Related
Now i want to share my miui rom. I Taked over pauls Old miui rom and I am trying to fix things.
Almost everything works on the rom and it is stable.
It is minimalistic and fast! I always host it on 4shared,zippyshare or 2shared.
Working list
It boot
Hw works
Audio
Mic
2g/3g
Wifi
Vibration
Cypress and synaptic
And other
Dont working list
Camera
Fm radio
.............................
If you find any bug please report it.
Download link For alpha 1 http://www.2shared.com/file/Q7afDnfx/update-signed.html
Dont complain if it are named wrong on the update script and etc
screenshot?
Slash90[ITA] said:
screenshot?
Click to expand...
Click to collapse
I dont have test it yet this rom is for testers! I DONT have a mini pro any more
UhU ?!
Well, i tested it and the result was: it never passed the bootanimation, it stays looping there, i made a full wipe, i installed gapps and i also tried withou gapps but it didn't worked D:
art111 said:
Well, i tested it and the result was: it never passed the bootanimation, it stays looping there, i made a full wipe, i installed gapps and i also tried withou gapps but it didn't worked D:
Click to expand...
Click to collapse
Okay okay my friend tried it and it booted he said.
Do you have the nÁa ics kernel ?
If one tester said it dont boot i gonna take a look on it..
kopbem37 said:
Okay okay my friend tried it and it booted he said.
Do you have the nÁa ics kernel ?
If one tester said it dont boot i gonna take a look on it..
Click to expand...
Click to collapse
Uploading the new verision now. I think a found the boot issue
Downloading Now....
androidbpb said:
Downloading Now....
Click to expand...
Click to collapse
If it gets a bootloop trie to remove the battery and boot it again it can take very long time for miui to boot the first time
ROM Not Booted
Thanks to Dev. May be some more work is required.
androidbpb said:
Thanks to Dev. May be some more work is required.
Click to expand...
Click to collapse
I Think i contuine whit my old base...
Not Booting
I have waited for 20 minutes for booting but ROM not booting. It is stuck on MIUI bootanimation and the bootanimation is also off-center.
Note:
1. I wiped/factory reseted before installing the rom with nAa ICS kernel.
2. Rom is not booting with or even without gapps.
androidbpb said:
I have waited for 20 minutes for booting but ROM not booting. It is stuck on MIUI bootanimation and the bootanimation is also off-center.
Note:
1. I wiped/factory reseted before installing the rom with nAa ICS kernel.
2. Rom is not booting with or even without gapps.
Click to expand...
Click to collapse
Could you make a logcat for me ? that would be nice
I found the boot isue i think gonna fix it now and see . upload new verision soon
Waiting to test...!!
kopbem37 said:
I found the boot isue i think gonna fix it now and see . upload new verision soon
Click to expand...
Click to collapse
How can I provide the logcat when rom is not booted. I dont know. Waiting for the next release....hope it will boot...!!
on download page still showing "miuiv4 2.0.1_signed_by_enyblock.zip" not miui4 2.0.2 ....why? Have you uploaded the correct zip..!!
I tried to install it and it says: E: Error in /sdcard/miuiv4 2.0.1_signed_by_enyblock.zip (Status 6) Installation aborted
androidbpb said:
on download page still showing "miuiv4 2.0.1_signed_by_enyblock.zip" not miui4 2.0.2 ....why? Have you uploaded the correct zip..!!
Click to expand...
Click to collapse
I forget to rename it
Sent from my Desire HD using Tapatalk 2
tried to install got error (1st-try) then re copy the zip to SDCARD and tried again and got a different error (2nd try)
art111 said:
I tried to install it and it says: E: Error in /sdcard/miuiv4 2.0.1_signed_by_enyblock.zip (Status 6) Installation aborted
Click to expand...
Click to collapse
meer_mortal said:
tried to install got error (1st-try) then re copy the zip to SDCARD and tried again and got a different error (2nd try)
Click to expand...
Click to collapse
Seems like his install-script is a bit corrupted, it happens in the ROM-kitchen sometimes when translating from amend to edify scripting. It's an easy fix usually.
Hi guys can anyone tell me the step by step installation of xperia s ics cz the original thread is quite confusing. There are a lot of things to install and please give me the links to all the add ons. I'll be very thankful to you
Bigkiler5 said:
Hi guys can anyone tell me the step by step installation of xperia s ics cz the original thread is quite confusing. There are a lot of things to install and please give me the links to all the add ons. I'll be very thankful to you
Click to expand...
Click to collapse
Just some basic steps you should have already taken. Is your bootloader unlocked? Have you rooted it?
NikitoGR said:
Just some basic steps you should have already taken. Is your bootloader unlocked? Have you rooted it?
Click to expand...
Click to collapse
Yes I've unlocked bootloader and rooted and currently running wolf's rom and doom kernel
Bigkiler5 said:
Yes I've unlocked bootloader and rooted and currently running wolf's rom and doom kernel
Click to expand...
Click to collapse
Flash cm9 fxp kernel make sure rom is on sd crad boot int orecovery (when you see purple light press back button) and install the zip but make sure you factory reset and wipe syste m
mcsqwizzys98 said:
Flash cm9 fxp kernel make sure rom is on sd crad boot int orecovery (when you see purple light press back button) and install the zip but make sure you factory reset and wipe syste m
Click to expand...
Click to collapse
But the original thread has many things to flash which is confusing me
Bigkiler5 said:
But the original thread has many things to flash which is confusing me
Click to expand...
Click to collapse
1st. Download this kernel
2nd. Download: Rom 003, Rom 005, Launcher and Addons
3rd. Transfer all downloads from the 2nd step to your sd card.
4th. Move the kernel to the firmwares folder fo the Flashtool and flash it.
5th. When the led lits, press the back button to enter in the recovery mode.
------1st Flash the rom 003 and then the launcher. Reboot. Leave your phone to boot normally. Let it to settle some minutes. Reboot.
------2nd Enter in the recovery mode and flash the rom 005. Reboot and let it again to settle for some minutes. Reboot
------3rd Enter in the recovery mode and flash the addon. Reboot and you are ready to go.
6th. If you want the latest camera fixes go here and download the no hw fix from here
NikitoGR said:
1st. Download this kernel
2nd. Download: Rom 003, Rom 005, Launcher and Addons
3rd. Transfer all downloads from the 2nd step to your sd card.
4th. Move the kernel to the firmwares folder fo the Flashtool and flash it.
5th. When the led lits, press the back button to enter in the recovery mode.
------1st Flash the rom 003 and then the launcher. Reboot. Leave your phone to boot normally. Let it to settle some minutes. Reboot.
------2nd Enter in the recovery mode and flash the rom 005. Reboot and let it again to settle for some minutes. Reboot
------3rd Enter in the recovery mode and flash the addon. Reboot and you are ready to go.
6th. If you want the latest camera fixes go here and download the no hw fix from here
Click to expand...
Click to collapse
Thanks a lot and will it have those buttons at the bottom?
Bigkiler5 said:
Thanks a lot and will it have those buttons at the bottom?
Click to expand...
Click to collapse
Then check it here
NikitoGR said:
Then check it here
Click to expand...
Click to collapse
alright it means that these icons have to be added manually? I dont want these by the way
Bigkiler5 said:
alright it means that these icons have to be added manually? I dont want these by the way
Click to expand...
Click to collapse
Yes
Hi guys, i did mine yesterday.
everything works xcept whatsapp. It refuses to restore my chat history. i get this error message “The application whatsapp (process com,whatsapp) has stopped unexpectedly, please try later.
I reinstalled the app so many times and clearerd cache and data but nothing.
Have any of you had this issue?
Pls help
khakhi said:
Hi guys, i did mine yesterday.
everything works xcept whatsapp. It refuses to restore my chat history. i get this error message “The application whatsapp (process com,whatsapp) has stopped unexpectedly, please try later.
I reinstalled the app so many times and clearerd cache and data but nothing.
Have any of you had this issue?
Pls help
Click to expand...
Click to collapse
Delete the folder in the sdcard. I think it's named under whatsapp and/or it is in the android folder
Most of the things are fine but the music app is missing
I fully formated all phone and installed fresh new rom, but still phone freezes after 1min and restarts.
How can i fix it?
what model? what ROM? what kernel? does recovery work OK?
use adb from recovery
Glebun said:
what model? what ROM? what kernel? does recovery work OK?
use adb from recovery
Click to expand...
Click to collapse
i9300 and i was using LightForceROM. I got philz touch 5 recovery, but dont know how to mount internal storage, only sd ((
use adb to pull the files, search for guides
Glebun said:
use adb to pull the files, search for guides
Click to expand...
Click to collapse
I cant find any good tutorial :/
tukasz said:
I cant find any good tutorial :/
Click to expand...
Click to collapse
Stickys posted in GENERAL section .Or use Google .
jje
I fully formated all phone and installed fresh new rom, but still phone freezes after 1min and restarts.
How can i fix it?
tukasz said:
I fully formated all phone and installed fresh new rom, but still phone freezes after 1min and restarts.
How can i fix it?
Click to expand...
Click to collapse
Install this and use option 11 from main menu:
http://forum.xda-developers.com/showthread.php?t=1703488
If nbyou are trying to get files off your device.
rootSU said:
Install this and use option 11 from main menu:
http://forum.xda-developers.com/showthread.php?t=1703488
If nbyou are trying to get files off your device.
Click to expand...
Click to collapse
I got the files. But now I made CLEAN install and still phone freezes and restarts. HELP ME
Need details of your phone....
Which rom you installed?
Rooted?
How did you install?
When does it freeze?
How often?
When does it restart?
Did you read the "unusual freezing" thread in general?
Sent from my GT-I9300 using Tapatalk 2
hi,
so I keep getting updates and then my watch reboots, i think it installs something through TWRP and then i have to manually reboot it with TWRP. but I think the update fails. (it's going fast but I think A red line says "installation failed" and then it just goes to the TWRP homescreen)
somebody? I want to reflash a rom or restore but my lg g watch says my device is offline.....
what tool do you use?
grts
similar problem
liobeir said:
hi,
so I keep getting updates and then my watch reboots, i think it installs something through TWRP and then i have to manually reboot it with TWRP. but I think the update fails. (it's going fast but I think A red line says "installation failed" and then it just goes to the TWRP homescreen)
somebody? I want to reflash a rom or restore but my lg g watch says my device is offline.....
what tool do you use?
grts
Click to expand...
Click to collapse
i hope someone can help as well. i recently installed a custom rom and kernel. much better battery life. anyway, shortly after
i received a system update notification on the watch which cant be dismissed. i have to swipe left to install. click ok. then it
reboots to recovery. i dont know what to do at that point in TWRP i just reboot to system. then a couple hors later the
install update appears and i do it all over again. anyone have a solution? please and thanks.
jyesucevitz said:
i hope someone can help as well. i recently installed a custom rom and kernel. much better battery life. anyway, shortly after
i received a system update notification on the watch which cant be dismissed. i have to swipe left to install. click ok. then it
reboots to recovery. i dont know what to do at that point in TWRP i just reboot to system. then a couple hors later the
install update appears and i do it all over again. anyone have a solution? please and thanks.
Click to expand...
Click to collapse
What is happening is the 4.4W.2 update was released OTA and you're on a custom rom. The update won't take unless you restore to default or from a nandroid backup prior to flashing a custom rom. I was on Gohma and I went through the same problem. Restore to default and then the update will take. If not the annoying pop-up will drive you insane. Hope this helps.
m4tchb0x87 said:
What is happening is the 4.4W.2 update was released OTA and you're on a custom rom. The update won't take unless you restore to default or from a nandroid backup prior to flashing a custom rom. I was on Gohma and I went through the same problem. Restore to default and then the update will take. If not the annoying pop-up will drive you insane. Hope this helps.
Click to expand...
Click to collapse
ALTERNATIVELY, download (or find out where on the watch it has been downloaded) the update itself, put in /sdcard on watch and flash like normal rom with TWRP.
TjPhysicist said:
ALTERNATIVELY, download (or find out where on the watch it has been downloaded) the update itself, put in /sdcard on watch and flash like normal rom with TWRP.
Click to expand...
Click to collapse
I wasn't aware of this method. In doing this will the OTA flash over a custom rom? Do you need to wipe system/cache/dalvik before doing so?
m4tchb0x87 said:
I wasn't aware of this method. In doing this will the OTA flash over a custom rom? Do you need to wipe system/cache/dalvik before doing so?
Click to expand...
Click to collapse
OTAs will never flash over custom Rom, you need to flash back to stock. I didn't wipe, it was fine. This method is just if you don't want to wait for the popup (there IS a way to modv the ota zip so it will ignore inconsistencies in what it was expecting to see, but idk how and it didn't sound too stable)
TjPhysicist said:
OTAs will never flash over custom Rom, you need to flash back to stock. I didn't wipe, it was fine. This method is just if you don't want to wait for the popup (there IS a way to modv the ota zip so it will ignore inconsistencies in what it was expecting to see, but idk how and it didn't sound too stable)
Click to expand...
Click to collapse
That's what I assumed. I restored to my nandroid bak and then flashed 4.4W.2. I didn't wipe and then flashed Gohma 1.2. I had to install TWRP and root again. It's running smooth with great battery usage.
g watch
m4tchb0x87 said:
That's what I assumed. I restored to my nandroid bak and then flashed 4.4W.2. I didn't wipe and then flashed Gohma 1.2. I had to install TWRP and root again. It's running smooth with great battery usage.
Click to expand...
Click to collapse
continuously looping the boot animation. is the watch done?
imwatcinu a said:
continuously looping the boot animation. is the watch done?
Click to expand...
Click to collapse
What did you do before it went into a bootloop?
---------- Post added at 12:19 PM ---------- Previous post was at 12:11 PM ----------
imwatcinu a said:
continuously looping the boot animation. is the watch done?
Click to expand...
Click to collapse
You can try to reset the device (LG G watch) by the pinhole button on the back. If that doesn't work. Install this tool and follow the tutorial provided.
http://rootjunkysdl.com/?device=LG G Watch&folder=G Watch Script Tool
It's up and here https://developers.google.com/android/ota
gm007 said:
It's up and here https://developers.google.com/android/ota
Click to expand...
Click to collapse
Changelog?
Sent from my Pixel 3 using Tapatalk
nickporwal said:
Changelog?
Click to expand...
Click to collapse
https://source.android.com/security/bulletin/pixel/2018-12-01.html
One of this days the 'Check for Update' button will work damn it! Hahahaha
Hahaha right, I have been flashing the OTA manually, its no biggie for me I am used to manually flashing the ota now
AntLyoN2053 said:
One of this days the 'Check for Update' button will work damn it! Hahahaha
Click to expand...
Click to collapse
Can anybody sucessfully root again?
Just flash-all works fine, but after flashing magisk 17.3 again and reboot, phone instant restarts to recovery and tells me devices is corrupt.
AntLyoN2053 said:
One of this days the 'Check for Update' button will work damn it! Hahahaha
Click to expand...
Click to collapse
I got it through ota 1 hour ago.
gm007 said:
I got it through ota 1 hour ago.
Click to expand...
Click to collapse
You know Im mashing the button, lol. Only google phone that got all the updates pretty much same day was the Nexus 6P, I used to get the update notification even before any site would announce that it was out
Bluffer94 said:
Can anybody sucessfully root again?
Just flash-all works fine, but after flashing magisk 17.3 again and reboot, phone instant restarts to recovery and tells me devices is corrupt.
Click to expand...
Click to collapse
Same, not able to root with beta or canary builds atm.. seems to just boot back to twrp every time.
sulpher said:
Same, not able to root with beta or canary builds atm.. seems to just boot back to twrp every time.
Click to expand...
Click to collapse
I've rooted with 17.3 without a problem. Are you just booting into twrp, not flashing it?
Sent from my [device_name] using XDA-Developers Legacy app
Bluffer94 said:
Can anybody sucessfully root again?
Just flash-all works fine, but after flashing magisk 17.3 again and reboot, phone instant restarts to recovery and tells me devices is corrupt.
Click to expand...
Click to collapse
sulpher said:
Same, not able to root with beta or canary builds atm.. seems to just boot back to twrp every time.
Click to expand...
Click to collapse
Do you have the Magisk uninstaller on your phone? Run it from the temp TWRP .img, and then it should boot OK. Go back to temp TWRP, and install Magisk again. The Edge Sense Plus module is broken again. Don not reinstall it until fixed.
Bluffer94 said:
Can anybody sucessfully root again?
Just flash-all works fine, but after flashing magisk 17.3 again and reboot, phone instant restarts to recovery and tells me devices is corrupt.
Click to expand...
Click to collapse
sulpher said:
Same, not able to root with beta or canary builds atm.. seems to just boot back to twrp every time.
Click to expand...
Click to collapse
Flash all after removing the -w, rebooted and let it finish. Boot to TWRP and installed the latest canary. Did not install TWRP.
All good.
jd1639 said:
I've rooted with 17.3 without a problem. Are you just booting into twrp, not flashing it?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Ah figured it out, edge sense broken.
edit- thanks guys~
sulpher said:
Ah figured it out, edge sense broken.
Click to expand...
Click to collapse
There's no magic. I sideload the ota in the stock recovery. Booted into the system to make sure everything worked. Powered off the device and booted into the bootloader. Then booted twrp and flashed magisk. Then booted into the system. That's it.
Sent from my [device_name] using XDA-Developers Legacy app
No OTA here... It usually comes days later with unlocked Google pixel using TMobile. -.-
Installed the full version to update it, root just after and everything's fine!
There is only the edge sense that is'nt working as already told
TWRP keeps getting error 1 when flashing the OTA, bit odd
The TWRP for this device has never been able to side-load the OTA it always errors out. I just use the full firmware and take out the -w and all good.
laill said:
TWRP keeps getting error 1 when flashing the OTA, bit odd
Click to expand...
Click to collapse
Archangel said:
The TWRP for this device has never been able to side-load the OTA it always errors out. I just use the full firmware and take out the -w and all good.
Click to expand...
Click to collapse
So then how do we flash the OTA and keep root? Pardon my ignorance on the matter but taking out the -w, do you mean through terminal on the device or flashing with adb or something? Just need a little more detail.
I am used to putting the OTA on the device and flashing through TWRP then flashing TWRP&Magisk again before a full restart.
Once again I am new to this style of flashing so sorry for asking a dumb question.
What I do is download the full updated firmware, unzip that in your platform tools folder,,,make sure you also unzip the second zip inside there as well. If you have the Pixel edge module installed uninstall it and I also uninstalled Magisk in TWRP before I updated just in case there were any problems. Then find the flash-all.bat file in your platform tools folder, right click on it, open with notepad+ and find the -w at the bottom and delete it. After this, save the flash-all.bat notepad xml file and do not just close it. You can then flash the full firmware without it deleting your user data. After this you will have to fastboot boot TWRP and flash the TWRP zip over again. I rebooted then used TWRP to flash the Magisk 17.1 zip. I am up and running and did the same thing last month for the Nov update,,,hope this helps.
Rumsfield said:
So then how do we flash the OTA and keep root? Pardon my ignorance on the matter but taking out the -w, do you mean through terminal on the device or flashing with adb or something? Just need a little more detail.
I am used to putting the OTA on the device and flashing through TWRP then flashing TWRP&Magisk again before a full restart.
Once again I am new to this style of flashing so sorry for asking a dumb question.
Click to expand...
Click to collapse