Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
i think you must reinstall firmware
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
did you flash a kernel when you installed the rom?
if yes then you must have flashed one for the wrong device, please chaeck otherwise flashing original firmware will make everything all right
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
R10MaRiOo said:
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
Click to expand...
Click to collapse
best way to check, flash original firmware!
this thread has ftf if you don't have it
http://forum.xda-developers.com/showthread.php?t=1568792
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
installing a ftf is like reverting it to a stock stage, if your phone was working then, it should work now. are you sure you installed sk17 and not st17?
i cannot think of any other reason for this..
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
Try flashing Stock firmware 5 to 6 times. I read somewhere that some times touch drivers are lost which can only be restored by flashing stock again and again
You can also refer this thread
OMG!! i flashed it six times and the screen doesnt work )=
Maybe if i install a rom from another model like mini or live with walkman
I thought that because whent the problem starts i change my build prop to make run a wt19 rom! with the boot_official_port_mango kernel, maybe my phone thinks its another phone xD
Well, you can always restore your phone with the Sony app and start again.
Anyway, I don't think its a good idea to try to use a ROM made for another device.
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
On PC Companion, start the "Support Zone" and you can restore from here. I think Sony dont support SEUS anymore, but you can find it in some forums or download sites.
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
here's SEUS
http://dl.dropbox.com/u/63607856/temp/Update_Service_Setup-2.11.7.13.exe
btw i am not sure that SEUS works with unlocked bootloaders, still no harm in trying.. good luck
Fix
Try the fix from here
It helps me.
Thanks Kobzar666
But its is a fix for st15
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
so i have to interchange i mean
-STEP 1: Install lastest firmware .62 for sk17i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (st15i)
-STEP 3: Then again flash lastest firmware .62 for st17i
someone can upload HYBROM v10
the files in the official post are private
Doesn't have to be Hybrom v10. It is a rare solution anyway...
Sent from my Xperia Live using xda premium.
so i can flash any rom just have to be be for st15??
Something like that happened to me with an X8 with unlocked bootloader and custom ROM.
Everything was fine for a month and then literally out of nowhere the phone s speaker stopped working! Just like that! No alarms,no ringing...nothing!
Before throwing away the phone,I gave it a shot and re flashed stock locked bootloader and ROM and everything started working again!
I then sold it and got a mini! :-D
N.
Sent from one of my 4 iPads.
I Fix It!!
Thanks for everyone who try to helps me, I fix it flashing it with wotan server, yes i have to buy a credit! But now everything works again
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
Try to reflash firmware via wotan client
Related
hi,
guys.. i think i bricked my phone and it goes like this i will say it from the very start happening.
first, im using EWjet firmware quite a while and it ver 2.3.3 base 71 and it working fine just that battery ran out very fast, so i decieded wanna to change to another firmware so i saw this MIUI prime firmware it seem not bad so i wanna give a try. so i follow the instruction about the first time and than i find out that my ver and base 71 still can go install the firmware, so i downloaded and install, but who knows once i install and i reboot and it stuck at bootloader with the SONY ERICSSON sign in the middle of my phone screen and i tried go to recovery and it seem can't go through and it stuck so i think i bricked my phone. after this bricked i did go try the pc companion to repair my phone it not working and it say download error. and i also think tried flash with kernel downgrade and upgrade it not working too. PLEASE EXPERT HELP ME.
XxMakerxX said:
hi,
guys.. i think i bricked my phone and it goes like this i will say it from the very start happening.
first, im using EWjet firmware quite a while and it ver 2.3.3 base 71 and it working fine just that battery ran out very fast, so i decieded wanna to change to another firmware so i saw this MIUI prime firmware it seem not bad so i wanna give a try. so i follow the instruction about the first time and than i find out that my ver and base 71 still can go install the firmware, so i downloaded and install, but who knows once i install and i reboot and it stuck at bootloader with the SONY ERICSSON sign in the middle of my phone screen and i tried go to recovery and it seem can't go through and it stuck so i think i bricked my phone. after this bricked i did go try the pc companion to repair my phone it not working and it say download error. and i also think tried flash with kernel downgrade and upgrade it not working too. PLEASE EXPERT HELP ME.
Click to expand...
Click to collapse
Ewjet MIUI etc are ROMs not firmwares. If pc companion or seus don't work then search for flashtool and use this to install global generic firmware. This will put ur phone back to how it was when u first got it
Sent from my X10i using XDA App
laneyofdeath said:
Ewjet MIUI etc are ROMs not firmwares. If pc companion or seus don't work then search for flashtool and use this to install global generic firmware. This will put ur phone back to how it was when u first got it
Sent from my X10i using XDA App
Click to expand...
Click to collapse
hey laneyofdeath thanks for help and one more question where can i find this global generic firmware and after i flash it back. can i still able to rooted to MIUI rom again?
XxMakerxX said:
hey laneyofdeath thanks for help and one more question where can i find this global generic firmware and after i flash it back. can i still able to rooted to MIUI rom again?
Click to expand...
Click to collapse
hey laneyofdeath i got it THANK you very much!
XxMakerxX said:
hey laneyofdeath i got it THANK you very much!
Click to expand...
Click to collapse
No probs buddy
Edit: Also yeah u will need to start from beginning again though do u have backup (titanium or similar?). If not, you will have to re-install all apps from market.
Sent from my X10i using XDA App
Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Jaroslav285 said:
Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Click to expand...
Click to collapse
You'll have to flash your stock fw via flashtool then again install the correct fw for your st15i
i flashing on flashtool,but touchscreen not working,i flashing stock via flashtool and flash after via seus new firmware, but touchscreen not working
Yes its working but its really black,disnt sure but it should work,turn on phone and slide your finger where is unlock key if it vibrate then you got same problem like me,after flashing touch screen went black and reflashing doesnt fix it.
Sent from my WT19i using Tapatalk
how fix my phone?for work the touch screen and touch keys....
Try reflash it back to the orginal firmware then try again. Something might have gone wrong while you was flashing or the one you flashed was for a different phone.
Thank you, but your advice did not help me,my phone everything not helping, I'm sitting for three days without a phone ...help me please
i am aslo having same problem guys please help...
does anyone know how to get the touchscreen to life, the above does not help ????
Jaroslav285 said:
does anyone know how to get the touchscreen to life, the above does not help ????
Click to expand...
Click to collapse
i was having same problem...so i went to service center and they said touch panel is damage and they replace it without any cost..i think you should go to service center and tell them that your touchscreen is not working and if your bootloader is unlocked they dont tell them that your bootloader is unlocked..
the same thing
any idea
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Sorry for my bad english. I've the same problem. After taking my phone to service they told me that fixing will costs about 150€ and I've refused it. So I would like to try these instuctions:
1) OK
2) hybromV10 DL: https: // dl.dropbox.com/u/61884099/hybrom_v10.zip OK but I've no CWM installed and I'm not root, how can I install it?
3) OK
You've been unlock bootloader first bro to install custom kernel to make your CWM and Root Access,,
Sent from my ST15i using xda premium
Didnt work for me
Jaroslav285 said:
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Click to expand...
Click to collapse
didnt work for me...tried but no worth...
any other soln.>??:crying:
First i read the little tutorial with st17 dont think it work to sk17i , i try to flash stock .58 with flash tool many times , and with seus Repair for many times , all kernels , roms etc.
downloaded work boot (for active) and instaled the good rom for sk17i only the boot i think it was wrong , it was with red ...i think it was for active , i was in hurry (@work) :crying::crying:
so anyone know about this problem ?
my phone last Waranty day 19.06
So... err.. you flashed an ST17 ROM on your SK17i?
...and now the touch is dead?
Well, have a look see on the thread below. We have a long standing discussion on the matter and some probable fixes you can try.. Good luck mate~
http://forum.xda-developers.com/showthread.php?t=1713449
I have the same problem. I never installed ROMs on my sk17i and the touchscreen just stoped working.
I already tried to restore by PCC or flashtool, but nope.
I've read that thread, but aren't the solutions for ST15i? And don't i need to have root to try those solutions?
yes it is for st15 / walkman , and root u can get if u install costum kernel but the problem it is not this , it is we can to make the touch to work or we trow the phone ...
i try last night : install x kernel + rom for active the touch worked 40% , then install via flashtool the stock for active the same , then when i go back to my stock for sk17i the touch is dead...
nobody here have a solution ?
update
seems i was flashing first with rage kernel for xperia arc dont now from where the hell i get the kernel , and the all roms it is for mini pro it is ok only the kernel was wrong
Gordalhao said:
I have the same problem. I never installed ROMs on my sk17i and the touchscreen just stoped working.
I already tried to restore by PCC or flashtool, but nope.
I've read that thread, but aren't the solutions for ST15i? And don't i need to have root to try those solutions?
Click to expand...
Click to collapse
If you never flashed any rom, then it's most likely hardware mate. Sending for repairs is your only fix.
Sent from my WT19i using XDA Premium App
If I may not be too late, I also got this problem (flashed lww kernel and ROM on xmp).
Touchscreen and home buttons stopped working, even in recovery.
I flashed paranoid android kernel (the ROM I used before this happened),
Factory reset, format system and dalvik cache in recovery.
Let the phone boot with no system.
Wait....nothing will happen. Then take off the battery and insert again.
The phone is back to normal.
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
Did you unlock bootloader on official way or via testpoint?
Flash the stockrom and see what happens...
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
bekris56 said:
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
Click to expand...
Click to collapse
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
mihahn said:
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
Click to expand...
Click to collapse
I did it....still the same problem...!
bekris56 said:
I did it....still the same problem...!
Click to expand...
Click to collapse
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
mihahn said:
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
Click to expand...
Click to collapse
You mean to flash 2 times the same ftf?
Oh so you mean you have installed stock firmware and touch isn't working anyway? There are some threads about how to fix touchscreen with hybrom (like sandy7 said)
Sent from my SK17i running Jelly Bean via CM10
sandy7 said:
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
Click to expand...
Click to collapse
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
LLoSER said:
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
Click to expand...
Click to collapse
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
gouthamthemostwanted said:
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
Click to expand...
Click to collapse
Hi, first thanks for your help.
But I've done what I mentioned twice and the touch screen is still not working. Can you think of any other solution?. thanks
bekris56 said:
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Click to expand...
Click to collapse
search xda for the tut how to solve ur problem....
and hybrom link u can find it here http://forum.xda-developers.com/showthread.php?t=1879666
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
Hello, I have the same problem as you with the mini st15i. Could you tell me all the steps to make it work?
Thanks in advance.
need help with my wt19i
i have the same problem too :crying: last night i've flashed wrong cusrom (should have known it for mini pro) but mine is wt19i and the touchscreen was never responding ever since. I've tried so many ways in i.e :
http://forum.xda-developers.com/showthread.php?t=1856334
http://forum.xda-developers.com/showthread.php?t=1927058
http://forum.xda-developers.com/showthread.php?t=1779023
http://forum.xda-developers.com/showthread.php?t=1721331
none worked for me. Not even partially . Been tried using rage kernel 2.6, 2.7, X-kernel, KrSH kernel. Hybrom v10, v12 minipro, v12 lww. but it just can't boot seems like i'm desperate right now. Do i have to keep flashing again and again? bcause i see some comments about just tried to keep flashing to their devices and sometime it could magically turn the touchscreen to work
Hybrom v12
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
I searched for hybrom v12 mini pro for about half an hour, if you know the right method and link kindly reply me asap and with full instructions. I am also Lww user and facing same touch screen issue.
I will appreciate your concern.
Thanks.
Help me with this method
https://forum.xda-developers.com/xperia-mini/help/tp-firmware-config-file-to-fix-t3704805
Hello to everynoe. Neo v user, rooted but bricked phone... Had stock ics kernel rooted with f/w .587. Flashed UHD but changed mind and wanted to downgrade to gb, .62... The mistake? I flashed immediately the f/w, the ftf file... Of course it stuck at the file "system.[i can't remember]" for too long. After that flashed kernel .562 and tried to flash the same f/w but nothing. Now i downloaded .587 ftf, full... What should i do??? My phone stucks at sony logo...
I know i messed it up but,
help... (Desperate)
Can your phone enter flashmode or fsstboot?
venoma333 said:
Can your phone enter flashmode or fsstboot?
Click to expand...
Click to collapse
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Well why don't you just flash a stock ftf?
georgiougio said:
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Click to expand...
Click to collapse
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
venoma333 said:
Well why don't you just flash a stock ftf?
Click to expand...
Click to collapse
LoneWanderer said:
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
Click to expand...
Click to collapse
I tried to flash ftf stock but it stucks flashing system.sin... Now i m waiting 14min to flash it.... Same percentage... Should i be more patient??
Is your phone's bootloader unlocked?
venoma333 said:
Is your phone's bootloader unlocked?
Click to expand...
Click to collapse
No.
Then try repairing with SEUS.
Use Google to find it.
venoma333 said:
Then try repairing with SEUS.
Use Google to find it.
Click to expand...
Click to collapse
Well, i tried it too but it tells me "You have the latest version"... I ll try again. Does this program has more functions??? Isn't it just for repairing?
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
venoma333 said:
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
Click to expand...
Click to collapse
The strange is that it doesn't say any version, just phone model, and "You have the latest version"... I try to flash now gb ftf .62 and i will wait how long it takes... Even 45'! Patience. Nothing else i can do!
Yeah well try that for as long as it takes, I can't think of anything that would solve your issue right now
I upload 2 pic to see how s the situation and give some help... When i open it these 2 appear. Forst the logo. Then the other and closes by its own...
What can i do?????
Try flashing just the stock Kernel of your phone version..
Had the same problem three weeks ago, can't flash system.sin . As far as I know, there's no solution for you. Fortunately, I took the phone to a repair centre and my phone was fixed under warranty (bricked while updating with SUS).
TodorSRB said:
Try flashing just the stock Kernel of your phone version..
Click to expand...
Click to collapse
Yes Todor, this is what i ve done many times in the past and what i tried yesterday and i m going to do it now too. It's just that for some reason yesterday it didn't flash system.sin FOR NOTHING after 25'! I ve unistalled flashtools now, cleaned up reg, and i ll set it up again as i ll update my java.
1 quest: is there ANY possibility that flashtools won't work with a well set up system and software???
Ok. Finally flashed succesfully! Just needed other computer because the one i used was TOOOOOO slow... :laugh: :laugh: :laugh: :laugh: :laugh:
This flashtool issue is becoming more and more common... The best thing to do when flashtool fails is to try in another y computer...
Sent from my Xperia Neo V using xda app-developers app
i think my phone is bricked
unlocked bootloader , still trying to root , no cwm or any recovery . flashed a kernel using flashtool . after that , it just restart at sony logo . is it hopeless or can be saved ?