Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
nandopires1989 said:
Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
Click to expand...
Click to collapse
you may have to use the no wipe stock rom and start from scratch
Man, I cant even imagine how do I do that. Can u give me a north?
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
theidoctor said:
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
Click to expand...
Click to collapse
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
nandopires1989 said:
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
Click to expand...
Click to collapse
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Perfect! I will try it now!
Thank you very much!
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
nandopires1989 said:
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
Click to expand...
Click to collapse
Hello There! I think I made it...I already made the Root, and Im here right now (http://forum.xda-developers.com/showthread.php?t=2292112) , but Im experiencing some dificulties with this...I'm not developer...coul'd u help me with more this?
Thanks!
Related
I installed Cyanogen mod, didn't like it so wanted to go back to the stock, as it was "out-of-the-box"
Loaded up odin (latest) put phone into download mode, loaded I9100XWKF3_Kernel kernel, all went well.
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Now phone is stuck at the start screen
"Samsung Galaxy S II GT-I9100"
Where do I go from here? Thanks for your time.
Try flashing stock again.
And how would I go about doing that?
I've just redone Odin with XW_NEE_KI4, am I supposed to then boot into the clockwork mod recovery option to install a ROM?
If so, I've downloaded the VillainROM-3.0.0-signed rom, copied it to my SD card, but it isn't showing up.
And I've tried with a different rom only to be told that the file integerity or something along those lines has failed, leaving back at the boot/lock screen.
Can someone tell me how I can get my SD card to show up? Or of a way I can connect my phone to my PC so I can copy the VillainROM-3.0.0-signed onto the phones memory so I can install it via that way?
Thanks, it's rather urgent I get the phone sorted.
arghsarge said:
I installed Cyanogen mod, didn't like it so wanted to go back to the stock, as it was "out-of-the-box"
<snip>
Where do I go from here? Thanks for your time.
Click to expand...
Click to collapse
Just restore your nandroid backup that you made when following the instructions to install CyanogenMod.
Found a little work-around, but if you go into the settings and mount the USB, but don't click mount, your phone will show up as a memory card allowing you to copy any required files.
However, when I copied over the VillainROM-3.0.0-signed to install it and run it I now get the following error.
"E:signature verification failed. Installation aborted."
Any solutions please?
oinkylicious said:
Just restore your nandroid backup that you made when following the instructions to install CyanogenMod.
Click to expand...
Click to collapse
When I try that (and I'm not too sure I created a backup) it says "couldn't open directory, no files found"
Currently downloading GT-I9100_NEE_I9100XWKI4_I9100XXKI2_I9100XXKI1_I9100XWKI4.zip to see if this'll work.
Going through the options, I went to "Fix permissions" I then tried installing the GT-I9100_NEE_I9100XWKI4_I9100XXKI2_I9100XXKI1_I9100XWKI4.zip I downloaded, however it gave me errors.
So I tried the vanilla rom, and it's now installing *something* and it's now said "install from SD card complete."
So, after a few minutes at the dreaded boot/lock screen, I've now got a boot screen for "villiainrom" and it's gone no further.
Good news everyone!
It's now booted and all is well thus far.
gratz! u manage to tame the monster!
arghsarge said:
I installed Cyanogen mod, didn't like it so wanted to go back to the stock, as it was "out-of-the-box"
Loaded up odin (latest) put phone into download mode, loaded I9100XWKF3_Kernel kernel, all went well.
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Now phone is stuck at the start screen
"Samsung Galaxy S II GT-I9100"
Where do I go from here? Thanks for your time.
Click to expand...
Click to collapse
Looks like the Problem was, that you were only flashing the stock kernel onto your CM7
so in the end, you had a CM7 rom with a samsung kernel (wich obviously doesen't work)
kaukassus said:
Looks like the Problem was, that you were only flashing the stock kernel onto your CM7
so in the end, you had a CM7 rom with a samsung kernel (wich obviously doesen't work)
Click to expand...
Click to collapse
Exactly!
You must flash FULL firmware (with PDA
Code:
, Phone [modem] and CSC), not only kernel... Next time RTFM first. ;) Cheers!
Hello everyone.. I am trying to go back to TWRP 2.5.0.2 however odin keeps failing on me when it goes to Auth. any ideas as to why I am getting tired of the freezing in 2.6. I tried a zip that was supose to be able to flash recovery and now i get unauthorized software yellow triangle..phone still boots though. Oh and I cannot get ADB to work either says no devices..i do have the Samsung USB drivers installed
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Travisdroidx2 said:
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Click to expand...
Click to collapse
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Sidewind75 said:
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Click to expand...
Click to collapse
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Travisdroidx2 said:
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Click to expand...
Click to collapse
As stated above I cannot get odin to work it keeps failing
Sidewind75 said:
As stated above I cannot get odin to work it keeps failing
Click to expand...
Click to collapse
Stupid question you are flashing it in PDA and not phone tab correct?
Travisdroidx2 said:
Stupid question you are flashing it in PDA and not phone tab correct?
Click to expand...
Click to collapse
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Sidewind75 said:
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Travisdroidx2 said:
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Click to expand...
Click to collapse
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Sidewind75 said:
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Click to expand...
Click to collapse
Glad you got it up and running!
Hi Devs,
I am stuck in a issue. I installed cm 12.0 (unofficial rom) to my Galaxy s3 GT-i9300 everything was working fine but suddenly it keeps on crashing randomly one day while calling my phone froze. I restarted the phone it stucked on SAMSUNG BOOT SCREEN.
I can go into download mode and recovery mode, currently using PhilzTouch 6 on recovery.
Things I have tried already.
Wiped Cache Partition
Wiped Data/Factory Reset
when i try to wipe cache or factory reset i get errors
E: can't mount /data or Formatting /sdcard/.android_secure
For some reason my phones internal memory is on the read only mode i tried to flash the stock rom as well so far no luck.
I tried 4 different stock roms none of them work they all stopped on nand write or setup connection
I followed the instruction below because thats what exactly happened to my phone but no luck when ever i try to load boot files into PDA it keeps failing.
http://forum.xda-developers.com/showthread.php?t=1840030
please guys i am tired and exhausted trying all different stuff guide me. I even tried PIT Files noting work. Thanks in advance
Try going back to stock/factory.
Boot in download mode (vol down+home+power).
Use Odin to flash stock recovery and firmware.
Once you are able to boot perfectly into touchwiz, can narrow down your points of failure and try again or try another ROM
blu88 said:
Try going back to stock/factory.
Boot in download mode (vol down+home+power).
Use Odin to flash stock recovery and firmware.
Once you are able to boot perfectly into touchwiz, can narrow down your points of failure and try again or try another ROM
Click to expand...
Click to collapse
Hi Blue,
Thanks for reply , so you meant to say i replace philztouch with stock recovery.
Correct me if i am wrong.
Replace philz with stock recovery and replace your rom with touchwiz. Figure out where you went wrong and then flash your custom rom again or flash a different custom rom.
Try flashing another recovery. Worked for me once
Thanks for Help
Can you send me link for GT-i9300 International Stock Recovery so i am installing exact thing it would be great help from you guys and i would really appreciate it.
blu88 said:
Replace philz with stock recovery and replace your rom with touchwiz. Figure out where you went wrong and then flash your custom rom again or flash a different custom rom.
Click to expand...
Click to collapse
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
saqygee said:
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
Click to expand...
Click to collapse
saqyee, you placed the stock recovery file in the PDA section right? DO NOT TOUCH THE PIT SECTION.
saqygee said:
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
Click to expand...
Click to collapse
Nand write fail usually means emmc corrupt/damaged you could try the rescue firmware but this looks like hardware failure.
Sent from my LG-D855 using Tapatalk
Hi all,
I need help to fix the S3 that i have here, model GT-I9300, I don't know what happened but I cant boot the phone it is stuck at Galaxy S3 screen, I can enter in recovery and Download mode but I am not being able to flash anything using Odin and KIES also does not work, what I have tried:
Flash stock room using Odin;
Flash TWRP Using Odin;
Update firmware using KIES, I do put the model and serial number but the KIES give a message that is not possible to start the process;
Odin fails in anything that I tried to flash:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If I enter in the recovery mode i saw a lot of red messages saying that is not possible to mount E: bla bla.
Any help Is appreciated.
Looks like a SDS
MGSGS said:
Looks like a SDS
Click to expand...
Click to collapse
I googled for it and seems that there is no fix for it... so, good bye
Tried different USB cables and ports?
audit13 said:
Tried different USB cables and ports?
Click to expand...
Click to collapse
Yes, also different computers, I think that it is a sds
Confirmed the model # in download mode? Using the latest stock ROM from sammobile.com?
audit13 said:
Confirmed the model # in download mode? Using the latest stock ROM from sammobile.com?
Click to expand...
Click to collapse
Yes, also tried to flash twrp, stock recovery, everything fails....
Very simple and hard for me at the same time
Flashed twrp on my galaxy s6edge 925f and that was the only thing i did so far, after 1st reboot it started up, but on second time i tryed to restart phone and wiped system (think ) becouse it ways i dont have os installed, it stuck at samsung logo, smartswtich neither kies recognizes my phone (yes drivers are installed) have downloaded stock firmware and tryed to flash it via odin, but..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed
ok with odin 3.12 i have this error
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can please anyone help me out?
managed somehow make it to work, cloes please
if you have samsung kies also installed on your comp it wont work....
I have this problem , can you explain how you fixed it?
aryaazimi72 said:
I have this problem , can you explain how you fixed it?
Click to expand...
Click to collapse
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
callumbr1 said:
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
Click to expand...
Click to collapse
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
aryaazimi72 said:
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
Click to expand...
Click to collapse
Which rom are you on? And which BL are you flashing?
callumbr1 said:
Which rom are you on? And which BL are you flashing?
Click to expand...
Click to collapse
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
aryaazimi72 said:
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
Click to expand...
Click to collapse
Crisscross development has stopped. I recommend CarHD rom it is the best by far.
Make sure your flashing the roms through twrp