[Q] help please my touch fail sk17a mini pro - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

this is my problem really hope you can help me connect my phone to a computer that is not without its usual original USB cable because I forgot and had to load it and now reads the touch does not work because there will know someone that change is required or only a software error? thanks for your help sorry for my bad english not speak much english!

did u try to flash back rom using flashtool? because you can not use the touch screen, u should connect it to the pc and using flashtool to restore your phone to its original state. go to general section. go to this link http://forum.xda-developers.com/showthread.php?t=1568792 download the rom and flash using flashtool. hope it helps.

flash a stock rom of your choice can be gingerbread or ics, because what we have is sotfware problem :highfive:

Related

Back to stock help

Please help me out with this. I really dont have time to search the thousands of posts and threads. I have done a few google searches but found nothing.
I need to get a xperia x10 ATT back to stock ROM. No custom anything. Are there any flashable .zips that are out there to do this? I need a flashable zip to flash it just like with the custom roms.
Thanks
dubie76 said:
Please help me out with this. I really dont have time to search the thousands of posts and threads. I have done a few google searches but found nothing.
I need to get a xperia x10 ATT back to stock ROM. No custom anything. Are there any flashable .zips that are out there to do this? I need a flashable zip to flash it just like with the custom roms.
Thanks
Click to expand...
Click to collapse
The tool that will help you get back to stock, Flashtool.
http://forum.xda-developers.com/showthread.php?t=920746
The guide to use Flashtool.
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
I can help you more if you need it in the morning. This will give you an idea to at least help you or get maybe help you figure it out.
The stock will be 2.1.
Or, you can connect your device in flashmode w/ PC companion open and select the repair option...
Once compleated your device' ll be on stock (2.1)
Hope it helps =D
You can download PC companion from SE site. Click phone update and click repair phone and then flash your phone (should be charged at least 50%) like using flash tool and then the PC companion will download software and flash to stock ROM.
I repaired using se pc app. It flashed. But ut didnt do anything. After reboot custom rom is still on
Sent from my X10i using XDA App

[Q] problem with flashing

hi everyone!
I've got a problem with my phone, becouse it stocks at SE screen and restarts!
I now how to reflash using update service but its not working it says NO Update Fund and its closing please help
If SEUS can't help you should use PC Companion. I know this program isn't very good but i had simular problem and when SEUS couldn't help me I use PC Companion. You must download the newest version or upgrade old version to new. You're from poland so i write some words in PC Companion in polish.
First click "Sekcja Support Zone" and it should start download files (1 mb i think). Next click "Rozpocznij" under "Aktualizacja oprogramowania telefonu" then click "napraw" and follow the instruction.
Good Luck
but pc companion says me the same
--------
my eanglish is bad
allen400 said:
hi everyone!
I've got a problem with my phone, becouse it stocks at SE screen and restarts!
I now how to reflash using update service but its not working it says NO Update Fund and its closing please help
Click to expand...
Click to collapse
use flash tool
download it from
http://forum.xda-developers.com/showpost.php?p=10738287&postcount=1
then download Firmwares FTF formate
i downloaded from XDA forum but forget which thread if you cant find pm me
its easy to flash this will work for sure
download firmware and how to flash here
http://forum.xda-developers.com/showpost.php?p=10879507&postcount=1
Help with flash
I am new to this and i need some help. I want to install app2sd and multitouch to my xperia pro, but I saw I need the latest firmware before i can do this. (I am on 2.0.A.0.504 2.6.29). My question is where can i find details on whow to flash the latest firmware and what happens with all my programs and data on the phone when i flash it?
duleks said:
I am new to this and i need some help. I want to install app2sd and multitouch to my xperia pro, but I saw I need the latest firmware before i can do this. (I am on 2.0.A.0.504 2.6.29). My question is where can i find details on whow to flash the latest firmware and what happens with all my programs and data on the phone when i flash it?
Click to expand...
Click to collapse
Goto sony ericssons support site!

touchscreen and touch keys not working after flashing sk17i firmware,what me doing?

Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Jaroslav285 said:
Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Click to expand...
Click to collapse
You'll have to flash your stock fw via flashtool then again install the correct fw for your st15i
i flashing on flashtool,but touchscreen not working,i flashing stock via flashtool and flash after via seus new firmware, but touchscreen not working
Yes its working but its really black,disnt sure but it should work,turn on phone and slide your finger where is unlock key if it vibrate then you got same problem like me,after flashing touch screen went black and reflashing doesnt fix it.
Sent from my WT19i using Tapatalk
how fix my phone?for work the touch screen and touch keys....
Try reflash it back to the orginal firmware then try again. Something might have gone wrong while you was flashing or the one you flashed was for a different phone.
Thank you, but your advice did not help me,my phone everything not helping, I'm sitting for three days without a phone ...help me please
i am aslo having same problem guys please help...
does anyone know how to get the touchscreen to life, the above does not help ????
Jaroslav285 said:
does anyone know how to get the touchscreen to life, the above does not help ????
Click to expand...
Click to collapse
i was having same problem...so i went to service center and they said touch panel is damage and they replace it without any cost..i think you should go to service center and tell them that your touchscreen is not working and if your bootloader is unlocked they dont tell them that your bootloader is unlocked..
the same thing
any idea
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Sorry for my bad english. I've the same problem. After taking my phone to service they told me that fixing will costs about 150€ and I've refused it. So I would like to try these instuctions:
1) OK
2) hybromV10 DL: https: // dl.dropbox.com/u/61884099/hybrom_v10.zip OK but I've no CWM installed and I'm not root, how can I install it?
3) OK
You've been unlock bootloader first bro to install custom kernel to make your CWM and Root Access,,
Sent from my ST15i using xda premium
Didnt work for me
Jaroslav285 said:
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Click to expand...
Click to collapse
didnt work for me...tried but no worth...
any other soln.>??:crying:

[Q] xperia x10 mini Bricked

I tried to flash my phone with the cyanmod 7 but after updating now i cant switch it off using the power button i have to use the power button and the square button then it starts up but only gets to the screen that says sony ericsson but it wont go any further and i cant boot into cwm recovery please help, can i repair this or will i have to take it to the shop
Thanks
try using SEUS first
demoniacs said:
try using SEUS first
Click to expand...
Click to collapse
that's the answer for all problems?
I say the same like Demoniacs, the easy way to restore to stock mode is using SEUS or PC Companion.
And if you are traying CM7, you have to unlock your bootloader to flash the custom kernel (nAa's the best), be very carefully doing this. And here you are the flastool guide to unlock,etc...:
http://forum.xda-developers.com/showthread.php?p=10881307
Sorry my english
Solved
i managed to re-flash to stock via seus thanks people, is there an easy way to flas cm mod on to this phone as on samsung europa it was much easier???
I used Flashtool on my x10 mini, took 10 mins to root,unlock bootloader and flash nAa kernal and cm 7.2.
There are lots of guides on the forums, best advice I can give is to search and read everything 2/3 times and then have a go
Sent from my E10i using XDA
thanks
doubleon said:
I used Flashtool on my x10 mini, took 10 mins to root,unlock bootloader and flash nAa kernal and cm 7.2.
There are lots of guides on the forums, best advice I can give is to search and read everything 2/3 times and then have a go
Sent from my E10i using XDA
Click to expand...
Click to collapse
cheers pal i may give it another go tonight now i know i can recover it using seus cant find thanks button so thanks pal
jonny
Try to use wotanserver
My phone has bricked for almost 5 times today because testing new kernel in this forum and rom....and wotanserver always help me restore my phone with original and stock firmware (2.1 Update 1)

My touchsreen dont works

Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
i think you must reinstall firmware
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
did you flash a kernel when you installed the rom?
if yes then you must have flashed one for the wrong device, please chaeck otherwise flashing original firmware will make everything all right
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
R10MaRiOo said:
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
Click to expand...
Click to collapse
best way to check, flash original firmware!
this thread has ftf if you don't have it
http://forum.xda-developers.com/showthread.php?t=1568792
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
installing a ftf is like reverting it to a stock stage, if your phone was working then, it should work now. are you sure you installed sk17 and not st17?
i cannot think of any other reason for this..
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
Try flashing Stock firmware 5 to 6 times. I read somewhere that some times touch drivers are lost which can only be restored by flashing stock again and again
You can also refer this thread
OMG!! i flashed it six times and the screen doesnt work )=
Maybe if i install a rom from another model like mini or live with walkman
I thought that because whent the problem starts i change my build prop to make run a wt19 rom! with the boot_official_port_mango kernel, maybe my phone thinks its another phone xD
Well, you can always restore your phone with the Sony app and start again.
Anyway, I don't think its a good idea to try to use a ROM made for another device.
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
On PC Companion, start the "Support Zone" and you can restore from here. I think Sony dont support SEUS anymore, but you can find it in some forums or download sites.
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
here's SEUS
http://dl.dropbox.com/u/63607856/temp/Update_Service_Setup-2.11.7.13.exe
btw i am not sure that SEUS works with unlocked bootloaders, still no harm in trying.. good luck
Fix
Try the fix from here
It helps me.
Thanks Kobzar666
But its is a fix for st15
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
so i have to interchange i mean
-STEP 1: Install lastest firmware .62 for sk17i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (st15i)
-STEP 3: Then again flash lastest firmware .62 for st17i
someone can upload HYBROM v10
the files in the official post are private
Doesn't have to be Hybrom v10. It is a rare solution anyway...
Sent from my Xperia Live using xda premium.
so i can flash any rom just have to be be for st15??
Something like that happened to me with an X8 with unlocked bootloader and custom ROM.
Everything was fine for a month and then literally out of nowhere the phone s speaker stopped working! Just like that! No alarms,no ringing...nothing!
Before throwing away the phone,I gave it a shot and re flashed stock locked bootloader and ROM and everything started working again!
I then sold it and got a mini! :-D
N.
Sent from one of my 4 iPads.
I Fix It!!
Thanks for everyone who try to helps me, I fix it flashing it with wotan server, yes i have to buy a credit! But now everything works again
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
Try to reflash firmware via wotan client

Categories

Resources