i was flashing to this rom http://forum.xda-developers.com/showthread.php?t=1891384
got stuck at booting with logo and yellow traingle
tried to resotore my backup rom got stuck also on the same logo
so i was trying to flash stock rom with odin 3.4
PHP:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
and then got stuck at the download mode and go anywhere tried to remove the battery but it opens
on a screen with a ( mobile ... yellow triangle .. PC )
Odin can still see the mobile , i can provide any other requested info
Post your phone details. Model, android version and baseband.
Sent from my GT-I9100 using xda app-developers app
Wagih El-Bedeawy said:
i was flashing to this rom http://forum.xda-developers.com/showthread.php?t=1891384
got stuck at booting with logo and yellow traingle
tried to resotore my backup rom got stuck also on the same logo
so i was trying to flash stock rom with odin 3.4
PHP:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
and then got stuck at the download mode and go anywhere tried to remove the battery but it opens
on a screen with a ( mobile ... yellow triangle .. PC )
Odin can still see the mobile , i can provide any other requested info
Click to expand...
Click to collapse
just go to www.sammobile.com and dwnld the stock firmware meant for I9100G and then flash the same using ODIN and see
ps- first try to flash a stock kernel meant for I9100g and see
HAXTREME said:
Post your phone details. Model, android version and baseband.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
GT-I9100G
2.3.6 stock rom
baseband dont know
and this is the version i m trying to flash "GT-I9100_XSG_I9100JPKH1_I9100XXKG5_I9100OJPKH1.tar"
Wagih El-Bedeawy said:
GT-I9100G
2.3.6 stock rom
baseband dont know
and this is the version i m trying to flash "GT-I9100_XSG_I9100JPKH1_I9100XXKG5_I9100OJPKH1.tar"
Click to expand...
Click to collapse
AFAIK that stock firmware is meant for I9100 not the I9100G
ps- if u install any rom/kernel meant for I9100 and its variants like M/P/T on ur I9100G u will hardbrick ur phone for sure, since I9100G is very diff from the above ones in Hardware
You're lucky youre only in a boot loop coz that sounds like an i9100 ROM not i9100G. As long as Odin is detecting your phone you should be able to flash a stock ROM for the G variant.
Sent from my GT-I9100 using xda app-developers app
thanks all now i got out of the download mode and i got stuck on the boot loop
but i can manage things from here thanks :good:
wel... hi xda...
i have my GT-I9100 for a couple of weeks now...
i rooted my gio, put cyanogenmod on it without any trouble what so ever.
with my gt-I9100, its a totally diffirent story. here is what i did.
i connected my usb to my phone. (original usb cable).
i followed the EXACT guide for "how to install ClockworkMod Recovery" from the wiki of syagonenmod. and after step seven, my phone didn't boot in any possible way.
so i tried the download mode. works like a charm...
next i try to flash the stock ROM..
odin gets stuck evrey frickin' time i try.... i tried stock ROM's, modded ROM's, every thing on odin... using the pda button to flash, phone button..
same awnser each time...
Code:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please xda... relay some of your mighty powers on my phone...
mrpopo666 said:
wel... hi xda...
i have my GT-I9100 for a couple of weeks now...
i rooted my gio, put cyanogenmod on it without any trouble what so ever.
with my gt-I9100, its a totally diffirent story. here is what i did.
i connected my usb to my phone. (original usb cable).
i followed the EXACT guide for "how to install ClockworkMod Recovery" from the wiki of syagonenmod. and after step seven, my phone didn't boot in any possible way.
so i tried the download mode. works like a charm...
next i try to flash the stock ROM..
odin gets stuck evrey frickin' time i try.... i tried stock ROM's, modded ROM's, every thing on odin... using the pda button to flash, phone button..
same awnser each time...
Code:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please xda... relay some of your mighty powers on my phone...
Click to expand...
Click to collapse
"edit": i can also get it to boot normally now, it then shows a yellow triangle with exclamation mark (soo sorry for bad spelling, i'm trying my very best)
The yellow triangle isn't a problem. Doesn't mean theres any problem with the phone. Only there as a visual indicator that the phone has been flashed. If it bothers you, search for chainfire's "triangle away" app.
Edit:
If you're unable to install cyanogenmod you can try this..
-first ensure you're on ICS and not on GB.
-download the tar version of siyah kernel for the S2.
install it via Odin..steps similar to what you used to install cf.
once you've flashed siyah, you should have root access and cwm recovery. Now you can install CM or any other custom rom.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
The yellow triangle isn't a problem. Doesn't mean theres any problem with the phone. Only there as a visual indicator that the phone has been flashed. If it bothers you, search for chainfire's "triangle away" app.
Edit:
If you're unable to install cyanogenmod you can try this..
-first ensure you're on ICS and not on GB.
-download the tar version of siyah kernel for the S2.
install it via Odin..steps similar to what you used to install cf.
once you've flashed siyah, you should have root access and cwm recovery. Now you can install CM or any other custom rom.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
great!!!!! that kernel works like a charm....
only problem is, i can't get into the cwm recovery....
ps the yellow triangle wasn't the one under "samsung", it had something to do with an faulty upgrade and that you should reconnect to keis.... anyway, thats fixed now... thx a lot
mrpopo666 said:
great!!!!! that kernel works like a charm....
only problem is, i can't get into the cwm recovery....
Click to expand...
Click to collapse
Can't you get into recovery using the vol up+ home+ power button combo?
It takes some getting used to..most custom ROMs provide the option to go directly into rcovery from the power menu itself.
Don't you have the CWM app? Can gt into recovery mode through that too.
Sent from my GT-I9100 using xda app-developers app
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
so you tried to flash a pit file?
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
sleepingsword said:
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
Click to expand...
Click to collapse
I just manged to help others over this soft brick problem, by flashing one of Darkys roms !!
Just find your country/region dl it and flash following his instructions
http://www.darkyrom.com/index.php?forum/#rom-darkyrom-iii-i9300.122
---------- Post added at 09:11 AM ---------- Previous post was at 09:07 AM ----------
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Sammy rom wont solve the problem - Darkyrom will :laugh:
Glebun said:
so you tried to flash a pit file?
Click to expand...
Click to collapse
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
sleepingsword said:
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
Click to expand...
Click to collapse
Are you blind ??
Stock wont do, Darky will!
Get CWM again do this>
*Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Now you successfully installed CWM + Super User + CWM Manager.
spoonymoon said:
Are you blind ??
Stock wont do, Darky will!
Click to expand...
Click to collapse
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
sleepingsword said:
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
Click to expand...
Click to collapse
Look one post above
spoonymoon said:
Look one post above
Click to expand...
Click to collapse
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
sleepingsword said:
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
Click to expand...
Click to collapse
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whitout reparation) thats all
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
spoonymoon said:
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whiteout reparation) thats all
Link>http://speedy.sh/kcqvD/
Click to expand...
Click to collapse
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
sleepingsword said:
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
spoonymoon said:
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
Click to expand...
Click to collapse
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
EDIT:
tried this PIT file: GT-I9300_mx_20120329
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sleepingsword said:
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
Click to expand...
Click to collapse
Try Odin v.3.07
dont work
Not sure but think , its possible a corrupted emmc !
But flashing a wrong pit file could make things even worse - lets investigate a bit more ?
Try latest odin 3.07
Btw: its a long shot but try flashing whitout external sd - remove it first
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Damm sorry to hear br0
And you're welcome
TRY THIS COULD WORK
http://www.androidauthority.com/galaxy-s3-gt-i9300-clockworkmod-recovery-6-0-1-0-install-103347/
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
painterceessie said:
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
Click to expand...
Click to collapse
with what excuse did they tell you no warrenty?
even if you flashed it they cant say no warrenty, a ok phone dosent burn emmc because of a flash, actually in eu theres a eu statement proven at court that says they cant say so, ill find the page for you, print that and throw that in their faces!
Searching is not really painful....have you tried it?
Follow the screenshots and use the Odin version included.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Just got my new samsung galaxy s3 yesterday and I have kies installed, usb drivers installed.. trying to install/flash CWM with odin.. think im doing everything right and by the book, following the instructions.. but thats the error it gives me.. anyone here that can help me troubleshoot?
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
great
jaidev.s said:
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
Click to expand...
Click to collapse
great thanks had the same issue
Kies already wasnt running.. any other ideas?
bump. anyone? Please.
just gonna keep bumping
Herp?
Kies shouldn't run even in back ground. Are you sure your phone is in download mode and not in recovery mode?
Sent from my GT-I9300 with a BIG
I have stock 4.1.2 rooted. I tried installing cwm 6.0.2.9 using odin and instead of pass it said reset on top. Now it shows yellow triangle but doesn't turn on after that. Please help.
Sent from my Nexus 4
Dozeris said:
Hi,
I have a problem while trying to root my device in order to install new custom roms.
My device is: s2 i9100 4.1.2.
Problem: <ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
*I had rooted my device a year ago in order to unlock it, then i have unrooted it, and instaled stock firmware.
*I tired to reinstal drivers many times, i tired to shut down kies while trying to root.
*I tried to install other official firmware and i have the same problem. What ever I am doing with Odin every time the same issue.
Does someone have any desicion?
Click to expand...
Click to collapse
Read that thread by Hopper about odin troubles.