Related
Hi all. I have multiple problems in my x10i.it has 2.1 It was rooted and worked fine..few days ago I tried to wipe the phone and did the master reset via xrecovery ..after the restart it just hanged at the boot logo and xrecovery is not working from then....I wanted to update with SEUS via USB... but the phone is not connecting as well...What should I do? PLZ HELP ME GUYZ........
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
If SEUS/PCC doesn`t recognize your phone, remove them from PC and reinstall them.
You have an USB driver problem
ohm74 said:
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Click to expand...
Click to collapse
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Take the phone with the warranty for repairing.
mistake_man said:
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
Click to expand...
Click to collapse
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
iMatth3w said:
Take the phone with the warranty for repairing.
Click to expand...
Click to collapse
I bought it from ebay ...no warrenty... think thats stupid :/
rumanbsl said:
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Click to expand...
Click to collapse
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
rumanbsl said:
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
Click to expand...
Click to collapse
Well your usb is definitly working then as its glowin green?..
Are you sure you are doing it all right? It happened the same to me, and it ended I was pressing the wrong buttom (I knew which one was the correct one, but was blind cause I was scared that Ive broke it totally), a day later I noticed it and I was able to flash my phone.
However, read a guide and follow it step by step, reinstall everything and start from beginning maybe?
Or use the repair function with PC Companion
Hi! I had the same problem!
1. Search and download from this forum Flashtool 0.2.6
2. Install it.
3. Download from this forum one generic ROM (for exemple X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 )
4. Put the file in directory Flashtool/firmware
5. Launch X10flashtool.exe
6. DO NOT PUT THE USB CABLE IN THE PHONE
7.From option "flash select the desired ROM
8. Wait the program to begin(a picture will appear)
9. Pressing the back button, insert the usb cable.
10. Wait the flashing to begin and release the back button.
Follow instructions and WAIT around 5 minutes until flashing will complete
11. Send me two words if it helps you! Success!
ohm74 said:
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
Click to expand...
Click to collapse
I've did everything as u told.....no luck ! guess its the time to go to repair center...btw a guy from help center told me about software tampered,,!!out of luck
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
jakadewantara said:
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
Click to expand...
Click to collapse
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
try thread from DoomLORD : [DEV][How-To] Get Back to Stock Even With Broken / Damaged USB Port in http://forum.xda-developers.com/showthread.php?t=1054818
tarzerixx said:
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
Click to expand...
Click to collapse
Likely the USB port is dead and you have to send it in for repair.
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
pccobra said:
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
Click to expand...
Click to collapse
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
RedAxe said:
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
Click to expand...
Click to collapse
Hapenned the same to me...
I try to follow the steps, but i can't pass step 4 (it's unavaiable the "clean cache" bottom...)
Please help...
Restore original firmware with SEUS
RedAxe said:
...then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen...
Click to expand...
Click to collapse
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
do u have trick for my problem here forum.xda-developers.com/showthread.php?t=1388476
my x10 just vibrate once and stack on blank screen.
Sent from my X10i using Tapatalk
When I use SEUS It keep saying "You have the newest software available"
I tried the hard reset and all. The phone now just won't start at all
Hi,
i got the same problem what you describe ive stuck at the SE logo and cant get into recovery and i cant use flashtool. i tried to do what you say in the first post, but when i press the shell root button, it says "wait for device" then its not responding, and i cant moce on to the next step... what should i do now?
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
u totally saved me =D
X10 mini revived!
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
cruzstar said:
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
Click to expand...
Click to collapse
Update phone using SEUS....
Just google SUES
Definitely it will work....
Sent from my X10i using xda premium
yea i have use the SEUS..by pressing the back button..but it dont work..plz help me
Dear sir i already done that procedures but no use in seus shown u already updater software. plz help me
Cannot unbrick xperia mini E10i
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
Hello Guys,
I need your urgent help.
I cannot restore phone with SEUS or Companion. It says I already have the soft.
Getting fatal errors in Flashtool, I am stuck with SE logo and bootloader relocked.
I have the stock kernel but CM7 ROM.
Do you have any other ideas?
Tanks a lot!
deBelch said:
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
Click to expand...
Click to collapse
nope...didnt work...there is NO Install beneath...wonder why? is it i am using the latest SEUS?
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few seconds it boot automatically. and when i try to flash anything it boot automatically. please help me
---------- Post added at 12:21 AM ---------- Previous post was at 12:16 AM ----------
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few minutes it boot automatically. and when i try to flash anything it boot automatically. please help me
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol
Hello!
I read for hours now, bot no luck
I flashed my x10a with flashtool with generic rom.
After flash, as the flashtool says, just turned off and on the phone.
But nothing happened(green led blink one and do a sort vibration, thats all..)
no logo, no sound nothing happens.
I tried to reflash again, but windows says: Cannot recognize the device
In the control panel device manager show "unknown device".
Because of this , cannot reflash with the tool, because it's waiting for the recognized device too..
when i press the back and connect the cable, the green lighting for a minute , and turns of..
Yes, i have the correct drivers(as you can see i flashed before).
Help me guyz, please, if U can
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Try flashing back to stock non root. It may suck but at least you'll have a starting point. It'll read. Ust make sure you have newest flashtool. Just had the same problem with my x10. Its still havin troubles tho.
Stuck using xda app-developers app on a motorola backflip.
THeLogiC said:
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Click to expand...
Click to collapse
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
gyurc said:
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
Click to expand...
Click to collapse
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
luck_shawn said:
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
Click to expand...
Click to collapse
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
gyurc said:
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
Click to expand...
Click to collapse
Hey go back to stock 1st then try rooting later,
1) launch pc companion
2) select support zone
3) now select phone software update
4) then click on repair phone
Now software will download the stock ROM along with stock kernel..
When the software asks you to connect in flash mode, do the following
1) turn off the phone
2) Remove battery
3) Connect the USB cable to phone as well as to the laptop
4) Place the battery back while holding down the back button (3rd button from the left)
5) Green light should glow and the stock ROM and kernel should be flashed automatically..
When it's done you should have a stock unrooted X10, if you want then flash custom Rom after rooting it, be sure to unlock the boot loader if u want to flash custom kernel... Good luck
Sent from my X10S using xda app-developers app
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
gyurc said:
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
Click to expand...
Click to collapse
what do you mean by flashtool cant be done?
try this:
1) open flashtool
2) press the flash button and select any stock ftf firmware
3) now after pop up comes to connect phone in flashmode---- remove battery, connect the phone via usb, and lastly pressing back button insert battery simultaneously.
Now the flashing should start hopefully.
if this doesnt work please post the error you get in flashtool
i have the same problem with my phone only mine is x10i i reflashed 2.3.3. ftf ..like 7..8 times ..and still not working..btw smth the flashtool give me some error ..and other times works and says that the phone was flashed ..but phone still only 1 virbate and 1 blink green light now i am kinda bumped because i repair it once ...and now has the same problem
hello all!
thanks for all help.
What happened:
Hopefully i found the USB port have error. If is stand in half leg, not breathing for a minute and beg for christmas the connection made successfully, and first the SEUS , after the flashtool can recognize the phone well.
Now the phone working perfectly and going to my friend's service for fix the usb port problem.
While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I don´t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom