Related
Hi,
This update.zip is for Cm7 users having the problem, that if the screen goes off the phone reboots/goes off. Jerpelea has included a baseband folder into his updates and mentioned that the rom only works with this modded baseband correct, but if you use this fix please also flash the following ftf bundle with flashtool.
Requirements:
Cm7 by Jerpelea
Files:
435FW+bb52_from_bb-collection.ftf
Cm7_when_screen_off_fix.zip
Installation:
Flash the ftf bundle with flashtool
boot into recovery and flash the when_screen_off_fix.zip
boot into rom
Info:
Before saying: "After flashing this my phone only WLODs or FC's", please try a clean install first!:
Flash the ftf bundle using flashtool
Go to recovery
Flash the newest Cm7 rom
Flash right after the rom the fix
reboot
here you are
I AM NOT RESPONSABLE IF YOU BREAK YOUR DEVICE OR DROP YOUR COFEE !
Cheers,
L
good idea...
yea, i wrote a long reply in my other thread. With this solution i haven't to make always a new update.
@9Lucas5
Hey buddy, good idea on the thread, it will be easier to follow as this does not confuse the busybox issue for wifi fix.
Anyway, how about a instruction of use for the op also clearing up questions like do we have to flash them everytime a new cm7 release is out, what sequence do we flash these ie before/after flashing the rom.
Lastly Doomlord has been trying for weeks to find the cause of this issue, at my request, J & Z have given there thoughts, we all appreciate everybodies help with the fixes and input, i read your post and explaination and respect what give to our forum, i think doomlord was confused about the busybox issue and probally thought you knew more about the system bin/xbin, we will find a solution working together, thanks for all your hardwork.
The problem just started for me, I think it is because my batery went bellow 20% is this fix also for that or only for when it happens always ?
depulle87 said:
The problem just started for me, I think it is because my batery went bellow 20% is this fix also for that or only for when it happens always ?
Click to expand...
Click to collapse
I only know that my fix fixes the reboots appearing right after turning off the screen. I don't think that it fixes also this, but try it.
tried it and you are right it didn't fix it, I'm wrong here cause it just happened when screen on so it is the low bat issue not the screen off issue.
however your method did not break anything and for the first time my phone said it was booting into custom kernel
does this fix random wlod and reboots ?
ok, I'll repeat again. I don't know what this maybe is fixing too, but i think it's nothing, cause there aren't many files in it. There are only the miniloader and the splboot.ko in the update.zip. I only know and say, that it fixes the screen off = reboot problem. Other things, please simply try. If it fixes anything else you can post it.
Shouldn't be getting WLOD on This version!
I take it your using the loader that came with the main update.zip?
superleeds27 said:
Shouldn't be getting WLOD on This version!
I take it your using the loader that came with the main update.zip?
Click to expand...
Click to collapse
I'm using the loader came with z's incall volume fix kernel
Battery below 25% reboot.
depulle87 said:
The problem just started for me, I think it is because my batery went bellow 20% is this fix also for that or only for when it happens always ?
Click to expand...
Click to collapse
The below 25% battery issues got fixed for me when i reset the battery stats on the xrecovery. this got really fixed just doing that right after fully charging the battery. I think this most likely is the battery issue, because it one of the only variables between phones. The battery stats reset should always be done when the battery is totally full or very near that.
this patch saved my fathers phone - and so saved my evening!
thanks a lot! there actually ARE people out there with that screen off reboot issue.
i wonder why the xperia community seems to have less team spirit than i am used to (from other phone communities i participated in) - i would at least expect that this issue is mentioned and this thread linked on the first post of cm7 - i also dont understand, why various hardware issues are solved on various roms, but not overall...
like i said - this community is "different" to me anyways, thanks for solving this issue, giving my dad latest stable cm7 (including my personal work and taking care of this device anyways
regards
Download links no longer working so thread closed...
So my touchscreen didnt want to work anymore yesterday.
I restarted my phone several times and it didnt work.
I then went into xrecovery and clicked 'fix permissions'
Then more stuff didnt want to work anymore
I reinstalled the update.zip file, did a factory reset etc
And now my phone is stuck at the boot with 'Sony Ericsson'
I had minicm6 v6 on my phone (u20i)
I tried reinstalling a backed up zip, but still nothing.
What now?
If you made a backup you should try to restore that.
Sent from my Xploded Dinc2
Edit: Got my phone working, but now when I download something from the market, the phone restarts when it installs ?
Have you figured out the reason why it keeps restarting? If not I would try to reflash the rom.
Keep us updated.
Sent from my Xploded Dinc2
Ok I did another factory reset and cleared dalvik cache.
Everything is working good now
Thanks
No problem that's is what this community is here for
Sent from my Xploded Dinc2
Sweet
Soooo now that everything is working fine again, would anyone like to recommend me a new ROM to install? Some CM7 mod/rom maybe?
Which ones are the best?
(I know there is a list with all of the roms available for my phone, just thought I'd ask)
Im not sure which roms are available for your phone but cm7 is always a good choice.
Sent from my Xploded Dinc2 using xda premium
I ended up in installing CyanoCream Sandwich v2.0
Looking good so far
demozzracy said:
Sweet
Soooo now that everything is working fine again, would anyone like to recommend me a new ROM to install? Some CM7 mod/rom maybe?
Which ones are the best?
(I know there is a list with all of the roms available for my phone, just thought I'd ask)
Click to expand...
Click to collapse
Check this one Its the best one and quite fast then other ROMS
http://forum.xda-developers.com/showthread.php?t=1415026
I had Stornmix V2 installed for a couple of weeks and it's fast and stable...I really like it.
The only problem I noticed is that when I'm using the video camera, the phone just freezes and I need to remove the battery to make it work again.
The problem with that one is the requirements:
Unlocked bootloader
Latest version of the nAa kernel
I dont know if I have those things on my phone.
And Im not too sure on how to put it on, if i have too
Update:
CyanoCream Sandwich is a bit slow to be honest. I think I will be looking for a new one to install
You will learn little by little by searching through the forums. Unlocking takes some time and some patience.
If you only follow the instructions step by step then you will get an unlocked bootloader and you can install any kernel. dont worry, you will get it soon.
my regards and good luck for that.
Hey guys,
here is what is going on with my German Vodafone I9100
After using Sensation Rom for a few months, I finally decided to make the transition to Android 4.
The first rom I tried, was the Simplistic ICS by LegendK95
Installing from CWM worked like a charm, booting worked like a charm, but whatever I tried to do, the phone freezed in homescreen randomly after 5-30 seconds. Only a restart bring it back to work, only to make it freeze again after the mentionend time span.
Whatever I did (waiting in home screen, pulling down the statusbar, scrolling in app drawer) the phone always freezes.
After dozen of restarts, I installed the rom again, the problem stayed.
Then I decided to go to stock 4.0.3 (LP6). Installation via Odin worked like a charm. Booting worked like a charm, but the homescreen-freeze-problem got even worse.
I also tried to reinstall the stock LP6, but the phone now even froze in CWM mode, while data reset AND WHILE INSTALLING THE FW.
Now I got a soft brick in my hands.
So, I installed stock 2.3.3. via Odin. The phone now worked flawless again. No freezes, no no nothing. Just a working phone.
My final try was to install the latest CM9 build.
Guess what happend?
The legendary homescreen freeze. That nobody else appear to have. YAY
So, somehow my phone seems to be allergic to Android 4.
Can somebody please help me?
Regards
PS: Yes, I followed the instructions every firmware provided.
Honestly you want an honest answer. Stay clear of ICS leaks and yes that means even cm9. Reason being. Because of what they are. Leaks and nothing official. Not saying that they are not good but if you look at the original android development can you see any actual ICS roms? No. Why you asking? Because no kernel sources have been released and nothing is far from stable yet. Even cm9 builds codeworkx has on the thread title experimental. So my advice. Flash a Gingerbread custom rom slap on it the ICS by vertumus and your good to go till the official stuff get released.
Maybe before flashing ICS you should fully wipe your device to get rid of all previous ROM data from Gingerbread as they,I imagine,wont be very compatable.
Boot to recovery and go to "mounts and storage" and format System/Data/cache and then factory reset.Then flash the Rom via recovery(install zip).If its an Odin flash then reboot and flash via Odin.
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Klammeraffe said:
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Click to expand...
Click to collapse
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Suarez7 said:
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, but if you're not that big into watching/recording videos on your SGS2, it's pretty freaking stable.
Installing the latest experimental build of CM9 is probably the best thing I've done to my SGS2 as of late. It's just so... Nice.
I cannot get rid of that problem.
I really need help on this.
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Klammeraffe said:
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Click to expand...
Click to collapse
Maybe the problem is the stock firmware you first flash.I searched for it but cant find it,is it carrier branded?..BUG sounds like it to me.Maybe you should fully wipe your phone (format System/Cache/Data) and first flash something like XWKL1 and then the ICS ROM.If the ICS ROM you are going to flash has a multi CSC package in it then it wont matter what F/W you flash first.
hello cooza,
i had to go back to stock 2.3.3 because my phone was a brick after flashing any ics rom.
i tried to flash simplistic ics and cm9 via cwm, i dont know if those contain multi_csc.
however, the leaked stock roms, lp2 and lp6 both contain multi_csc that i flashed via odin.
here are all the steps i tried:
fail 1: flashing from sensation rom 3 (2.3.6) to simplistic ics
fail 2: flashing from 2.3.3 to cm9/simplistic ics
fail 3: flashing from bricked ics to stock lp6
fail 4: flashing from 2.3.3. to 2.3.5. (latest official release via kies) to cm9/simplistic ics/stock lp6
fail 5: flashing from 2.3.3 to leaked stock lp6 inluding the pit-file provided
nevertheless, flashing from 2.3.5 to simplistic ics worked until restarting the phone. however, cwm was not working correctly then. so, surely i could have tried to let the phone on for forever, but as soon as i would want to flash a new firmware, i would have got a brick left, because cwm would crash during installation of the new one.
there must be some help out there
thanx for trying cooza. much appreciated.
You might have a damaged bootloader.Although its not needed you could try a JTag.A JTag is used to bring a hard bricked phone back to life.You dont have a hard bricked phone but what it also does is repairs any damage that the bootloader may have.Costs about 25 to 30 euros.As a last resort you could give it a go if your phone is going to give you constant reboot problems and not let you flash firmwares.It should also repair any repartition faults because it completely wipes the bootloader before repairing it.The phone will come back like the first day you got it.check the link below out and use it to find one close to you if you choose to do one.I had an i9000 done last September here in Spain and it came back perfect from a hard brick soo I know it works.I used the link below.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
Seems like the very last option to me
Would a broken bootloader allow me to run 2.3.X flawless?
Question does Samsung stock firmware work .
As it seems all your problems are from using a buggy unreleased test rom not from using Samsung released firmware .
I would if it was my problem .
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card wiping everything on the phone .
Remove battery
Boot to download mode
Open Odin
Install correct Samsung stock firmware for your phone model .
Test phone works .
jje
hi JJ,
thanks for your post.
as i said, the phone is working fine on stock android 2.3.X as well as custom firmwares using 2.3.X.
However, all 4.0.X firmwares I tested, showed the same behaviour: crashing my phone in homescreen (or anywhere else after booting) AND in cwm after 10 to 30 seconds.
only simplistic ics custom rom worked fine until first reboot. then it crashed as well. everytime.
I tested 2 stock firmwares of samsung and 2 custom roms.
I also tested flashing 4.0.3 (CM9) on a friends SGS2 using the same procedure I used on my phone. It worked on first try and he`s now a happy android 4 user.
right now i`m running on CM7 but i wanna uprage to android 4.
edit:
up to this date there is no official released 4.0.3 rom for the sgs2 but how can it be that I have the only phone showing such a behaviour while everyone else has a 99% stable fw for the same phone using the same rom?
Mate,at least it works,thats the important thing.I can understand that its frustrating when the only Firmware/customROM you want doesnt work in your phone and only your phone but we are talking about BETA version ROMs.If there is something for some reason blocking the ICS ROM then it is possible that the JTag will clear it up as it wipes and repears the bootloader as I mentioned so any corrupt data will dissappear.Ive had a bricked phone done and it still works perfectly today but never a phone in your situation.Its possible but never having done so I cant guarantee it.If you want give it a go.You got nothing to loose except 20 or 30 bucks for your efforts.
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
If you take the time and read the various ICS posts one inescapable fact will arise .
ICS suffers from many varied problems with no two users reporting identical problems .
That is compounded by two factors one the boot loader and two as a beta test rom for some strange reason those with very little knowledge rush to install it .
But hey save money on the Samsung testing department just leak your Alphas and Betas .
For me i will play with a test rom for an hour or two but thats it i require a stable rom for daily use . It will need vast improvement for me to consider the final release of ICS for daily use .
jje
spytrek said:
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
Click to expand...
Click to collapse
GSMArena say that Samsung are launching ICS for the S2 in march
http://www.gsmarena.com/samsung_galaxy_s_ii_and_galaxy_note_to_get_ics_in_march-news-3752.php
with this I imagine that stable ICS custom ROMs are just around the corner so if you can wait a few months more you will be able to flash a stable safe ROM without any problems.Until then the BETA versions that are out at the moment are going to cause these types of things.
I had these same isues with KP8 on my s2. I fixed them by flashing LP6 directly over kp8 without wiping anything. I think it may have something to do with the phone drivers you have installed on your pc. They may be damaged and be producing some kind of error on the flashing proccess. I recomend that you hard reset to 2.3.x and reinstall kies on your pc. That should reinstall phone drivers too. And make sure kies is NoT running while using odin. Kies doesent like odin
Sent from my GT-I9100 using Tapatalk
I have patience As long as I fallback to a functional rom everyting is cool. As for the alpha-beta testing, I have nothing against it and I didn't complain about it. Till March I hope the S3 is out so I can pass my S2 to my better half ...
Hello XDA! I have been a keen follower of this forum for long, but this is my first post, 'cause well... this is the first time I pretty stuck at something.
I have a Xperia Mini Pro (SK17i) and I have been using it for quite a while, around 2 years I presume. I have rooted and unlocked the bootloader by the end of the first year, and have been trying out several custom roms, until stopping at CM10.1 of LegacyXperia. (the amazing creation of Mike for our 2011-line of devices!) However, as of a month back, my touchscreen kinda broke - it wouldn't respond along with the capacitive buttons. I tried the methods mentioned in the general section, but no avail - it simply wouldn't work at all. There's a thin small strip that appears around the screen during pulling out the hardware keyboard, and I guess that somewhat suggests that the touchscreen is invalid by hardware means.
However, that's merely a background to the problem I'm facing. Recently, after the launch of CM11, I thought of giving it a swing, seeing how I have been an avid-fan of the pure look of CM. I tried flashing the kernel using flashtool and start the phone, but the only thing that takes place is just a vibration and a black screen. The screen remains black for like ever, until I pull out the battery. I tried flashing the kernel thrice, and the same problem persisted all through. I reverted back to the stock ICS then and it worked like a charm, and the same goes for FXP CM10 and the last CM10.1 I used... there's no problem whatsoever, save for the broken touchscreen.
Any suggestion one might give about my problem? Thanks a ton for reading out everything!
psychoticdemon said:
Hello XDA! I have been a keen follower of this forum for long, but this is my first post, 'cause well... this is the first time I pretty stuck at something.
I have a Xperia Mini Pro (SK17i) and I have been using it for quite a while, around 2 years I presume. I have rooted and unlocked the bootloader by the end of the first year, and have been trying out several custom roms, until stopping at CM10.1 of LegacyXperia. (the amazing creation of Mike for our 2011-line of devices!) However, as of a month back, my touchscreen kinda broke - it wouldn't respond along with the capacitive buttons. I tried the methods mentioned in the general section, but no avail - it simply wouldn't work at all. There's a thin small strip that appears around the screen during pulling out the hardware keyboard, and I guess that somewhat suggests that the touchscreen is invalid by hardware means.
However, that's merely a background to the problem I'm facing. Recently, after the launch of CM11, I thought of giving it a swing, seeing how I have been an avid-fan of the pure look of CM. I tried flashing the kernel using flashtool and start the phone, but the only thing that takes place is just a vibration and a black screen. The screen remains black for like ever, until I pull out the battery. I tried flashing the kernel thrice, and the same problem persisted all through. I reverted back to the stock ICS then and it worked like a charm, and the same goes for FXP CM10 and the last CM10.1 I used... there's no problem whatsoever, save for the broken touchscreen.
Any suggestion one might give about my problem? Thanks a ton for reading out everything!
Click to expand...
Click to collapse
The kernel is incompatible with your phone.
Care to explain a little more? I have flashed the kernel provided within the rom zip itself (as suggested time and time again), and I have double checked its for the correct device - i.e. mango.
psychoticdemon said:
Care to explain a little more? I have flashed the kernel provided within the rom zip itself (as suggested time and time again), and I have double checked its for the correct device - i.e. mango.
Click to expand...
Click to collapse
kernel is for mango??unofficial port right...can you provide the rom link once.....??
http://forum.xda-developers.com/showthread.php?t=2545367
This is the one - LegacyXperia CM11 by mikeioannina.
psychoticdemon said:
http://forum.xda-developers.com/showthread.php?t=2545367
This is the one - LegacyXperia CM11 by mikeioannina.
Click to expand...
Click to collapse
yeah i though so...was going through the post...did you try this..
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
As the rom requires a new partition table and maybe system and userdata is conflicting...
Dark Wraith said:
yeah i though so...was going through the post...did you try this..
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
As the rom requires a new partition table and maybe system and userdata is conflicting...
Click to expand...
Click to collapse
Thanks a lot for pointing it out, mate! Usually the roms I tried didn't require such a thing, but this might be it. I'll provide feedback if the steps works.
I tried the steps advised, but the problem seems to still persist to some extent. The capacitive lights are lit and the screen is lit as well (as could be understood from the viewing angles - it's brighter and powered up). Nothing seems to appear on the screen though - no boot logo or anything - and trying to enter recovery fails as well (through power + vol up shortcut). I have tried it twice already, kept the phone switched on for five minutes or so, but no avail. I had to pull battery out every time to shut down the device. Anyone have any other advice?
psychoticdemon said:
I tried the steps advised, but the problem seems to still persist to some extent. The capacitive lights are lit and the screen is lit as well (as could be understood from the viewing angles - it's brighter and powered up). Nothing seems to appear on the screen though - no boot logo or anything - and trying to enter recovery fails as well (through power + vol up shortcut). I have tried it twice already, kept the phone switched on for five minutes or so, but no avail. I had to pull battery out every time to shut down the device. Anyone have any other advice?
Click to expand...
Click to collapse
try this.....Have the stock ICS 4.1.B.0.587 full ftf flashed (doesn't matter if you have flashed it in the past or if you flash it before installing cm11.0, it will work both ways)
then see if device powers up...
once it does...go for the next steps........
Dark Wraith said:
try this.....Have the stock ICS 4.1.B.0.587 full ftf flashed (doesn't matter if you have flashed it in the past or if you flash it before installing cm11.0, it will work both ways)
then see if device powers up...
once it does...go for the next steps........
Click to expand...
Click to collapse
Thanks for the quick response, but I tried that too. Unfortunately, the problem still seems to persist.
psychoticdemon said:
Thanks for the quick response, but I tried that too. Unfortunately, the problem still seems to persist.
Click to expand...
Click to collapse
I wonder if its a hardware related issue...you said in your op that there is some problem with your screen and capacitive buttons...Got any friend with sk17i???? I had one before it was stolen......Every other rom apart from CM11 is working right..Is there any other Kitkat based ROM for sk17i..if its there you may try that out and see if you have the same problem...otherwise..wait for a kitkat based rom to come up and try before flashing this...Try one more time from scratch...flash stock ICS 4.1.B.0.587 full ftf..reboot....once its working...fastboot flash boot.img...then better to fastboot erase system and fastboot erase userdata and then before it boots enter recovery and wipe data cache everything...flash update.zip..wipe cache,data,dalvik cache again...and boot..if it doesnt boot up then there is no option but to wait..
Dark Wraith said:
I wonder if its a hardware related issue...you said in your op that there is some problem with your screen and capacitive buttons...Got any friend with sk17i???? I had one before it was stolen......Every other rom apart from CM11 is working right..Is there any other Kitkat based ROM for sk17i..if its there you may try that out and see if you have the same problem...otherwise..wait for a kitkat based rom to come up and try before flashing this...Try one more time from scratch...flash stock ICS 4.1.B.0.587 full ftf..reboot....once its working...fastboot flash boot.img...then better to fastboot erase system and fastboot erase userdata and then before it boots enter recovery and wipe data cache everything...flash update.zip..wipe cache,data,dalvik cache again...and boot..if it doesnt boot up then there is no option but to wait..
Click to expand...
Click to collapse
Exactly. That's the whole reason why I posed this thread - to know if it was a hardware related problem right off the bat, or there was really something that I was doing wrong. I'll rather leave this one open to see if anyone have any other opinion about the matter. I really want to see what Kitkat looks like seeing how it's not available for my current device. (Micromax A210)
Also, about trying out other 4.4 roms... I guess I can try that route. But seeing how this problem is induced by the kernel itself and every other rom out there is mainly based off the LX 3.4 kernel, I doubt if that will work. I'll try the option anyway and see if it works.
psychoticdemon said:
Exactly. That's the whole reason why I posed this thread - to know if it was a hardware related problem right off the bat, or there was really something that I was doing wrong. I'll rather leave this one open to see if anyone have any other opinion about the matter. I really want to see what Kitkat looks like seeing how it's not available for my current device. (Micromax A210)
Also, about trying out other 4.4 roms... I guess I can try that route. But seeing how this problem is induced by the kernel itself and every other rom out there is mainly based off the LX 3.4 kernel, I doubt if that will work. I'll try the option anyway and see if it works.
Click to expand...
Click to collapse
Yeah.....waiting for other roms wont work.....cz they are all based on 3.4.x kernel.......Umm can you check your baseband after flashing full ftf...baseband should be : 8x55A-AAABQOAZM-203028G-77..every other rom based on 3.4.x kernel works right???...btw if you want to see how it looks just download a kitkat launcher from playstore....
Yes, the baseband is .77 after flashing the ICS 4.1.0.B.587. I used 3.4.x kernel with CM10.1, but never really tried CM10.2 to that extent. Maybe I'll try downloading that and see if it works... or even the EOL CM10.1.
And sure, the launcher would give in the feel, but I want the full experience possible really.
I flashed Iced Bean 4.0 on my xperia sk17i and i think my touch screen died because of it, That rom has aroma installer and there was no my device on that list so i chose xperia pro. Installation was successful but touch screen didnt work. I reverted to stock using flashtools and it still doesnt work. Is there any way to fix this problem? i really need to try something so pleas suggest.
Just to be clear i'm not blaming on anybody, it is total my fault. I'm fully aware of risk installing custom roms so pleas help in any way you can
Thanks in advance
Have you tried to flashing a new kernel which was made for the phone? As far as I know drivers areusually stored within it in Linux / Unix systems so it might apply here for the touch screen as well.
i tried using command fastboot flash boot boot.img and generally did not work. I have unlocked bootloader. I had hard time finding guide to do that for my phone. I did revert to stock using flashtools and ftf file.
When you say fastboot didn't work, do you mean it could not connect to the phone? Where you in fastboot mode when you tried it?
I recently put the 4.4.4 AOPK rom (Link) on my phone and had trouble getting into fastboot to flash the required kernel, I think I solved that by using the flashtool.
If flashing the stock kernel doesn't fix the issue, perhaps using a custom one, which works with ICS, will help?
You can find some here: http://forum.xda-developers.com/showpost.php?p=47407355&postcount=3
-edit-
does this thread help you? [TUT] Fix broken touchscreen problem of xperia mini pro (SK17i,SK17a)
Fastboot worked fine, but any custom kernel after successful flashing didn’t work. I have installed managed to install xperialegacy cm11 it has custom kernel and it didnt fix touch screen. I will try the link you posted. On the side note i bought another sk17 today, yes i love this phone LOL xD
Yess, million times thank you . I made it using this tutorial
here is what you have to do for fix your Bricked touchscreen.
What you need for that is any custom rom with an aroma installer.
1. Flash suitable firmware with Flashtool ( i flashed .587 Because i used Zellycream rom V4 )
2. Then Install any ics Kernel that you like (I installed messa hybrid kernel v4.3 )
3: Then install Any rom that has Aroma installer in it and does support your device, via Cwm recovery (I installed Zellycream V4)
3. While installing the rom choose ST17i in Aroma instead of SK17i
4. Reboot after installation is completed.
5. Wait until phone is On homescree.Nopw touchscreen should work but h/w keyboard not
5. Reboot again into CWM install "keymap_for_pro_XXXX.zip
Link here For Keymap Mini pro
6. Reboot phone again.. Now keyboard and touchscreen should be working. Also options for h/w keyboard should appear now.
Good luck,
It did worked for me hopefully its also going to work for you.
Notice : At first your Touch might not responce how it was before, but give it a time it will work fine after some hours or day or it might never work like before.Mine touch screen worked normally after 8 hours of installing the rom with this method.
Click to expand...
Click to collapse
Now i have questions. Can for some reason touchscreen die again? and also which rom do you recommend for good battery and camera? i like stock but i find it tedious to root and remove all the unwanted apps only to free up a couple of MB and potential screw something
Update: I see that i need to flash a zip which fixes tochscreen. when installing new rom. Is this hardware or software problem?
It would surprise me if the screen died again from the same issue, as the harmful code should have been overwritten by the fix.
I am not a developer though, just a normal user with some basic linux knowledge.
I'd suggest trying out Real ICS. I think I ran it before I got my new phone (I just recently started using the Mini Pro again) and can't remember having any complaints back then.
Other than that you could just go through the rom list. There are some which claim to be focusing on performance, I haven't tried them myself though.
I currently use AOKP kitkat (with some modifications, see this post) but I cannot yet if I'll stick with it. Maybe gonna try out this one http://forum.xda-developers.com/showthread.php?t=2277199 next.
I think im going to stick to the stock for the now. Camera is the best there
I tried swapping motherboard from working sk17i to mine. MB is on stock 2.3 and bt is locked. To my surprises it did not work. Phone boot fine but touch screen does not work. I though this is a software problem, but i guess touch screen device has some controllers or something that were affected too.
Bucov said:
I tried swapping motherboard from working sk17i to mine. MB is on stock 2.3 and bt is locked. To my surprises it did not work. Phone boot fine but touch screen does not work. I though this is a software problem, but i guess touch screen device has some controllers or something that were affected too.
Click to expand...
Click to collapse
I'm confused. Didn't you solve the issue already?
If the damage is permanent, then maybe the touchscreen got damaged by using the wrong rom?
If you really want to have two working phones, you could get a replacent display from ebay. They start at around 30€ these days.