Related
i saw a post about ringer delay for AT&T user and they just need to disable the dialer and the problem solve but what about us sprint users? Here is the original post about that http://forum.xda-developers.com/showthread.php?t=449417
i tried to disable the dialer on registry but still get 2-3 second delay before my Touch Pro actually ring.
Download and install DiamondTweaks. There is an option to disable the ringer delay. Works well.
convert your ringer to .wav file
temperamentalman said:
Download and install DiamondTweaks. There is an option to disable the ringer delay. Works well.
Click to expand...
Click to collapse
The ringer delay that this changes is the pause between when the ringtone ends and it repeats. Not the delay from when the LED starts flashing (because a call arrived) till the phone actually starts ringing.
If you wish to turn off the HTC dialer and use the WM Dialer, simply goto the following registry entry,
[HKEY_LOCAL_MACHINE/Security/Phone/Skin]
"Enabled" = dword:1​change the Enabled value from 1 to 0 which will disable the HTC dialer.
I vote for converting to WAV files as well.
If you would like to complain to Sprint about it, the following is the thread I started on Sprint's forum regarding this very subject.
http://forums.buzzaboutwireless.com/baw/board/message?board.id=SmartPhones&thread.id=5304
Thanks smotrs...
Know anyway to get the light sensor to turn off the screen when on a call (Sprint) other than S2U2?
temperamentalman said:
Thanks smotrs...
Know anyway to get the light sensor to turn off the screen when on a call (Sprint) other than S2U2?
Click to expand...
Click to collapse
Depends on what you may have done (adding programs, etc..) to your phone. By default, our devices will turn the screen off to conserve battery while a call is in session. However, if you have added one of the S2A dialer GSM versions which was taken from the Touch HD, that feature was disabled because of the InCall curtain. The CDMA versions (my signature and others) were taken from the Sprint Diamond ROM that was released and still contains the necessary code to turn off the screen display while the call is in progress.
Smotrs...just HR'd and installing now. I haven't tried that one, and actually think I ended up with the GSM version I WAS using.
I'll let you know how it works.
Thanks...
Well, it still sits there while the screen "times" out. I thought the light sensor was supposed to dim the screen almost immediately. I'm on the call for 30-40 seconds before it dims, and then cuts off.
Is this a Sprint thing?
temperamentalman said:
Well, it still sits there while the screen "times" out. I thought the light sensor was supposed to dim the screen almost immediately. I'm on the call for 30-40 seconds before it dims, and then cuts off.
Is this a Sprint thing?
Click to expand...
Click to collapse
It should Dim after about 10 seconds (or whatever you have in the backlight Advanced setting under Battery). After about 40 seconds or so (same location) it should turn off the screen.
At least that's what mine does, just verified it again. Sounds like maybe your values are too high. After a HR they usually are by default.
Somehow it was at 30 (dim) and 1 min (off). That is a little high. Changed it to 10 / 40. We'll see what that does.
Thanks for the tip. I'll keep you posted.
Seems to now be working the way you explained!!! Thank you for the help!
Is there anything else out there, other than S2U2 that allow FULL SCREEN Caller ID pictures??? I don't want to reinstall that because the dialer is actually working right. I just miss full screen caller ID.
Thanks again.
That I don't know, sorry.
Eh...it's ok. I'd much rather have a dialer that works than a full screen picture of my ignorant brother.
you can also change the Slot Cycle Index in the epst settings... you'll need your MSL though
it's under "Modem Settings"
What is slot cycle and where are these settings? How do I find my MSL? I don't see "Modem Settings".
not trying to be an ass, but i suggest you do some searching. there is plenty of info on the subject
check out this thread - http://forum.ppcgeeks.com/showthread.php?t=48775&highlight=epst+poll
or here - http://forum.ppcgeeks.com/showpost.php?p=625185&postcount=14
and here - http://forum.ppcgeeks.com/showthread.php?t=42730&highlight=epst+poll
I don't think you are an ass...I'm thinking thanks for the threads!
I know search is my friend LOL
lol, no prob man...
Changed the SCI to 1. We'll see if that helps. There is always "0"!
I'm also seeing mixed reports/opinions on ACCOLC - Access Overload Class. Mine was defaulted at 8 on Sprint. People say leave it alone. People say set it lower. Others say set it higher.
i found that setting SCI to 1 is good enough, i'm able to catch my calls and haven't noticed decreased battery life from it so that's where mine stays.
can someone please tell me how to disable auto brightness on
x10i eternity rom build 003
i tried using every brightness app/widget possible to turn it off but as soon as i turn it off and put the phone under different light setting i can see that the auto brightness is still on
i tried using adjbrightness but it keeps telling me that my phone isnt rooted; anyone get this app to work on x10??
please help n sorry if this questions been asked and answered before. this forum is getting too big and broad sometimes to find anything
thx in advance
Have you tried Sparepart? (That's the name)
Strange, i can't seem to turn on my autobrightness. It used to work perfectly in android 1.6. And i haven't noticed it untill recently. When auto brightness is checked, it just stays the same, even when i hold it directly under a lamp. Maby there is a bug in the software that prevents switching it on or off?
I'd also like an answer to this problem, because with auto brightness on the telephone is a battery eater.. you have to keep it to the minimum level to disable it, but when you are under a strong light, like outdoor with a sunny weather, it's difficult to see your screen's details. as you select a brightness level different from zero, the autobrightness turns on and eats the battery.
I hope I'm missing the solution to this, and somebody will help, because all the applications i've tried (spareparts included) didn't worked.
I'm quite confuse now.....
What actually do we need......
Turn it on...
or
Turn it off...
LOL
heh, so some people want a way to turn it off and others, like me, want to find a way to turn it on?
what a crazy phone..
I'm sure there used to be a tick box in the display settings to turn on/off the auto brightness. Anyway, i've tried various applications myself to get it on but nothing does it. I think the best solution is for us all to swap phones .
Spare Parts doesn't work for me, i tried enabling it, restarting the phone and jumping under my duvet.. but it didn't change
Did you update to 2.1? It was disabled in 2.1 as far as I know.
So the easiest solution, upgrade to 2.1! Else, I don't remember the menu but it's somewhere in the settings under 1.6.
I think we've all updated to 2.1 here =)
and yes, in 1.6 there was a box to tick to unable/disable autobrightness.
But, in 2.1, this feature has disappeared, leaving a seekbar and a damned widget which doesn't allow you to set or no autobrightness.
Hi,
The autobrightness is still there. It can be turned on/of from a stock SE connection widget. The different state for brightness is "minimum" -> "auto" -> "maximum"
MxCraft said:
It can be turned on/of from a stock SE connection widget. The different state for brightness is "minimum" -> "auto" -> "maximum"
Click to expand...
Click to collapse
Thats pretty much, exactly, what dpk0875 said, if i'm not mistaken.
As soon as i turn it off and put the phone under different light setting i can see that the auto brightness is still on
Click to expand...
Click to collapse
I can get, either 0%, or 100% brightness, with the ambient sensor disabled. Anything in-between, fades constantly.
No fix for this, i presume?
Reading websites while the screen fades in/out every couple of seconds drives me mad.
Ive never had any problem with it as long as you dont lean in front of it all the time lol.
Sent from my X10i using XDA App
This topic will be posted and discussed bugs CM7.2 by FAT. I did not give a GitHub bugtracker because the mode is more convenient forum to work with users.
Bugs:
1. massive battery drain.
2. camera goes darker when switching to video mode, and still dark when switching back to photo mode. need to close and reopen camera to make it normal again
Total bugs:
2
Torch is not functioning, the Toggle LED Flashlight option is greyed out in Cyanogenmod Settings/ Interface/ Notification power widget/ Widget buttons.
its 1 bug not 0.5
Sent from my GT-S5830 using xda premium
kevinlekiller said:
Torch is not functioning, the Toggle LED Flashlight option is greyed out in Cyanogenmod Settings/ Interface/ Notification power widget/ Widget buttons.
Click to expand...
Click to collapse
Torch is working Oh u mean to say toggel prefrence is not working rite Under cynagoen settings rite
nice initiative.
btw bugs from previous/other cm7 version that still plague later build including yours
1. massive battery drain.
2. camera goes darker when switching to video mode, and still dark when switching back to photo mode. need to close and reopen camera to make it normal again
Latest Google Maps not working (according to reports, haven't tested), this is an important app!!!
A Github available so you can share your code. Android is open-source, and it is important that you share your fixes with the community, not just compile "closed" ROMs!!!
iandol said:
Latest Google Maps not working (according to reports, haven't tested), this is an important app!!!
A Github available so you can share your code. Android is open-source, and it is important that you share your fixes with the community, not just compile "closed" ROMs!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1484542 this version works.
If the phone is locked and I receive a message, when I unlock the phone to read the message, the soft keys blink once. how can I fix this?
an0nym0us_ said:
nice initiative.
btw bugs from previous/other cm7 version that still plague later build including yours
1. massive battery drain.
2. camera goes darker when switching to video mode, and still dark when switching back to photo mode. need to close and reopen camera to make it normal again
Click to expand...
Click to collapse
Massive battery drain sorry dont mind but the battery is good as far as i concern and some people also report that its having good battery life on my own experience i even noticed it is good not best ya compared to other CM version it is good
And I have problem with camera darkness plus vol up/down buttons not work for zooming (I set them in Advanced Options). Tethering not works too.
an0nym0us_ said:
nice initiative.
btw bugs from previous/other cm7 version that still plague later build including yours
1. massive battery drain.
2. camera goes darker when switching to video mode, and still dark when switching back to photo mode. need to close and reopen camera to make it normal again
Click to expand...
Click to collapse
Same here..And I don't know why CM touch screen sensitivity always have different 'feel' compared to stock ROM, without notice I'm always touch the screen more tightly to prevent miss touch. I think you guys understand well
Ps. Since this ROM is nearest to official then I'll tell more CM bug:
The bass sound's ugly than stock. You can check with mort player with same equalizer (without DSP mgr of course). Also the equalizer freq change from 5 freq (stock) to 6 freq (CM) and if you slide bass booster on mort, the sound more awkward
Um..oh. Laggy gallery! LOL
Sent from my GT-S5830 using Tapatalk
alex0296 said:
If the phone is locked and I receive a message, when I unlock the phone to read the message, the soft keys blink once. how can I fix this?
Click to expand...
Click to collapse
Not only for messages but when someone is talking to you in WhatApp and others, with all notifications. I think this is to warn you that something happened when the phone was in standby. It's not a bug imo.
The same thing happens with others CM7 roms that I've tested and the AOSP too.
but until you use them do not light. remember that in another CM7 ROM, this does not happen if I went to Settings-> CyanogenMod-> Interface-> LED Notification, except that in this rom, there is no menu Led Notification
is a very good rom but i have a problem, i test smartass, v2, conservative and never enter in deep sleep always 245mhz (my min frequency).
ps: sorry my bad english.
alex0296 said:
If the phone is locked and I receive a message, when I unlock the phone to read the message, the soft keys blink once. how can I fix this?
Click to expand...
Click to collapse
That is common..
Market does not get updated to the latest version. In earlier CM versions, it used to get updated.
Market.
*edit Fixed the problem with market icon
Great ROM so far.
text messaging touch goes rumbled, maybe coz of sensitivity... hope to fix it on next release :clap: more power to Frozen Ace Team...
After two days of usage, I would like to report that this ROM has battery drain issues. Much more than the vo-1 version of CM 7.2
wifi?
Wifi does not work for me. It doesnt scan. When I turn it on in the notifications bar it just turns itself off again after a minute or so.
In the settings the same thing happens. (sometime here it even force-closes)
I found this in the ROM-Thread (http://forum.xda-developers.com/showthread.php?t=1263292):
"
Originally Posted by MrChaosDesire
Hmmm. Wifi does not scan. Maybe a reflash might work.
<3 CyanoAce 7.1
Wi-Fi works fine, but when you turn it ON you can`t see all points, as on stock FW. You must go to the Wireless setting and insert your password there."
When I tried several times to type in the password and SSID it still didnt connect and just turned wifi off again.
Unfortunaly, this link http://forum.cyanogenmod.com/topic/41455-cyanogenmod-7172-samsung-galaxy-ace/ does not work for some reason. (maybe just my computer...)
just checked, it worked: link is not helpfull
hello,
newbee here. I have acquire a sansung galaxy S2, and have a lot of fun with it.
trouble started when it rebooted at night. I figured out that some update or application crashes were the cause of it.
I think i rid of most of the issues, and got it pretty stable.
To avoid future complication, I even rid of the startup sound, but I can not rid off the vibration (especially the one when shutting down....)
I think it is part of the basic settings, and I did a lot of researches... no luck
Apps like Silent boot would not work either....
Do anyone know if it's even possible ?
If impossible, is ICS having the same issue, or can this be tuned ?
(i just can't believe no one thought of making that optional ...)
Please help me...
I'm on ICS and don't have that. It is part of system settings - sound. It usually is affected by the mode you have your phone set to (like if you have sound set to Sound and Vibrate or just Vibrate, etc). Try changing to just sound and see if that stops it from vibrating (or just silent mode with no vibrate).
Can also try to untick Vibrate on screen tap.
ICS is sweet... can't go back to GB... what you waiting for?!
Sorry, but this does not work (phone is rooted)
. tried vibration off no luck
. tried silent mode no luck
Is there someone who knows where is configured the vibration settings ?
I mean in which filesystem (full path if possible) ... ?
note: Official Samsung ICS for Unlocked Phones will come soon... unless there is a safe ROM and method to install it. For now I would concentrate on my Vibration issue.
Firstly, be patient. People will try to help you, doesn't mean the first answer fixes your problem.
As I stated... ICS does not have this problem. Phone makes no sound and no vibrate, if you set it that way on ICS.
How about give us more information. You said you're rooted but on GB. Are you using any different type of kernel other than stock? Like Siyah 2.xx?
As the filesystem where you can doodle with removing vibrations... I will leave someone with more experience to deal with that (even if I know the path)... in case I advise you something that can screw things up after.
*you might want to reset the phone - as the system notification/vibration settings should have done the trick.
hello
I upgraded to 4 versions of ICS.
Each one of them did not correct the issue : it still vibrate when shutting down the phone. (darkyrom, OCA, Pure and a "4.0.4" version having a clever 3 way option to launch (Nova, TW and Apex)).
I did not reset the settings yet but I will give it a go.
I will the thread updated.
That's a very strange bug then. The settings to control that though, is not with the launchers but with System Settings.
Maybe try this:
System Settings - Volume <inside there you have 4 settings. Try changing System to very low or all the way off. Then go to the whatever mode you have it set to (like Silent Mode or whatever)... and select Mute.
Then the lower categories of System... uncheck all of them: Keytones, Touch sounds, Screen lock sound, Vibrate on screen tap.
See if that works. If it does, then can narrow it down to one of those settings.
Thank you very much
The simplest things are not always obvious to the common....
It works, the vibration disappeared when /SOUNDS/VIBRATION SETTINGS/Vibrate on touch was set to the lowest. Meantime, the little vibration at startup disappeared as well. Now the phone can crash, update and reboot at night without waking me up ! .. a good logcat reader (just in case) running in background will help cleaning up when some error occurs....
Once again, thank you: that drove me mad.
Glad that worked. You're right, sometimes the simplest things are not always obvious, for everyone ;-)
LeFrog1310 said:
Thank you very much
The simplest things are not always obvious to the common....
It works, the vibration disappeared when /SOUNDS/VIBRATION SETTINGS/Vibrate on touch was set to the lowest. Meantime, the little vibration at startup disappeared as well. Now the phone can crash, update and reboot at night without waking me up ! .. a good logcat reader (just in case) running in background will help cleaning up when some error occurs....
Once again, thank you: that drove me mad.
Click to expand...
Click to collapse
I have chinese copy of Nexus One phone, android 2.2.1 and I don`t have VIBRATION SETTINGS tab in my menu, I can only turn vibrate on and off,
and I don`t have SOUNDS on SETINGS, I enter in AUDIO PROFILES to menage vibration,
how to turn off vibration on power on and off?
Hello, my name is Dan, i am new in this forum and i hope i will not broke any rule.
i am a new owner of galaxy s3 I9300, and i noticed a strange bug with my phone\android system.
my power saving mode have 4 options: "cpu limit", "fps limit for the screen", "color limit for mail and internet", "disable vibration".
i wont to use only 2 of them the "cpu limit" and "color limit for mail and internet", because the fps limit is pretty noticeable and i love to see my screen moving smooth.
soo let's get to the problem: when i turn on the power saving mode, everything is ok, the cpu limit working, i can see it in cpu+temp v2, and the screen option working too, and ever tying move smooth because i disabled the fps limit in power saving mode.
but when i press the the close button on the right side of the phone and re enter to the home screen, the screen move like the fps limit option is on (but it's not) i need to turn off and turn on again the battery save mode to disable again the fps limit option.
important to say that if you go to battery save mode options the fps limit is always turned off.
it's really annoying me, because every time you come back to home screen from black screen(turning off the screen with the button on the right side) you need to turn off and turn on the power save mode.
if some one can help me it will be grate.
information about my phone:
stock international version
no root
*#1234# - ap:i9300xxblh3
cp:i9300xxlh1
csc:i9300xefblh2
didn't install any power saving programs, or something that will effect the system, only games and casual apps
bump
bump, day past since i posted the thread.
Take it to a service centre .
jje
JJEgan said:
Take it to a service centre .
jje
Click to expand...
Click to collapse
but it looks like bug in android, you think something broken in my phone?
Can't replicate the issue on mine.. maybe the firmware you are using has it, have you tried flashing another one?
Skander1998 said:
Can't replicate the issue on mine.. maybe the firmware you are using has it, have you tried flashing another one?
Click to expand...
Click to collapse
i didn't try.
Did you turn on power save mode(with fps reduce turned off, it's the second option), then pressed the power button, and the home screen was not slow? the fps looks normal when i swipe between icons?
if you try too see the animation difference between the two state, then turn off the fps limit in power saving mode, and make the test again, and say if you had the problem.
you suggest me to flash new rom or go to the shop i bought the phone and make them fix it ?
p.s. if i record a video of the problem it will help understand me batter?