Hello everyone.. I am trying to go back to TWRP 2.5.0.2 however odin keeps failing on me when it goes to Auth. any ideas as to why I am getting tired of the freezing in 2.6. I tried a zip that was supose to be able to flash recovery and now i get unauthorized software yellow triangle..phone still boots though. Oh and I cannot get ADB to work either says no devices..i do have the Samsung USB drivers installed
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Travisdroidx2 said:
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Click to expand...
Click to collapse
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Sidewind75 said:
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Click to expand...
Click to collapse
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Travisdroidx2 said:
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Click to expand...
Click to collapse
As stated above I cannot get odin to work it keeps failing
Sidewind75 said:
As stated above I cannot get odin to work it keeps failing
Click to expand...
Click to collapse
Stupid question you are flashing it in PDA and not phone tab correct?
Travisdroidx2 said:
Stupid question you are flashing it in PDA and not phone tab correct?
Click to expand...
Click to collapse
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Sidewind75 said:
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Travisdroidx2 said:
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Click to expand...
Click to collapse
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Sidewind75 said:
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Click to expand...
Click to collapse
Glad you got it up and running!
Related
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
so you tried to flash a pit file?
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
sleepingsword said:
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
Click to expand...
Click to collapse
I just manged to help others over this soft brick problem, by flashing one of Darkys roms !!
Just find your country/region dl it and flash following his instructions
http://www.darkyrom.com/index.php?forum/#rom-darkyrom-iii-i9300.122
---------- Post added at 09:11 AM ---------- Previous post was at 09:07 AM ----------
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Sammy rom wont solve the problem - Darkyrom will :laugh:
Glebun said:
so you tried to flash a pit file?
Click to expand...
Click to collapse
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
sleepingsword said:
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
Click to expand...
Click to collapse
Are you blind ??
Stock wont do, Darky will!
Get CWM again do this>
*Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Now you successfully installed CWM + Super User + CWM Manager.
spoonymoon said:
Are you blind ??
Stock wont do, Darky will!
Click to expand...
Click to collapse
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
sleepingsword said:
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
Click to expand...
Click to collapse
Look one post above
spoonymoon said:
Look one post above
Click to expand...
Click to collapse
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
sleepingsword said:
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
Click to expand...
Click to collapse
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whitout reparation) thats all
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
spoonymoon said:
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whiteout reparation) thats all
Link>http://speedy.sh/kcqvD/
Click to expand...
Click to collapse
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
sleepingsword said:
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
spoonymoon said:
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
Click to expand...
Click to collapse
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
EDIT:
tried this PIT file: GT-I9300_mx_20120329
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sleepingsword said:
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
Click to expand...
Click to collapse
Try Odin v.3.07
dont work
Not sure but think , its possible a corrupted emmc !
But flashing a wrong pit file could make things even worse - lets investigate a bit more ?
Try latest odin 3.07
Btw: its a long shot but try flashing whitout external sd - remove it first
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Damm sorry to hear br0
And you're welcome
TRY THIS COULD WORK
http://www.androidauthority.com/galaxy-s3-gt-i9300-clockworkmod-recovery-6-0-1-0-install-103347/
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
painterceessie said:
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
Click to expand...
Click to collapse
with what excuse did they tell you no warrenty?
even if you flashed it they cant say no warrenty, a ok phone dosent burn emmc because of a flash, actually in eu theres a eu statement proven at court that says they cant say so, ill find the page for you, print that and throw that in their faces!
Searching is not really painful....have you tried it?
Follow the screenshots and use the Odin version included.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Just got my new samsung galaxy s3 yesterday and I have kies installed, usb drivers installed.. trying to install/flash CWM with odin.. think im doing everything right and by the book, following the instructions.. but thats the error it gives me.. anyone here that can help me troubleshoot?
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
great
jaidev.s said:
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
Click to expand...
Click to collapse
great thanks had the same issue
Kies already wasnt running.. any other ideas?
bump. anyone? Please.
just gonna keep bumping
Herp?
Kies shouldn't run even in back ground. Are you sure your phone is in download mode and not in recovery mode?
Sent from my GT-I9300 with a BIG
Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
nandopires1989 said:
Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
Click to expand...
Click to collapse
you may have to use the no wipe stock rom and start from scratch
Man, I cant even imagine how do I do that. Can u give me a north?
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
theidoctor said:
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
Click to expand...
Click to collapse
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
nandopires1989 said:
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
Click to expand...
Click to collapse
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Perfect! I will try it now!
Thank you very much!
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
nandopires1989 said:
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
Click to expand...
Click to collapse
Hello There! I think I made it...I already made the Root, and Im here right now (http://forum.xda-developers.com/showthread.php?t=2292112) , but Im experiencing some dificulties with this...I'm not developer...coul'd u help me with more this?
Thanks!
I tried to do a cyanogenmod update, but something went wrong and now I can't boot into android. I've tried going back into the recovery mode to reflash the rom, but it freezes there. I've also tried flashing clockworkmod recovery through ODIN and download mode, but the download back never moves at all, so I'm not sure if I can't use download mode or if it's just that ODIN isn't doing anything. I'm not sure what to do anymore, does anyone have any idea how to get me out of this?
Clothbox said:
I tried to do a cyanogenmod update, but something went wrong and now I can't boot into android. I've tried going back into the recovery mode to reflash the rom, but it freezes there. I've also tried flashing clockworkmod recovery through ODIN and download mode, but the download back never moves at all, so I'm not sure if I can't use download mode or if it's just that ODIN isn't doing anything. I'm not sure what to do anymore, does anyone have any idea how to get me out of this?
Click to expand...
Click to collapse
you could try heimdall.
it seems like you got a corrupted download or the boot.img is jacked up.
it wont help to flash the same rom.
grab stock files (need pit file) and flash with heimdall or odin.(preferably not using windows 8/8.1)
http://forum.xda-developers.com/showthread.php?t=2363213 does this link help?
Lgrootnoob said:
you could try heimdall.
it seems like you got a corrupted download or the boot.img is jacked up.
it wont help to flash the same rom.
grab stock files (need pit file) and flash with heimdall or odin.(preferably not using windows 8/8.1)
http://forum.xda-developers.com/showthread.php?t=2363213 does this link help?
Click to expand...
Click to collapse
Yeah, I'll try this approach. Where do I get the pit file?
Clothbox said:
Yeah, I'll try this approach. Where do I get the pit file?
Click to expand...
Click to collapse
should just be a part of the odin packages they provide.
dont worry about it.
just follow the instructions.
Lgrootnoob said:
should just be a part of the odin packages they provide.
dont worry about it.
just follow the instructions.
Click to expand...
Click to collapse
I tried it, and the phone is stuck in download mode with the progress bar never moving past a little dot. Is it hopeless?
Clothbox said:
I tried it, and the phone is stuck in download mode with the progress bar never moving past a little dot. Is it hopeless?
Click to expand...
Click to collapse
screenshot odin,
try different usb port, and different cable, and use the latest odin for sure, use kies to install drivers and different pc
Lgrootnoob said:
screenshot odin,
try different usb port, and different cable, and use the latest odin for sure, use kies to install drivers and different pc
Click to expand...
Click to collapse
Wow, thanks! I got it to work. I don't think I can boot into android but I can definitely boot into recovery. But it's just the standard recovery, I'm not sure if I can flash a rom through it. Where do I go from here?
Clothbox said:
Wow, thanks! I got it to work. I don't think I can boot into android but I can definitely boot into recovery. But it's just the standard recovery, I'm not sure if I can flash a rom through it. Where do I go from here?
Click to expand...
Click to collapse
what happened in odin? I can't really tell if something happened when it flashed system.img
.....
---------- Post added at 02:29 AM ---------- Previous post was at 02:27 AM ----------
just copy and paste the output of the message box here from odin.
Lgrootnoob said:
what happened in odin? I can't really tell if something happened when it flashed system.img
.....
Click to expand...
Click to collapse
Not sure if this will help, but here:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Clothbox said:
Not sure if this will help, but here:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
wtf....
how can you not boot into android?
did you do the repartition check thing?
Lgrootnoob said:
wtf....
how can you not boot into android?
did you do the repartition check thing?
Click to expand...
Click to collapse
No, the only thing I checked was "Auto Reboot" and "F. Reset Time". Should I do it one more time or should I find a way to flash cyanogenmod again?
Clothbox said:
No, the only thing I checked was "Auto Reboot" and "F. Reset Time". Should I do it one more time or should I find a way to flash cyanogenmod again?
Click to expand...
Click to collapse
dont check auto reboot, manually reboot with power + volume up this time.
Lgrootnoob said:
dont check auto reboot, manually reboot with power + volume up this time.
Click to expand...
Click to collapse
Yeah, it still won't let me boot. Is there a way I can flash a rom or put in a different recovery mode from here?
Clothbox said:
Yeah, it still won't let me boot. Is there a way I can flash a rom or put in a different recovery mode from here?
Click to expand...
Click to collapse
yea, just install a different odin recovery img.
you can also take any recovery.img you want and format it as odin file with md5 igning etc
Lgrootnoob said:
yea, just install a different odin recovery img.
you can also take any recovery.img you want and format it as odin file with md5 igning etc
Click to expand...
Click to collapse
Is there a way I can flash cyanogenmod through ODIN? I'm still lost at this point, sorry...
Clothbox said:
Is there a way I can flash cyanogenmod through ODIN? I'm still lost at this point, sorry...
Click to expand...
Click to collapse
yes, take a cynagoen mod flashable zip, put it into an ext4 system.img if it isnt already one, then make an odin tar.md5 out of it.(if your already lost then your screwed)
It's not uncommon to need to reboot to recovery to factory reset after flashing the firmware through Odin or Heimdall as many of the packages do not wipe data as they are meant to be update versions.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Clothbox said:
Is there a way I can flash cyanogenmod through ODIN? I'm still lost at this point, sorry...
Click to expand...
Click to collapse
^ he made a good point
Very simple and hard for me at the same time
Flashed twrp on my galaxy s6edge 925f and that was the only thing i did so far, after 1st reboot it started up, but on second time i tryed to restart phone and wiped system (think ) becouse it ways i dont have os installed, it stuck at samsung logo, smartswtich neither kies recognizes my phone (yes drivers are installed) have downloaded stock firmware and tryed to flash it via odin, but..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed
ok with odin 3.12 i have this error
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can please anyone help me out?
managed somehow make it to work, cloes please
if you have samsung kies also installed on your comp it wont work....
I have this problem , can you explain how you fixed it?
aryaazimi72 said:
I have this problem , can you explain how you fixed it?
Click to expand...
Click to collapse
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
callumbr1 said:
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
Click to expand...
Click to collapse
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
aryaazimi72 said:
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
Click to expand...
Click to collapse
Which rom are you on? And which BL are you flashing?
callumbr1 said:
Which rom are you on? And which BL are you flashing?
Click to expand...
Click to collapse
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
aryaazimi72 said:
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
Click to expand...
Click to collapse
Crisscross development has stopped. I recommend CarHD rom it is the best by far.
Make sure your flashing the roms through twrp