Hi Everyone,
I am using Xperia Neo. My friend helped me in installing custom ics rom from unlocking bootloader step to installing a custom rom.
Now i tried to install a custom rom, but it didnt work even though i followed the right steps.
Now when i tried to switch to the old rom it gives a status 7 error (similar one to this link http://forum.xda-developers.com/showthread.php?t=1805631&highlight=status+7)
From the above thread i got the following steps
Simply flash an official ROM (.ftf) with Flashtool in Flashmode mode;
Flash a correct Kernel (extract it from Cyanogen rom zip, boot.img usually) with Flashtool in Fastboot mode;
Enter recovery CMW;
Perform a full wipe factory reset, and cache wipe nextly;
Finish with applying custom ROM by CWM;
Can someone help me with the first step
Simply flash an official ROM (.ftf) with Flashtool in Flashmode mode;
Is there a thread which has these steps?
Currently I am on a custom kernel and not on the base kernel will that create any problem in doing the first step?
Please help me on this. I am just a beginner.
Thanks in Advance.
goutham0903 said:
Hi Everyone,
I am using Xperia Neo. My friend helped me in installing custom ics rom from unlocking bootloader step to installing a custom rom.
Now i tried to install a custom rom, but it didnt work even though i followed the right steps.
Now when i tried to switch to the old rom it gives a status 7 error (similar one to this link http://forum.xda-developers.com/showthread.php?t=1805631&highlight=status+7)
From the above thread i got the following steps
Simply flash an official ROM (.ftf) with Flashtool in Flashmode mode;
Flash a correct Kernel (extract it from Cyanogen rom zip, boot.img usually) with Flashtool in Fastboot mode;
Enter recovery CMW;
Perform a full wipe factory reset, and cache wipe nextly;
Finish with applying custom ROM by CWM;
Can someone help me with the first step
Simply flash an official ROM (.ftf) with Flashtool in Flashmode mode;
Is there a thread which has these steps?
Currently I am on a custom kernel and not on the base kernel will that create any problem in doing the first step?
Please help me on this. I am just a beginner.
Thanks in Advance.
Click to expand...
Click to collapse
Flashing a .ftf in this case implies that you have to flash just the baseband version. u must have flashed the complete firmware. while flashing new baseband you must exclude the kernel. the .ftf file has to be placed in the C:\Flashtool\firmwares directory. also u have not wiped the Dalvik cache.....
Get the ICS Stock rom from here:
http://forum.xda-developers.com/showthread.php?t=1678690
Flash it via Flashtool with stock kernel.
This will flash your phone to Stock rom.
I have installed the latest flash tool and i have also downloaded the Stock Rom.
Now the problem is the device not getting detected, i tried connecting the device to PC while it is in recovery mode and also when it is inside the OS. It is only getting at a point of time when it OS loads and then it again goes undetected.So I am not able to flash the stock rom. I have also installed the ADB drivers from flash tool.
What can I do now? Please help me out...
svprm said:
Get the ICS Stock rom from here:
http://forum.xda-developers.com/showthread.php?t=1678690
Flash it via Flashtool with stock kernel.
This will flash your phone to Stock rom.
Click to expand...
Click to collapse
Steps to install a Stock Rom:
1.Click on Flash Button..
2.Check on Flash Mode(De faulty on that).
3.Then Select your frimware.
4.Click Ok.
5.Plug the mobile while pressing the Back button.
6.Then it will flash the mobile.
goutham0903 said:
I have installed the latest flash tool and i have also downloaded the Stock Rom.
Now the problem is the device not getting detected, i tried connecting the device to PC while it is in recovery mode and also when it is inside the OS. It is only getting at a point of time when it OS loads and then it again goes undetected.So I am not able to flash the stock rom. I have also installed the ADB drivers from flash tool.
What can I do now? Please help me out...
Click to expand...
Click to collapse
Maybe u should check first your phone led if there's red light blinking means you are out of battery. Try to charge ur batt. for several hours or just borrow an full charged batt. from ur friend and flash it using flash tool or SUS.
Sent from my MT25i using xda app-developers app
Related
2 days ago I've tried to flash a ROM on my Live WT19i: i've unlocked the bootloader, rooted the phone, installed CWM recovery and then flashed the RC3 Android 4.0 ROM. I haven't flashed the custom kernel suggested in the thread of the rom, so now my phone is stuck at SE logo every time I switch it on.
As i've read in another thread, i've downloaded flashtool and tried to flash the kernel on, but it says that "the phone is not rooted".
So i've tried to flash the original firmware (.58, i have never upgrade it up to .62) and then i'm going to re-flash the ROM(this time being more careful to follow all the steps), but when I try to flash the firmware on, Flashtools says that "the drivers are not installed, you can find them in the drivers folder of flashtool". Over there ther's only an EXE file, but the situation isn't changed.
Now: Where can I download this drivers? But expecially,what I have to do to make my phone came on again?
THANKS TO EVERYONE IS GOING TO ANSWERING ME
(In other threads I have found something similar, but not really useful for my problem, so please don't tell me that there is always a thread for this, thanks)
try this the tool posted at this thread.
this thread also has a download link for all the drivers you will need.
have used this myself for unlocking bootloader and flashing kernels.
after you flash the kernel for the ICS rom,
boot to cwm, then install ICS rom again.
dont forget to wipe data and clear cache and dalvik before installing new rom.
melander said:
try this the tool posted at this thread.
this thread also has a download link for all the drivers you will need.
have used this myself for unlocking bootloader and flashing kernels.
after you flash the kernel for the ICS rom,
boot to cwm, then install ICS rom again.
dont forget to wipe data and clear cache and dalvik before installing new rom.
Click to expand...
Click to collapse
The problem is that flashtool (and even this tool you have suggest to me) says "FAILED (remote: The Device must be rooted first)" when I try to install the kernel on. Is for that reason that i've thinked to flash the original firmware on and then re-root the phone!
What do you think about this? Thanks.
Putix33 said:
The problem is that flashtool (and even this tool you have suggest to me) says "FAILED (remote: The Device must be rooted first)" when I try to install the kernel on. Is for that reason that i've thinked to flash the original firmware on and then re-root the phone!
What do you think about this? Thanks.
Click to expand...
Click to collapse
According to me, kernel installation requires only unlocked bootloader and having phone in fastboot mode. Root is not needed, because kernel doesn't use ROM files at all.
Hello, I own an Xperia Mini ST15i, and I have successfully unlocked the bootloader and rooted the phone. Now I would like to flash a custom kernel and a custom ROM. I have read really a lot on this forum, but "the more I read the more I am confused". I have never done this before (aside from rooting my Nook Simple Touch with Touchnooter). Thats why I need your confirmation about the steps I am going to do next on my phone, because I don't want to mess things up.
This is my current phone configuration:
Kernel version: 2.6.32.9-perf [email protected] #1
Build number: 4.1.B.0.431
I would like to flash this kernel: http://forum.xda-developers.com/showthread.php?t=1709032
and this ROM: http://forum.xda-developers.com/showthread.php?t=1705255
I downloaded all the files,including the new wifi modules, and copied them into the SD card of the phone. At this point I am asking for help, how to proceed, step by step.
On my computer, I have installed the Android SDK and Flashtool 0.9, on the phone I installed the ROM manager from Clockworkmod, premium version.
Thank you for your help.
hmmm...since you have download all files i suggest you flash the kernel first using flashtool....it got per-rooted and CWM along with it...this can help you alot....
after flashing kernel you can boot into CWM, make backup before you start flashing ROM that you have download....
Flash Kernel
Go To CWR
Do Wipe for all Data/Cache/System (From Mount Partitions Entry)
Do Wipe for Dalvik Cache (from Advanced Entry)
Flash the Rom
Flash Fixes and AddOns if Your Device requires any
Then Flash the WiFi Modules
Un.Knowen said:
Flash Kernel
Go To CWR
Do Wipe for all Data/Cache/System (From Mount Partitions Entry)
Do Wipe for Dalvik Cache (from Advanced Entry)
Flash the Rom
Flash Fixes and AddOns if Your Device requires any
Then Flash the WiFi Modules
Click to expand...
Click to collapse
Thank you, will try tomorow
Edit: the file containing the new kernel has got a .img sufix, instead of .zip. Is CWM able to flash .img files? And if so, what is better, flashing it in CWM recovery in the phone, or through Flashtool 0.9?
Martin2603 said:
Thank you, will try tomorow
Edit: the file containing the new kernel has got a .img sufix, instead of .zip. Is CWM able to flash .img files? And if so, what is better, flashing it in CWM recovery in the phone, or through Flashtool 0.9?
Click to expand...
Click to collapse
yhu flash Kernel [.img] via Flashtool & flash ROM [.zip] via CWM...........Enjoy!!!
Due to an unexpected holiday I postponed the flashing to this weekend. One more question: How do I access the CWM recovery in ST15i? I tried holding volume down button while booting, I tried pressing it constantly, tried to press it while the SONY logo glowed more, but nothing happened. (the kernel is not flashed yet)
Martin2603 said:
Due to an unexpected holiday I postponed the flashing to this weekend. One more question: How do I access the CWM recovery in ST15i? I tried holding volume down button while booting, I tried pressing it constantly, tried to press it while the SONY logo glowed more, but nothing happened. (the kernel is not flashed yet)
Click to expand...
Click to collapse
if you haven't flash the kernel then you cannot boot into CWM yet (unless you have install CWM using other method).....if you already flash the kernel then when your boot the phone, look at the Sony logo and the LED....once the LED is blink (blue colour) then press the volume down to enter CWM....
And if the kernel doesn't use led while seting up try to see with the back key light I think
Cause I know some kernel who doesn't have it
Thank you all for your advice. Kernel and ROM flashed, everything works like a charm.
Martin2603 said:
Hello, I own an Xperia Mini ST15i, and I have successfully unlocked the bootloader and rooted the phone. Now I would like to flash a custom kernel and a custom ROM. I have read really a lot on this forum, but "the more I read the more I am confused". I have never done this before (aside from rooting my Nook Simple Touch with Touchnooter). Thats why I need your confirmation about the steps I am going to do next on my phone, because I don't want to mess things up.
This is my current phone configuration:
Kernel version: 2.6.32.9-perf [email protected] #1
Build number: 4.1.B.0.431
I would like to flash this kernel: http://forum.xda-developers.com/showthread.php?t=1709032
and this ROM: http://forum.xda-developers.com/showthread.php?t=1705255
I downloaded all the files,including the new wifi modules, and copied them into the SD card of the phone. At this point I am asking for help, how to proceed, step by step.
On my computer, I have installed the Android SDK and Flashtool 0.9, on the phone I installed the ROM manager from Clockworkmod, premium version.
Thank you for your help.
Click to expand...
Click to collapse
see here. http://forum.xda-developers.com/showthread.php?t=1799786
Can someone suggest me a kernel and an ics (or jellybean if exists) rom to flash on my xperia mini? I have now ics stock and my bootloader is unlocked. Also i want a guide to help me flash the rom and kernel.
(And also i have a question. Do i need a different custom kernel for every custom rom?)
GiwrgosP- said:
Can someone suggest me a kernel and an ics (or jellybean if exists) rom to flash on my xperia mini? I have now ics stock and my bootloader is unlocked. Also i want a guide to help me flash the rom and kernel.
(And also i have a question. Do i need a different custom kernel for every custom rom?)
Click to expand...
Click to collapse
If you want jelly bean, there's Cyanogenmod 10 by FXP, JellyVanilla and Cyanogenmod 10 by expeacer.
The easiest way to flash a kernel is via flashtool. Just download flashtool and install it. Go to the installation folder and install the drivers. For unlocking bootloader, fastboot should work for you and sdk tools should be installed.
Download the rom you want and the recommend kernel , place the installation zip file on your sd card and go back to flashtool.
In flashtool you click on the flash and select fastboot mode. You turn off your device and hold down the volume up key while connecting to pc. The blue led will light up. Then you select the boot.img you downloaded first. It should be named boot.img, otherwise rename it. Just select it and flashtool will automaticly flash it.
CHECK THE LOG BEFORE YOU PLUG OFF DEVICE!! If there are no errors, just restart device and press volume down again and again. Then you are in cwm. Look in the tutorial how to install the rom what has to be formatted/wiped (like cache or data, etc) and do it like it's explained there. Then select install zip from sd card -> choose zip and install it.
Just reboot and enjoy
After seeing the links of jellybean roms i changed my mind. They have much problems! So could you suggest me an ICS rom?
GiwrgosP- said:
After seeing the links of jellybean roms i changed my mind. They have much problems! So could you suggest me an ICS rom?
Click to expand...
Click to collapse
Expeacer's exmiui.
In this http://forum.xda-developers.com/showthread.php?t=1694027 link it says that it has auto root. This means tha if I flash this kernel then i can flash the ExMIUIv4 2.8.10 rom without rooting?
Miui rom already rooted by default. Such autoroot kernel will give problem with miui rom, u'll get superuser from the kernel and lbe guard from miui at the same time.
I've fixed such bugs in my kernel, try it if u want.
an0nym0us_ said:
Miui rom already rooted by default. Such autoroot kernel will give problem with miui rom, u'll get superuser from the kernel and lbe guard from miui at the same time.
I've fixed such bugs in my kernel, try it if u want.
Click to expand...
Click to collapse
Ok, can you send me a link of your kernel?
So,
1) I flash your kernel using flashtool
2) I download CMW (when i have your kernel and the stock ics)
3) I flash the custom rom
This is all i have to do?
Look in dev subforum, my kernel thread is there.
Anyway:
1- flash kernel. Obviously your bootloader need to be unlock to do this.
2- cwm recovery already in kernel, dont need separate download/install for it. Just boot into cwm after u flashed kernel.
3- do factory reset from cwm, then do wipe dalvik cache.
4- flash rom.
5- reboot into rom.
6- profit
GiwrgosP- said:
Ok, can you send me a link of your kernel?
So,
1) I flash your kernel using flashtool
2) I download CMW (when i have your kernel and the stock ics)
3) I flash the custom rom
This is all i have to do?
Click to expand...
Click to collapse
You don't need to download cwm, it's included in the kernel! Just flash kernel and reboot, while rebooting press volume down again and again!
EDIT:: Sorry, posted at nearly the same time
an0nym0us_ said:
Look in dev subforum, my kernel thread is there.
Anyway:
1- flash kernel. Obviously your bootloader need to be unlock to do this.
2- cwm recovery already in kernel, dont need separate download/install for it. Just boot into cwm after u flashed kernel.
3- do factory reset from cwm, then do wipe dalvik cache.
4- flash rom.
5- reboot into rom.
6- profit
Click to expand...
Click to collapse
What is the name of your kernel to search it? :fingers-crossed:
GiwrgosP- said:
What is the name of your kernel to search it? :fingers-crossed:
Click to expand...
Click to collapse
It's MESA Kernel here.
mihahn said:
It's MESA Kernel here.
Click to expand...
Click to collapse
Thanx!!! If i have a problem I will post!
I'm also a newbie on android. Can you give me the easiest and most effective way on how to unlock bootloader?
Any help will be greatly appreciated. Thanks!
kenstwit said:
I'm also a newbie on android. Can you give me the easiest and most effective way on how to unlock bootloader?
Any help will be greatly appreciated. Thanks!
Click to expand...
Click to collapse
here:
http://forum.xda-developers.com/showthread.php?t=1560613
everything is explained there. After unlocking your BL, flash a custom kernel RAGE KERNEL is my favorite as of now. If it gets into bootloop, meaning, your phone enters the boot animation but cannot get into the home screen, just make a full wipe in CWM. Then reebot. Works 100% with me!
kenstwit said:
I'm also a newbie on android. Can you give me the easiest and most effective way on how to unlock bootloader?
Any help will be greatly appreciated. Thanks!
Click to expand...
Click to collapse
You can unlock your bootloader officially,but you will lose your "DRM" . As a result, "track ID" and some features of "Facebook inside xperia" will never work again.Unlocking bootloader via "test point method" is somewhat hard.But it is the best way.That is how I've unlocked mine..!!
http://forum.xda-developers.com/showthread.php?t=1730874
I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
You forgot to install the kernel which was present inside the zip.
svprm said:
You forgot to install the kernel which was present inside the zip.
Click to expand...
Click to collapse
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
aashishbhargav said:
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
Click to expand...
Click to collapse
It should be inside the zip as the op said in Neo V thread of PAC.
If you found it, do everything again. Here you got a how to (its for ray and arc but works for you to):
http://forum.xda-developers.com/showthread.php?p=33572615
dont forget to hit thanks for information, especially to op of named threads
best regards
Just change kernel.The Kernel inside .zip(Haida PAC JB ...).U have to install it with Fastboot method or flashtool software...please read carefully man....
the kernel is built-in with Recovery...
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
factory reset and wipe all will help u
same problem
aashishbhargav said:
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
Click to expand...
Click to collapse
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Flash whole stock firmware with flashtool so you are able to boot phone.
Then when you will know the right steps, put rom .zip into sd, flash the right kernel and finally install rom via cwm following dev's instructions.
To flash a custom kernel you need unlocked bootloader.
Sent from my MT15i using xda app-developers app
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
you flashed .431 kernel but u had to flash kernel from inside zipped ROM file (img file)
How to Flash PACman ROM (first time)
1 - MAKE BACKUP
2 - download rom zip file, store it somewhere on your SD card (I have a "FlashFiles" folder)
3 - copy boot.img from zip to pc, where you can find it
4 - flash kernel in ROM zip file in fastboot mode
5 - reboot into recovery
!! did you make a backup ??
6 - flash ROM
7 - flash gapps (or inverted gapps if you want)
8 - factory reset
9 - wipe cache
10 - wipe dalvik cache
11 - flash any other zip's you need/want to (e.g. wifi modules if you usin other kernel as in the zip)
12 - reboot
13 - enjoy
14 - click on THANKS button in szl's Original Post
aashishbhargav said:
I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
Click to expand...
Click to collapse
I happened to soft-brick my Neo V few days back after installing a custom ROM. Please read on to see what helped me get my Neo V up and running again.
If your phone is stuck at SONY logo, I doubt it will go into CWM recovery mode either. I had tried flashing stock kernel through Flashtool, and also tried the FOTA-Unbrick method via flashtool, but even that didn't help. Finally, I used the "repair" option in PC Companion which flashed Stock ICS ROM on my Neo V (however, all data on phone's internal memory was lost and my phone had to e rooted again). But at least my phone was recovered. Hope this will guide you.
Flashing PAC man ROM
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
Please read carefully :
U have to have a rooted and bootloader unlocked in phone to flash ROMs (OBVIOUS )
1)Copy the contents to your SDCARD of phone (ROM ZIP File + gapps ZIP)
2) Extract only the boot.img from the ROM zip to some location in your PC
3) Use Flashtool to flash the boot.img (FIRST THING TO DO)
3.a) Select Fastboot mode from flashtool
3.b) While the phone is connected, Click Fastboot phone using ADB.(Phone will restart and blue led will glow showing its in fast boot mode)
3.c) Now select the option, select kernel to flash in the window and chose the boot.img that is in the PC.
Now the flashtool automatically flashes the boot.img(which has the kernel included).
Unplug from PC and try to reboot.. On booting enter CWM mode and flash the ZIP already placed in the SDCARD(Ensure to follow the appropriate post to follow steps like clearing cache\Dalvik and system etc..).
HAPPY FLASHING
NEO V | PAC MAN 18
Hit Thanks if my words lightened you hair :highfive:
superb PRAVIN89 i think u r a teacher
superb Xplaination
---------- Post added at 01:34 AM ---------- Previous post was at 01:30 AM ----------
superb PRAVIN89 i think u r a teacher :victory::victory::victory::victory::victory:
superb Xplaination
@Sam: Lol. Thanks.. And Nope I'm not a teacher. ... Never had that thought too
Hit thanks if helped
Sent from mt11i
Kuhhan said:
download link..
Click to expand...
Click to collapse
Which link are you looking for? Download link is in first post of op
Sent from my Galaxy Nexus using Tapatalk 2
I think he's just spamming to get to post in Development section
Sent from my MT11i using xda premium
Hi everybody, I've just rooted, installed CWM and flash experience v2.1 and everything worked.
Than I flashed AC!D, wiped, then flashed Cybeshot 4, wiped, then flashed cybershot 5. After that I rebooted and from that moment it is in bootloop. I've already, wiped and reflashed the ROM, but it continues to reboot and a couple of times also the AROMA installer got stuck.
I really need help. What can I do to fix it? I mean, there's no reason why it shouldn't work after the flash, right?
Wipe everything (data system etc etc) then flash some ics kernel.. Then flash official ics .54ftf... This should work:thumbup:
Flash official ics firmware using flashtool
rakz992 said:
Wipe everything (data system etc etc) then flash some ics kernel.. Then flash official ics .54ftf... This should work:thumbup:
Click to expand...
Click to collapse
I've got a .10.ftf and a .54.ftf kernels. I've created a zip for each other, then selected install zip form sd card in CWM, but it says installation aborted. Why? What's wrong now?
Mokiwipeout said:
Flash official ics firmware using flashtool
Click to expand...
Click to collapse
I cannot flash via flashtool because I can only work in CWM and flashtool doesn't recognize the phone in that modality.
You mean to say flashtool doesn't recognise you're mobile?? In that case.. You are missing some flashtool drivers.. You'll find them in /flashtool/drivers/ whichever folder you've installed flashtool in... After this flashtool should recognise you're device... If it doesn't then try flashing any ics kernel through cwm.. You'll find them in dev thread.. N then flash ics Rom
rakz992 said:
You mean to say flashtool doesn't recognise you're mobile?? In that case.. You are missing some flashtool drivers.. You'll find them in /flashtool/drivers/ whichever folder you've installed flashtool in... After this flashtool should recognise you're device... If it doesn't then try flashing any ics kernel through cwm.. You'll find them in dev thread.. N then flash ics Rom
Click to expand...
Click to collapse
Remember that I can access only the CWM screen, flashtool can recognize the mobile even in CWM mode?
However, I've already tried to flash the kernel via CWM, but it says installation aborted. I've zipped .10 and .54 kernel in two different zip and renamed them kernel.10.zip and kernel.54.zip.
What's wrong?
EDIT: ok, I've been able to use flashtool. I've flashed .10 kernel, then flashed .54 kernel, then reinstalled experience ROM, wiped and restarted. It continuos to bootloop. Now I try to flash a stock ICS ROM.
acvtre said:
Remember that I can access only the CWM screen, flashtool can recognize the mobile even in CWM mode?
However, I've already tried to flash the kernel via CWM, but it says installation aborted. I've zipped .10 and .54 kernel in two different zip and renamed them kernel.10.zip and kernel.54.zip.
What's wrong?
Click to expand...
Click to collapse
Omg in order to use flash tool, just shut down ur phone, and then press the power button and the volume down button. If the led becomes green then u can succesfully use flash tool... Man, do some research first!
And also, get the ftf file by extracting the zip....
Mokiwipeout said:
Omg in order to use flash tool, just shut down ur phone, and then press the power button and the volume down button. If the led becomes green then u can succesfully use flash tool... Man, do some research first!
And also, get the ftf file by extracting the zip....
Click to expand...
Click to collapse
I've mandaged to flash the kernels .10 and .54 via flashtool. Then reinstalled experience ROM and continuos to bootloop.
acvtre said:
I've mandaged to flash the kernels .10 and .54 via flashtool. Then reinstalled experience ROM and continuos to bootloop.
Click to expand...
Click to collapse
Man!! Just flash official ie stock .54 ftf file through flashtool!! Just this nothing else!! No kernel no nothing! Just ftf!!
dont install any rom!!! just flash the ftf file god dammit
rakz992 said:
Man!! Just flash official ie stock .54 ftf file through flashtool!! Just this nothing else!! No kernel no nothing! Just ftf!!
Click to expand...
Click to collapse
Ok, now I've wiped and flashed only MT27_6.1.1.B.1.54_KERNEL.ftf file through flashtool. Restarted the phone and it continuos to bootloop. When the phone says preparing internal storage it restart the phone.
sorry for my noobage. Now I've flashed MT27i_6.1.1.B.1.54_Global.ftf (big file) and flashtool had a problem. It says "err severity=major err code="0009"" err dynamic: block verification failed".
Now the phone continuosly shows screen with "sony".
Now what can I do? Can't even enter in CWM mode.
Ok, I've solved the problem. The last firmware I flashed was for unlocked xperia sola, this is why I had problems. Now I've resolved the softbrick thanks to a guide of doctor_droid.
Now I have to reroot and reinstall CWM, right?
Also thanks to you guys for your patience.
Yes... N after you install cwm.. Please make a back up through cwm for god sake!! happy rooting!! :thumbup:
Another question: the first time that the bootloop started was when I flashed cybershot and ac!d without restarting.
Do you think that the bootloop started because I haven't resarted between the two flashes?
Nothing as such.. May be conflicts between cybershot n acid files!! It's better you restart everytime you flash.. N do wipe cache partition n dalvik
Oh gosh, another funny problem. Got a problem with rooting.
I've flashed .10.tft kernel, then run "runme.bat" (from rootwithrestore) and this time says that there's "old adb" or something like that. However, I manage to conclude the process, but when I reboot I've got black screen. After that I've flashed the .54.tft file and the phone works fine, but there's no SuperSU app. So I suppose it's not rooted.
What's wrong with the runme.bat?
Yep not rooted!! Try again!!