<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Just got my new samsung galaxy s3 yesterday and I have kies installed, usb drivers installed.. trying to install/flash CWM with odin.. think im doing everything right and by the book, following the instructions.. but thats the error it gives me.. anyone here that can help me troubleshoot?
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
great
jaidev.s said:
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
Click to expand...
Click to collapse
great thanks had the same issue
Kies already wasnt running.. any other ideas?
bump. anyone? Please.
just gonna keep bumping
Herp?
Kies shouldn't run even in back ground. Are you sure your phone is in download mode and not in recovery mode?
Sent from my GT-I9300 with a BIG
Related
So, I was attempting to root my Sprint Galaxy s3, using the CF-root 6.3 via Odin v1.85. All was going well, then just before the big finale, Odin crashes. Now my firmware is messed up on my new phone. I can get back into Downloading... mode, but if I try to re-flash with cf-root, I get this in Odin:
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And this on the phone:
Unsupport dev_type.
And when I reboot:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Is my phone bricked? How can I undo this?
Thanks.
If this is in the wrong section, I apologize.
Did you try root your US sprint s3 with a method for the international s3?
If so then search because someone made that same mistake last night.
In future don't flash anything for the inter national version on your American version.
Sent from my GT-I9300 using xda premium
I seem to have fixed it. Used Odin to install the clockwork mod, and the phone boots up normally now. Close call.
Hello everyone.. I am trying to go back to TWRP 2.5.0.2 however odin keeps failing on me when it goes to Auth. any ideas as to why I am getting tired of the freezing in 2.6. I tried a zip that was supose to be able to flash recovery and now i get unauthorized software yellow triangle..phone still boots though. Oh and I cannot get ADB to work either says no devices..i do have the Samsung USB drivers installed
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Travisdroidx2 said:
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Click to expand...
Click to collapse
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Sidewind75 said:
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Click to expand...
Click to collapse
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Travisdroidx2 said:
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Click to expand...
Click to collapse
As stated above I cannot get odin to work it keeps failing
Sidewind75 said:
As stated above I cannot get odin to work it keeps failing
Click to expand...
Click to collapse
Stupid question you are flashing it in PDA and not phone tab correct?
Travisdroidx2 said:
Stupid question you are flashing it in PDA and not phone tab correct?
Click to expand...
Click to collapse
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Sidewind75 said:
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Travisdroidx2 said:
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Click to expand...
Click to collapse
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Sidewind75 said:
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Click to expand...
Click to collapse
Glad you got it up and running!
hey,
so my friend brought me his S3, never rooted or tampered with. He just said the phone went into boot and never recovered. I can go in download mode but not recovery (my initial plan was to wipe cache).
he would kind of want his data intact but I don't know how viable that is by now..
Any advice?
Thank you
Posklapenzi said:
hey,
so my friend brought me his S3, never rooted or tampered with. He just said the phone went into boot and never recovered. I can go in download mode but not recovery (my initial plan was to wipe cache).
he would kind of want his data intact but I don't know how viable that is by now..
Any advice?
Thank you
Click to expand...
Click to collapse
Try flashing a custom recovery like twrp or philz touch. But it actually sounds like a soft brick. worst case scenario you would have to flash a new firmware/
this is the last one http://forum.xda-developers.com/showthread.php?t=1835931
Posklapenzi said:
hey,
so my friend brought me his S3, never rooted or tampered with. He just said the phone went into boot and never recovered. I can go in download mode but not recovery (my initial plan was to wipe cache).
he would kind of want his data intact but I don't know how viable that is by now..
Any advice?
Thank you
Click to expand...
Click to collapse
The phone's own recovery mode is not much flexible as other third-part recoveries. So I guess you have to install CWM recovery and wipe dalvik cache from there before booting. Try installing CWM recovery via Odin and then wipe dalvik cache. And don't worry, installing custom recovery won't root your phone.
If the stock recovery can, wipe the cache and dalvik cache
Sent from my GT-I9300 using Tapatalk
It appears I can't flash any recovery:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Report from Odin. Could I flash a stock firmware tho?
Can't mount stock rom either. I tried ticking repartition too, this is what comes out:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMG4_I9300DBTEMG3_I9300XXEMG4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
Bump.. Please help someone.
Make sure you have the latest odin and the correct drivers and also make sure kies is not open
Sent from my SAMSUNG GT-N7105 using XDA Premium 4 mobile app
Posklapenzi said:
It appears I can't flash any recovery:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Report from Odin. Could I flash a stock firmware tho?
Click to expand...
Click to collapse
Try to flash PIT partition via odin( be careful you must have the PIT file sweatable for your model )
abidifethi said:
Try to flash PIT partition via odin( be careful you must have the PIT file sweatable for your model )
Click to expand...
Click to collapse
How can I know what that is? I can't boot the phone to see the exact model? Says I9300GSMH on the back behind the battery so I should assume that's accurate?
Posklapenzi said:
How can I know what that is? I can't boot the phone to see the exact model? Says I9300GSMH on the back behind the battery so I should assume that's accurate?
Click to expand...
Click to collapse
http://widefide.com/mobile/galaxy-s3-boot-problem-solution
Hi Devs,
I am stuck in a issue. I installed cm 12.0 (unofficial rom) to my Galaxy s3 GT-i9300 everything was working fine but suddenly it keeps on crashing randomly one day while calling my phone froze. I restarted the phone it stucked on SAMSUNG BOOT SCREEN.
I can go into download mode and recovery mode, currently using PhilzTouch 6 on recovery.
Things I have tried already.
Wiped Cache Partition
Wiped Data/Factory Reset
when i try to wipe cache or factory reset i get errors
E: can't mount /data or Formatting /sdcard/.android_secure
For some reason my phones internal memory is on the read only mode i tried to flash the stock rom as well so far no luck.
I tried 4 different stock roms none of them work they all stopped on nand write or setup connection
I followed the instruction below because thats what exactly happened to my phone but no luck when ever i try to load boot files into PDA it keeps failing.
http://forum.xda-developers.com/showthread.php?t=1840030
please guys i am tired and exhausted trying all different stuff guide me. I even tried PIT Files noting work. Thanks in advance
Try going back to stock/factory.
Boot in download mode (vol down+home+power).
Use Odin to flash stock recovery and firmware.
Once you are able to boot perfectly into touchwiz, can narrow down your points of failure and try again or try another ROM
blu88 said:
Try going back to stock/factory.
Boot in download mode (vol down+home+power).
Use Odin to flash stock recovery and firmware.
Once you are able to boot perfectly into touchwiz, can narrow down your points of failure and try again or try another ROM
Click to expand...
Click to collapse
Hi Blue,
Thanks for reply , so you meant to say i replace philztouch with stock recovery.
Correct me if i am wrong.
Replace philz with stock recovery and replace your rom with touchwiz. Figure out where you went wrong and then flash your custom rom again or flash a different custom rom.
Try flashing another recovery. Worked for me once
Thanks for Help
Can you send me link for GT-i9300 International Stock Recovery so i am installing exact thing it would be great help from you guys and i would really appreciate it.
blu88 said:
Replace philz with stock recovery and replace your rom with touchwiz. Figure out where you went wrong and then flash your custom rom again or flash a different custom rom.
Click to expand...
Click to collapse
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
saqygee said:
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
Click to expand...
Click to collapse
saqyee, you placed the stock recovery file in the PDA section right? DO NOT TOUCH THE PIT SECTION.
saqygee said:
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
Click to expand...
Click to collapse
Nand write fail usually means emmc corrupt/damaged you could try the rescue firmware but this looks like hardware failure.
Sent from my LG-D855 using Tapatalk
Very simple and hard for me at the same time
Flashed twrp on my galaxy s6edge 925f and that was the only thing i did so far, after 1st reboot it started up, but on second time i tryed to restart phone and wiped system (think ) becouse it ways i dont have os installed, it stuck at samsung logo, smartswtich neither kies recognizes my phone (yes drivers are installed) have downloaded stock firmware and tryed to flash it via odin, but..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed
ok with odin 3.12 i have this error
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can please anyone help me out?
managed somehow make it to work, cloes please
if you have samsung kies also installed on your comp it wont work....
I have this problem , can you explain how you fixed it?
aryaazimi72 said:
I have this problem , can you explain how you fixed it?
Click to expand...
Click to collapse
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
callumbr1 said:
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
Click to expand...
Click to collapse
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
aryaazimi72 said:
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
Click to expand...
Click to collapse
Which rom are you on? And which BL are you flashing?
callumbr1 said:
Which rom are you on? And which BL are you flashing?
Click to expand...
Click to collapse
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
aryaazimi72 said:
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
Click to expand...
Click to collapse
Crisscross development has stopped. I recommend CarHD rom it is the best by far.
Make sure your flashing the roms through twrp