[Q] GoClever Tab R75 how to root? - Android Q&A, Help & Troubleshooting

Can anyone please help me with this? I have HTC Sensation with CM10. This tablet without root is uselles...
Anyone?

How did you put CM10 on it without root?

post-mortem said:
How did you put CM10 on it without root?
Click to expand...
Click to collapse
Read carefully what I wrote.
I have HTC Sensation with cm10. Its my dailly driver.
Goclever R75 i bought becouse it was cheap But what is android without root? And I cant get any information about that on this tablet...

No one know how to do that?

Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!

is it function? no problems?

Yes this works. Ive done this 2 times

Hi! Can you please tell me how to instal drivers from that package?

If u dont know how 2 do that... Please do not root your device!

devgron said:
If u dont know how 2 do that... Please do not root your device!
Click to expand...
Click to collapse
Hi again, thanks for your concern but it's not my first time when a try to root a device. I have a sony x8 rooted and a rom on it but never needed to instal something like that to root so can you please tell me how do i get over that spep? Sorry for my english.

devgron said:
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
Click to expand...
Click to collapse
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?

Kurjak78 said:
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Click to expand...
Click to collapse
Hi, I have same problem. Did you get fix for this??

zefer79 said:
Hi, I have same problem. Did you get fix for this??
Click to expand...
Click to collapse
No. Fortunately I was able to exchange it for the new one.

Kurjak78 said:
No. Fortunately I was able to exchange it for the new one.
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.

orlairet conde
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
bugxyz said:
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
Click to expand...
Click to collapse

Kurjak78 said:
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
Click to expand...
Click to collapse
Hello!
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.

WIFI not working and sensor keys bad workimg
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
xxxx
I hope it helps you.
Bye.
Click to expand...
Click to collapse
:/ after install to "bricked" goclever tab r75 android from link xxx provided by bugxyz android run. .. wifi not working and senzor keys are shifted please help me :/ sorry for my bad english i am czech and the screen is shifted

Hello.
If you have those problems it means that you have an goclever tab 7500 and not an R 75. I saw that some contries 7500 was sold as R 75.
I had the same problem as you when I have flashed my R 75 with 7500 firmware.
I will upload also the 7500's firmware and provide the link when it is uploaded.
I hope this will help you.
Ps: 7500 firmware is unrooted.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
Sent from my LG-P990 using Tapatalk

thx
Thank you very much, it helped. how should I do to make me root it got broken again

declara kvide
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
I hope it helps you.
Bye.
Click to expand...
Click to collapse
Bugxyz, you are a savior. Thank you.

Related

[Q] graghic problem p7500

hi guys
i have very very big problem so cant do anything now!!
first week when i bought tab 10.1(3g+ wifi) , i get root with this
warning : don't use this any way : warning
this way very easy : without any change copy this to tab & let it from recovery mode
everything goes very well until i Decide to install cmw , busybox
in this time's so tab let graphic problem
of course with install a rom (P7500JPKL2_P7500OJPLB1_P7500XXKL3_HOME.tar.md5)
only graphic problem resolve
since yesterday i decided to change everything
told me :install stock rom & install cmw , reroot , busybox & ...
go stock rom (P7500OXAKI1_P7500XXKI1_P7500XXKI1_HOME.tar.md5)
after install this everything was bad
now i have graphic problem in boot , download mode , recovery ,... every where
of course i can install rom hard (with problem can sense where are you)
but with both of rom not changed
i realize problem is rooted then to make change with change the rom
it seems the problem is software
how can re wright everything as first (boot loader , rom , ...)
please help me
sorry fo bad english
regards.
I can hardly understand that... But if you want to go stock go to SamMobile.com and go to the firmware section.. Once there use the search option and look for p7500, choose a stock Rom from the list and download..
Once done, install Kies to get the drivers, with drivers installed put the tablet in Odin mode (turn it off then press volume down+power) select the download mode and connect the tablet to the computer.
Once done, open Odin and don't change any option there.. Go to pda and select the file you downloaded from SamMobile and Press start..
That's it
Sent from my Galaxy Nexus using xda premium
hi
thank for replay
forgot first post
my new problem is : boot loader was remove
a tools & boot loader to write
sorry for bad english
no any way to install ubuntu Instead of android
http://www.ubuntu.com/devices/android/features-and-specs
[email protected] said:
no any way to install ubuntu Instead of android
http://www.ubuntu.com/devices/android/features-and-specs
Click to expand...
Click to collapse
Over in the development thread there is this... little bit over my head, but have a like at it.
http://forum.xda-developers.com/showthread.php?p=16058447
The only problem with that link you posted is that you'll need working Android OS, so you would still need to get your Tab up and running again. Also from what I've read in that link its not an Ubuntu os that runs natively on our Tabs. It sounds like it just uses your device as a host or something, it only boots up when your device is docked to a computer and uses its screen, keyboard and mouse.
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
Over in the development thread there is this... little bit over my head, but have a like at it.
http://forum.xda-developers.com/showthread.php?p=16058447
The only problem with that link you posted is that you'll need working Android OS, so you would still need to get your Tab up and running again. Also from what I've read in that link its not an Ubuntu os that runs natively on our Tabs. It sounds like it just uses your device as a host or something, it only boots up when your device is docked to a computer and uses its screen, keyboard and mouse.
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
Actually you just have to connect it on a screen with HDMI. No need for a computer. Somehow Ubuntu takes over when it detects HDMI out from the dock. It has to be a pretty decent device though. At least dual core and one gigabyte ram... Oh well, we just have to wait until canonical releases it!
Sent from my Nokia 3210
hi
thank for replay
no any idea for bootloader for android3.2
(http://forum.xda-developers.com/showthread.php?p=16058447)
i can use it as 3g version & get 3g future
1-it's better than ubuntu on busybox or no & anyone can talk with it
2-touch problem resolve or not
3-anyone can overclock to better performance
please help me
i need bootloader for my tablet(android 3.2)
I showed the device to serviceman & he said me fee's between 80-90$
sorry for bad english
thank again.
Im really concerned... ir you are not able to read or write english and can not even get your tab back to stock how in hell did you went through flashing ubuntu to a tablet , also managed to blow up your bootloader doing so... why in hell do you even need ubuntu on a tablet? there's no app store and it's glitchy as hell... Also no hwa and no 3g modem only wifi.... If you manage to get to Odin mode follow the instructions I gave you or go pay your 90$ for repairings and for God sake stay away from modifying ANY device until you can properly read English and follow instructions....
may I ask you where are you from? If you talk Spanish you can pm me and I can help you better
Sent from my GT-P7500 using xda premium
msedek said:
Im really concerned... ir you are not able to read or write english and can not even get your tab back to stock how in hell did you went through flashing ubuntu to a tablet , also managed to blow up your bootloader doing so... why in hell do you even need ubuntu on a tablet? there's no app store and it's glitchy as hell... Also no hwa and no 3g modem only wifi.... If you manage to get to Odin mode follow the instructions I gave you or go pay your 90$ for repairings and for God sake stay away from modifying ANY device until you can properly read English and follow instructions....
may I ask you where are you from? If you talk Spanish you can pm me and I can help you better
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
I don't think he installed Ubuntu... I think he may have flashed the wrong rom with a different bootloader... But ya OP I'm having a hard time understanding exactly what you need and how we can go about helping you more...
Can you link us to the files you used to root and any thing you flashed to your Tab?
Sent From My Galaxy10. 1 Class Starship...
hi
thank for replay
i'm iranian(persian) & my language is farsi
sorry for bad english :laugh:
forgot everything i posted
first of thing i need fix & recover my tablet:
i need bootloader
next : i like test ubuntu:
on android with busybox
"important of all i need to fix my tab & recover it to android 3.2
so
i need bootloader with tool's needed"
then safe way to root->cmw->busybox->linux
[email protected] said:
hi
thank for replay
i'm iranian(persian) & my language is farsi
sorry for bad english :laugh:
forgot everything i posted
first of thing i need fix & recover my tablet:
i need bootloader
next : i like test ubuntu:
on android with busybox
"important of all i need to fix my tab & recover it to android 3.2
so
i need bootloader with tool's needed"
then safe way to root->cmw->busybox->linux
Click to expand...
Click to collapse
1.- press power + volume down until the tablet turns on into bootloader and move to downloading with volume down... Once you are in downloading press volume up and you will be in Odin mode. (look at reference image at bottom)
2.-download samsung Kies here and install to get the drivers
3.-download samsung stock rom here search for P7500 and get a rom according to your country/region once downloaded unzip it
4.-get Odin here
5.-connect your tablet to pc (check your usb wire its good and use a back motherboard usb port) , open Odin and Press PDA, in PDA put the file you downloaded from sammobile and unziped then Press start (do not change any Odin's options from the check boxes)
6.-wait until process finish and then you are back to stock close Odin and by this time the tablet should be rebooting.
if you are not able to recover your tab with all this then go pay
Sent from my GT-P7500 using xda premium
image for point 1

[Q] Help with bricked tablet

Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Josefon said:
Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Click to expand...
Click to collapse
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
yellowumbrella said:
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
Click to expand...
Click to collapse
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Josefon said:
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Click to expand...
Click to collapse
As long as your tablet is out of APX, you should be able to just go ahead and follow this
http://forum.xda-developers.com/showthread.php?t=1864774
to get updated to the latest CM10

[Q] STAR N9977 6 inch android phone

well i just bought this bootlegged android phone and its amazing. but the only thing thats holding me back is the 4.0.9 and the fact that it lags on big games. so i was wondering if there is a root for the N9977 phone, i've searched multiple webs and did not find so if you can please tell me where is is.
mahmoud20304 said:
well i just bought this bootlegged android phone and its amazing. but the only thing thats holding me back is the 4.0.9 and the fact that it lags on big games. so i was wondering if there is a root for the N9977 phone, i've searched multiple webs and did not find so if you can please tell me where is is.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1886460
Sent from my Android Smartphone
dkmali said:
Try this
http://forum.xda-developers.com/showthread.php?t=1886460
Sent from my Android Smartphone
Click to expand...
Click to collapse
says normal mode=xperia phones
would that be just for those phone or i can use it for my phone aswell. i want to be careful so i wont brick it.
mahmoud20304 said:
well i just bought this bootlegged android phone and its amazing. but the only thing thats holding me back is the 4.0.9 and the fact that it lags on big games. so i was wondering if there is a root for the N9977 phone, i've searched multiple webs and did not find so if you can please tell me where is is.
Click to expand...
Click to collapse
I have the same phone but mine is running android 4.0.4 can I ask you if your magnetic sensor is working? I mine is a yamaha530 but it doesn't give out data...
And please let me know if you find something, i've been searching high and low... I've even offered fastcardtech a free ftp server for all their Roms on talkingmobi.com if they can help us... Same as you I want to find out if we can use the "root many mtk65xx" here on Xda.. But I'm not really up to just testing and bricking it..
I received a reply from the phone supplier with a way to root th phone, I'll test it ASAP and post the results
mahmoud20304 said:
well i just bought this bootlegged android phone and its amazing. but the only thing thats holding me back is the 4.0.9 and the fact that it lags on big games. so i was wondering if there is a root for the N9977 phone, i've searched multiple webs and did not find so if you can please tell me where is is.
Click to expand...
Click to collapse
So i managed to root my N9977 this is how:
Download this rar first: www.anniblue.com/xda/rootingn9977.rar
1. Enable usb debugging and connect the phone to your pc.(win xp/ wista/ 7/ 8)
2. Install Snappea and download the usb driver within Snappea, when the phone is recognized, pls turn Snapped off and click do not remember it
3. Go to pc task manager- process- kill wandoujia helper.
4. Extract MTK6577 One Key Root to your pc, and click one key root.bat, then press enter on your keyboard then on your phone there should pop up a restore screen choose restore My Data (No need to type the password). Then the phone will auto reboot twice.
Meanwhile do not touch anything on your phone or pc, or the phone will get bricked.
5. Check menu- if there is an “#” icon, if yes, it’s rooted, or do it again.
The one key root.bat is all in Chinese or some strange language but no need to do anything but click enter after you open it. Then after its installed you will get a Chinese superuser apk but just download superuser from play store and run a binary update in the new one and you'll be fine
Enjoy
I got this from the fascardtech tech support but I had to rewrite the guide as it seemed translated with Google from Chinese.
hi stock firmware files needed
zozew said:
So i managed to root my N9977 this is how:
Download this rar first: www.anniblue.com/xda/rootingn9977.rar
1. Enable usb debugging and connect the phone to your pc.(win xp/ wista/ 7/ 8)
2. Install Snappea and download the usb driver within Snappea, when the phone is recognized, pls turn Snapped off and click do not remember it
3. Go to pc task manager- process- kill wandoujia helper.
4. Extract MTK6577 One Key Root to your pc, and click one key root.bat, then press enter on your keyboard then on your phone there should pop up a restore screen choose restore My Data (No need to type the password). Then the phone will auto reboot twice.
Meanwhile do not touch anything on your phone or pc, or the phone will get bricked.
5. Check menu- if there is an “#” icon, if yes, it’s rooted, or do it again.
The one key root.bat is all in Chinese or some strange language but no need to do anything but click enter after you open it. Then after its installed you will get a Chinese superuser apk but just download superuser from play store and run a binary update in the new one and you'll be fine
Enjoy
I got this from the fascardtech tech support but I had to rewrite the guide as it seemed translated with Google from Chinese.
Click to expand...
Click to collapse
hi can you please help me by giving stock firmware link or file ..i mean scatterfile n stuff..m totally bricked my phone..
need help ASAP...
thank you
Sorry I don't have that phone anymore but I made a thread with a link to a ton of roms for that phone, I belive there was a stock version there. Sadly the page is in Chinese but just use Chrome and you'll be OK...
Sent from my GT-I9305 using xda app-developers app
Do you still have the link to the thread?
zozew said:
Sorry I don't have that phone anymore but I made a thread with a link to a ton of roms for that phone, I belive there was a stock version there. Sadly the page is in Chinese but just use Chrome and you'll be OK...
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Hi zozew,
Do you have the link to the thread that you made?
I tried to google for n9977 rom and can hardly find any.
Thanks in advance.
I finally found the link through Google
http://www.mediafire.com/?2zh7vivwxty22
There are also other stuff here
http://bbs.ydss.cn/thread-207034-1-1.html
Hope it helps
Sent from my GT-I9305 using xda app-developers app
N9977 Android 4.1.1
zozew said:
I finally found the link through Google
There are also other stuff here
Hope it helps
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thank you zozew.
Does anyone out there has the original ROM for N9977 with Android 4.1.1?
I bricked my N9977 by rooting it with the N9776 root method... : (

[Q] Steps needed to ROOT Android CMP748

I bought a android tablet and it kinda blows at the moment. It is a
Android CMP748, android 4.1.1, kernel 3.0.36+ builder at server#1 WED APR 3.
Looking to Root it and need help with step and or guidance with help to get it done.
Thank you to anyone that can help.
Still need help with this also I found out it is a rockchip 2928 as well if this helps.
Sent from my C5170 using xda app-developers app
happy420 said:
I bought a android tablet and it kinda blows at the moment. It is a
Android CMP748, android 4.1.1, kernel 3.0.36+ builder at server#1 WED APR 3.
Looking to Root it and need help with step and or guidance with help to get it done.
Thank you to anyone that can help.
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=1886460
Thank you for the link. I am still a little confused on the steps. I have done the easy roots
Iike At&t GS2 and two tablets. With a one click root and switch ROMs. I am only now starting to learn to do this.
I will keep trying and any help would still be great.
I bricked my **** and i will pay anyone to fix it!!
It can find a chip set and stops
happy420 said:
I bricked my **** and i will pay anyone to fix it!!
It can find a chip set and stops
Click to expand...
Click to collapse
im sorry to hear that you bricked your tab im feeling kinda guilty was it the tool i showed you?
Trozzul said:
im sorry to hear that you bricked your tab im feeling kinda guilty was it the tool i showed you?
Click to expand...
Click to collapse
IT was that link, but it my fault =. I should have read and then did it. but any help would still be great
What i need is the firmware for it now.
happy420 said:
IT was that link, but it my fault =. I should have read and then did it. but any help would still be great
What i need is the firmware for it now.
Click to expand...
Click to collapse
alright first things first are you able to get into recovery or anything?
I can still get into the tablet through the usb. I even have a flash copy or back up of the system .img. I used a sdcard program to copy system files. I will look ups its name.
As for USB I can use a program called rockchip flasher and another one I again will look up. To upload the .IMG on to it. But other then that the screen stays black and nothing works. I asked icraigs company for help on downliads
Sent from my C5170 using xda app-developers app
I need a copy of someone with the same tablet ,img and cmw. Check to see if it is the same please and it will help me out a lot. Thank you
So I am dealing with iCraig and trying to get a replacement tablet. If I do I am going to try again. But I am going to post how to root it and img file need to do and then build my own ROM to go along with it. As soon as I learn to do that as well. LOL
Thank you to anyone that has stopped by and tried to help me out. Keep fingers cross.
Still looking for any help I can get.
The easiest way to root: find the update.zip for your device online. Download it and place it into the root of your phone, shut down your phone and reboot into recovery mode (volume up+home+power) then navigate with you volume buttons to apply update from sdcard (select with home). Select update.zip and wait, then reboot and BOOOM your rooted
If this helped you please dont hestitate to leave a thanks
Sent from my GT-S5360 using xda app-developers app
New Info Added
So after countless hours of time and work. I have this info and stuff to share. First off I never got it rooted or fix. What I do have is the .IMG for what I should have in my tablet. But the problem is the .IMG is made for a item I have never seen. Here are links to both my tablet and to the to the firmware I want try to install on my tablet:
http://www.craigelectronics.com/site/pdetails.php?id=420 ---- The Item drivers I want to install
http://www.craigelectronics.com/site/pdetails.php?id=574 ---- My tablet
???What I would like to do change this firmware to run on mine if possible???
???How do I install it if the device won't even turn on???
The device can connect to PC as RKusb or RK292x, so I need to ether install it direct from computer or figure how to get it on. It has only three buttons on it power, vol. up and vol. down and a reset hole on the back. It does come with a keyboard but unsure if it works on tablet as it is.
Will Sell Tablet the 1st of August as bricked, 30 bucks as is
tjeerdo112 said:
The easiest way to root: find the update.zip for your device online. Download it and place it into the root of your phone, shut down your phone and reboot into recovery mode (volume up+home+power) then navigate with you volume buttons to apply update from sdcard (select with home). Select update.zip and wait, then reboot and BOOOM your rooted
If this helped you please dont hestitate to leave a thanks
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
It has no home button on it. only power volume and up and no update file for it as well.
Thanx for trying
Bumpers
If you happen to be following I found the firmware, 2 weeks of search and here is the link:
http://lyxfsz.com/en/downs.htm
Now can someone help me put it into my tablet.
My tablet is a black screen and will not power on. It will connect to my PC through the USB and comes up as Rockusb Device.
EASY to follow steps thank you.
PLEASE HELP
I will be your BFF if you help me out,I am dieing with out tablet.
did you ever get this sorted?
CMP748 firmware
happy420 said:
PLEASE HELP
I will be your BFF if you help me out,I am dieing with out tablet.
Click to expand...
Click to collapse
I could help you flash it, just please give me that firmware file for CMP748 which you find it.
Thanks!

[Q] Is my SGPT121 salvageable?

I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
SirStorm said:
I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
Click to expand...
Click to collapse
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
stifilz said:
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
Click to expand...
Click to collapse
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
SirStorm said:
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Adb should still be available in recovery wether usb debugging is on or not. Is it asking for a driver at all?
If you had the latest update installed then. You wont be able to install anything and it will need to go to sony.
SirStorm said:
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Check your device manager to see if the tablet driver is properly installed, if not, install it. This might help.
Sent from my GT-I9505 using xda app-developers app
Thanks for the help! I called Sony today, they said since the computer doesn't recognize the device and it will only go into recovery sometimes the pad needs service. (I know OF COURSE) But is does stand to reason since I have plugged into multiple PCs and no recognition. They are sending a box for me. I just hope my 32Gb version doesn't tank also.

Categories

Resources