Related
Install this zip (via CMW ) if you want the CRT(gingerbread tv screen off animation)
http://www.mediafire.com/?doy0w1hjj9h92vm
original post :: http://forum.xda-developers.com/showthread.php?t=1118090
Thanks to jboogie3
Working and tested fine on 2.3.3 shadow 112 rel.
ok, one question...how to uninstall these type of files which are installed via custom recovery (..install zip from sd card)
rachit2588 said:
ok, one question...how to uninstall these type of files which are installed via custom recovery (..install zip from sd card)
Click to expand...
Click to collapse
very simple: restore your nandroid backup
(suppose you backed up prior installing the update.zip)
account1 said:
very simple: restore your nandroid backup
(suppose you backed up prior installing the update.zip)
Click to expand...
Click to collapse
ok i have my nandroid backup
works on froyo?
I believe no.
NITRO_100 said:
I believe no.
Click to expand...
Click to collapse
its not default this animation on 2.3?
It isn't default on this moto 2.3.3 rom.
rachit2588 said:
Install this zip (via CMW ) if you want the CRT(gingerbread tv screen off animation)
http://www.mediafire.com/?doy0w1hjj9h92vm
original post :: http://forum.xda-developers.com/showthread.php?t=1118090
Thanks to jboogie3
Working and tested fine on 2.3.3 shadow 112 rel.
Click to expand...
Click to collapse
OK.. what this CRT do actually?
farsight73 said:
OK.. what this CRT do actually?
Click to expand...
Click to collapse
It's an animation when you turn off the screen. It looks like whenever you turn off a CRT tv (the big ones, not sure if the newer flat screens do it too).
Was pleasantly surprised when I saw it after installing CM7
Ok, I'd done flashed JB3crt-animation.zip via recovery taken from above.
But nothing change or any special about it. Look the same to me?
Do you have a screen shot of it how it look like??
Edit: nevermind, got it working. thanks..
this doesn't seem to work for me either.
I just flashed it on clockwork mod and i tried it out and it isnt closing or showing the animation at all
johnoctubre said:
this doesn't seem to work for me either.
I just flashed it on clockwork mod and i tried it out and it isnt closing or showing the animation at all
Click to expand...
Click to collapse
enable it through cm options, set your brightness level not too low and you'll see it
It would be great for froyo xD
Thanks for sharing!
johnoctubre said:
this doesn't seem to work for me either.
I just flashed it on clockwork mod and i tried it out and it isnt closing or showing the animation at all
Click to expand...
Click to collapse
You need to have animations ON under the display settings otherwise you won't see it.
Can I use this also for the htc desire?
Does it work on CM10 ???
EzzyLupe said:
Does it work on CM10 ???
Click to expand...
Click to collapse
It will not work since stock 2.3 and Cm10 aka 4.1.2 is too much different. In 2ndboot quarx nightlies it enabled by default.
is it the same as 2.3 'S?
Hi ! I just created a mixed rom for the nexus one !
Base :
RCADSmixHD[gbSENSE2.1,3.0,720p,tb unlock] v1.6
[ROM] LeeDrOiD HD V3.3.3-Port-R5 |11th August| Ginger Sense 2.1 | FAST | STABLE | WWE
# Google Android 2.3.3
# HTC Sense 2.1
# Rootet
# Requires a SD-EXT Partition (at least 512 MB)
# Flashable via Armon Clockwork Mod Recovery 2.x.x
I used this Manual with some modifications. The Rom should fit now into the Nexus One Parition.
I see no chance to fix the boot / kernel issues until Desire GB Kernel Source Code is available ! So , PROJECT ON HOLD , SORRY...
waiting for the new link
Deep-Knight said:
Hi ! I just created a mixed rom for the nexus one !
Base :
RCADSmixHD[gbSENSE2.1,3.0,720p,tb unlock] v1.6
[ROM] LeeDrOiD HD V3.3.3-Port-R5 |11th August| Ginger Sense 2.1 | FAST | STABLE | WWE
I used this Manual with some modifications. The Rom should fit now into the Nexus One Parition.
If someone want to test, feel free and please report back feedback and adb log´s .
Maybe the Rom is booting and we can work together to get it done
Download here V0.0.1
Link is broken, i currently reupload the pack...could take about 40mins
Click to expand...
Click to collapse
Hi there,
First of all thanks a lot for your time (and patience) to cook a sense + 2.3.x based ROM for Nexus One. I will try your ROM later this week and provide feedback.
1 question though, have you added support for track-ball wake in your ROM?
chota_shivaji said:
Hi there,
First of all thanks a lot for your time (and patience) to cook a sense + 2.3.x based ROM for Nexus One. I will try your ROM later this week and provide feedback.
1 question though, have you added support for track-ball wake in your ROM?
Click to expand...
Click to collapse
No TB Wake up included. I currently not even tried to boot the rom... I currently dont have enough time to install & test. But i hope i´ll get some feedback and logs to get this done...
Link is up again! Look on first post...
Hi, i just tried to install the rom and it says: update script is missing ... so its not possible to install it. I am on CM7 latest nightly and amon ra recovery-wiped all and tried several times but no success
dulexetina said:
Hi, i just tried to install the rom and it says: update script is missing ... so its not possible to install it. I am on CM7 latest nightly and amon ra recovery-wiped all and tried several times but no success
Click to expand...
Click to collapse
Argh ! I see. META-INF\com\google\android\update-script is missing... I dit a misstake and named it updater-script :-(
Download and extract the attached ZIP file & integrated the files to the full-package (downloaded from first post). After that, try install.
UPDATED 11. SEP 2011 THIS FILES MUST BE INTEGRATED INTO FULL PACK, IT INCLUDES THE LATEST FIXES !
-> CURRENTLY NO FIX FILES AVAILABLE !
anyone try it yet?
Deep-Knight said:
Argh ! I see. META-INF\com\google\android\update-script is missing... I dit a misstake and named it updater-script :-(
Download and extract the attached ZIP file & integrated the files to the full-package (downloaded from first post). After that try install again.
Click to expand...
Click to collapse
Inserted this file to ur rom,but now it says eror line 6 or code 6 ,and install stops again- not sure anymore... Serbia has lost from France for a single poen so i am not quite ok
Please look into it so i we can test the rom. thanx
dulexetina said:
Inserted this file to ur rom,but now it says eror line 6 or code 6 ,and install stops again- not sure anymore... Serbia has lost from France for a single poen so i am not quite ok
Please look into it so i we can test the rom. thanx
Click to expand...
Click to collapse
Thanks for the Information. Ill look into the script.
Install Script is updated
PLEASE DO A NADROID BACKUP BEFORE TESTING.
AFTER THAT DO A FULL WIPE, CLEAR SD-EXT , FORMAT DATA... BEFORE TESTING THIS ROM !
Deep-Knight said:
Thanks for the Information. Ill look into the script.
Install Script is updated
PLEASE DO A NADROID BACKUP BEFORE TESTING.
AFTER THAT DO A FULL WIPE, CLEAR SD-EXT , FORMAT DATA... BEFORE TESTING THIS ROM !
Click to expand...
Click to collapse
First thread updated with some informations & instructions...
Does the ROM install now ????? There are some Downloads, any feedback please ???? Only together we can bring up a 2.3.3 Sense Rom !
Deep-Knight said:
First thread updated with some informations & instructions...
Does the ROM install now ????? There are some Downloads, any feedback please ???? Only together we can bring up a 2.3.3 Sense Rom !
Click to expand...
Click to collapse
OP, are you testing this rom in your own phone?
Menelkir said:
OP, are you testing this rom in your own phone?
Click to expand...
Click to collapse
Currently no, because i dont have time & have only one phone, i need for work. Ill try the rom on my weekend... I thought that there are some devolpers are here and interested in helping me...
The Rom was build with the two bases and should , after install is working, at least boot up with "some" issues. So we can get ADB Log´s to work with...
Deep-Knight said:
Currently no, because i dont have time & have only one phone, i need for work. Ill try the rom on my weekend... I thought that there are some devolpers are here and interested in helping me...
The Rom was build with the two bases and should , after install is working, at least boot up with "some" issues. So we can get ADB Log´s to work with...
Click to expand...
Click to collapse
Yeah but I think will be more difficult and hard to debug in that way.
I have the same situation as yours (only one phone and use it to work), so when I need to test it, I usually go for 10pm to install at least one time to check if everything is working.
Deep-Knight said:
First thread updated with some informations & instructions...
Does the ROM install now ????? There are some Downloads, any feedback please ???? Only together we can bring up a 2.3.3 Sense Rom !
Click to expand...
Click to collapse
The rom does not installs again- still using cm7 nightly,amon ra recovery,ext4 partition 768mb (0 swap size),radio 5.12 and latest hboot....
It says : E:eror in/sdcard/nexus-one.zip (Status 6)...
I have included latest fixes u provided in nexus one zip file,also full wipe (of course)...
Hope it can help
dulexetina said:
The rom does not installs again- still using cm7 nightly,amon ra recovery,ext4 partition 768mb (0 swap size),radio 5.12 and latest hboot....
It says : E:eror in/sdcard/nexus-one.zip (Status 6)...
I have included latest fixes u provided in nexus one zip file,also full wipe (of course)...
Hope it can help
Click to expand...
Click to collapse
The pack is not signed, have you disabled verification ?
I can't flash it with CWM 5.0.1.0
I have put the update script
sawewrong said:
I can't flash it with CWM 5.0.1.0
I have put the update script
Click to expand...
Click to collapse
Yes, you can only flash it with Amon Clockworkmod Recoveryx 2.x.x
Deep-Knight said:
The pack is not signed, have you disabled verification ?
Click to expand...
Click to collapse
Of course i did.
Please try to install it yourself and if u manage to do that write for others how to. I have no time for few days from now.
Thanx
Nice.. would you mind sharing some screens. And are there any issues with this ROM?
fabler said:
Nice.. would you mind sharing some screens. And are there any issues with this ROM?
Click to expand...
Click to collapse
Currently this is only a DEV Rom to get Logs & new Informations.
Right now i try to fix the install script, so that we can boot up this new ROM , after that we can se what is working & what needs to be fixed...
This is a completely 100% stock rom built from the P5220XXUAMJ8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5220 LTE, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download link:
100% stock
Rooted/Deodexed
Wow see your on a mission i know the community going to love this
Simply... THANKS!
Thanks a lot!
Do you know which version it is?
Thanks, friend & Greetz from Switzerland - Chris
Christoph21x said:
Thanks a lot!
Do you know which version it is?
Thanks, friend & Greetz from Switzerland - Chris
Click to expand...
Click to collapse
It's the stock P5220 4.2.2 rom, should work just fine for you
Dear Restl3ss
Could you pls. provide a mirror if possible? Mega is (currently?) not working with this file. (Screen remains endlessly stating "Starting")
And I use to have generally probs with Mega (also for pimpdroid )
Thanks for your work & Greetz - Chris
Christoph21x said:
Dear Restl3ss
Could you pls. provide a mirror if possible? Mega is (currently?) not working with this file. (Screen remains endlessly stating "Starting")
And I use to have generally probs with Mega (also for pimpdroid )
Thanks for your work & Greetz - Chris
Click to expand...
Click to collapse
Confirmed, download gets stuck on starting every time. Reuploading to mediafire, check back in a few
Christoph21x said:
Dear Restl3ss
Could you pls. provide a mirror if possible? Mega is (currently?) not working with this file. (Screen remains endlessly stating "Starting")
And I use to have generally probs with Mega (also for pimpdroid )
Thanks for your work & Greetz - Chris
Click to expand...
Click to collapse
reuploaded to mediafire link should work just fine now
just posted a deodexed / rooted build as well. No other changes have been made to this version
Restl3ss said:
just posted a deodexed / rooted build as well. No other changes have been made to this version
Click to expand...
Click to collapse
You're ... GREAT! Thanks a lot....
hello, I understand that I can install this rom to samsung tablet p5220. well, but I do not understand how I can root and install a custom recovery (otherwise how do I install the rom?).
tanks
supermurena said:
hello, I understand that I can install this rom to samsung tablet p5220. well, but I do not understand how I can root and install a custom recovery (otherwise how do I install the rom?).
tanks
Click to expand...
Click to collapse
If you have a custom recovery you can install this ROM to boot up stock / stock rooted. If you're just looking to root and don't want to replace your entire ROM I have a root method with guide posted here.
thanks for your answer. I'll try as soon as possible. bye
Hi
After install the deodexed Version i nave many force closes after boot. Its not possible to use the tablet. I flashed the rom with twrp. Whats wrong ?
Thanks
Ceejay72 said:
Hi
After install the deodexed Version i nave many force closes after boot. Its not possible to use the tablet. I flashed the rom with twrp. Whats wrong ?
Thanks
Click to expand...
Click to collapse
Interesting.. Can anyone else verify?
Disregard this message.
i can't install the rom
it gives an error after 2 sec of trying
i tried cwm and twrp
so any ideas ?
thank you
Does?
Does that rooted deoexed support mhl
Good morning. I followed the guide in an absolute way, but when I press the "Reboot" button restarts the tablet and is part of recovery. please help me
Pbt1994 said:
Good morning. I followed the guide in an absolute way, but when I press the "Reboot" button restarts the tablet and is part of recovery. please help me
Click to expand...
Click to collapse
Hi Pbt
Sad to hear this. Although it doesn't help you in THIS question, but I'd recommend to switch to Android 6.0.1 Mashmallow following this link: http://forum.xda-developers.com/galaxy-tab-3/development-10/rom-cyanogenmod-13-0-t3342017
Don't mess around anymore with Android 4.2.2...
If you need help, I follow (as you see) both threads.
Kind greetz from Switzerland - Chris
Christoph21x said:
Hi Pbt
Sad to hear this. Although it doesn't help you in THIS question, but I'd recommend to switch to Android 6.0.1 Mashmallow following this link: http://forum.xda-developers.com/galaxy-tab-3/development-10/rom-cyanogenmod-13-0-t3342017
Don't mess around anymore with Android 4.2.2...
If you need help, I follow (as you see) both threads.
Kind greetz from Switzerland - Chris
Click to expand...
Click to collapse
the problem is that I come from the CM 13. I preferred to return to rom stock because it seemed that the CM13 lag too. I think I will try to install the original firmware with Odin
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
justwondering said:
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
Click to expand...
Click to collapse
I very stupidly did not back up the rom , before i started playing with some of the settings....in real need of the rom if possible
justwondering said:
I very stupidly did not back up the rom , before i started playing with some of the settings....in real need of the rom if possible
Click to expand...
Click to collapse
Anyone pleassssssssssssssssssssssse
justwondering said:
Help please , i have checked on Needrom.com but i cannot see the rom for the V6.....will any other roms be suitable to use on the Jiake V6 ?
Click to expand...
Click to collapse
Here try using this ROM avaialble over "http://en.miui.com/thread-29808-1-1.html" see if this helps your out !
promo87 said:
Here try using this ROM avaialble over "http://en.miui.com/thread-29808-1-1.html" see if this helps your out !
Click to expand...
Click to collapse
Hi Thank you , i cannot see my device listed there can you tell me which version of the rom would be best please , i assume i install via CWM?
justwondering said:
Hi Thank you , i cannot see my device listed there can you tell me which version of the rom would be best please , i assume i install via CWM?
Click to expand...
Click to collapse
Hi,
I didn't find any ROM on the net for your phone, but this may be a good news for you! I found a device with same SoC as your device which has MIUI ROM. Here
Here is a guide on how to port it! Try it, it may work. I think it will as porting between 2 same MTK SoC's is really easy!
Cheers!
GeekyDroid said:
Hi,
I didn't find any ROM on the net for your phone, but this may be a good news for you! I found a device with same SoC as your device which has MIUI ROM. Here
Here is a guide on how to port it! Try it, it may work. I think it will as porting between 2 same MTK SoC's is really easy!
Cheers!
Click to expand...
Click to collapse
Thank you i shall take a look , thats brilliant
justwondering said:
Thank you i shall take a look , thats brilliant
Click to expand...
Click to collapse
I was just reading how to port :-
looks like i need the official rom of my phone.....but the big problem is my rom is not working !
http://reviewonanything.blogspot.co.uk/2014/05/ultimate-guide-for-dummies-port-miui.html
justwondering said:
I was just reading how to port :-
looks like i need the official rom of my phone.....but the big problem is my rom is not working !
http://reviewonanything.blogspot.co.uk/2014/05/ultimate-guide-for-dummies-port-miui.html
Click to expand...
Click to collapse
Well, what's wrong with your stock ROM? You can dump the system and/or make a nandroid backup in any custom recovery.
GeekyDroid said:
Well, what's wrong with your stock ROM? You can dump the system and/or make a nandroid backup in any custom recovery.
Click to expand...
Click to collapse
Basically , i was running the standard rom that came with my phone , i changed to NOVA launcher , but the phones normal launcher was still running the background.....so i rooted the phone and froze the original launcher that came with the phone as it was draining the battery.........anyway , i found the phone was running a bit slow , i had installed various apps etc..........Sooooo i thought , just reset the phone .....so because i did not unfreeze the original launcher , when it came to resetting , the phone now has no launcher due to me freezing it !
It looks as if most of the rom is still there as it does load up , it checks for sim cards etc but then stops at that point , even the phone signals come up.
So do you think it is worth using CWM to still back up the rom and use for porting to MIUI Jiake V8 version ?
If so , what command in CWM do i use to make a rom for using in porting .
Thank you for your help.
justwondering said:
Basically , i was running the standard rom that came with my phone , i changed to NOVA launcher , but the phones normal launcher was still running the background.....so i rooted the phone and froze the original launcher that came with the phone as it was draining the battery.........anyway , i found the phone was running a bit slow , i had installed various apps etc..........Sooooo i thought , just reset the phone .....so because i did not unfreeze the original launcher , when it came to resetting , the phone now has no launcher due to me freezing it !
It looks as if most of the rom is still there as it does load up , it checks for sim cards etc but then stops at that point , even the phone signals come up.
So do you think it is worth using CWM to still back up the rom and use for porting to MIUI Jiake V8 version ?
If so , what command in CWM do i use to make a rom for using in porting .
Thank you for your help.
Click to expand...
Click to collapse
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
GeekyDroid said:
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
Click to expand...
Click to collapse
Hi , i dont think i did , like i say , the phone does not fully boot , because i disabled the original launcher .
so basically , turn phone on , JIake screen , loads , then does not make it to the launcher , it just crashes , so i cannot go into settings etc etc...
justwondering said:
Hi , i dont think i did , like i say , the phone does not fully boot , because i disabled the original launcher .
so basically , turn phone on , JIake screen , loads , then does not make it to the launcher , it just crashes , so i cannot go into settings etc etc...
Click to expand...
Click to collapse
But I think you are able to swipe down the statusbar, right? If not, then make a CWM nandroid backup, convert it into a flashable ZIP and port MIUI.
GeekyDroid said:
But I think you are able to swipe down the statusbar, right? If not, then make a CWM nandroid backup, convert it into a flashable ZIP and port MIUI.
Click to expand...
Click to collapse
In the android recovery (3e) i have the option of Apply update from ADB
i have the following other options
reboot system now
apply update from adb
apply update from sdcard
apply update from cache
wipe data factory reset
wipe cache
backup user data
restore user data
Do i simply backup user data for my rom to port to MIUI ? or is there a simple way using the ADB update ?
With the ADB for the launcher update , how would i do that and how would the system pick up on my choice of launcher ? would i need to edit some lines of code to point towards my choice ?
Thank you for your help.
GeekyDroid said:
Have you enabled USB debugging on your phone? You can simply install apps through ADB, so you can install a launcher through ADB and/or push it to system!
Click to expand...
Click to collapse
Thank you for this , i had not tried to do this , yes i can get into my settings on my phone.... i wiped all the cache etc in the rocovery mode , then rebooted the phone , i then side swiped down to get into my settings.....i set up my google account...but when i load google playstore it just seems to hang...with the loading screen....i can even launch the browser from settings via the Apps setting menu....everything is working...but still no launcher....
i'm still a bit stuck on how to side load something like Nova launcher , so i can get my phone fully funcational again
I had hoped that with been able to set up my google account etc , the google store would of worked , then i could of just downloaded a launcher !
But hey i think i am getting somewhere today with this phone
Oooooooooh wow , thank you for the side swipe idea.....i cleared the data for the googlestore via the app settings , re-ticked the agree to google terms and conditions , then downloaded nova launcher !!!! looks as if things are working a bit better again
Brilliant i have even rebooted the phone and it loads straight to NOVA launcher
Can i still unfreeze the old launcher do you think ?
I would still like to convert to MIUI though
justwondering said:
Oooooooooh wow , thank you for the side swipe idea.....i cleared the data for the googlestore via the app settings , re-ticked the agree to google terms and conditions , then downloaded nova launcher !!!! looks as if things are working a bit better again
Brilliant i have even rebooted the phone and it loads straight to NOVA launcher
Can i still unfreeze the old launcher do you think ?
I would still like to convert to MIUI though
Click to expand...
Click to collapse
Nice to hear, that you got your phone working again!
Well, I would now copy the nova launcher to system/app and give rw-r-r permissions to it, so you won'z get problems again!
GeekyDroid said:
Nice to hear, that you got your phone working again!
Well, I would now copy the nova launcher to system/app and give rw-r-r permissions to it, so you won'z get problems again!
Click to expand...
Click to collapse
Brilliant , so if i do that , even if i do a full reset will it use nova launcher as my main launcher ?
Which option in my recovery options do i use to make a rom , so i can port to MIUI ?
Thank you every so much
justwondering said:
Brilliant , so if i do that , even if i do a full reset will it use nova launcher as my main launcher ?
Which option in my recovery options do i use to make a rom , so i can port to MIUI ?
Thank you every so much
Click to expand...
Click to collapse
Yes, you can. Well, If you don't have an actual stock ROM then it's not that easy to port it. As you have to make a nandroid backup, then convert it into flashable ZIP. But you actually need to set the right mount points for your device in the updater-script. And I don't know how to find that out. So I would be statisfied with stock ROM! :angel:
Just a quick rom to try out for oreo.
Stock Odin Firmware: https://www.androidfilehost.com/?fid=6006931924117909304
Modem and Bootloader: https://www.androidfilehost.com/?fid=6006931924117908540
ROM: https://www.androidfilehost.com/?fid=6006931924117908532
Rom is stock a little debloated and ramdisk is modded. Maybe a new kernel if there is anything I can do to it later on when samsung releases new kernel source.
How To change gps.conf File
How to set my gps.conf file on asia region!
There are 2 roms,
1. R16NW.C9000ZHU1CRG9.zip
2. C9000ZHU1CRG9.zip
Which one i have to download and install.
Thanks for the rom i will try it.
thehulk080 said:
How to set my gps.conf file on asia region!
There are 2 roms,
1. R16NW.C9000ZHU1CRG9.zip
2. C9000ZHU1CRG9.zip
Which one i have to download and install.
Thanks for the rom i will try it.
Click to expand...
Click to collapse
Link shows one rom only to download "R16NW.C9000ZHU1CRG9.zip"
Sent from my SM-C900F using Tapatalk
Can u make any rom for C900F Indian version??
Thanks!
travis82 said:
Just a quick rom to try out for oreo.
Stock Odin Firmware: https://www.androidfilehost.com/?fid=6006931924117909304
Modem and Bootloader: https://www.androidfilehost.com/?fid=6006931924117908540
ROM: https://www.androidfilehost.com/?fid=6006931924117908532
Rom is stock a little debloated and ramdisk is modded. Maybe a new kernel if there is anything I can do to it later on when samsung releases new kernel source.
Click to expand...
Click to collapse
Hi travis i have tried your rom installed properly but it will stuck on the main screen after boot.
2nd notification slider not working even touch is not working i think problem is with the launcher anyways plz try to fix it & i will test it again.
Thanks
Is the work still going on ?
are you still working on this rom @travis82 ? Is it compatible with c9000F ? Is it better than prison barebone ?
If not,can you tell me best kernel + custom/stock rom combination ?
antash.ahmed said:
Hi travis i have tried your rom installed properly but it will stuck on the main screen after boot.
2nd notification slider not working even touch is not working i think problem is with the launcher anyways plz try to fix it & i will test it again.
Thanks
Click to expand...
Click to collapse
yes it's stuck first time booting after flashed but if pressed the device 4 buttons simultaneously to force it to restart, it will be boot normally.
Sent from my SM-C9000 using Tapatalk
Copy/Paste not works in apps like facebook
Sent from my SM-C9000 using Tapatalk
C9000ZHU1CSC1 I have this firmware version SM-C9000 i dont want to made a room for this phone i just need to rood, i never did in this my lafe i try some guides but not helpmed me i dont have OEM Unlock section can u help me ?
Copying and pasting text does not work on this rom, how do i fix that?
otocu said:
C9000ZHU1CSC1 I have this firmware version SM-C9000 i dont want to made a room for this phone i just need to rood, i never did in this my lafe i try some guides but not helpmed me i dont have OEM Unlock section can u help me ?
Click to expand...
Click to collapse
In order to see the "oem unlock" function, you need to flash nougat rom then enable it from there, it was removed on oreo.