First i read the little tutorial with st17 dont think it work to sk17i , i try to flash stock .58 with flash tool many times , and with seus Repair for many times , all kernels , roms etc.
downloaded work boot (for active) and instaled the good rom for sk17i only the boot i think it was wrong , it was with red ...i think it was for active , i was in hurry (@work) :crying::crying:
so anyone know about this problem ?
my phone last Waranty day 19.06
So... err.. you flashed an ST17 ROM on your SK17i?
...and now the touch is dead?
Well, have a look see on the thread below. We have a long standing discussion on the matter and some probable fixes you can try.. Good luck mate~
http://forum.xda-developers.com/showthread.php?t=1713449
I have the same problem. I never installed ROMs on my sk17i and the touchscreen just stoped working.
I already tried to restore by PCC or flashtool, but nope.
I've read that thread, but aren't the solutions for ST15i? And don't i need to have root to try those solutions?
yes it is for st15 / walkman , and root u can get if u install costum kernel but the problem it is not this , it is we can to make the touch to work or we trow the phone ...
i try last night : install x kernel + rom for active the touch worked 40% , then install via flashtool the stock for active the same , then when i go back to my stock for sk17i the touch is dead...
nobody here have a solution ?
update
seems i was flashing first with rage kernel for xperia arc dont now from where the hell i get the kernel , and the all roms it is for mini pro it is ok only the kernel was wrong
Gordalhao said:
I have the same problem. I never installed ROMs on my sk17i and the touchscreen just stoped working.
I already tried to restore by PCC or flashtool, but nope.
I've read that thread, but aren't the solutions for ST15i? And don't i need to have root to try those solutions?
Click to expand...
Click to collapse
If you never flashed any rom, then it's most likely hardware mate. Sending for repairs is your only fix.
Sent from my WT19i using XDA Premium App
If I may not be too late, I also got this problem (flashed lww kernel and ROM on xmp).
Touchscreen and home buttons stopped working, even in recovery.
I flashed paranoid android kernel (the ROM I used before this happened),
Factory reset, format system and dalvik cache in recovery.
Let the phone boot with no system.
Wait....nothing will happen. Then take off the battery and insert again.
The phone is back to normal.
Related
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
i think you must reinstall firmware
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
did you flash a kernel when you installed the rom?
if yes then you must have flashed one for the wrong device, please chaeck otherwise flashing original firmware will make everything all right
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
R10MaRiOo said:
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
Click to expand...
Click to collapse
best way to check, flash original firmware!
this thread has ftf if you don't have it
http://forum.xda-developers.com/showthread.php?t=1568792
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
installing a ftf is like reverting it to a stock stage, if your phone was working then, it should work now. are you sure you installed sk17 and not st17?
i cannot think of any other reason for this..
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
Try flashing Stock firmware 5 to 6 times. I read somewhere that some times touch drivers are lost which can only be restored by flashing stock again and again
You can also refer this thread
OMG!! i flashed it six times and the screen doesnt work )=
Maybe if i install a rom from another model like mini or live with walkman
I thought that because whent the problem starts i change my build prop to make run a wt19 rom! with the boot_official_port_mango kernel, maybe my phone thinks its another phone xD
Well, you can always restore your phone with the Sony app and start again.
Anyway, I don't think its a good idea to try to use a ROM made for another device.
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
On PC Companion, start the "Support Zone" and you can restore from here. I think Sony dont support SEUS anymore, but you can find it in some forums or download sites.
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
here's SEUS
http://dl.dropbox.com/u/63607856/temp/Update_Service_Setup-2.11.7.13.exe
btw i am not sure that SEUS works with unlocked bootloaders, still no harm in trying.. good luck
Fix
Try the fix from here
It helps me.
Thanks Kobzar666
But its is a fix for st15
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
so i have to interchange i mean
-STEP 1: Install lastest firmware .62 for sk17i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (st15i)
-STEP 3: Then again flash lastest firmware .62 for st17i
someone can upload HYBROM v10
the files in the official post are private
Doesn't have to be Hybrom v10. It is a rare solution anyway...
Sent from my Xperia Live using xda premium.
so i can flash any rom just have to be be for st15??
Something like that happened to me with an X8 with unlocked bootloader and custom ROM.
Everything was fine for a month and then literally out of nowhere the phone s speaker stopped working! Just like that! No alarms,no ringing...nothing!
Before throwing away the phone,I gave it a shot and re flashed stock locked bootloader and ROM and everything started working again!
I then sold it and got a mini! :-D
N.
Sent from one of my 4 iPads.
I Fix It!!
Thanks for everyone who try to helps me, I fix it flashing it with wotan server, yes i have to buy a credit! But now everything works again
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
Try to reflash firmware via wotan client
Hello everyone , today i re rooted my sk17i , installed cwm recovery and everything was going fine.I downloaded this rom called hybrom v15, i wiped the phone ,and insalled the rom. When i turn on the phone , it just stays on the Sony Ericsson Logo D: , i need help please! this thing has been like this for hours! how can i fix it ? I hope for a reply soon!
Thank you
xZeruda said:
Hello everyone , today i re rooted my sk17i , installed cwm recovery and everything was going fine.I downloaded this rom called hybrom v15, i wiped the phone ,and insalled the rom. When i turn on the phone , it just stays on the Sony Ericsson Logo D: , i need help please! this thing has been like this for hours! how can i fix it ? I hope for a reply soon!
Thank you
Click to expand...
Click to collapse
Hello.
Is your bootloader unlocked? Or you installed CWM using nAa's installer?
Thanks,
Rick
Sent from my SK17i using XDA
I don't know D:
I was such in a hurry i didn't check , i assume this it wasn't , maybe thats the cause of the freeze , is there anyway to fix it :'(
xZeruda said:
I was such in a hurry i didn't check , i assume this it wasn't , maybe thats the cause of the freeze , is there anyway to fix it :'(
Click to expand...
Click to collapse
Do not worry.
Check the Downgrade to GB section here:
http://talk.sonymobile.com/thread/35239?tstart=0
Steps are easy to follow and hopefully will solve your issue. And for ftf files for firmwares other than those listed there, search here on XDA.
And for your information, never try to flash a ROM using CWM by nAa's method. That CWM recovery is at /system. And most Roms replace the/system, and thus messes with the CWM on way. So, if you want to flash custom Roms, unlock the bootloader.
Thanks,
Rick
Hit Thanks if I helped in anyway
Sent from my SK17i using XDA
xZeruda said:
Hello everyone , today i re rooted my sk17i , installed cwm recovery and everything was going fine.I downloaded this rom called hybrom v15, i wiped the phone ,and insalled the rom. When i turn on the phone , it just stays on the Sony Ericsson Logo D: , i need help please! this thing has been like this for hours! how can i fix it ? I hope for a reply soon!
Thank you
Click to expand...
Click to collapse
Sorry friend you do not have the full backup of your original ROM. Had it was easy.
I'll try to help you with a hint can not say that it will work. For I have not tried this.
Go here to download the ZIP file http://forum.xda-developers.com/showthread.php?t=1568792refente the ROM of your device. Then please make sure that you load on | You will need to charge your battery in another material. After that try to install the ROM ZIP with CWM. I believe this will work. : Cool:After I installed a wrong kernel LWW my phone stopped starting. I could not even outrar Kernel flasher so it was thanks to CWM that saved the life of my phone with Full Backup Original ROM that always has to be done before anything else.
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
Did you unlock bootloader on official way or via testpoint?
Flash the stockrom and see what happens...
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
bekris56 said:
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
Click to expand...
Click to collapse
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
mihahn said:
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
Click to expand...
Click to collapse
I did it....still the same problem...!
bekris56 said:
I did it....still the same problem...!
Click to expand...
Click to collapse
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
mihahn said:
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
Click to expand...
Click to collapse
You mean to flash 2 times the same ftf?
Oh so you mean you have installed stock firmware and touch isn't working anyway? There are some threads about how to fix touchscreen with hybrom (like sandy7 said)
Sent from my SK17i running Jelly Bean via CM10
sandy7 said:
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
Click to expand...
Click to collapse
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
LLoSER said:
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
Click to expand...
Click to collapse
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
gouthamthemostwanted said:
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
Click to expand...
Click to collapse
Hi, first thanks for your help.
But I've done what I mentioned twice and the touch screen is still not working. Can you think of any other solution?. thanks
bekris56 said:
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Click to expand...
Click to collapse
search xda for the tut how to solve ur problem....
and hybrom link u can find it here http://forum.xda-developers.com/showthread.php?t=1879666
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
Hello, I have the same problem as you with the mini st15i. Could you tell me all the steps to make it work?
Thanks in advance.
need help with my wt19i
i have the same problem too :crying: last night i've flashed wrong cusrom (should have known it for mini pro) but mine is wt19i and the touchscreen was never responding ever since. I've tried so many ways in i.e :
http://forum.xda-developers.com/showthread.php?t=1856334
http://forum.xda-developers.com/showthread.php?t=1927058
http://forum.xda-developers.com/showthread.php?t=1779023
http://forum.xda-developers.com/showthread.php?t=1721331
none worked for me. Not even partially . Been tried using rage kernel 2.6, 2.7, X-kernel, KrSH kernel. Hybrom v10, v12 minipro, v12 lww. but it just can't boot seems like i'm desperate right now. Do i have to keep flashing again and again? bcause i see some comments about just tried to keep flashing to their devices and sometime it could magically turn the touchscreen to work
Hybrom v12
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
I searched for hybrom v12 mini pro for about half an hour, if you know the right method and link kindly reply me asap and with full instructions. I am also Lww user and facing same touch screen issue.
I will appreciate your concern.
Thanks.
Help me with this method
https://forum.xda-developers.com/xperia-mini/help/tp-firmware-config-file-to-fix-t3704805
I recently installed LWW rom on my mini by mistake, now its touchscreen is not responding. wat do?
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
If it didn't work the below thread might give you some idea
http://forum.xda-developers.com/showthread.php?t=1927058
hit thanks if I've helped!
sent from my smultron
you can do this to fix your touch....
flash an stock 2.3.4 firmware..
flash a "ported rom"on your device
flash stock firmware again
metalrawk said:
I recently installed LWW rom on my mini by mistake, now its touchscreen is not responding. wat do?
Click to expand...
Click to collapse
hey are that 'shapshifter' guy from se-nse right...
as i told follow that tut...
the same problem happened to my friend 'shprakash' he followed every thing in that tut..but it didnt work..
finally ended up replacing the digitizer ...which is around 2000INR
Hello ppl thanks for your time read this to solve my prob. :angel:
So today i got a st15i and install a custom rom viper xperia v8 and for some reason when boot the touch screen was not working properly, i tried to go to cwm and restore my back up but it bootloop and then i flashed the ics .587 and the touchscreen(+touchbutton) not working, and i am stucked here i can only use flashtool i dont have cwm or root to try these methods on forum.. any idea pls pls pls pls???
Edit: i unlocked bootloader,flash rage v3 kernel and i am trying the method with .62 fw and hybrom, when i boot hybrom the touch work a little but when i flash .62 dont work.... any idea?
Cmon guys i see a lot of ppl have this problem.. we need a expert to make a flashable file to fix this problem... anyone????
I have same problem that my sony Xperia mini (St15i) touch screen is not working on ICS custom and stock roms (i have installed 6 different custom roms including stock ICS rom but my touch screen did not worked), only this " Xperia Nexus v4.5 " worked for me and is running fine on my ST15i. below is its thread, you can install this rom and i hope that it will work for you.
http://forum.xda-developers.com/showthread.php?t=2120417
Aashirg said:
I have same problem that my sony Xperia mini (St15i) touch screen is not working on ICS custom and stock roms (i have installed 6 different custom roms including stock ICS rom but my touch screen did not worked), only this " Xperia Nexus v4.5 " worked for me and is running fine on my ST15i. below is its thread, you can install this rom and i hope that it will work for you.
http://forum.xda-developers.com/showthread.php?t=2120417
Click to expand...
Click to collapse
Thank's for sharing, i tried but no luck!!
Anyway FINALY i used this method and its WORKING
When I thought I was about to sell my phone for parts (from almost all .ftf's and kernels- One final attempt:
--I started with a "locked bootloader" - forced pushed cwm-reg.img and installed superuser.apk - Here
--When I got the chance of going into recovery...
Wipe/Factory reset
Wipe Cache
Format System
Format Data
Format Cache
--Flash .62 ftf
--Fastboot XKernel
Boot into recovery
--Installed hybrom v10 (twice - what? I was hopeless and with a little faith made the 2nd install anyway)
--Booted into hybrom v10 (no response whatsoever)
Pulled battery (no way of turning it off)
--Flashed .62 ftf again and prayed (preparing to leave home and go to the nearest used-phone shop to sell my ST15i)
@ First boot everything was back to normal...
After 2 days I have a smile on my face...
Click to expand...
Click to collapse
Original post here!!
Your touch screen was not working on any rom ( ICS or GB) ????? because i have touch screen problem only on ICS roms and on GB rom it is working perfectly. will the above mentioned solution work for ICS roms as well???