Hello, I've had huge issues trying to unbrick my tab.
When attempting a factory reset nothing happens. I suspect this is where the storage was encrypted on the last working rom... I'm struggling to get the tab to boot up now.
Can get into recovery but again, cannot do a full wipe as the storage will not mount.
Have tried reflashing back to stock via Odin and I'm getting the following in log.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XWALG7_N8000BTUALG6_N8000XXLGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Running out of things to try now. Anyone have any ideas of what to try next?
Let me know if you require any more information too please. Really tearing my hair out over this one, never had issues like this before that I couldn't resolve myself. Feels a little shameful having to ask tbh
What cwm do you use? And what ROM did you use? Did you just install it or are you using the ROM for a while?
Maybe, and i hope...this guide will help you any further, good luck
http://forum.xda-developers.com/showthread.php?t=1133590
Related
Hello, I need help with my Samsung Galaxy SGH-727 skyrocket..Got stuck on the Odin mode...
That happen when i try to root my phone
I got this message:
Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again.
How can i get out of the Odin Mode?
Kies failed to connect and Odin Failed to flash....
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I727UCLF6_I727ATTLF6_I727UCLF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Please help ..Thanks in advance....
THIS ISNT THE SECTION FOR YOUR PHONE
Sent from Team Pirate! Using Tapatalk 2
Slooooow rockets, activate!
No help for people too stupid to figure out what forum they belong in.
Easy Miami... Closed
Hi There,
After using temasek's stock android rom a while without any problem my galaxy s3 won't turn on anymore. About a month ago my S3 suddenly shutted down and now I get a bootloop where I only see the samsung logo reappearing every 5 seconds. I can't go into recovery mode, only into download mode. So my phone is soft bricked i supposed.
I tried almost everything, I searched for weeks for a sollution on XDA and I didn't found anything that could help me. So now i'm asking you guys because i'm a little bit desperate and i'm using my old nokia 3310 for a couple of weeks now.
I tried to reinstall my original firmware which I downloaded on sammobile with odin but there is always some kind of error.
I tried several versions of odin (new one's, olders one's) And still no progress.
Here's the log from odin v 1.85 :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_PHN_I9300XXALE8_I9300PHNALE4_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I just checked off the box "PDA" and "AUTO REBOOT" and "F. RESET TIME" . When I use a pit file this is the log of odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_PHN_I9300XXALE8_I9300PHNALE4_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I'm sure that i used the right firmware, I've tried different pc's, i've also tried differend firmwares... Always a damn error in odin...
Can anyone help me?
ID:0/006> There is no PIT partition.
If you use a PIT file it has to be the right PIT file .
jje
JJEgan said:
ID:0/006> There is no PIT partition.
If you use a PIT file it has to be the right PIT file .
jje
Click to expand...
Click to collapse
I used the GT-I9300_mx_20120329.pit file which was suggested in this topic: http://forum.xda-developers.com/showthread.php?t=1894548&highlight=stock+firmwares
Weird. Sounds like SDS. What kernel were you using aling with Temasek s ROM?? And which version??
dhirend_6d said:
Weird. Sounds like SDS. What kernel were you using aling with Temasek s ROM?? And which version??
Click to expand...
Click to collapse
Version 77 and his kernel!
I have an 10.1v, which is unlocked and rooted and has been running on isis rom. I haven´t used it for about one year and now wanted to flash the cyanogenmod. Because I haven´t used it for so long, I started with a factory whipe.
But since then my 10.1v is stuck in a bootloop. I still can get into download mode so I tried to flash the stockrom via odin... Odin is checking the files and this is what happens:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_P7100BUKC8.tar.md5 is valid.
<OSM> PDA_SIGNED_HRI83_BUKDF.tar.md5 is valid.
<OSM> MODEM_HRI83_BUKDF_REV_03.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
so nothing acutally is flashed and I don´t know why... anybody who can help me? Thank you!
Hey guys, I have this Verizon Fascinate that I used to use when I was wayyy younger. Back then I was using it, deleted a wrong folder when I was browsing through the My Files app, and it hasn't turned on since. If I try to power it on, all I get is a white screen that continues to flash. I've looked at all of the other threads about resetting the Fascinate to stock with Odin and Heimdall, and I've tried the steps given there, but it hasn't helped. I can still set it to download mode, and I can still charge it with the charging battery screen, but no recovery/boot up what so ever. I tried flashing multiple stock firmwares in Odin with the stock pit file or the atlas pit file, but this is all I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
The phone wasn't rooted before and didn't have any sort of custom rom on it. Any help would be greatly appreciated by those still browsing these forums.
MexicanBRUHH said:
Hey guys, I have this Verizon Fascinate that I used to use when I was wayyy younger. Back then I was using it, deleted a wrong folder when I was browsing through the My Files app, and it hasn't turned on since. If I try to power it on, all I get is a white screen that continues to flash. I've looked at all of the other threads about resetting the Fascinate to stock with Odin and Heimdall, and I've tried the steps given there, but it hasn't helped. I can still set it to download mode, and I can still charge it with the charging battery screen, but no recovery/boot up what so ever. I tried flashing multiple stock firmwares in Odin with the stock pit file or the atlas pit file, but this is all I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
The phone wasn't rooted before and didn't have any sort of custom rom on it. Any help would be greatly appreciated by those still browsing these forums.
Click to expand...
Click to collapse
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
First of all,I did everything step by step to install a custom rom to my Samsung Fascinate but odin says "Setup connection....
"All threads complete (success 0/failed 1)
Then,after my phone got bricked,I tried installing a stock rom, but the same thing happened :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE HELP NEEDED I AM REALLY TENSED :crying:
Did you ever find a solution to your issue? I am having the same issue but I paid OneClickRoot to Root my device for me and they screwed it up and are pretty much throwing their hands up about it. I am still giving them the chance to make it right but my patience are wearing real thin.
To save you as long as it is not hard bricked, follow these steps.
Get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
And please make sure you got the drivers and that a COM port does show up in odin.