go in uppercur>>upgrade, choose the file apk h820pr20a and let's go!!!
In my opinion, Christopher Xi needs to go back to school !
He or she seems stuck in POV ... just like a teenager
Sorry, if you feel insulted, but either you give details and infs on a new and rooting way, or you shut your ****ing mouth !
Egocentric at best !
Click to expand...
Click to collapse
H820 upgrade
I have just updated 2 H820s to Oreo. I am in Canada and had ordered a SIM on ebay, activated and voila. Do not try any other methods, it will not work. Make sure no system apps are disabled and data roaming is enabled. I've said in another post, I do not know if this works outside of Canada or Mexico as I've picked a plan that includes roaming to CA and MX. Get your SIM cards from ebay and try, they are really cheap.
rothas said:
I have just updated 2 H820s to Oreo. I am in Canada and had ordered a SIM on ebay, activated and voila. Do not try any other methods, it will not work. Make sure no system apps are disabled and data roaming is enabled. I've said in another post, I do not know if this works outside of Canada or Mexico as I've picked a plan that includes roaming to CA and MX. Get your SIM cards from ebay and try, they are really cheap.
Click to expand...
Click to collapse
greetings ROTHAS,
would you please help me bro?
Is by sending me an activated at&t sim card i can so do the update of my H820s? i will send you the cost of it, if it will help me with the update .
am in indonesia, actually i just bought an at&t sim card but no luck with the service at&t might provided in here.
many thanks
rothas said:
I have just updated 2 H820s to Oreo. I am in Canada and had ordered a SIM on ebay, activated and voila. Do not try any other methods, it will not work. Make sure no system apps are disabled and data roaming is enabled. I've said in another post, I do not know if this works outside of Canada or Mexico as I've picked a plan that includes roaming to CA and MX. Get your SIM cards from ebay and try, they are really cheap.
Click to expand...
Click to collapse
Hey dude! Can I order a unactivated sim from US and activate it in germany to update ? or do I need an activated sim to do it?
EDIT: Just found out that you need an Activated sim card with INTERNATIONAL PLAN to use it outside of US, Canada and Mexico. So your best bet would be to find an At&T Sim card with international plan on it already to try and get the new update.
I honestly do not know, the cards are cheap so it's worth a try. As I said in my post, it works in Canada.
If you want to update your lg g5 h820 at&t, then write me a viber or telegram (+380960823422). I will help you do this by FOTA.
Instagram @olehoz :victory:
olehoz said:
If you want to update your lg g5 h820 at&t, then write me a viber or telegram (+380960823422). I will help you do this by FOTA.
Instagram @olehoz :victory:
Click to expand...
Click to collapse
I can confirm his method 100% worked for me. Big thanks to him
Why dont you share his method with us

Categories

Resources