S3 Doesn't boot - Galaxy S III Q&A, Help & Troubleshooting

Hello. I had a custom rom in my s3, I tried to flash to recovery mode but now when I think again I may not have had clocworkmod installed. Or is it a part of a custom rom automatically? Anyway my s3 didn't go to recovery mode and after that it wouldn't boot at all. I could get it to download mode so I flashed the stock firmware with odin but that didn't help. It still won't boot and only thing I can do is to get it to download mode. When I try to start my phone, the samsung logo appears as well as the startup-tune there is the blue notification light too, but that's all I can get.
So is there anything to fix my phone?

Alright, if you know how to properly use Odin, then follow these instructions.
http://forum.xda-developers.com/showthread.php?t=1695238&highlight=pit
If you are even 1% unsure of what you are doing with Odin, then follow this great guide as well
http://forum.xda-developers.com/showthread.php?t=1671969
what's happened to you also happened to me because I didn't have CWM installed. The ROM you're going to flash in the first link that I gave you comes CWM but I believe that it is an older version, so you're going to have to get into the Play Store and download the latest version once you install this.
Let me know how it goes.

Bodoma said:
Alright, if you know how to properly use Odin, then follow these instructions.
http://forum.xda-developers.com/showthread.php?t=1695238&highlight=pit
If you are even 1% unsure of what you are doing with Odin, then follow this great guide as well
http://forum.xda-developers.com/showthread.php?t=1671969
what's happened to you also happened to me because I didn't have CWM installed. The ROM you're going to flash in the first link that I gave you comes CWM but I believe that it is an older version, so you're going to have to get into the Play Store and download the latest version once you install this.
Let me know how it goes.
Click to expand...
Click to collapse
Thanks for fast reply! I got it working again!

No worries bud. Glad it's working. ^^ You got it working yourself or by following my directions?

Little both. I knew where the problem was but I just didn't know how to fix it

Related

[Q] HELP! Tried to root my note and I'm stuck on the battery screen

I have the Korean SK Samsung Galaxy Note. I tried to root it tonight using the galaxy note II dev kit (was that my first mistake?) I picked the model number closest to mine and did everything as recommended. I got up to the Odin tool and followed those directions to a tee, but after that it just got stuck on the Samsung logo and wouldn't go anywhere after I closed the Odin tool.
I got the bright idea to hold the power button and the top volume buttton to hard reset. Now it is stuck on a drained battery screen with the loading logo just frozen in the middle of it.
Help?
activepassive said:
I have the Korean SK Samsung Galaxy Note. I tried to root it tonight using the galaxy note II dev kit (was that my first mistake?) I picked the model number closest to mine and did everything as recommended. I got up to the Odin tool and followed those directions to a tee, but after that it just got stuck on the Samsung logo and wouldn't go anywhere after I closed the Odin tool.
I got the bright idea to hold the power button and the top volume buttton to hard reset. Now it is stuck on a drained battery screen with the loading logo just frozen in the middle of it.
Help?
Click to expand...
Click to collapse
what happens when you pull battery?
can you get download mode?
ALWAYS check your "Super Everything Thread".... it's in the General Forum. post#3 deals with Korean model
flashing wrong firmware usually results in brick. if you can get download mode, from what I understand, your OK.
go to super everything / rooting / read / read / read............I thought d/l mode was vol down and power. could be wrong.
follow instructions and let us know what happens. nothing worse than offering advice and not knowing if you helped.
Thanks for the advice. I did finally get into download mode but I can't really figure out what to do now. I think I just want to go back to stock. I tried doing it through KIES but that isn't working. If I use Odin, will it work?
activepassive said:
Thanks for the advice. I did finally get into download mode but I can't really figure out what to do now. I think I just want to go back to stock. I tried doing it through KIES but that isn't working. If I use Odin, will it work?
Click to expand...
Click to collapse
don't let one bad experience ruin it.
not many are willing to follow the advice. I know your new here. the advice is always read, read, read. feel as confident as you can in what you are doing. it took me the better part of a month to work up the courage to flash anything.
first thing.............get rid of the Note 2 file that you flashed. don't need to go through that again.
read super everything again and again if needed. get all the files you need together. walk through the processes in your head.
you should have Odin opened up when you go into D/L mode. wait for phone to register "com #?"
make sure you run Odin as "administrator"
go slow..........its a marathon not a sprint. whats you hurry.
check Youtube for a tutorial......make sure everything is for YOUR model
---------- Post added at 08:57 AM ---------- Previous post was at 08:50 AM ----------
Odin is the best and easiest way to return to stock, but you still have the same process to go through
Okay I tried to flash stock with Odin through download mode and everything seemed to work perfectly. It boots past the Samsung logo but NOW it gets stuck on the spinning T (I think it's a Korean thing) that is floating in space. Ugh, this is so frustrating.
I just want to get my phone back to normal at this point...
activepassive said:
Okay I tried to flash stock with Odin through download mode and everything seemed to work perfectly. It boots past the Samsung logo but NOW it gets stuck on the spinning T (I think it's a Korean thing) that is floating in space. Ugh, this is so frustrating.
I just want to get my phone back to normal at this point...
Click to expand...
Click to collapse
the T may be a Korean thing??? couldn't tell you for sure.
I may have gotten stuck at a similar point with my model.
I think 1 time I ran the Odin again and maybe another time I pulled battery and rebooted. but you have movement. we have had some files lately that just take longer to completely boot up.
patience
How long are you waiting for the spinning T to go away? It may take several minutes. Give it some time. And you are trying to install the stock SHV-E160 ROM and not something close?
Agoattamer said:
How long are you waiting for the spinning T to go away? It may take several minutes. Give it some time. And you are trying to install the stock SHV-E160 ROM and not something close?
Click to expand...
Click to collapse
I'm trying to install the 160S rom from this thread: http://forum.xda-developers.com/showthread.php?t=1899200
I've left the spinning T for about 20 minutes. SIt flashed okay in Odin but nothing is moving forward. I keep reading about the Tegrak rom and Clockwork recovery but I don't really know what those are. Should I try to read up more on that and try to that?
I'm not sure how that would work. I never saw or installed a rooted ROM using odin. I would think you would need a custom recovery first since all versions of superuser require it. Just guessing. So you have the E160S version? Try to use google to find a 100% stock (non rooted) ROM to install using Odin. I tried to search myself and found many links but was unable to read because of the different language. Maybe you will do better.
Also what version of odin did you use? Try to use the latest version 3.07
Root and recovery have nothing to do with each other.
You can be rooted with stock recovery,
Or have a custom recovery without root.
I've released a pre-rooted custom Rom .tar for use from going from bones stock to that Rom.
Not saying this isn't broken, just that it's doable.
Agoattamer said:
How long are you waiting for the spinning T to go away? It may take several minutes. Give it some time. And you are trying to install the stock SHV-E160 ROM and not something close?
Click to expand...
Click to collapse
Agoattamer said:
I'm not sure how that would work. I never saw or installed a rooted ROM using odin. I would think you would need a custom recovery first since all versions of superuser require it. Just guessing. So you have the E160S version? Try to use google to find a 100% stock (non rooted) ROM to install using Odin. I tried to search myself and found many links but was unable to read because of the different language. Maybe you will do better.
Also what version of odin did you use? Try to use the latest version 3.07
Click to expand...
Click to collapse
I've used 3.07 and 1.85 trying to flash the rooted rom I posted. I haven't been successful in finding a 100% stock ROM either. I do have E160S. I will keep looking for a 100% stock ROM

[Q] Help me I bricked my SGH-i717R

Hi I tried to root my phone using this method ( http://forum.xda-developers.com/showthread.php?t=1504218 ) and it left my phone stuck on the reboot. I then tried to flash the stock kernel via odin, and when that didn't work I flashed cwm via odin and then a rogers kernel through cwm and it is still stuck on the rogers logo.......?
could someone help me......?
AirForce 1 said:
Hi I tried to root my phone using this method ( http://forum.xda-developers.com/showthread.php?t=1504218 ) and it left my phone stuck on the reboot. I then tried to flash the stock kernel via odin, and when that didn't work I flashed cwm via odin and then a rogers kernel through cwm and it is still stuck on the rogers logo.......?
could someone help me......?
Click to expand...
Click to collapse
I see your post count and realize you cannot post in the development section yet. that should not however stop you from reading. maybe you have but you may not have read the whole thread. i know that may seem like a daunting task, it is for me. so what I o is go to the most recent post or last page and start reading backwards. that way I get the most up to date information even on an older thread as you are referring to.
if you did that you would have seen a post from AGOATTAMER.
http://rootgalaxynote.com/galaxy-note-i717-roms/how-to-root-att-galaxy-note-sgh-i717-icsgingerbreadeasiest-method/
this is also the method I used. believe me, if I can pull it off, anybody can.
more tips..............
make sure you have all the files you need
rehearse the process
I know it sounds crazy, but these phones aint cheap and if you mess it up, can be pretty screwed.
so what is more valuable???? your phone or acting crazy and talking to yourself for a few minutes.
if you can still get download mode, your good, no brick
good luck
You flashed an older incompatible kernel with a newer ROM, but I guess you know that now. Flash the stock ROM found here using odin.
http://www.hotfile.com/dl/213010140/75bf7e2/I717RUXMD1_I717RRWCMD1_RWC.zip.html
Go into recovery after install and do a factory reset. Then start over. Many have used the link that captemo has mentioned. There are newer versions of recovery than the one listed on that site but it will get you rooted. Look at this thread also. Since you are installing the stock ROM via odin you will not have to deal with the script mentioned here.
http://forum.xda-developers.com/showthread.php?t=2485336
Just flash twrp with Odin, don't reboot into android, not directly into recovery after the flash finishes...
In recovery wipe data/factory reset.
When you go to boot it'll see you're not rooted and ask if you want to.
The easiest method to root.
Edit: note to self
Self,
check links before posting to avoid repeating yourself
studacris said:
Edit: note to self
Self,
check links before posting to avoid repeating yourself
Click to expand...
Click to collapse
Good advice is always worth repeating.
Sent from my Big Ass Outlaw Phone.

Can I save this bricked Verizon i545?

I have a S4 i545 for Verizon. It was on 4.2.2 rooted and I upgraded using Fireflash with I545_OC1_Stock_DeOdexed_ROMwNK4_BL.zip. Everything seemed fine so I was using Titanium back up to remove the bloatware and then my battery died. When I charged it and booted up it got to the Verizon screen and hung there. I reset and tried several more times. I tried to use odin and flash a stock 4.2.2 ROM SCH-I545_VZW_1_20140330160240_yni63xq6zh and I also tried a 4.4.2 rom. Odin gave a an error and failed. I then tried going into the boot loader and flash the I545_OC1_Stock_DeOdexed_ROMwNK4_BL.zip also. Not sure if this was foolish or not but when I booted up I got to a black screen and there was a voice talking, maybe some sort of app that was running, but I couldn't do anything.
Right now when I turn on the phone it says firmware upgrade encountered an issue. Please select recovery mode in kies and try again. I tried connecting it to my computer and opening kies but it doesn't find it. If anyone can point me in the right direction on how to unbrick my S4 I would appreciate it. I know I screwed up.
as long as you can access ODIN you can unbrick. since your on 4.4.2 get the original rom and install. re root and install your rom of choice. from there if you have a previous backup in titanium you can restore
Sent from my LG-D415 using Tapatalk
I was on 4.2.2. I tried downloading the original ROM for this but it didn't work in Odin.
Problem is I can't get into download mode now, or recovery mode even. It's just at that screen I mentioned above. So Odin isn't recognizing my phone.
thats outside my knowledge base. sorry. good luck
Sent from my LG-D415 using Tapatalk
bump up
dr0832 said:
Problem is I can't get into download mode now, or recovery mode even. It's just at that screen I mentioned above. So Odin isn't recognizing my phone.
Click to expand...
Click to collapse
so if you hold down VOL- and power it doesn't go into download mode?
It won't be recognized in Odin until you get back to download mode. - in Odin then you'd want to flash the PIT file and the ROM you need.
The only other way to fix would be to get ahold of a copy of Verizon's Software Upgrade Assistant/Software Recovery Assistant, which looks like someone has uploaded here:
http://forum.xda-developers.com/showthread.php?t=2469615
The Software Recovery Assistant should fix it if nothing else does, I have used it before.
No when I turn it on it goes straight to the screen I mention with a yellow triangle and it does the same if I hold all the buttons down like you normally would to get in recovery.
I assume a battery pull didn't help. Since you have MDK, it MIGHT be worth it to get the JTAG dongle, which will boot the phone into download mode. It is about 3 bucks.
I tried installing in windows xp, windows 7 and windows 8 with no luck. I clicked the exe and it does nothing. I then tried installing on a MAC. It installed but when I went to run it the software opened for 1 second and then close with an error software closed unexpectedly. The I updated the software on the MAC and the software opened but the second I plugged in the phone it gave the same error. The MAC did find the phone though but windows did not.
bump
dr0832 said:
bump
Click to expand...
Click to collapse
Just plug the phone (on that screen) into your PC and see if it shows up in Odin.
If not, pull the battery, and hold the volume down and power buttons as you put the battery back in. Then choose Continue.
Did you read my post? I have done that. My phone is hard bricked. I can't get into recovery mode and therefore I can't get into download mode so therefore odin won't find my phone.
dr0832 said:
Did you read my post? I have done that. My phone is hard bricked. I can't get into recovery mode and therefore I can't get into download mode so therefore odin won't find my phone.
Click to expand...
Click to collapse
Which ROM did you flash, link?
Ahhh. The linked version of the Verizon Software Upgrade Assistant doesn't work. Sorry about that.
I just pulled the .iso from my S4 and posted it up, try this one: https://www.androidfilehost.com/?fid=24052804347780563
Per npjohnson advice I was able to get the phone into download mode. I misread your post at first so sorry about that. Now I need to figure out how to fix this. I flashed Lollipop originally so does that mean I can't actually go back to 4.2.2 using a stock ROM? Can someone point me to a ROM I should try to flash since the so called stock ROM's I have tried are failing in Odin.
I tried flashing this one:
http://stockroms.net/file/GalaxyS4/SCH-i545/VRUAMDK_NoWipe.tar.zip
It came from here:
http://galaxys4root.com/galaxy-s4-stock-firmware/
As for the Verizon assistant that was just posted it does not install just like the other. I click it and the screen flashed and then it does nothing.
dr0832 said:
Per npjohnson advice I was able to get the phone into download mode. I misread your post at first so sorry about that. Now I need to figure out how to fix this. I flashed Lollipop originally so does that mean I can't actually go back to 4.2.2 using a stock ROM? Can someone point me to a ROM I should try to flash since the so called stock ROM's I have tried are failing in Odin.
I tried flashing this one:
http://stockroms.net/file/GalaxyS4/SCH-i545/VRUAMDK_NoWipe.tar.zip
It came from here:
http://galaxys4root.com/galaxy-s4-stock-firmware/
As for the Verizon assistant that was just posted it does not install just like the other. I click it and the screen flashed and then it does nothing.
Click to expand...
Click to collapse
What lollipop did you flash originally? OTA?
I was rooted and then I flashed I545_OC1_Stock_DeOdexed_ROMwNK4_BL which I think is android 5.0.1. I used flashfire.
This was the thread I followed:
http://forum.xda-developers.com/gal...-to-update-to-i545oc1-5-0-1-keeproot-t3096558
Did the battery die on you? I think this is where you need the debrick image....
dr0832 said:
I was rooted and then I flashed I545_OC1_Stock_DeOdexed_ROMwNK4_BL which I think is android 5.0.1. I used flashfire.
This was the thread I followed:
http://forum.xda-developers.com/gal...-to-update-to-i545oc1-5-0-1-keeproot-t3096558
Click to expand...
Click to collapse
Probably should try the full factory image linked here: http://forum.xda-developers.com/gal...pment/odin-i545vrugoc1-factory-image-t3160125
That will put you on 5.0.1 OC1 including bootloader. You'll then root with Kingroot, use Super-sume to replace Kingroot with SuperSu and then you can use the NON-MDK ROM with FlashFire. (odex, or deodex if you want to use xposed modules.

Stuck at Recovery and can't boot android

So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im guessing you wiped device and if you go into recovery and try to reboot system it will tell you no os installed if that is the case you can plug device into computer and still use twrp as file manager thats if you had a backup stored on desktop or drag a CM zip to device .
other method of course would be to enter download mode and use odin to flash stock firmware for your device not sure if you have t399 or the N varient lastest beening OH2/OH3 you can find that in my filehost i have stock odin zips to flash.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Koohara947 said:
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Click to expand...
Click to collapse
Which stock rom did you use?
_PAG_ said:
Which stock rom did you use?
Click to expand...
Click to collapse
I used the download from this guide by ShabbyPenguin: http://androidforums.com/threads/guide-restore-your-galaxy-light-to-stock-mja.846767/
Hey guys...I did the same thing but my t399 must have lost battery charge because when I picked it back up, it was dead...I plugged in and it started flashing the Samsung screen slowly at me. It would not reboot. I did get download and twrp to show up and start to atleast work enough to flash and Odin again...I used Shabby's kernel source and it is still doing the same thing after flashing through Odin. Still stuck on Samsung screen slowly flashing and recovery shows no operating system. I'm about to put it back in a drawer but I feel it's so close that I had to ask for help. I flashed shabby work to root and recovery. I flashed twrp 2.7 and the cm12 beta rom. Then back to shabby guide to get it to recognize, it did..kind of..but still boot looped. Flashed 3 times... No changes. Can anyone help or is it time for a staircase? hA!
Oh yes .. I don't think the battery is bad.. I checked it with a meter and it reads voltage. It does get pretty hot while I'm working on it though and my pc shows its charged at 100% but the phone doesn't show that...it stays in like dead mode. Nit recognizing again. Anybody have suggestions? In recovery it also indicated it can not locate most of my files in read after I flash.. what am I doing wrong.
sgh-399n bootloop
It's taken me 2 months to cry for help. I'm not a complete noobie, but I'm completely exhausted. First of all, one morning I woke up and I thought that somehow my battery was dead. It wasn't. Eventually, I found it in a bootloop. This phone was working fine, running a "Tiger_Lilly" ROM the night before. I've tried everything using Odin, adb and fastboot (I'm not sure how to get the phone in fastboot mode and also, before using Odin, TWRP wouldn't mount/data.) I'm stumped. Would appreciate some help, thank you.
HELP...!!!
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Fidelacho16 said:
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Click to expand...
Click to collapse
What was you using prior to it bootlooping and what rom was installed have you modifed anything else such as partions etc...
also list your method and link rom your trying. just wondering if its the lastest version for device. while in odin also make sure Auto Reboot” and “F. Reset Time is only selected and what version of odin are you using?
If your unable to flash any rom thru odin then there must be a major problem else where until we can narrow it down no one can assist you.
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Fidelacho16 said:
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Click to expand...
Click to collapse
Ok try this version of odin 3.0.7 which i added as attachment also i linked my firmware OH3 as you stated your device is t399n i know sammobile takes long to download so this may be faster for you Link HERE
as stated previously make sure only thing selected is Auto Reboot” and “F. Reset Time and add tar file into PDA.
I await your reply if fails i send you adb fastboot etc may be able to grab some logs see whats happening

Samsung s3 i9300 without screen touch support problem

im using cm12 archidroid 3.5.14 and decided to update to 3.5.15 version last night. but the update didnt went well, something went wrong and i got 'recursive' error, and it started to boot loops.
i tried so many solutions, i odin this and that and nothing worked. i downloaded cwm 6.0.0.47 i think, and managed to install the AD rom, but now im stuck at languange selection, i cant select anything because screen support isnt working
what do i do now?
Samsung S3 i9300
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Hawaiihemd said:
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Click to expand...
Click to collapse
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
I would try to flash latest AD again but with a proper up-to-date recovery
Click to expand...
Click to collapse
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
ricvai7 said:
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
Click to expand...
Click to collapse
Well then, if you already flashed stock rom via odin, your data is already gone. Make sure your phone is working on stock first now. Please be aware that the first boot after each rom flash might take up to 15 min or so because the cache has to be built at first boot!
You can find the link to TWRP recovery in my signature (see My Gadgets). I suggest your read the tutorials that are linked there also for more information.
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
ricvai7 said:
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
Click to expand...
Click to collapse
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
ricvai7 said:
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
Click to expand...
Click to collapse
i havent solved the problem with touch screen. can anybody help?

Categories

Resources