Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Josefon said:
Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Click to expand...
Click to collapse
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
yellowumbrella said:
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
Click to expand...
Click to collapse
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Josefon said:
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Click to expand...
Click to collapse
As long as your tablet is out of APX, you should be able to just go ahead and follow this
http://forum.xda-developers.com/showthread.php?t=1864774
to get updated to the latest CM10
Related
Hi all! My friend´ve a Hero and after radio update the phohe has bricked. See this video:
http://www.youtube.com/watch?v=R5ihQU7DoDU
How to fix this?
Thanks.
Nobody know?
It´s such!
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Lord Lucan said:
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Click to expand...
Click to collapse
Radio: 6.35.09.26
ROM: Modaco-3.1
Recovery: RAV-hero-v1.5.3.1
Thanks for u support.
Have you tried turning it on while the charger is plugged in?
Lennyuk said:
Have you tried turning it on while the charger is plugged in?
Click to expand...
Click to collapse
Yeah, but charger don´t works on flash image and the battery is fully!
:S
Thanks.
And you have tried to go back into the recovery?
Lennyuk said:
And you have tried to go back into the recovery?
Click to expand...
Click to collapse
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
fabioccoelho said:
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
Click to expand...
Click to collapse
Try turning it on with the power button and the second you see any life hold down home.
I don't think this will work but it might be worth a try.
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
bonesy said:
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
Click to expand...
Click to collapse
Yeah, adb debug is check! But, i can´t access fastboot or recovery mode.
Thanks.
copy ra_hero recovery onto the root of your sdcard
then...
adb shell flash_image recovery recovery-RA-hero-v1.5.3.1.img
oradb shell flash_image recovery-RA-hero-v1.5.3.1.img
I cant remember which soryy, but one should work!
device not found
Hi! I am in the same s..t so I tried it all
some people managed to do this and get it working again :
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image! Yay!
MINE IS EXACTLY LIKE THE YOUTUBE VIDEO and it didn't!
Any other sugestions?
[email protected]
yea i think u have different problems,his goes to recovery.yours is doing the same as my Sapphire which is being collected by HTC tomorrow for repair pressing HOME+POWER will not get to fastboot! it will take you too recovery
and finaly the FIX
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Thanks for all answers. But only kind to solved this is with JTAG to Motherboard.
Thanks!
same issue here
Hi everyone
I've got the same problem showed in that video. Could you guys help me out? Is JTAG the only way? My mobile simply can't be recognize on Windows and ADB just doesn't list the device...
I've tried every key button combination, but all I got is that Out of the Box image (seems like it's the background of the recovery mode or smthg)
I got my phone charged from USB (from my notebook) but windows doesn't recognize it, even if I dloaded the drivers for it.
Any suggestion would be of great help
Thx a bunch
TAG
same issu here
MESCU said:
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Click to expand...
Click to collapse
Hi MESCU
Could you tell us a little bit more about what happened to your phone and what procedure the guy who fixed your phone did? thx for your help
TAG
phone and the box image
sorry if this is a bit out of place but i had something similiar but not as major...i just tried flashing my radio update today and it went well till it said reboot press home and power...i pressed that then it got stuck in phone and box picture for a good 5 minutes..i didnt know how long to late because im new to this..thankfully when i pressed home and power and it came back to the recovery and i just reboot and it works fine now!
Can anyone please help me with this? I have HTC Sensation with CM10. This tablet without root is uselles...
Anyone?
How did you put CM10 on it without root?
post-mortem said:
How did you put CM10 on it without root?
Click to expand...
Click to collapse
Read carefully what I wrote.
I have HTC Sensation with cm10. Its my dailly driver.
Goclever R75 i bought becouse it was cheap But what is android without root? And I cant get any information about that on this tablet...
No one know how to do that?
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
is it function? no problems?
Yes this works. Ive done this 2 times
Hi! Can you please tell me how to instal drivers from that package?
If u dont know how 2 do that... Please do not root your device!
devgron said:
If u dont know how 2 do that... Please do not root your device!
Click to expand...
Click to collapse
Hi again, thanks for your concern but it's not my first time when a try to root a device. I have a sony x8 rooted and a rom on it but never needed to instal something like that to root so can you please tell me how do i get over that spep? Sorry for my english.
devgron said:
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
Click to expand...
Click to collapse
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Kurjak78 said:
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Click to expand...
Click to collapse
Hi, I have same problem. Did you get fix for this??
zefer79 said:
Hi, I have same problem. Did you get fix for this??
Click to expand...
Click to collapse
No. Fortunately I was able to exchange it for the new one.
Kurjak78 said:
No. Fortunately I was able to exchange it for the new one.
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
orlairet conde
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
bugxyz said:
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
Click to expand...
Click to collapse
Kurjak78 said:
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
Click to expand...
Click to collapse
Hello!
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
WIFI not working and sensor keys bad workimg
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
xxxx
I hope it helps you.
Bye.
Click to expand...
Click to collapse
:/ after install to "bricked" goclever tab r75 android from link xxx provided by bugxyz android run. .. wifi not working and senzor keys are shifted please help me :/ sorry for my bad english i am czech and the screen is shifted
Hello.
If you have those problems it means that you have an goclever tab 7500 and not an R 75. I saw that some contries 7500 was sold as R 75.
I had the same problem as you when I have flashed my R 75 with 7500 firmware.
I will upload also the 7500's firmware and provide the link when it is uploaded.
I hope this will help you.
Ps: 7500 firmware is unrooted.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
Sent from my LG-P990 using Tapatalk
thx
Thank you very much, it helped. how should I do to make me root it got broken again
declara kvide
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
I hope it helps you.
Bye.
Click to expand...
Click to collapse
Bugxyz, you are a savior. Thank you.
I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
SirStorm said:
I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
Click to expand...
Click to collapse
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
stifilz said:
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
Click to expand...
Click to collapse
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
SirStorm said:
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Adb should still be available in recovery wether usb debugging is on or not. Is it asking for a driver at all?
If you had the latest update installed then. You wont be able to install anything and it will need to go to sony.
SirStorm said:
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Check your device manager to see if the tablet driver is properly installed, if not, install it. This might help.
Sent from my GT-I9505 using xda app-developers app
Thanks for the help! I called Sony today, they said since the computer doesn't recognize the device and it will only go into recovery sometimes the pad needs service. (I know OF COURSE) But is does stand to reason since I have plugged into multiple PCs and no recognition. They are sending a box for me. I just hope my 32Gb version doesn't tank also.
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
VoodooBiscuit said:
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
Click to expand...
Click to collapse
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
stympy said:
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
Click to expand...
Click to collapse
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
katsanos said:
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
Click to expand...
Click to collapse
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
stympy said:
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
Click to expand...
Click to collapse
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
satanduck said:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
Click to expand...
Click to collapse
katsanos said:
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
stympy said:
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
Click to expand...
Click to collapse
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
katsanos said:
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
Click to expand...
Click to collapse
do you have time for a team viewer sesion ?
Yes, of course . I am sending you a pm
Sent from my SM-T310 using Tapatalk
stympy said:
do you have time for a team viewer sesion ?
Click to expand...
Click to collapse
thanks for everything ! :good::good:
everything seems allright now
katsanos said:
thanks for everything ! :good::good:
everything seems allright now
Click to expand...
Click to collapse
You are wellcome!
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse