Hi there,
I have a problem with my 3G stick to connect. I putted my 3G stick to my computer and I could connect easily! But when try to connect with my tablet, it don't connect. Every settings on my computer and tablet are same expect access number! On my PC, there is a settings call "Access Number" and it have *99# value. But there is no settings like that on my tablet. How can I connect with my tablet?
Thanks for your help!
Masih60 said:
Hi there,
I have a problem with my 3G stick to connect. I putted my 3G stick to my computer and I could connect easily! But when try to connect with my tablet, it don't connect. Every settings on my computer and tablet are same expect access number! On my PC, there is a settings call "Access Number" and it have *99# value. But there is no settings like that on my tablet. How can I connect with my tablet?
Thanks for your help!
Click to expand...
Click to collapse
Try enabling the 3g then rebooting
Psi.
Related
Ok, I looked on the WIKI and searched the site for a solution and was unable to find one.
Here is my problem. I have wireless internet at my house. My access point works fine. My laptop and PS3 connect to with no problem at all. My Touch pro connects to it with no problem. But, after I connect to the WIFI (and verify it is connected) I cannot use it?
I tried to open opera = "site not found" try to open Skyfire = "site not found"
I cant even update my weather while connected to WIFI. So thats my problem. I can connect to WIFI but not use it!
ANY AND ALL HELP WILL BE GREATLY APPRECIATED. Thank you in advance. iko[
anyone....
I'm having the exact same problem...
Coldones said:
I'm having the exact same problem...
Click to expand...
Click to collapse
You and I are not the first. I researched this (in depth) and it is found on a lot of sites, people complaining about it....However, I have yet to find an answer, that is why I came here...these guys can usually solve some pretty complex stuff!
Hopefully someone answers soon......
bump
iko172302 said:
Ok, I looked on the WIKI and searched the site for a solution and was unable to find one.
Here is my problem. I have wireless internet at my house. My access point works fine. My laptop and PS3 connect to with no problem at all. My Touch pro connects to it with no problem. But, after I connect to the WIFI (and verify it is connected) I cannot use it?
I tried to open opera = "site not found" try to open Skyfire = "site not found"
I cant even update my weather while connected to WIFI. So thats my problem. I can connect to WIFI but not use it!
ANY AND ALL HELP WILL BE GREATLY APPRECIATED. Thank you in advance. iko[
Click to expand...
Click to collapse
I have the same problem... ps3s and all. The only difference is my network shows up on my TP but it displays half the signal strength my laptop and my ps3s show.
broche85 said:
I have the same problem... ps3s and all. The only difference is my network shows up on my TP but it displays half the signal strength my laptop and my ps3s show.
Click to expand...
Click to collapse
ok i fix it....very very easy...under the "WIFI" settings there is a box to check...next to the box it says "use IEEE 802.1X Network Access Control" check this box then under that is a choice for "EAP Type" choose the "smart card" connection....also turn off your data connection via the comm manager...for some reason my TP wont let me connect to WIFI when the data communication is enabled....good luck worked for me!
iko172302 said:
ok i fix it....very very easy...under the "WIFI" settings there is a box to check...next to the box it says "use IEEE 802.1X Network Access Control" check this box then under that is a choice for "EAP Type" choose the "smart card" connection....also turn off your data connection via the comm manager...for some reason my TP wont let me connect to WIFI when the data communication is enabled....good luck worked for me!
Click to expand...
Click to collapse
When I go into Settings, the Connections tab, and click on WiFi, I don't see any check boxes at all, let alone one for "Use IEEE ...".
I must be in the wrong menu/place. Could someone please help direct me to the right place?
you'll see the check boxes once you connect to a wifi..i also have wireless internet at my house, and can connect and use my wifi just fine.
try to install some app that block`s data connections from your mobile provider ... nodata for example, you can find a link to it on xda.
set all the other connections to disabled ... and you phone connection to GSM ... not GPRS, EDGE or something else ...
set your wi-fi connection to connect to the internet ... not to work.
this worked for me for a dlink 784 router, now i`m banging my head against a 524 (again DLink) and have the same problem it connects but does not get on the internet. the problem seems to come from the TP, some settings need adjusting but i didnt figure out which one yet ...
good luck
PS: for iko, i think you have your router set on enteprise security, not personal... for personal WPA, WPA2 with a PSK, and TKIP or AES encryption, the "use IEEE 802.1X Network Access Control" is checked and greyed out, and you do not have access to it on the TP
hey everybody here...i have a big problem here....
i jz get my htc 7 mozart this few day...BUT i can't get connect my home wifi network.....
the phone keep showing " Connection Unsuccesfull, your phone couldn't reach the wifi netwok...." even i use the right password......T_T
HELP HELP HELP!!!!!
Well i suppose you can see the network you are connecting
If you can't connect, try to change some options on your router and then try again. Make sure the network is working fine first, like connect a wireless PC to the network and check its status.
hi
after i got the mango update my wifi connection starts to not connect. in wifi setting sub menu it says connected but when i try to update some app or use ie it says check your internet connection.
is there any suggestions how can i solve this problem?
ekimcak said:
hi
after i got the mango update my wifi connection starts to not connect. in wifi setting sub menu it says connected but when i try to update some app or use ie it says check your internet connection.
is there any suggestions how can i solve this problem?
Click to expand...
Click to collapse
Go to WiFi settings. Tap and hold on the network you are connected. Select DELETE. Turn Off WiFi. Restart your phone, turn on WiFi and select your network.
Hope this helps.
I am trying to connect my Z2 to the computer wirelessly.
I connected to my toshiba laptop, Clicked "To transfer media files wirelessly, pair" on the phone,
and followed the instruction to setup Wireless Media Transfer.
Then I got the error when to pair network configuration, it says I cannot make the wireless connection
because I need to enable UPnP connection if firewalll is enable.
I have turn off the firewall, enable UPnP as suggested below, and checked my wireless router does support UPnP and is enabled.
http://windows.microsoft.com/en-us/windows/enable-disable-network-discovery#1TC=windows-7
But I still can't use wireless media transfer. Does anyone how to solve this?
Thanks in advance.
Have anyone got this working?
Yes this works with my device - but I had no issues so not sure why yours isn't working..
Did you connect via USB first? I connected via USB and then the notification on the phone said "click here to go wireless" - I did that and now I can go into xperia connectivity and connect wirelessly at any time! Great for transferring files without hassle :laugh:
deepgrass said:
Have anyone got this working?
Click to expand...
Click to collapse
Yes but I never got the problem you have. Try to Google the upnp problem?
Sendt fra min D6503
Yes I have connected usb during the setup.
It think it must relate to my computer or router setting.
Thanks for confirm it is working. I will give it another try.
EDIT: Got it working.
Although my computer say it have problem with UPnP. It actually have setup successfully.
To get it connect. Settings>Xperia Connectivity > USB Connectivity > Under Wireless media transfer
Click your Compter name and connect. Done !
Does this work on a Mac?
I can't see Mac on the setup option, but it is no ham to give it a try.
The fix is correct wireless transfers are working.
Thanks a lot ,
This was gold. this is what made it work for me.
Although my computer say it have problem with UPnP. It actually have setup successfully.
To get it connect. Settings>Xperia Connectivity > USB Connectivity > Under Wireless media transfer
Click your Compter name and connect. Done !
Hi guys,
I have a OPO with Lollipop, but I think this problem affects Android as a whole.
When my device cannot connect to a WiFi network, appears "connection error" in light gray under the name of the network (where usually appears "connected") and does not try to connect again.
Is there a setting somewhere to tell Android to keep trying to connect?
Usually when I arrive to my house, it detects Wifi when I'm still very far, does not succed to connect (obviously) and then does not try to connect again.
When I arrive to my workplace, it detects Wifi when I'm still in the elevator with poor reception, does not succed to connect and then does not try to connect to the same network again.
If I click "connect" manually then, it connects in a second.
What can I do?
Is there a setting somewhere to force to try to reconnect a few times before giving up?
Thanks in advance to any Android genius that could help me here.