Thread closed.
[Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v3.1i
Thread closed..
Thread closed...
Thread closed.....
Rerserved...
Thread closed....
Yank555 said:
For those using TWRP Recovery, I've updated the installer (v1.5a) to make it compatible with TWRP.
It still works totally fine with CWM as well, so you can use your preferred recovery
If you already are on v1.5, no need to reflash, there's nothing new in the kernel / Aroma Menu.
JP.
Click to expand...
Click to collapse
You did it faster than I came back from gym! Great work mate
Still having an amazing time on DLJ2 so great
Enviado desde mi GT-I9300 usando Tapatalk 2
Just flashed...... very fast and smooth hope to get good battery life, will see what its like in a few days. Thank you for your great work bro :thumbup:
Sent from my GT-I9300
Yank555 said:
For those using TWRP Recovery, I've updated the installer (v1.5a) to make it compatible with TWRP.
It still works totally fine with CWM as well, so you can use your preferred recovery
If you already are on v1.5, no need to reflash, there's nothing new in the kernel / Aroma Menu.
JP.
Click to expand...
Click to collapse
I flash it and even the installation went OK when I go in About phone it shows the Kernel I used before flashing this one. Since I used Franco's kernel it still says that I am on that Kernel.
Is this only happen to me?
Ninolina said:
I flash it and even the installation went OK when I go in About phone it shows the Kernel I used before flashing this one. Since I used Franco's kernel it still says that I am on that Kernel.
Is this only happen to me?
Click to expand...
Click to collapse
Can you flash it again and save the logs (button in aroma after flashing) and post the logfile for me to have a look ?
JP.
Sent from my HTC Sensation Z710e using xda app-developers app
Edit : --------------------------------------------------
I just flashed a different kernel, checked, reflashed 1.5a again, worked fine...
You did chose to install all, not just config ?
JP.
Yank555 said:
Can you flash it again and save the logs (button in aroma after flashing) and post the logfile for me to have a look ?
JP.
Sent from my HTC Sensation Z710e using xda app-developers app
Click to expand...
Click to collapse
Sorry, sorry, sorry...
It was my mistake. And I saw that when tried to flash it again. At the end of installation I selected Flash script and not flash kernel and that was my mistake. Now I choose the right one and it's all OK.
Sorry for this... I will test it a few hours and give you my feedback.
Ninolina said:
Sorry, sorry, sorry...
It was my mistake. And I saw that when tried to flash it again. At the end of installation I selected Flash script and not flash kernel and that was my mistake. Now I choose the right one and it's all OK.
Sorry for this... I will test it a few hours and give you my feedback.
Click to expand...
Click to collapse
Lol Ninolina just a guess but I think you don't have to sorry for anything! We are all learning in here Maybe from this Yank could add a "(default)" on that option? or kinda to avoid mistakes¿
MuertoKo said:
Lol Ninolina just a guess but I think you don't have to sorry for anything! We are all learning in here Maybe from this Yank could add a "(default)" on that option? or kinda to avoid mistakes¿
Click to expand...
Click to collapse
Yep, might try to change the labels to make it clearer in the next version
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
MuertoKo said:
Lol Ninolina just a guess but I think you don't have to sorry for anything! We are all learning in here Maybe from this Yank could add a "(default)" on that option? or kinda to avoid mistakes¿
Click to expand...
Click to collapse
Well, you may be right, but I just hate if I report something is wrong and than see it was my mistake and I false alarm it. It usually don't happen to me.
Btw yank, before sleep time, what you think about the readahead buffers some lower by default? I had some handups when multitasking hard and using 3Mb, on 512Kb still no related issue for now Even the "benefits" are hard to detect (even they are there I swear!) the "hickups" are easily detected
You could try yourself by switching to maybe even higher lvl's if you hadn't done it already. What you think on putting them a little bit down for the common user who has no clue on how this works?
PS: Multitasking meaning using internet or whatsapp while downloading some huge item like a film, where you have the SD card burning
MuertoKo said:
Btw yank, before sleep time, what you think about the readahead buffers some lower by default? I had some handups when multitasking hard and using 3Mb, on 512Kb still no related issue for now Even the "benefits" are hard to detect (even they are there I swear!) the "hickups" are easily detected
You could try yourself by switching to maybe even higher lvl's if you hadn't done it already. What you think on putting them a little bit down for the common user who has no clue on how this works?
PS: Multitasking meaning using internet or whatsapp while downloading some huge item like a film, where you have the SD card burning
Click to expand...
Click to collapse
Can do. I used to have them at 2Mb, upped them to 3Mb on the Sammy. Might be a bit too much ... if you do sequential reads it should help, but if it's random access it sure will generate unnecessary overhead.
What value works best for you ? 512 ? Have you tested 1024 ?
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
Yank555 said:
Can do. I used to have them at 2Mb, upped them to 3Mb on the Sammy. Might be a bit too much ... if you do sequential reads it should help, but if it's random access it sure will generate unnecessary overhead.
What value works best for you ? 512 ? Have you tested 1024 ?
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
Click to expand...
Click to collapse
Nt yet, initially I tested 256 and all went good, now up to 512 for some days, may go up to 1Mb if u wish
Any ideas on how to test the "good" situation to use it (for benefits) and the "bad" (for the "hickups")? You know way better than me how this works P And even if it's nearly unnoticeable all learnt is welcome
MuertoKo said:
Nt yet, initially I tested 256 and all went good, now up to 512 for some days, may go up to 1Mb if u wish
Any ideas on how to test the "good" situation to use it (for benefits) and the "bad" (for the "hickups")? You know way better than me how this works P And even if it's nearly unnoticeable all learnt is welcome
Click to expand...
Click to collapse
Well using a big readahead buffer on random reads (reading randomly accross inside of a file) should be bad, as you will have the system read let's say 4Mb ahead of what you asked for...
On the other hand reading a full file, e.g. copying it or watching a video ... should be better with a big buffer.
So the trick is to find the right balance...
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
great work but can any one please give us screenshots for battery usage and time screen on to judge??
Looking great man!
I'm reaaaaaally tempted to try this but i'll miss two features from perseus...
Gpu oc/uv and the "voodoo" port...
both should be kinda easy to import to this kernel i think...
It's not a request,don't get me wrong.It's more like a suggestion.
Anyway.Thank you very much for contributing here on xda and specifically on the S3 forums!
It always feels good to see a great "new" kernel/rom making it's way here!
I wish you the best mate...
Related
Ok... Here's the CRT zip. This is from Android Revolution Rom modded to work with our EVO 3D. Flash this in recovery.
Works for me in the Supra rom. I'm told this works on Viper too. Maybe some more.
I would backup just to be sure.
Wipe Dalvik and make sure animations are enabled and that they are set to a normal speed - in SpareParts.
Code:
[URL="http://www.multiupload.com/VKX23PECWJ"]With Hardware Acceleration[/URL]
I wanna thank TrevE cause that's where i got the idea from. compared smali files. So please thank him... Also he might have done a better job then me at it. So check out his ROM it's fast.
If it worked... thank me. or not.
I will take a break from this for a while. I need to deal with a family death. Check last post. Thank you
Linky no worky from phone.
Sent from my PG86100 using XDA Premium App
Now we need this on mik and cho's ROM.
Sent from my EVO 3D using Tapatalk
Testing now, will report back shortly.
EDIT: DID NOT work for me. Supra 1.2 with RCMIX kernel, blue GB icons, 1% circle battery mods.
I wiped cache and davlik before flashing this.
Crap,I don't know what to do with. Jar files yet
Sent from my PG86100 using XDA Premium App
What is this for? Pardon my ignorance.
Was this taken from a Sense 3.0/gingerbread/evo 3D rom?
Does this break Wifi / USB hotspot?
It didn't work on mine. If this is what i think it is, when you push the power/sleep button it looks like a crt monitor turning off ? It would be nice if it did work though, i am using supershooter rom right now.
freeza said:
Was this taken from a Sense 3.0/gingerbread/evo 3D rom?
Click to expand...
Click to collapse
Yes. it was.
smokin1337 said:
It didn't work on mine. If this is what i think it is, when you push the power/sleep button it looks like a crt monitor turning off ? It would be nice if it did work though, i am using supershooter rom right now.
Click to expand...
Click to collapse
I am uploading another file that has the GPU UI enabler too.
apatcas said:
I am uploading another file that has the GPU UI enabler too.
Click to expand...
Click to collapse
Nandroiding now, waiting for the original post to be edited....
Quick question, flashing this file will only change the SYSTEM partition right? I'm doing a full NANDROID now, but in the future I could just do the SYSTEM portion and be safe right?
well it worked for me im on viper rom with remix kernel and thys ginger theme. I dont know what or how much of a difference its made, it seems a little more responsive, all benchmarks are about the same, i guess linpack was a little more consistant instead of numbers being all over the place. Is there somthing else i should be checking with this?
Did not work on my 3d. Using Cho's/mik ROM.
BrianBaker said:
Crap,I don't know what to do with. Jar files yet
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Flash in recovery
danweb66 said:
well it worked for me im on viper rom with remix kernel and thys ginger theme. I dont know what or how much of a difference its made, it seems a little more responsive, all benchmarks are about the same, i guess linpack was a little more consistant instead of numbers being all over the place. Is there somthing else i should be checking with this?
Click to expand...
Click to collapse
Flash the second zip. That has the hardware accelerated UI. should fix the lattency if you have any.
It needs the GPU to work on this cause it's an animation.
apatcas said:
For those that dont have the GPU enabled UI here's the zip for that.
Click to expand...
Click to collapse
Noobish question, how do i know if I have the GPU enabled UI? Running Supra 1.2 with RCMIX kernel?
ok now when i run quadrant the cpu part of the test wont run which is a shame cause the numbers on everything else is much higher.
e_town said:
Nandroiding now, waiting for the original post to be edited....
Quick question, flashing this file will only change the SYSTEM partition right? I'm doing a full NANDROID now, but in the future I could just do the SYSTEM portion and be safe right?
Click to expand...
Click to collapse
mods the build.prop and system yes.
Flashing second zip now.. Will report.
Not sure if any of you have run into this yet, but I am using Pocket Casts to listen to netcasts, when I shut off the screen everything keeps playing fine, however when I turn back on the screen the phone soft reboots. Does it at the same spot every time. I tried moving the netcasts to the sdcard instead of external sd as a test. Still does it...
This happens to me on both the Aug 8th and 9th build from DAGr8, But does not happen on any of the other JB previews builds. And Yes, I wiped everything
I use my phone in the car for netcast listening a ton, so this is something that keeps me from using this daily unfortunately.
Other than that, everything else seems to run great. just seems like an odd thing to reboot the phone, maybe it has something to do with the audio players and how they interact with the lock screen as they like to put up a player wallpaper thing on the lock screen...
Thanks for the Q&A!!
I can not get google now working. It hangs on initializing then cant connect. I know on jamies cm10hybrid/ jb we needed the internal kernel....DAGr8 Do you think that kernel would solve the prob? Im not sure if you use Gnow....or if you recommend using a diff kernel...( going to re read op now too)
Thank you so much for AOKP!
Sent from my SAMSUNG-SGH-I717 using Xparent SkyBlue Tapatalk 2
Rocket42 said:
Thanks for the Q&A!!
I can not get google now working. It hangs on initializing then cant connect. I know on jamies cm10hybrid/ jb we needed the internal kernel....DAGr8 Do you think that kernel would solve the prob? Im not sure if you use Gnow....or if you recommend using a diff kernel...( going to re read op now too)
Thank you so much for AOKP!
Sent from my SAMSUNG-SGH-I717 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
The hotwire-internal kernel should work fine with DAG's JB rom, not sure if it'll fix your issue or not, but should be easy to test. But I don't see a kernel package from DAG if you wanted to flash back...
I prefer the hotwire-internal kernel myself as it has BLN support where as the R5S1 included with this rom i think does not? if that's important to you...
Rocket42 said:
Thanks for the Q&A!!
I can not get google now working. It hangs on initializing then cant connect. I know on jamies cm10hybrid/ jb we needed the internal kernel....DAGr8 Do you think that kernel would solve the prob? Im not sure if you use Gnow....or if you recommend using a diff kernel...( going to re read op now too)
Thank you so much for AOKP!
Sent from my SAMSUNG-SGH-I717 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I'm also seeing that behavior with Google Now. Regardless, I'm loving this ROM. So glad to see a JB build of AOKP!
Rocket42 said:
Thanks for the Q&A!!
I can not get google now working. It hangs on initializing then cant connect. I know on jamies cm10hybrid/ jb we needed the internal kernel....DAGr8 Do you think that kernel would solve the prob? Im not sure if you use Gnow....or if you recommend using a diff kernel...( going to re read op now too)
Thank you so much for AOKP!
Sent from my SAMSUNG-SGH-I717 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Excellent observation! I would like to know this too. Ill just flash it anyway. What could go wrong? lol. Also sometimes the voice to text option doesnt connect. I think youre onto something here Rocket42.
I know we're not supposed to ask for ETA's and im not but does anyone know (in lamen's terms) the reason why camcorder doesnt work? Is it a compatibility issue cause JB is so new?
graveghoul said:
Excellent observation! I would like to know this too. Ill just flash it anyway. What could go wrong? lol. Also sometimes the voice to text option doesnt connect. I think youre onto something here Rocket42.
I know we're not supposed to ask for ETA's and im not but does anyone know (in lamen's terms) the reason why camcorder doesnt work? Is it a compatibility issue cause JB is so new?
Click to expand...
Click to collapse
I think the issue is in the CM10 base - JB PA also has broken video at the moment.
Edit: I see JB PA dropped an update this morning and I didn't see reference to broken video on the OP. Maybe a matter of time? :fingers-crossed:
Lol tried the kernel and the Google now zips for ICS last night .neither worked hopefully build 2 works now
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rg1973 said:
Lol tried the kernel and the Google now zips for ICS last night .neither worked hopefully build 2 works now
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Sorry - which kernel did you try?
From my DAGr8 JB AOKP Powered Note
Rob Irizarry said:
Sorry - which kernel did you try?
From my DAGr8 JB AOKP Powered Note
Click to expand...
Click to collapse
The hotkernal that the cm10 uses
Sent from my Xoom using xda app-developers app
omniphil said:
The hotwire-internal kernel should work fine with DAG's JB rom, not sure if it'll fix your issue or not, but should be easy to test. But I don't see a kernel package from DAG if you wanted to flash back...
I prefer the hotwire-internal kernel myself as it has BLN support where as the R5S1 included with this rom i think does not? if that's important to you...
Click to expand...
Click to collapse
Loving the Aug 9th build except for a few issues (incl the Google Now referred to above) - the changelog states that "wake on volume" is built in but it neither works nor do I see a setting to turn it on like in other CM9/CM10. Do any of you have that?
On the kernel thing would we just flash the AOKP JB and then flash hotwire's internal.zip, then followed by JB Gapps?
docfreed said:
Loving the Aug 9th build except for a few issues (incl the Google Now referred to above) - the changelog states that "wake on volume" is built in but it neither works nor do I see a setting to turn it on like in other CM9/CM10. Do any of you have that?
On the kernel thing would we just flash the AOKP JB and then flash hotwire's internal.zip, then followed by JB Gapps?
Click to expand...
Click to collapse
It doesnt do anything , for the ROM Google now still not working , theyll get it sooner or later
There's more to it i flashed the stand alone Google now and it still doesn't work ,like I said theyll fix it
Sent from my Xoom using xda app-developers app
docfreed said:
Loving the Aug 9th build except for a few issues (incl the Google Now referred to above) - the changelog states that "wake on volume" is built in but it neither works nor do I see a setting to turn it on like in other CM9/CM10. Do any of you have that?
On the kernel thing would we just flash the AOKP JB and then flash hotwire's internal.zip, then followed by JB Gapps?
Click to expand...
Click to collapse
I can't find that setting either.
As far as the flashing sequence, that should work although I did AOKP, JB GAPPS and just a few minutes ago flashed hotwire's internal. No issues to report.
I used to change kernels all the time on my Nexus, I would just flash the kernel whenever, no wiping. Can't hurt to wipe cache/dalvik, but no need to reflash the ROM.
Rob Irizarry said:
I can't find that setting either.
As far as the flashing sequence, that should work although I did AOKP, JB GAPPS and just a few minutes ago flashed hotwire's internal. No issues to report.
Click to expand...
Click to collapse
Just found it - it is under Settings>Rom Control>General UI>Volume rocker wake
Screenshot???
The ROM is solid.. working pretty great for a preview!!!!!
Anyone know how to screenshot?
tried the usual steps but no luck. tried power button hold and home+Power...
everything else other than google now is working...
vegetto109 said:
The ROM is solid.. working pretty great for a preview!!!!!
Anyone know how to screenshot?
tried the usual steps but no luck. tried power button hold and home+Power...
everything else other than google now is working...
Click to expand...
Click to collapse
Totally agree if we can get voice search and Google now it be pretty perfect
.its my fav so far
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
vegetto109 said:
The ROM is solid.. working pretty great for a preview!!!!!
Anyone know how to screenshot?
tried the usual steps but no luck. tried power button hold and home+Power...
everything else other than google now is working...
Click to expand...
Click to collapse
Vol down and power
Sent from my SAMSUNG-SGH-I717 using Xparent SkyBlue Tapatalk 2
Anyone know how to turn off the pen pointer? I tried the fix to edit the pen file but that didn't seem to work. Also, I am getting Process:system is not responding error. Any ideas on either of these?
Features and changelog?
I'm sure I will feel dumb when someone answers this but I could not find the feature list or changelog for JB. The AOKP site only references ICS milestone 6 as the latest. I tried following the links from the DEV thread and I tried a google search which led to rootzwiki but I didn't find anything for the Galaxy Note. I'd like to try this out but I'd first like to know what is/isn't working.
CPU Settings Do Not Stick
I have gone into the performance settings and I usually change my min frequency to 192 (max at 1566) and checked on "set on boot"- I have noticed that the frequencies do not stick at all but keep reverting to 384/1566 - does anyone else see this?
EDIT: Some users are reporting that they get a Sim locked message. Flash this at your own risk!
Please stop and check out ShoStock3. I haven't used it, but it's probably way better than this. c;
SPECIAL THX TO:
jeboo for the kernel
LegendK95 for the original i9100 zip
WHAT DID I CHANGE?
- I packaged jeboo's kernel (Thanks jeboo!) and the UCLE5 modem in the zip (so no Odin is necessary)
- Other little tweaks and stuff
PROBLEMS?
Just about everything is fixed now. Thanks again Jeboo!
v3 CHANGELOG IN THIRD POST
TO INSTALL:
1. Download zip below and place at the root of your SD card
2. Boot into your custom recovery
3. Wipe data/cache/dalvic cache
4. Flash zip mentioned earlier
5. Reboot
DOWNLOAD
v3.5
Reserved for screenshots.
Code:
CHANGELOG
v3
Ripple Lock now added
Better reboot menu
Sony Bravia and Xloud engines
New kernel that fixes everything that didn't work in the past
FAQ
CAN I DUALBOOT?
No, sorry... Maybe in the future though!
BATTERY LIFE TIPS!
- Underclock phone to a max of 1000
- change governor to powersave mode and just change it back to ondemand when playing, let's say, a game.
- Freeze unnecessary apps, but only if you know what you are doing.
- Kill unused tasks regularly.
HOW TO MAKE YOUR PHONE FASTER!
In settings, enable developer options and make all animations speeds to 0.5 and your phone will feel so much faster!
You may want to check the SGS2 app and theme forum.
Found this
[MOD] JB 4-Way Reboot (XXLSJ)
[MOD][LSJ] Ripple+4 Icons+ on/off toggle+ 4 way rotation+ WIFI P2P+ A LOT MORE[18/11]
[MOD] [4.1.2] [LSJ] More toggles on jelly bean leaked
[THEME]Water Ripple effects, Smart Rotation for XXLSJ firmware
Also another one in Rom Forum
[HOW TO] [4.1.2] [LSJ] Proper disable HOME BUTTON LAG (18 NOV)
72ls1 said:
You may want to check the SGS2 app and theme forum.
Found this
4-way reboot
All-In-One Mod
Click to expand...
Click to collapse
Wow thank you!
I will see if I can get permission to add the All-in-One mod c:
good job~`I need this kernel !can You upload it？THX
Downloaded this and been using for about an hour now.amazing. thanks so much for this bro!
---------- Post added at 09:05 PM ---------- Previous post was at 08:20 PM ----------
Totally right though about the play store problem.won't allow for any installs. Just gives the error that it couldn't be installed on usb storage or sd card. Hmmm. Wonder why though. Ah well,I have pretty much all the apps I need backed up to titanium backup
Phalanx7621 said:
Downloaded this and been using for about an hour now.amazing. thanks so much for this bro!
---------- Post added at 09:05 PM ---------- Previous post was at 08:20 PM ----------
Totally right though about the play store problem.won't allow for any installs. Just gives the error that it couldn't be installed on usb storage or sd card. Hmmm. Wonder why though. Ah well,I have pretty much all the apps I need backed up to titanium backup
Click to expand...
Click to collapse
That is typically a kernel issue.
my phone fell out of my pocket a few hours ago and into the dog's water bowl. as soon as i have the balls to put the battery back in.... this will be the first thing i download. i cant wait to see what real jelly tastes like.
thanks a ton
-patrick
Thanks for all your support guys!
I'm going to update this tomorrow or Tuesday and fix a couple of things and I was wondering if I should keep the DPI at 220 or change it to 200. Also, I might as well change the buildprop to say i777 xD
Nice I will test this later
Law? I am the law.
estabien said:
Thanks for all your support guys!
I'm going to update this tomorrow or Tuesday and fix a couple of things and I was wondering if I should keep the DPI at 220 or change it to 200. Also, I might as well change the buildprop to say i777 xD
Click to expand...
Click to collapse
My vote is for keeping the dpi as is. I'll be 30 next month and my eyes aren't what they once were
is it possible to have the capacitive keys enabled?
prctst said:
is it possible to have the capacitive keys enabled?
Click to expand...
Click to collapse
Nope, from my understanding we'll need i777 Jb kernel source for them...
So is this a true Samsung jellybean rom? Minus the capacitive buttons?
Sent from my SAMSUNG-SGH-I777 using xda premium
Downloaded and installed and its working pretty good but man its so smooth its scary
Sent from my GT-I9100 using xda app-developers app
slayaman22232 said:
Downloaded and installed and its working pretty good but man its so smooth its scary
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I know dude! For a leak this really works well. I'm gonna run this for quite a while i think. Very stable, haven't had one single force close or SOD.
I guess I will wait until I'm not required to Odin a new kernel if I wanna switch I dislike not having cwm abilities
Law? I am the law.
Virus1x said:
I guess I will wait until I'm not required to Odin a new kernel if I wanna switch I dislike not having cwm abilities
Law? I am the law.
Click to expand...
Click to collapse
Or just use mobile Odin. The free version allows kernel flashing and no cables required I haven't tried it yet but I assume it would work fine.
Other then the problems that exist, this is extremely buttery. Has anyone got the 50gb Dropbox to work? Mine still shows 2.5 gb
Hello again
As you may know Turbo kernel [Multiboot] and "STOCK" Based ICS ROMS breaks the Camera. Well one thing Dan told me it that swapping the drivers form a CM9 based rom should fix the camera, so i did and it indeed worked! so i whipped up a simple patch that will install the Drivers to your ICS ROM on turbo kernel and fix your camera!
Download it ->HERE!<-
Or in attachments below
Thanks to FXP for driver locations :good:
MUST BE FLASHED IN CWM RECOVERY!!!
I don't know why but i always get a lot of errors in TWRP recovery
AW: [PATCH] XDM Turbo Kernel Android ICS Camera Fix
May this work on gingerbread??
Or could you do a patch for gingerbread??
Spatinator said:
May this work on gingerbread??
Or could you do a patch for gingerbread??
Click to expand...
Click to collapse
GB is a totally different story, That has something to do with the kernel itself. only Dan can fix that, but he's gone
AW: [PATCH] XDM Turbo Kernel Android ICS Camera Fix
xdarkmario said:
GB is a totally different story, That has something to do with the kernel itself. only Dan can fix that, but he's gone
Click to expand...
Click to collapse
Ok thanks
Yeah really sad that Dan has left the 2011 xperia line.
What all did you put into your zip? It was only one file in the /system/lib/hw/ folder called camera.semc.so that needed to be swaped from cm9 (sorry Im not using 4shared.....)
216Monster said:
What all did you put into your zip? It was only one file in the /system/lib/hw/ folder called camera.semc.so that needed to be swaped from cm9 (sorry Im not using 4shared.....)
Click to expand...
Click to collapse
yep thats it, i can put that file in the attachments if you want, is't small.
xdarkmario said:
yep thats it, i can put that file in the attachments if you want, is't small.
Click to expand...
Click to collapse
no thats ok ( for me at least ) I already have it , Just glad to see a patch for it and wasnt sure if there was anything else
216Monster said:
no thats ok ( for me at least ) I already have it , Just glad to see a patch for it and wasnt sure if there was anything else
Click to expand...
Click to collapse
ok
xdarkmario said:
ok
Click to expand...
Click to collapse
nicely done man..thanks.:good:
<MOD EDIT>
Sorry that i have a personal life.
I dont get money for it and also i am developing for the Xperia p and own the Dutch miui site
I will start working on it as soon as i have time.
Also you guys dont know what i already have done for the play, because that was before your time here.
@op i will see if i can and this fix to the kernel
Sent from my LT22i using xda app-developers app
nickholtus said:
Sorry that i have a personal life.
I dont get money for it and also i am developing for the Xperia p and own the Dutch miui site
I will start working on it as soon as i have time.
Also you guys dont know what i already have done for the play, because that was before your time here.
@op i will see if i can and this fix to the kernel
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Thanks man thatd be awesome it'd you could continue turbo kernel. If not then oh well but I hope you can. Also if you run an miui site would you be able to stabilize dans miui5?
Sent from my r800x using xda developers app
nickholtus said:
I dont get money for it and also i am developing for the Xperia p and own the Dutch miui site
I will start working on it as soon as i have time.
Also you guys dont know what i already have done for the play, because that was before your time here.
@op i will see if i can and this fix to the kernel
Click to expand...
Click to collapse
nick should take your time..anything he can do for play,surely he is going to do it...instead of turbo kernel,maybe you can help develop MUIU 5 already started by Dan..just a suggestion since i think maybe you the one that can do it..and turbo kernel is already the best kernel and stable. thanks for your work all FREE and sorry for something said here that im sure you dont deserve it.
Guys please try and keep on-topic here and resist the urge to argue or throw insults at other members.
Thread cleaned... and I'd prefer not to have to return for the same reasons.
Thanks.
tried this on jellyzeus with turbo kernel, and on leagecy camera the panorama doesn't force close. it show black preview and let pushing the green button, but not takes any panorama
ravid1323 said:
tried this on jellyzeus with turbo kernel, and on leagecy camera the panorama doesn't force close. it show black preview and let pushing the green button, but not takes any panorama
Click to expand...
Click to collapse
jellyzeus is JB, this fix is only for the ICS-Sony Stock based roms
[email protected] said:
jellyzeus is JB, this fix is only for the ICS-Sony Stock based roms
Click to expand...
Click to collapse
you don't say? but i'm telling what happened. and this, is what happened to me. this is making leagecy camera not forcing close when swiching panorama, but not viewing, or saving. this is write for ics because in the thiory, it fixing stock ics on turbo ternel, but it also did this, just no one thought so
R: [PATCH] XDM Turbo Kernel Android ICS Camera Fix
ravid1323 said:
you don't say? but i'm telling what happened. and this, is what happened to me. this is making leagecy camera not forcing close when swiching panorama, but not viewing, or saving. this is write for ics because in the thiory, it fixing stock ics on turbo ternel, but it also did this, just no one thought so
Click to expand...
Click to collapse
my fault, I haven't tried the panorama function on jb, so I have understand that this mod break the feature
Inviato dal mio Nexus 7 con Tapatalk 2
[email protected] said:
my fault, I haven't tried the panorama function on jb, so I have understand that this mod break the feature
Inviato dal mio Nexus 7 con Tapatalk 2
Click to expand...
Click to collapse
the panorama break on jb from the first place. it all the time force close. it is prevent from the panorama to force close
nickholtus said:
<MOD EDIT>
Sorry that i have a personal life.
I dont get money for it and also i am developing for the Xperia p and own the Dutch miui site
I will start working on it as soon as i have time.
Also you guys dont know what i already have done for the play, because that was before your time here.
@op i will see if i can and this fix to the kernel
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Well I didn't mean to insult you but come on... That wasn't nice that you've promised something and you haven't done what you've promised. Just you know I don't demand anything from you or anything but many people got excited and that's it. Nothing but excitement we've had. Take your time but please finally make your words true because you can see a lot of people saying the will do something and finally the don't.
Hope you will do something and won't get angry on me, I didn't mean to insult or offend you.
nickholtus said:
<MOD EDIT>
Sorry that i have a personal life.
I dont get money for it and also i am developing for the Xperia p and own the Dutch miui site
I will start working on it as soon as i have time.
Also you guys dont know what i already have done for the play, because that was before your time here.
@op i will see if i can and this fix to the kernel
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
I do know.
Posting my kernels here so its less difficult to find. I'll clean up the thread later. Main credits go to @Zarboz and @.torrented
Updated: 4/24
Fauxless
GPE:
http://www.androidfilehost.com/?fid=23329332407588931
Sense:
http://www.androidfilehost.com/?fid=23329332407588933
+Faux123's gamma/sound control
GPE:
http://www.androidfilehost.com/?fid=23329332407588930
Sense:
http://www.androidfilehost.com/?fid=23329332407588932
Features:
Frontswap
Gamma control
Governor optimizations
F2FS
CIFS
NTFS
Slimbus OC
Increased Gain
Various sound driver optimization s
Faux sound control
Drive droid compatibility
Sweep2Wake
Sweep2Sleep
DoubleTap2Wake
GPU OC
CPU OC
Arm Topology driver
CPU power driver
TCP congestion control
Voltage Control
DynFsync
ect...
Source link:
https://github.com/iHateWEBos/Monarudo_M7_port/commits/hate
Additional credit goes to every kernel dev you've ever heard of, since very few XDA kernels contain 100% original work.
XDA:DevDB Information
iHate Kernel, a Kernel for the HTC Droid DNA
Contributors
iHateWebOS, zarboz, .torrented
Kernel Special Features: s2w,s2s,dt2w,cifs,NTFS,F2fs,kexec
Version Information
Status: Stable
Created 2014-04-22
Last Updated 2014-04-24
Reserved
Q: why are there faux and faux free versions?
A: i love a lean kernel. with that said if you never plan on messing with gamma, or
purchasing FauxSound control app then i suggest you use the versions that dont have those features.
makes no sense to use a kernel with lots of bells and whistles youll never use.
Q: whats frontswap?
A: Frontswap -- and cleancache -- with a fairly small impact on the kernel,
provides a huge amount of flexibility for more dynamic, flexible RAM
utilization in various system configurations
When a workload starts swapping, performance falls through the floor.
Frontswap significantly increases performance in many such workloads by
providing a clean, dynamic interface to read and write swap pages to
"transcendent memory" that is otherwise not directly addressable to the kernel.
This interface is ideal when data is transformed to a different form
and size (such as with compression) or secretly moved (as might be
useful for write-balancing for some RAM-like devices). Swap pages (and
evicted page-cache pages) are a great use for this kind of slower-than-RAM-
but-much-faster-than-disk "pseudo-RAM device" and the frontswap (and
cleancache) interface to transcendent memory provides a nice way to read
and write -- and indirectly "name" -- the pages.
Q: I heard if you disable swap, then performance increases.
A: Bottom line is that, without swap:
1. Your system will be less stable.
2. Your system will not be able to hibernate as well.
3. Disk access speed in your system will be slower compared to a system that has swap partition.
Moreover, disk access speed will drop in the course of time.
Q: ive been messing with my frequency settings, and they wont stick. what gives?
A: the installer hardcodes min/max frequencies. if youd like to try something different
run the installer again, and pick new min/max frequencies there.
Q: I'm trying to use gamma control,but the settings dont seem to stick once my screen shuts on/off.
A: im aware of this. if you use the FauxControl app from the playstore your setting will stick better
however youll still have to cycle your screen on/off to reapply the values. im looking into this and hopefully
will figure this issue out soon.
Q: DriveDroid?
A: this is an app that allows you to use your phone as a bootdisk for your PC.
Q: My phones really hot, what the heck did you do!?
A: put your phone down. heavy use of your phone will make it hot. no amount of
kernel magic will keep your phone cool while under heavy use.
Q: just to spite you ive been flashing GPE kernels on sense roms, and they WORK!!!!
A: yes they boot, but any issues you have while expiermenting will make it more difficult
to seperate user error from kernel error. please just use GPE for GPE based roms and SENSE for
SENSE based roms.
Q: if i see you on the street, can i shake your hand?
A: NO
Q: can we have more governors?
A: no, kernels dont like redundancy. having four governors based on the on-demand governor just
isnt good practice.
Thanks mate!! Can I use this in Insertcoin?
EDIT : Also anyway to implement kexec-hardboot?
EDIT 2 : Sorry for the questions, just figure I'd ask now before the thread gets flooded with this question.. but since we have m8 kernel source is there any way to get motion gestures, again, sorry for the questions.
Sent from my HTC Droid DNA using Tapatalk
Sorry for the stupid question :
The difference between GPE kernel and Sense kernel? Because I have flashing a GPE kernel with Sense rom (Insertcoin v2.3.0)and it also works well.
xXminiWHOOPERxX said:
Thanks mate!! Can I use this in Insertcoin?
EDIT : Also anyway to implement kexec-hardboot?
EDIT 2 : Sorry for the questions, just figure I'd ask now before the thread gets flooded with this question.. but since we have m8 kernel source is there any way to get motion gestures, again, sorry for the questions.
Sent from my HTC Droid DNA using Tapatalk
Click to expand...
Click to collapse
Kexec-hardboot is kind of pointless right now until I figure out why it won't boot sense as the primary rom, but I believe it's already enabled, it was in .torrented's versions at least. Btw if you think you might have any ideas on how to fix that, help is welcome. Pretty sure it has something to do with how partitions are mounted. If you look through the multirom thread you can see my unsuccessful attempts to fix it.
@iHateWebOS good to see your own thread for this
Sent from my iPad using Tapatalk
ancola66 said:
Sorry for the stupid question :
The difference between GPE kernel and Sense kernel? Because I have flashing a GPE kernel with Sense rom (Insertcoin v2.3.0)and it also works well.
Click to expand...
Click to collapse
Gpe kernel will boot on sense, but you may have touch issues ect. To be on the safe side, and to avoid false bug reports Im posting the two versions.
Sent from my ADR6425LVW using Tapatalk
I'm using Google Now Launcher on a Sense 6 ROM and everything is good. Is there a recommendation of Sense over GPE as Sense is my base or should I be using GPE?
Sense base = sense kernel. Gpe base = Gpe kernel.
Sent from my ADR6425LVW using Tapatalk
iHateWebOS said:
Posting my kernels here so its less difficult to find. I'll clean up the thread later. Main credits go to @zarboz and @.torrented
With faux features
GPE:
http://www.androidfilehost.com/?fid=23329332407588146
Sense:
http://www.androidfilehost.com/?fid=23329332407588145
Click to expand...
Click to collapse
Thank you for doing this!
Cheers
What are your recommended settings for the best battery life?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
warpurlgis said:
What are your recommended settings for the best battery life?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
+1
I need settings for best battery life ( balanced performance )
HTC Droid DNA
ecselite said:
+1
I need settings for best battery life ( balanced performance )
HTC Droid DNA
Click to expand...
Click to collapse
The default settings set at default clock speed will net you the best balance. If your looking for more juice run the fauxless version with all wake options disabled.
Sent from my HTC6525LVW using Tapatalk
Hello,
Has anyone tried the Faux enabled Sense kernel on Santoid's NuSense 4.4? Wouldn't boot for me.
Cheers!
jschill31 said:
Hello,
Has anyone tried the Faux enabled Sense kernel on Santoid's NuSense 4.4? Wouldn't boot for me.
Cheers!
Click to expand...
Click to collapse
Using that combo right now........ I'll download again and double check
Edit: yup its all good, must got a bad download.
Sent from my HTC6525LVW using Tapatalk
jschill31 said:
Hello,
Has anyone tried the Faux enabled Sense kernel on Santoid's NuSense 4.4? Wouldn't boot for me.
Cheers!
Click to expand...
Click to collapse
Working good for me.
Sent from my HTC6525LVW using xda app-developers app
berniemac2021 said:
Working good for me.
Sent from my HTC6525LVW using xda app-developers app
Click to expand...
Click to collapse
iHateWebOS said:
Using that combo right now........ I'll download again and double check
Edit: yup its all good, must got a bad download.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Interesting, thank you for the response. Just to be clear you are using his build version R4.4 (not the newest that was rebased)? I ended up with a frozen boot then the display split into colored lines before going black. I am well versed in compiling roms but was not sure if base is a factor for kernels.
Thanks
jschill31 said:
Interesting, thank you for the response. Just to be clear you are using his build version R4.4 (not the newest that was rebased)? I ended up with a frozen boot then the display split into colored lines before going black. I am well versed in compiling roms but was not sure if base is a factor for kernels.
Thanks
Click to expand...
Click to collapse
Using 5.2 now but I've been using his sense 6 rom sense release. It's what I've used for everything I've released so far. As long as its sense android version is 4.4.2 you should be good to go
Sent from my HTC6525LVW using Tapatalk
iHateWebOS said:
Using 5.2 now but I've been using his sense 6 rom sense release. It's what I've used for everything I've released so far. As long as its sense android version is 4.4.2 you should be good to go
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
OK must be a bad flash...I will re download and try again. I can't remember ever having a bad download. I was unsure if your newest posts was only designed to work with his current base.
Thanks
Update:
Re downloaded and checked md5...good download same results. Screen gets stuck at boot then multi-color lines before going to a grey blank screen. I have all the latest firmware and radios, not sure why the Faux enabled Sense kernel will not work for me.
Sent from my AT10-A using Tapatalk
jschill31 said:
OK must be a bad flash...I will re download and try again. I can't remember ever having a bad download. I was unsure if your newest posts was only designed to work with his current base.
Thanks
Update:
Re downloaded and checked md5...good download same results. Screen gets stuck at boot then multi-color lines before going to a grey blank screen. I have all the latest firmware and radios, not sure why the Faux enabled Sense kernel will not work for me.
Sent from my AT10-A using Tapatalk
Click to expand...
Click to collapse
Does the light version work for you?
Sent from my HTC6525LVW using Tapatalk
@iHateWebOS - is FFC enabled in these builds, like the ones you've given me in the beastmode thread? If I follow this thread and flash updates, is it the same kernel as those builds? Thanks!
They should be fine for Venom 3.5.0 right?