i had ICS installed in my Galaxy S2 by myself using Odin.
I tried to install Jelly bean , but failed and now its in Downloading mode. i dont know what to do know. i tired to install Ginger bread still stuck. i even dont know which stock rom i need. and where i can download it from ??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWKJ3_I9100XENKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried another firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100XXKI4_I9100EPLKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
its in download mode which show on top left
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
so worried...
i dont know nothing about it.
Please can someone tell me what to do ??
Thanks
i have posted this thread twice. but no reply : ((
i had ICS installed in my Galaxy S2 by myself using Odin.
I tried to install Jelly bean , but failed and now its in Downloading mode. i dont know what to do know. i tired to install Ginger bread still stuck. i even dont know which stock rom i need. and where i can download it from ??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWKJ3_I9100XENKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried another firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100XXKI4_I9100EPLKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
its in download mode which show on top left
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
so worried...
i dont know nothing about it.
Please can someone tell me what to do ??
Thanks
Hello ,
This is my first post in this forum.
I have a Samsung Galaxy S4 and a Samsung Galaxy S3.
My problem is that my S3 is not starting anymore.
It is stuck on Log on screen and does nothing else.
It does not go on recovery mode.
I tried to format with Odin and it says : "There is no PIT partition "
I tried to install PIT from original S3 it says : Can't open the serial(COM) port.
I have tried different USB ports, tried with original S3 and S4 cables and KIES is unistalled but no luck.
Can someone help ?
You can try a rescue firmware which includes a pit:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
But you probably need a new motherboard.
boomboomer said:
You can try a rescue firmware which includes a pit:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
But you probably need a new motherboard.
Click to expand...
Click to collapse
I will try this but since there is a Port fail i doubt that it will work.
Thank you anyway.
I get this :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Try another version of odin, different lead, port or pc. Ensure kies is not running. Follow the guide on flashing to the letter.
Download the rom from sammobile and check the md5.
Sent from my GT-I9300 using Tapatalk
wicccked said:
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Click to expand...
Click to collapse
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
jaggythistle said:
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
Click to expand...
Click to collapse
jaggythistle, thank you for the answer.
I downloaded the stock kernel, successfully flashed it, downloaded the matching ROM (1-file this time), but now when trying to flash I'm getting the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH3_I9300UBEMH1_I9300ECOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
What can I do?
boomboomer, Thanks for the reply. I have checked it all, now I'm getting the above error.
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I have tried the rescue firmware and got the following error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
JJEgan said:
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
Click to expand...
Click to collapse
Tried it, Odin was hanging at the "Erase..." step for ~5-10 mins, then I got the error:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone has been softbricked(stuck on samsung logo) and the recovery mode has been blocked by frp lock.
My questions are: is the stock rom the model no(SM-J700M) and Country(TTT) firmware and if so when I flash on Odin, I get
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Have you tried just flashing the stock firmware with Odin?? That usually fixes that problem. If not try bypassing FRP.