My HP Touchpad on ICS (Cyangenmod 9) is refusing to start. Keeps flashing the message "Unfortunately Trebuchet stopped working" and when i touch on ok, the message pops up again.
this is the sequence in which it happened:
My daughter was playing Temple Run and the TP shut down because the battery was over.
I plugged it into the wall charger and after about 10 minutes of charging (the screen showed a big battery symbol with a red line beside it)
and then the boot screen came on, with cyanogen mod highlighted and in few seconds started to boot into ICS, and the screen showed - Cyanogen MOd 9 Loading - and stayed like that for 45 minutes;
I felt it got stuck and held the power button and vol up for a few seconds to reboot and this time it reboot with the Android icon with lots of blue around it. And thats when it started flashing the message "Unfortunately Trebuchet stopped working"
also the system tray (?) lower right corner, flashed a popup saying the sd card is damaged; and when touched it , showed the message 'sd card damaged - format or cancel- touch on either one and the Trebuchet message comes on...
went back to the boot screen and tried to boot into webOS, but somehow it jumped back into cyanogen mod.
i need help. do i need to reinstall the entire cyanogen mod package again and if yes, how do i do it?
and where is the sd card located? is it user accessible?
thanks
akarri said:
My HP Touchpad on ICS (Cyangenmod 9) is refusing to start. Keeps flashing the message "Unfortunately Trebuchet stopped working" and when i touch on ok, the message pops up again.
this is the sequence in which it happened:
My daughter was playing Temple Run and the TP shut down because the battery was over.
I plugged it into the wall charger and after about 10 minutes of charging (the screen showed a big battery symbol with a red line beside it)
and then the boot screen came on, with cyanogen mod highlighted and in few seconds started to boot into ICS, and the screen showed - Cyanogen MOd 9 Loading - and stayed like that for 45 minutes;
I felt it got stuck and held the power button and vol up for a few seconds to reboot and this time it reboot with the Android icon with lots of blue around it. And thats when it started flashing the message "Unfortunately Trebuchet stopped working"
also the system tray (?) lower right corner, flashed a popup saying the sd card is damaged; and when touched it , showed the message 'sd card damaged - format or cancel- touch on either one and the Trebuchet message comes on...
went back to the boot screen and tried to boot into webOS, but somehow it jumped back into cyanogen mod.
i need help. do i need to reinstall the entire cyanogen mod package again and if yes, how do i do it?
and where is the sd card located? is it user accessible?
thanks
Click to expand...
Click to collapse
The sd card is a virtual one, in other words, there is no sd card. It's created when installing android.
I recommend leaving the TP plugged into the charger for at least a few hours, then try booting again. If the problem persists, you might have to doctor. It's not hard. Go to the webos nation forum and search for webOS doctor and follow the instructions. It might not be a bad idea to uninstall android, then do a new, clean install. You should be good to go. BTW, try to not let the battery run down all the way. As you can see, it can cause all sorts of problems.
Good luck.
thanks
chicle_11 said:
The sd card is a virtual one, in other words, there is no sd card. It's created when installing android.
I recommend leaving the TP plugged into the charger for at least a few hours, then try booting again. If the problem persists, you might have to doctor. It's not hard. Go to the webos nation forum and search for webOS doctor and follow the instructions. It might not be a bad idea to uninstall android, then do a new, clean install. You should be good to go. BTW, try to not let the battery run down all the way. As you can see, it can cause all sorts of problems.
Good luck.
Click to expand...
Click to collapse
Thanks; I have already cleared most of the problem by using webOS Doctor; I think I need to do a clean install, for that i have to uninstall cm9 by using the ACMEUninstaller, right? i am a noob, so...
will that help me recover some space, because now with just webOS on the HP Touchpad, I have just about 5 gigs?
akarri said:
Thanks; I have already cleared most of the problem by using webOS Doctor; I think I need to do a clean install, for that i have to uninstall cm9 by using the ACMEUninstaller, right? i am a noob, so...
will that help me recover some space, because now with just webOS on the HP Touchpad, I have just about 5 gigs?
Click to expand...
Click to collapse
Yes use ACMEUninstaller to remove cm9 just do exactly what you did to install but replace ACMEInstaller2/3 with ACMEUninstaller.
For guidance my 32gig Tablet shows a hard drive size 27.2 with just webos and 25.5/25.4 with Android installed the lower figure using ACMEInstaller3 as it takes an extra 100mb .
akarri said:
Thanks; I have already cleared most of the problem by using webOS Doctor; I think I need to do a clean install, for that i have to uninstall cm9 by using the ACMEUninstaller, right? i am a noob, so...
will that help me recover some space, because now with just webOS on the HP Touchpad, I have just about 5 gigs?
Click to expand...
Click to collapse
Read this thread : http://forum.xda-developers.com/showthread.php?t=1426244 (read the whole thread).
This fixed my "lost space" problem. I had about 16gb missing, but this got the partitions 'right' Good luck.
Related
Gtab- Stock 3358.
Previously I had Stock 3358 and rothnics enhancement pack. I installed an app from the market. As soon as I started the app the gtab screen went blank. Then the TapnTap logo as if it was rebooting then within 2 sec I was back at the home screen. If it rebooted it was a heck of a fast reboot.
then I started getting the error. Everything except stock email and settings work. But the error message pops up every few seconds. I can't go to settings and wipe. So I attempted to install stock 3358. it went fine but problem persist. Still can;t go to settings to check version or do a afactory reset.
Any and all help is appreciated.
+1
I had same problem and after debating the right courses to take, I nvflash'ed the device and started over again.
Still would like to understand that caused that error ?
This usually occurs as the result of contacts in your contact folder with blanks in the name fields. Delete any entries with blanks and you should be good to go.
PS. You will get faster resolution if you search before posting as this has been asked and answered several times in past week.
I have same problem...."The process android.process.acore has stopped unexpectedly. Please try again"
I went into my google account, deleted or put names in contacts that didnt have names, rebooted and still having problem. I tried going into the data/data file, but there was no data file to delete as indicated on other threads. There is not an easy to find thread for this problem. Please help or at least direct me.
Thanks!!!
I never had any contacts saved. Regardless I cannot even open the contacts folder to add/delete anything.
I am having problems with, email, contacts, settings. as soon as I attempt to open any of the above it gives the FC message and takes it back to home.
On the other hand I called Gtab support. As soon as I told the probelm the lady asked me if I could go to settings. Once I told her no I cannot she said you have to send the unit back for repair. She said that she helped another individual yesterday with exact same issue.
On aside note I was able to delete most of my apps using ES file explorer.
@Bekit @rothnic or other senior members is there any solution beside nvflash. I am a newbie.
thanks.
I had the same problem in February and fixed it by searching this forum and finding pieces to put together a solution. The rest of this message is what I posted back on 2/24/11. I think the important part is to repartition your SD card and clear all user data. I have had no problems since I did this fix.
Good luck.
I have had my GTablet since early December and have been running the Stock Enhancement since early January. I have had no problems except for a very occasional unexpected stop. It was never a real problem.
Yesterday I started getting the android.process.acore error literally anytime I tried to use any application. To my knowledge, I had not installed anything recently that would account for this.
The good news is that I followed multiple threads here and came up with what seemed to be a reasonable solution.
I installed Clockwork and reset the partition to 2048/0 as suggested by several posts. I also cleared everything that I could clear using their menu.
Then I installed NVFlash which I believe put me back to the plain vanilla factory OS. (I also think this wiped out Clockwork Mod but I'm not positive.)
I got the "update available" message and did the OTA update of the OS.
Then I installed the TnT Stock Enhancement update and applied the Market Fix.
Everything seems back to normal now.
I want to thank all of the forum members who posted the various instructions that allowed me to piece together this solution.
I realize that not everyone has the same issues when problems occur so there isn't one single fix that is right for everyone. I didn't really understand that until I had this problem. I feel lucky that I've had relatively no problems.
I have to admit that I'm looking carefully at the Motorola Xoom because I suspect it has a much more stable hardware/software infrastructure but I would rethink that if the Viewsonic folks would be more forthcoming about their plans to support upgrades for the GTab. I can live without 3G if I have stability.
Thanks again to all of you experts out there in xda-developers forumland.
Stuck SD card
I am having the same problem and tried to do the restore from the SD card and now the card is in the slot and I cant access the settings to eject it. to run the clockwork mod is there any way to force it to boot the clockwork mod?
For me, Clockworkmod "wipe data/factory reset" eliminated the pesky force close message about android.process.acore that several of us seem to have. NVflashing & Contacts data field corrections did not work for me. The problems seemed to come up after downloading an app from market.
Running VEGAn 1.00 beta 5.1.1 supplement, and happy!
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
I called CS yesterday. They help me delete most of the apps that I downloaded to see if that will fix the issue. That also helped in eliminating any personal data left behind in case I have to RMA the unit.
that makes my tablet completely stock. I don't have market any more. So can't get clockwork rom manager etc. Bigger probelm is the onscreen keyboard doesn't work either gives the error message.
I did some reading on how to NV Flash the device. Still trying to understand the process.
I have two options
1. NV flash the device and hope that everything still works.
2. I bought sears insruance. Just return the device and then be done with it.
Any help is much appreciated.
My experience level is limted to flashing stock and enhancement packs using the Power and + buttons.
You don't want to use the clockwork in Rom Manager. It doesn't work for the G Tablet.
Here are a couple other options off the top of my head...
1) cwmod for install from Micro SD card http://forum.xda-developers.com/showthread.php?t=865245
2) Try calkulin's format all http://forum.xda-developers.com/showthread.php?t=985705
flanghor said:
For me, Clockworkmod "wipe data/factory reset" eliminated the pesky force close message about android.process.acore that several of us seem to have. NVflashing & Contacts data field corrections did not work for me. The problems seemed to come up after downloading an app from market.
Running VEGAn 1.00 beta 5.1.1 supplement, and happy!
Click to expand...
Click to collapse
same thing with me. I downloaded a few apps and then I got it. Did the data wipe thing. Came back in and I am still getting the error. Not happening every 5 seconds, but still getting it.
okay, this is strange. I did the data wipe and I was still getting this error. After doing the market fix and got all my downloads available, I noticed that I am only getting this error when I hit the HOME button.
I hit the Home button and the error comes up, then the Android Market comes up. This only happens now when I hit the Home button. Error, Market comes up and I have to hit the Home button again to get home.
HELP!
only the home button
confirmed. Working on this the last 30 minutes, I am only getting this error when hitting the home button.
@ K J Rad
I downloaded caulkins format all zip. Now this may sound a silly question. Do I flash it like changing its name to update.zip and include the recovery file?
2nd question is if I am able to flash it successfully can I install the stock rom?
hipBob said:
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
Click to expand...
Click to collapse
Just wanted to say this single step worked for me as well.
Ok. Finally got rid of the problem.
First I attemted NVFlash. After some intial strugle setting up the drivers etc on windows got it to work. Everything worked but still had the exact same process.
B/w I noticed superuser still there. I thought NV Flash will bring it to out of box. Used Bekits image.
After some more reading took the plunge and did CWM internal. Dide wipe data. Rebooted and got it working again.
Again pardon my ignorance but do I have to manually update to 3358. And if I do it go stock would it get rid of CWM. How do i get it off the machine?
I would like to prepare for the OTA.
Please advise.
B/w it was fun going through the process.
Ok. Finally got rid of the problem.
First I attemted NVFlash. After some intial strugle setting up the drivers etc on windows got it to work. Everything worked but still had the exact same process.
B/w I noticed superuser still there. I thought NV Flash will bring it to out of box. Used Bekits image.
After some more reading took the plunge and did CWM internal. Dide wipe data. Rebooted and got it working again.
Again pardon my ignorance but do I have to manually update to 3358. And if I do it go stock would it get rid of CWM. How do i get it off the machine?
I would like to prepare for the OTA.
Please advise.
B/w it was fun going through the process.
Glad you got it working. Installing the stock 3588 update will replace the bootloader and removes CWM. That should leave you as close to real stock as you can get.
Oh, and welcome aboard ;-)
hipBob said:
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
Click to expand...
Click to collapse
Thank you very much, that was an incredibly painless fix. Worked on TnT-Enhanced v3.1.4b
I just uninstalled Android through ACME Uninstaller and I full erased my touchpad + i web os doctored it. Is the uninstaller supposed to boot up every time i restart my touchpad? because everytime i shut it down or restart it, some commands pop up and i believe it is the uninstaller but i don't know what else it could be. I deleted everything that should've been deleted also.
Is this normal for WebOS to boot with those commands all the time? The code flashes by for a minute and then it loads normally. I am pretty sure i deleted everything i could
thedark1337 said:
I just uninstalled Android through ACME Uninstaller and I full erased my touchpad + i web os doctored it. Is the uninstaller supposed to boot up every time i restart my touchpad? because everytime i shut it down or restart it, some commands pop up and i believe it is the uninstaller but i don't know what else it could be. I deleted everything that should've been deleted also.
Is this normal for WebOS to boot with those commands all the time? The code flashes by for a minute and then it loads normally. I am pretty sure i deleted everything i could
Click to expand...
Click to collapse
Once installed you should only see moboot menu (Options to boot into webos, recovery, cyanogen etc) initially with cyanogenmod being the default selected.
If this is not what your reffering to i would try wiping the cache, dalvik and factory reset then reflashing the ROM. You should also check the MD5 of the download to confirm you have a good file
Hope this helps
thats not what im referring to. I have uninstalled all of android by utilizing the uninstaller. But what happens is the uninstaller keeps running every time i do a device restart for the touchpad or i turn it off and then on. I don't know if that is normal for it to do that.
thedark1337 said:
thats not what im referring to. I have uninstalled all of android by utilizing the uninstaller. But what happens is the uninstaller keeps running every time i do a device restart for the touchpad or i turn it off and then on. I don't know if that is normal for it to do that.
Click to expand...
Click to collapse
I actually acmeuninstalled last night and I'm not seeing the "code" your speaking of, maybe if you get what it says it would be more help, get a picture or video. But if your touchpad is running fine I wouldn't worry to much since you can always webdoctor it back to life if the worst happens.
Sent from my Touchpad using Tapatalk
I have done the same and I did not see any lines of code. A picture or video would help. Or tell us what it says when it boots up
Sent from my MB855 using XDA App
thedark1337 said:
I just uninstalled Android through ACME Uninstaller and I full erased my touchpad + i web os doctored it. Is the uninstaller supposed to boot up every time i restart my touchpad? because everytime i shut it down or restart it, some commands pop up and i believe it is the uninstaller but i don't know what else it could be. I deleted everything that should've been deleted also.
Is this normal for WebOS to boot with those commands all the time? The code flashes by for a minute and then it loads normally. I am pretty sure i deleted everything i could
Click to expand...
Click to collapse
You didn't put the uninstaller on the touchpad itself did you? It's supposed to set in the same Palm file on your computer as Acmeinstaller and is used the same way.
Any reason why you guys remove Android?
sweetboy02125 said:
Any reason why you guys remove Android?
Click to expand...
Click to collapse
i did it to start fresh with xron's latest build. Leo is magical with CM7 port.
i can barely read the commands its running but it seems like its reverting the touchpad back to pre android settings. It runs by the code for 30 seconds and then it loads webos.
I saw some of them as setting the cpu speed, the codec sample rate, deleting files that aren't even on my touchpad. I've doctored and full erase yet it persists. Hm..
Did you try to install ACME again?
thedark1337 said:
thats not what im referring to. I have uninstalled all of android by utilizing the uninstaller. But what happens is the uninstaller keeps running every time i do a device restart for the touchpad or i turn it off and then on. I don't know if that is normal for it to do that.
Click to expand...
Click to collapse
what picture do see on top, if its penguins then it android, if its planes then its webos
i don't see any planes or android but i do see that first its running a set of commands to boot into webos and then logging into webos. the HP logo shows up for a split second before them and then after the commands the HP logo shows up once more and loads like normal.
thedark1337 said:
i can barely read the commands its running but it seems like its reverting the touchpad back to pre android settings. It runs by the code for 30 seconds and then it loads webos.
I saw some of them as setting the cpu speed, the codec sample rate, deleting files that aren't even on my touchpad. I've doctored and full erase yet it persists. Hm..
Click to expand...
Click to collapse
Did u install preware on the webos or overclocked it? That might be the problem
shywolf28 said:
Did u install preware on the webos or overclocked it? That might be the problem
Click to expand...
Click to collapse
Can anyone post a link to ACMEUninstaller please?
phonecurious said:
Can anyone post a link to ACMEUninstaller please?
Click to expand...
Click to collapse
check your pm.
life_420 said:
check your pm.
Click to expand...
Click to collapse
Can you send me the link for ACME Uninstaller? I found dead links everywhere. Thanks in advance
here is the acmeuninstaller cyanogenmod had on their alpha 3.5 page of cm7
i have done nothing to it except upload to a working link.
ACMEuninstaller
If this not allowed let me know and i will delete and remove the link.
enjoy and hit the thanx button.....
life_420 said:
here is the acmeuninstaller cyanogenmod had on their alpha 3.5 page of cm7
i have done nothing to it except upload to a working link.
......
If this not allowed let me know and i will delete and remove the link.
enjoy and hit the thanx button.....
Click to expand...
Click to collapse
Thanx button hit! You made my day
(First I wanted to say, you guys all rock. I owned a Nook Color for awhile and had cyanogen mod on it and it was absolutely awesome. I do understand the basics of how to install it. I ended up selling my old nook (was low on money) and recently began to miss it, so I picked up a 8gig Nook Tablet running 1.4.2. I tried to figure this out on my own, but after 8 hours of reading threads and not having any luck I decided to finally post a thread asking for help )
Problem:
I have an 8gig Nook Tablet (brand new from the store) running 1.4.2. I would like to install Cyanogen Mod 7 on it since the stock O.S. is ... well... terrible.
To start, can it currently be done with that tablet at all? Should I even attempt to do it or wait until everything is more stable?
I did manage to get it rooted using this guys method. Next, I burnt a 4gig SD card based off Indirect's thread so I could boot CWM from it. I was intending on installing CM7 from this thread. I re-sized the 70 mb partition thing using EASEUS Partition Master, stuck the CM7 files in the directory and set about attempting to set it up
My problem is I can't even get CWM to boot. I power it on, it goes straight to the stock O.S. I hold the N button with power button, and it gives me a prompt for a factory restore (which is nice, better than the 'interrupt boot 8 times b.s.). I plug the cable in, unresponsive to anything until I take the card out
Am I doing something incorrectly, or maybe using the wrong files? If I can't install CM7 for some reason, is there any way to make the stock O.S. function better? I can't view apps without going to search->play store-> finding them, which is a pain.
Thanks so much for any help!
Obviously, I'm new to this site, as I imagine most are when they have their first big issue.
Right off the bat, I want to admit that this is solely my fault, and I have been trying to fix it for the past day... To make matters worse, the phone was a gift from my wife for our anniversary, so, I feel pretty bad about it...
The situation:
I rooted my phone yesterday with RazrBlade. I had to do a factory reset to get it to stick, but that was fine. I then installed Boot Menu Manager. I set up the necessary partitions, system_3 system.img (300mb), cache.img (300mb), and data.img (2Gb). I realize I probably should have given system more room... but I didn't think that was app related. I then flashed Liquid-JB-v2.8-OFFICIAL-spyder and gapps-jb-20130301-signed from goo.im. It didn't tell me the system partition was out of memory, so I assumed (like a fool) that everything was OK...
After a few reboots to the wrong system, namely the stock system, I decided to go into BMM and change the default to system_3, and then I did the dumbest thing possible: I thought to myself, "Wow, it would be a pain to see this bootloader each time my phone reboots. I'll turn the delay to 0!" So... I did...
The Problem:
My phone now boots straight past the recovery to system_3, which seems to have no space allocated for applications at all, including system ones. I attached a picture of the storage details. It goes through the setup process each time I reboot, and wipes any changes I make. I can't download apps, and I can't install them via APK because the phone thinks there is no space left. I don't have BMM installed in this system so I can't turn the delay up, to my knowledge. There is no file explorer on this system, so I can't go into the app files directly. I have tried connecting with "Android Commander" but it doesn't want to detect my device. I installed the ADT bundle for windows to get the usb driver, but still nothing... I also tried a factory reset again, but that does the same thing as rebooting for me now.
The Challange:
To my knowledge, I'm out of options, but I know most of you guys do this to see what you are capable of. I'm sure you've dealt with bigger issues. Can anyone help? Would Verizon techs be smart enough/have the right software to actually reset the phone?
Thanks!
RustyRazr said:
Obviously, I'm new to this site, as I imagine most are when they have their first big issue.
Right off the bat, I want to admit that this is solely my fault, and I have been trying to fix it for the past day... To make matters worse, the phone was a gift from my wife for our anniversary, so, I feel pretty bad about it...
The situation:
I rooted my phone yesterday with RazrBlade. I had to do a factory reset to get it to stick, but that was fine. I then installed Boot Menu Manager. I set up the necessary partitions, system_3 system.img (300mb), cache.img (300mb), and data.img (2Gb). I realize I probably should have given system more room... but I didn't think that was app related. I then flashed Liquid-JB-v2.8-OFFICIAL-spyder and gapps-jb-20130301-signed from goo.im. It didn't tell me the system partition was out of memory, so I assumed (like a fool) that everything was OK...
After a few reboots to the wrong system, namely the stock system, I decided to go into BMM and change the default to system_3, and then I did the dumbest thing possible: I thought to myself, "Wow, it would be a pain to see this bootloader each time my phone reboots. I'll turn the delay to 0!" So... I did...
The Problem:
My phone now boots straight past the recovery to system_3, which seems to have no space allocated for applications at all, including system ones. I attached a picture of the storage details. It goes through the setup process each time I reboot, and wipes any changes I make. I can't download apps, and I can't install them via APK because the phone thinks there is no space left. I don't have BMM installed in this system so I can't turn the delay up, to my knowledge. There is no file explorer on this system, so I can't go into the app files directly. I have tried connecting with "Android Commander" but it doesn't want to detect my device. I installed the ADT bundle for windows to get the usb driver, but still nothing... I also tried a factory reset again, but that does the same thing as rebooting for me now.
The Challange:
To my knowledge, I'm out of options, but I know most of you guys do this to see what you are capable of. I'm sure you've dealt with bigger issues. Can anyone help? Would Verizon techs be smart enough/have the right software to actually reset the phone?
Thanks!
Click to expand...
Click to collapse
I like to see you getting out of that one anyway,have you tried switching default storage? I mean try that I think that way the phone "thinks" your external sd is your internal memory and vice versa that might give you a chance to install BMM or a root explorer and debloat system..you got nothing to loose give it a try man,go to settings/advance and switch default storage,good luck.
Sent from my XT910 using xda premium
FIXED!
AztekSoul said:
go to settings/advance and switch default storage,good luck.
Click to expand...
Click to collapse
Unfortunately, I tried that. The problem was that it requires a reboot, which wiped any settings
HOWEVER, the fix was along that line, it just required me to go into android shell and tell it manually.
I followed these steps to make the phone install to the SD card (internal phone app partition really) by default (because I'm a newb, I can't post links, so just google "how-to-install-android-apps-to-the-sd-card-by-default-move-almost-any-app-to-the-sd-card").
After doing so, I still had a problem downloading BMM from the market, but I think that was due to the market being outdated and troublesome, so I had to find an apk version instead.
I installed it, and restored the boot delay to 30 secs.
I then immediately booted to system_1 to feel safe.
I may try loading the Liquid Smooth rom again once I've fixed the partitions, but I will NEVER turn BMM's boot delay to 0 s EVER again...
Boy, have I messed myself up. I've successfully rooted my Nook Tablet with CM-7 three times -- just for the practice. The last time I decided to get rid of apps, using Titanium Backup. Big Mistake! I started getting the "The application Google services Framework(process com.google.process.gapps) has stopped unexpectedly." I figured I had messed up gapps, so why not reinstall gapps with the gapps.apk? Bigger Mistake!! Now when I boot my Nook -- with or without the sd card installed -- I get a screen with the android avatar in the middle of the screen, and a message at the bottom of the screen which tells me to "Touch the android to begin." The only problem is that touching the android doesn't do anything.
I've re-imaged CM-7 to my sd card, to no effect. Apparently, the Nook, on startup, is going directly to my Nook's internal ROM to boot.
Is there any way out of this "freeze?"
Thanks for any help,
Bob
Problem Solved
Found solution on Nook forum, posted by XDADevelopers member, aspipatel, "[UNBRICK] Your Bricked Nook Tablet." Thank you, aspi.
laubosam