Hi,
I've got a brand new P7500 and it's defaultstock ROM is laggy and awful.
Do I have any change to find a STABLE Android 4 distro, which can be used with 3G (I travel a lot), videos, music and the rest working?
I really appreciate your input! :thumbup:
Many thanks!
Sent from my GT-P7500 using xda app-developers app
Anyone? Please?
Sent from my GT-P7500 using xda app-developers app
Hi my friend...
just search for ICS 4.0.4 stock: 3G if you have one or you can use Jelly Bean ICS(it's ICS actually) in the Dev forum...
if you have WiFi version you can find BinDroid XTC WiFi ICS or FourthBar Revolution in the Dev forum...
Good luck...
init3 said:
Hi,
I've got a brand new P7500 and it's defaultstock ROM is laggy and awful.
Do I have any change to find a STABLE Android 4 distro, which can be used with 3G (I travel a lot), videos, music and the rest working?
I really appreciate your input! :thumbup:
Many thanks!
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
- download Android 4.0.4 firmware from sammobile based on your country (need to register first, then type P7500 in the search box which will display available firmware, then click "info" link it will display the details along with download link)
- download odin and make sure samsung drivers are installed so that the TAB is recognized by the PC when connected to it.
Instructions for Flashing Firmware:
1. Power off the tab
2. Press “Volume down + Power on” button till Samsung logo appears and release when you see 2 icons
3. Press “Volume down” to select “Android” which is the download mode and press “Volume up” button
4. Start Odin
5. Connect your device to PC via usb cable and make sure in Odin com port is selected automatically and displayed.
6. Click PDA and select *P7500*******.tar.md5 file. Make sure “Auto Reboot” & “F. Reset Time” rest are unchecked.
7. Click Start
8. Once done, it should display “succeed 1/ failed 0” in the log and it should restart the device.
9. If Tab stuck in the Samsung logo, don’t panic!!! Continue below steps.
10. Go in to recovery mode by power off, press “Volume down button + Power on” till past Samsung logo and release when you see 2 icons. Press “Volume down button” to navigate to left icon and press volume up
11. Select wip/factory reset and confirm (use volume up/down to scroll, power button to select the option)
12. Reboot.
Thanks guys!
Question: on the site you gave me I've only found, for my country - Romania, the specific Android 4 version is for Vodafone. I'm using Orange and with the stock version my tablet is blocked in Orange!
By using Vodafone image, is there a risk of not being able to use 3G with my Orange SIM?
Many thanks!
Sent from my GT-P7500 using xda app-developers app
arashtarafar said:
Hi my friend...
just search for ICS 4.0.4 stock: 3G if you have one or you can use Jelly Bean ICS(it's ICS actually) in the Dev forum...
if you have WiFi version you can find BinDroid XTC WiFi ICS or FourthBar Revolution in the Dev forum...
Good luck...
Click to expand...
Click to collapse
You mean that with stock 4.0.4 there is no 3G?
Sent from my GT-P7500 using xda app-developers app
Thank you,
This thread solved my issue, manage to install it, 3G is working, hurray!
Sent from my GT-P7500 using xda app-developers app
can i use a firmware that is not on my country?
on my country there was no ics 4 for p7500.
One guy said that he used Italy ROM even not in Italy and then he changed language.
So normally chose a english rom, for example.
Normally I think the answer is yes.
Sent from my GT-P7500 using xda app-developers app
villain_allain said:
can i use a firmware that is not on my country?
on my country there was no ics 4 for p7500.
Click to expand...
Click to collapse
Yes, you can.
Thanks.
Im downloading a firmware that is not the origin of the tablet.
Its 4.0.4 Hope it works on odin. Thanks.
Related
Hii i am new to s3
So can anyone guide me
How to install jellybean without rooting
???
Ballack94 said:
Hii i am new to s3
So can anyone guide me
How to install jellybean without rooting
???
Click to expand...
Click to collapse
1. Disconnect your phone from the computer
2. Start "Kies" update to latest version (if reqd)
3. Click "Tools" -> "Firmware Upgrade and Initialisation"
4. Enter "Model name" = GT-I9300 and click "OK".
5. Enter "Serial Number" on next screen and click "OK". (The Serial no. can be found on the sticker in the battery compartment. Eg: S/N: XXXXXX)
6. Click "OK" on next screen
7. The next screen will display the Firmware version {PDA:LJ5 / PHONE:LJ1 / CSC:LI7 (INU)}. Click "OK" to proceed.
8. Wait a while till the system downloads firmware upgrade components
9. Follow the instructions on next screen, connect the phone & switch to "Download" mode, click the check box to accept that you have read the information and click "Start Upgrade" to start the process.
10. The latest firmware will be downloaded and phone will restart with LJ5 installed.
Thanks a ton
What is this odin ??
Is it like rom manager for samsung ?
Sent from my GT-I9300 using xda app-developers app
Odin is windows software which you use to flash updates.
Firstly download the stock jb firmware of your choice. You will also find odin in the same download
Sent from my GT-I9300 using xda premium
Ohhhkay
To use odin
Should s3 needs to be rooted ???or without i can use it
Sent from my GT-I9300 using xda app-developers app
dibyajyoti said:
1. Disconnect your phone from the computer
2. Start "Kies" update to latest version (if reqd)
3. Click "Tools" -> "Firmware Upgrade and Initialisation"
4. Enter "Model name" = GT-I9300 and click "OK".
5. Enter "Serial Number" on next screen and click "OK". (The Serial no. can be found on the sticker in the battery compartment. Eg: S/N: XXXXXX)
6. Click "OK" on next screen
7. The next screen will display the Firmware version {PDA:LJ5 / PHONE:LJ1 / CSC:LI7 (INU)}. Click "OK" to proceed.
8. Wait a while till the system downloads firmware upgrade components
9. Follow the instructions on next screen, connect the phone & switch to "Download" mode, click the check box to accept that you have read the information and click "Start Upgrade" to start the process.
10. The latest firmware will be downloaded and phone will restart with LJ5 installed.
Click to expand...
Click to collapse
Is this 4.1.1 or 4.1.2?
Sent from my GT-I9300 using Tapatalk 2
TheSkyKnight said:
Is this 4.1.1 or 4.1.2?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
It's for 4.1.1
You'll need to install 4.1.2 through Odin, not Kies.
Sent from my GT-I9300 using xda app-developers app
For odin i my phone needs to be roooted
Sent from my GT-I9300 using xda app-developers app
Ballack94 said:
For odin i my phone needs to be roooted
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No. It does not have to be rooted to flash through Odin.
Sent from my GT-I9300 using xda app-developers app
Oomahey said:
It's for 4.1.1
You'll need to install 4.1.2 through Odin, not Kies.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Official update is out?
Sent from my GT-I9300 using Tapatalk 2
TheSkyKnight said:
Official update is out?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
It WAS out. Samsung withdrew the update.
http://forum.xda-developers.com/showpost.php?p=34262796&postcount=20194
Not sure, but I think you can only install through ODIN now. Never used Kies to update.
http://forum.xda-developers.com/showthread.php?t=1646610
Should i go for it official jelly bean
Or stay on 4,0,4
Sent from my GT-I9300 using xda app-developers app
Ballack94 said:
http://forum.xda-developers.com/showthread.php?t=1646610
Should i go for it official jelly bean
Or stay on 4,0,4
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Don't go for it. It is a battery hog.
I suggest you go for the ELK4 ROM. JB 4.1.2 Muuuuuuch better battery backup and newer JB version. Multi-window and Note 2 gallery!!
GPS does not work for me and few others but I am yet to come across any other issues.
Whee is it ?? Cannot find here ??
Can give me link
Sent from my GT-I9300 using xda app-developers app
Ballack94 said:
Whee is it ?? Cannot find here ??
Can give me link
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Cannot find!? What are you talking about? It is on the first page of SGS3 General page.
http://forum.xda-developers.com/showthread.php?t=1835931
How to take screenshot on Galaxy 5 Europa with rooted 4.2.1( JellyBean )????
In Cm7, when we press the power button there is an option for screenshot, but in 4.2.1 there is no option ...
Please Help !!!!
Go to settings, system, power menu and there you can choose it like in cm7
XdaNoob98 said:
Go to settings, system, power menu and there you can choose it like in cm7
Click to expand...
Click to collapse
Thanx for your help !!!!
No problem ^^
new way of taking screenshot
XdaNoob98 said:
Go to settings, system, power menu and there you can choose it like in cm7
Click to expand...
Click to collapse
is there any other way of taking screenshot on galaxy 5 ,, like using button .
I use CM10.1 .
no there isn´t
AW: [Q] Screenshot ??
Right, Galaxy 5 is the only device with no button combination for ss so far
Sent from my GT-I5500 using xda app-developers app
It IS possible to take ss via power menu.
You need to enable it in the settings.
I remember using it back when I was using CM10.1 so it is possible.
Look at: setting -> system (not sure about this one - I haven't used CM10.1 for a long time) -> power menu
Sent from my GT-I5500
Vagelis1608 said:
It IS possible to take ss via power menu.
You need to enable it in the settings.
I remember using it back when I was using CM10.1 so it is possible.
Look at: setting -> system (not sure about this one - I haven't used CM10.1 for a long time) -> power menu
Sent from my GT-I5500
Click to expand...
Click to collapse
I already told it to him so, please don't copy me. Don't get me wrong, brah
Sent from my Nexus 4 using xda premium
Hi,
Good day.
I have aoson M19 tablet and I forget my password
I download the latest firmware ICS 4 from szaoson.com and download the flash tool from the same site, then I did the below:
1 - I connect the tablet to the laptop and the tool identified the tablet.
2 - I select the firmware.
3 - I clicked on upgrade button but I got an error "Check chip Fail".
4 - I clicked on the restore button and I got the same error.
now, the device is not turning on I cannot see anything in the screen BUT I can connect to the tool.
Please help me
Thanks in advance.
The firmware was wrong I installed m11 firmware and it worked fine
Sent from my GT-P6200 using xda app-developers app
Oracle1977 said:
The firmware was wrong I installed m11 firmware and it worked fine
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Can you do this please.. Check if you have sound.. I installed M11c Android4.1 too and now I have no sound out or mic sound in. I have the M19G RK3066
Yes sound is OK....but I did not check the microphone.
The device I had may not be 3g
Sent from my GT-P6200 using xda app-developers app
CWM + Root for SAMSUNG Galaxy Pocket Neo ( GT-S5310 )
WARNING!!! This solution provided as is (with no warranty of any kind). Be careful because the described operations rather dangerous and possibly can brick your device. Author is not responsible for your device damage.
IMPORTANT: Usage of this method will affect the state of the "Custom BIN down" counter in your device. This means that you may have problems with official warranty.
Step 1. Getting software
1. Download Odin 3.0.7 here
2. Download CWM-based recovery here
3. Download update package for rooting here (downloaded from here Thanks to Phil3759)
4. Install Samsung drivers\kies this page (This link is for S5301 but it works ok for S5310 in current case)
P.S. Sorry for ugly file storage solution - google drive. If it will open the zip archive just click "File" menu and click "Download" (or use Ctrl+S combo).
Step 2. Flash the updates
1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.
2. Run ODIN 3.0.7. Don't change any setting (checkboxes ) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38") - if not check if your USB port is functional and Samsung drivers installed correctly.
3. Click on PDA button and chose CWM recovery file saved during step 1.2. Don't rename or decompress the file - otherwise it will not work.
Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.
4. Copy update package for rooting on SD card and put the card in device's slot.
5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply update from external card" and press power button to commit operation. Then navigate to Root_Superuser_3.1.3......zip file and press power button again.
Notice: you can use sideload feature instead of using SD card: in recovery run "update from sideload" and on your computer run the following command:
adb sideload rooting_package_filename
6. Done. Your device should be rooted now. You can check it with various free programs like Root Checker available at Google Play.
Enjoy
Sorry for being such a chicken, but, before I try this myself, is there any feedback from others? If not, I'll probably take the chance in a couple of days and post my results here.
I tried this tonight. The good news is my phone is not bricked :good:
The bad news is my phone is not rooted
Everything worked as described until the last stage - in recovery I keep getting the message
E: failed to verify whole-file signature
E: signature verification failed
Click to expand...
Click to collapse
The other thing I'm curious about is that my recovery mode looks suspiciously like the vanilla Samsung recovery, although I only looked at that once, so I can't be sure. According to ODIN, the update was successful.
How can I check the type of recovery mode installed on my phone?
Thanks again for your efforts, and for any further advice you can provide.
Guys i tried yesterday and this guide goes very well....now my galaxy pocket neo is rooted
But there are no roms for this phone
works awsome
Johnny199314 said:
works awsome
Click to expand...
Click to collapse
You know if there are custom roms for our device?
Sent from my GT-S5310 using xda premium
diego88it said:
You know if there are custom roms for our device?
Sent from my GT-S5310 using xda premium
Click to expand...
Click to collapse
NO
Johnny199314 said:
NO
Click to expand...
Click to collapse
You wanna help me to make one?
Sent from my GT-S5310 using xda premium
diego88it said:
You wanna help me to make one?
Sent from my GT-S5310 using xda premium
YEP:good:
Click to expand...
Click to collapse
Johnny199314 said:
diego88it said:
You wanna help me to make one?
Sent from my GT-S5310 using xda premium
YEP:good:
Click to expand...
Click to collapse
Write to me a PM then we see what we are doing
Sent from my GT-S5310 using xda premium
Click to expand...
Click to collapse
diego88it said:
Johnny199314 said:
Write to me a PM then we see what we are doing
Sent from my GT-S5310 using xda premium
Click to expand...
Click to collapse
???
Click to expand...
Click to collapse
Johnny199314 said:
diego88it said:
???
Click to expand...
Click to collapse
cause i wanna make a custom but i need some help...
Click to expand...
Click to collapse
diego88it said:
Johnny199314 said:
cause i wanna make a custom but i need some help...
Click to expand...
Click to collapse
i dont know anthing about making a rom
Click to expand...
Click to collapse
A custom Rom utilising the built in bluetooth 4.0 btle would be very popular with cyclists and runners as it would work with the heart rate sensors
And cheap, small but light
Must be on 4.3 or higher
We just need to find some one to make one (even just stock!)
m.r.davies said:
A custom Rom utilising the built in bluetooth 4.0 btle would be very popular with cyclists and runners as it would work with the heart rate sensors
And cheap, small but light
Must be on 4.3 or higher
We just need to find some one to make one (even just stock!)
Click to expand...
Click to collapse
ye please search some1 who would help us with custom ROM
I would help..i also have a custom almost ready but i have a small problem with the updater-script
Sent from my GT-S5310 using xda premium
Rooted sucessfully my elder brother's Pocket Neo after purchased this phone. Thanks.
Should we make a development thread for Pocket Neo S5310?
Sent from my GT-S5300 using Tapatalk 2
Deleted.. I was wrong.
luqman98 said:
Rooted sucessfully my elder brother's Pocket Neo after purchased this phone. Thanks.
Should we make a development thread for Pocket Neo S5310?
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
I think we should. How can we do that ?
chrono_trigger said:
I think we should. How can we do that ?
Click to expand...
Click to collapse
Just create a thread :3
hello guys. I'm from india n i'v a gs3 i9300xxemc2 unrooted.. The problem is i'm still unable to receive jelly bean 4.3 update . My cousin has gs3 as well with indian stock rom.. He has successfully upgraded his gs3 to 4.3 . But every time i try it says i have already got the latest updates.. But i'm still running on 4.1.2 . Please suggest me what should i do to get 4.3 updates ota.. thanks.!! N sorry for my poor english
kaRiZMaTikeNiGMA said:
hello guys. I'm from india n i'v a gs3 i9300xxemc2 unrooted.. The problem is i'm still unable to receive jelly bean 4.3 update . My cousin has gs3 as well with indian stock rom.. He has successfully upgraded his gs3 to 4.3 . But every time i try it says i have already got the latest updates.. But i'm still running on 4.1.2 . Please suggest me what should i do to get 4.3 updates ota.. thanks.!! N sorry for my poor english
Click to expand...
Click to collapse
Problem is with carrier. Not country.
Sent from my GT-I9300 using xda app-developers app
please explain. .
JellyYogurt said:
Problem is with carrier. Not country.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
sorry but I didn't get your mean.. well mine gs3 is unbranded n right now I'm using airtel. do I need to use wi-fi for updating or what..!! sorry I'm a noob please help
Check your CSC code matches your country, or follow the guide in general forum, sticky thread on how to flash the correct stock rom for your country.
kaRiZMaTikeNiGMA said:
hello guys. I'm from india n i'v a gs3 i9300xxemc2 unrooted.. The problem is i'm still unable to receive jelly bean 4.3 update . My cousin has gs3 as well with indian stock rom.. He has successfully upgraded his gs3 to 4.3 . But every time i try it says i have already got the latest updates.. But i'm still running on 4.1.2 . Please suggest me what should i do to get 4.3 updates ota.. thanks.!! N sorry for my poor english
Click to expand...
Click to collapse
If you are in warranty you can go to nearest service center. ..and they cn do that for free...or if not then they will charge you 100 rs..I think my friend got his update only by going there and notby ota...
Sent from my GT-I9300 using xda app-developers app
kunal1540 said:
If you are in warranty you can go to nearest service center. ..and they cn do that for free...or if not then they will charge you 100 rs..I think my friend got his update only by going there and notby ota...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
ow okey.. thanks a lot sir for the info.. well mine is out of warranty period.. :/
boomboomer said:
Check your CSC code matches your country, or follow the guide in general forum, sticky thread on how to flash the correct stock rom for your country.
Click to expand...
Click to collapse
it doesn't match.. btw thank you
will it work if i flash csc of our region ..??
kaRiZMaTikeNiGMA said:
it doesn't match.. btw thank you
will it work if i flash csc of our region ..??
Click to expand...
Click to collapse
Factory reset in recovery after flashing full rom with correct csc then yes, it should.
boomboomer said:
Factory reset in recovery after flashing full rom with correct csc then yes, it should.
Click to expand...
Click to collapse
oh.. you mean I need to flash another stock rom for indian region.. !!
Here is another suggestion !
You should download the stock rom of JB 4.3 for india !
You can find it on sammobile.com website just download it !
After downloading just put that stock into your computer and sd card after just press your home key button, the power button and vol down button !
Just press these simultaneously !
A window would apear showing a sign of (!) this .
Just press the button vol up or vol down to get into the downloading mode ! And let your sgs3 in that condition !
Then on your pc just download (Odin) software and then just click on to the PDA and let other setting as default and when you click on PDA a window wiĺl apear there you just go to the exact location where you have put the downloaded 4.3 JB stock rom for india !
Then clivk on that rom !
That rom address on the PDA option and after juat click on the start button but be confirmed that your s3 is in downloading mode if your s3 is in downloading mode, on Odin software it will indicate that whether your device is connected to your PC or not !
And click on start button the produce will continue to start and after 5 mins it will be done and ur s3 will reboot and finnally you wiĺl be on stock 4.3 !
Trust me this is the official rom !
I am also using this stock rom by this method .!
Plz hit on the LIKE button if you guys like my work and the official method !
GOOD LUCK just try out this and if you found any problem just reply me and don"t forget to thanks me. !!
Sent from my GT-i9300 using xda premium
---------- Post added at 04:21 PM ---------- Previous post was at 03:53 PM ----------
Here is another suggestion !
You should download the stock rom of JB 4.3 for india !
You can find it on sammobile.com website just download it !
After downloading just put that stock into your computer and sd card after just press your home key button, the power button and vol down button !
Just press these simultaneously !
A window would apear showing a sign of (!) this .
Just press the button vol up or vol down to get into the downloading mode ! And let your sgs3 in that condition !
Then on your pc just download (Odin) software and then just click on to the PDA and let other setting as default and when you click on PDA a window wiĺl apear there you just go to the exact location where you have put the downloaded 4.3 JB stock rom for india !
Then clivk on that rom !
That rom address on the PDA option and after juat click on the start button but be confirmed that your s3 is in downloading mode if your s3 is in downloading mode, on Odin software it will indicate that whether your device is connected to your PC or not !
And click on start button the produce will continue to start and after 5 mins it will be done and ur s3 will reboot and finnally you wiĺl be on stock 4.3 !
Trust me this is the official rom !
I am also using this stock rom by this method .!
Plz hit on the LIKE button if you guys like my work and the official method !
GOOD LUCK just try out this and if you found any problem just reply me and don"t forget to thanks me. !!
Sent from my GT-i9300 using xda premium
Sent from my GT-i9300 using xda premium
same case here, u need to update to 4.3 using odin
mine is working now < got the update 4.3 oVEr the air>
Yup you are right this is the only method by updating s3 to official stock rom 4.3 ...!
Sent from my GT-i9300 using xda premium
good try but try to align your text!
oschamp said:
Here is another suggestion
You should download the stock rom of JB 4.3 for india !
You can find it on sammobile.com website just download it !
After downloading just put that stock into your computer and sd card after just press your home key button, the power button and vol down button !
Just press these simultaneously !
A window would apear showing a sign of (!) this .
Just press the button vol up or vol down to get into the downloading mode ! And let your sgs3 in that condition !
Then on your pc just download (Odin) software and then just click on to the PDA and let other setting as default and when you click on PDA a window wiĺl apear there you just go to the exact location where you have put the downloaded 4.3 JB stock rom for india !
Then clivk on that rom !
That rom address on the PDA option and after juat click on the start button but be confirmed that your s3 is in downloading mode if your s3 is in downloading mode, on Odin software it will indicate that whether your device is connected to your PC or not !
And click on start button the produce will continue to start and after 5 mins it will be done and ur s3 will reboot and finnally you wiĺl be on stock 4.3 !
Trust me this is the official rom !
I am also using this stock rom by this method .!
Plz hit on the LIKE button if you guys like my work and the official method !
GOOD LUCK just try out this and if you found any problem just reply me and don"t forget to thanks me. !!
Sent from my GT-i9300 using xda premium
---------- Post added at 04:21 PM ---------- Previous post was at 03:53 PM ----------
Here is another suggestion !
You should download the stock rom of JB 4.3 for india !
You can find it on sammobile.com website just download it !
After downloading just put that stock into your computer and sd card after just press your home key button, the power button and vol down button !
Just press these simultaneously !
A window would apear showing a sign of (!) this .
Just press the button vol up or vol down to get into the downloading mode ! And let your sgs3 in that condition !
Then on your pc just download (Odin) software and then just click on to the PDA and let other setting as default and when you click on PDA a window wiĺl apear there you just go to the exact location where you have put the downloaded 4.3 JB stock rom for india !
Then clivk on that rom !
That rom address on the PDA option and after juat click on the start button but be confirmed that your s3 is in downloading mode if your s3 is in downloading mode, on Odin software it will indicate that whether your device is connected to your PC or not !
And click on start button the produce will continue to start and after 5 mins it will be done and ur s3 will reboot and finnally you wiĺl be on stock 4.3 !
Trust me this is the official rom !
I am also using this stock rom by this method .!
Plz hit on the LIKE button if you guys like my work and the official method !
GOOD LUCK just try out this and if you found any problem just reply me and don"t forget to thanks me. !!
Sent from my GT-i9300 using xda premium
Sent from my GT-i9300 using xda premium
Click to expand...
Click to collapse
well Rom is also called firmware,and it can be downloaded via sammobile.com and can be flashed via odin and there is no need to put the firmware in sd-card just put it in any directory of your pc..(i am having mine in root directory i.e desktop or root of C)..
happy flashing for more info visit this..
and remember to hit thanks!!!!:good:
[Playboydroid] Okk ...!!
Just forget every thing
Sent from my GT-i9300 using xda premium
Post deleted [oschamp]...
Sent from my HTCSensation using xda app-developers app
playboydroid said:
First you are saying sorry and committing that you were wrong and now you are saying no need to point out mistakes....
Man just stick to one thing sorry or don't point out..
Are you really a human I'm in doubt now..
[Don't take it serious]
And there is no need to put the firmware in sd-card due to the firmware will not be lost during the procedure (I.e flashing)...
For now on stick to one thing and try to think what you are posting and thirdly follow xda-rules (one of them says respect other members)
As you are a junior member with post counts 6-7!
Edit: you have only provided sammobile.com while i had provided another xda post which described how to flash the firmware!!
So that the person can understand better from a senior member and the thread i linked is started by official Sammobile member...
Sent from my HTCSensation using xda app-developers app
Click to expand...
Click to collapse
I think u are disrespectful to him tbh. How much posts u have or whatever does not show ur intelligence in any way. Everyone is equal. No junior or senior. I can be a junior and speak properly and others MIGHT still understand me btr than others.
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 03:20 PM ---------- Previous post was at 03:14 PM ----------
playboydroid said:
well oschamp the thing you are saying rom is not called rom thats called firmware,and it can be downloaded via sammobile.com and can be flashed via odin and there is no need to put the firmware in sd-card just put it in any directory of your pc..(i am having mine in root directory i.e desktop or root of C)..
happy flashing for more info visit this..
and remember to hit thanks!!!!:good:
Click to expand...
Click to collapse
Anyway, wanna know sth before saying? A firmware means Read Only Memory. Hey guess wats the short form for Read Only Memory? U got it! ROM!!!
Sent from my GT-I9300 using xda app-developers app
Thanks but i was just teasing him because he's my pal friend...and I'm deleting post.......
Except this I'm respectable to everyone just check all my post...
Sent From My SGS IV GT-I9505 using Xda Developers app
playboydroid said:
Thanks but i was just teasing him because he's my pal friend...and I'm deleting post.......
Except this I'm respectable to everyone just check all my post...
Sent From My SGS IV GT-I9505 using Xda Developers app
Click to expand...
Click to collapse
Np
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
Np
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well i met him today and he's never angry on me cause friends for a long time...
Sent From My SGS IV GT-I9505 using Xda Developers app