Posting my kernels here so its less difficult to find. I'll clean up the thread later. Main credits go to @Zarboz and @.torrented
Updated: 4/24
Fauxless
GPE:
http://www.androidfilehost.com/?fid=23329332407588931
Sense:
http://www.androidfilehost.com/?fid=23329332407588933
+Faux123's gamma/sound control
GPE:
http://www.androidfilehost.com/?fid=23329332407588930
Sense:
http://www.androidfilehost.com/?fid=23329332407588932
Features:
Frontswap
Gamma control
Governor optimizations
F2FS
CIFS
NTFS
Slimbus OC
Increased Gain
Various sound driver optimization s
Faux sound control
Drive droid compatibility
Sweep2Wake
Sweep2Sleep
DoubleTap2Wake
GPU OC
CPU OC
Arm Topology driver
CPU power driver
TCP congestion control
Voltage Control
DynFsync
ect...
Source link:
https://github.com/iHateWEBos/Monarudo_M7_port/commits/hate
Additional credit goes to every kernel dev you've ever heard of, since very few XDA kernels contain 100% original work.
XDA:DevDB Information
iHate Kernel, a Kernel for the HTC Droid DNA
Contributors
iHateWebOS, zarboz, .torrented
Kernel Special Features: s2w,s2s,dt2w,cifs,NTFS,F2fs,kexec
Version Information
Status: Stable
Created 2014-04-22
Last Updated 2014-04-24
Reserved
Q: why are there faux and faux free versions?
A: i love a lean kernel. with that said if you never plan on messing with gamma, or
purchasing FauxSound control app then i suggest you use the versions that dont have those features.
makes no sense to use a kernel with lots of bells and whistles youll never use.
Q: whats frontswap?
A: Frontswap -- and cleancache -- with a fairly small impact on the kernel,
provides a huge amount of flexibility for more dynamic, flexible RAM
utilization in various system configurations
When a workload starts swapping, performance falls through the floor.
Frontswap significantly increases performance in many such workloads by
providing a clean, dynamic interface to read and write swap pages to
"transcendent memory" that is otherwise not directly addressable to the kernel.
This interface is ideal when data is transformed to a different form
and size (such as with compression) or secretly moved (as might be
useful for write-balancing for some RAM-like devices). Swap pages (and
evicted page-cache pages) are a great use for this kind of slower-than-RAM-
but-much-faster-than-disk "pseudo-RAM device" and the frontswap (and
cleancache) interface to transcendent memory provides a nice way to read
and write -- and indirectly "name" -- the pages.
Q: I heard if you disable swap, then performance increases.
A: Bottom line is that, without swap:
1. Your system will be less stable.
2. Your system will not be able to hibernate as well.
3. Disk access speed in your system will be slower compared to a system that has swap partition.
Moreover, disk access speed will drop in the course of time.
Q: ive been messing with my frequency settings, and they wont stick. what gives?
A: the installer hardcodes min/max frequencies. if youd like to try something different
run the installer again, and pick new min/max frequencies there.
Q: I'm trying to use gamma control,but the settings dont seem to stick once my screen shuts on/off.
A: im aware of this. if you use the FauxControl app from the playstore your setting will stick better
however youll still have to cycle your screen on/off to reapply the values. im looking into this and hopefully
will figure this issue out soon.
Q: DriveDroid?
A: this is an app that allows you to use your phone as a bootdisk for your PC.
Q: My phones really hot, what the heck did you do!?
A: put your phone down. heavy use of your phone will make it hot. no amount of
kernel magic will keep your phone cool while under heavy use.
Q: just to spite you ive been flashing GPE kernels on sense roms, and they WORK!!!!
A: yes they boot, but any issues you have while expiermenting will make it more difficult
to seperate user error from kernel error. please just use GPE for GPE based roms and SENSE for
SENSE based roms.
Q: if i see you on the street, can i shake your hand?
A: NO
Q: can we have more governors?
A: no, kernels dont like redundancy. having four governors based on the on-demand governor just
isnt good practice.
Thanks mate!! Can I use this in Insertcoin?
EDIT : Also anyway to implement kexec-hardboot?
EDIT 2 : Sorry for the questions, just figure I'd ask now before the thread gets flooded with this question.. but since we have m8 kernel source is there any way to get motion gestures, again, sorry for the questions.
Sent from my HTC Droid DNA using Tapatalk
Sorry for the stupid question :
The difference between GPE kernel and Sense kernel? Because I have flashing a GPE kernel with Sense rom (Insertcoin v2.3.0)and it also works well.
xXminiWHOOPERxX said:
Thanks mate!! Can I use this in Insertcoin?
EDIT : Also anyway to implement kexec-hardboot?
EDIT 2 : Sorry for the questions, just figure I'd ask now before the thread gets flooded with this question.. but since we have m8 kernel source is there any way to get motion gestures, again, sorry for the questions.
Sent from my HTC Droid DNA using Tapatalk
Click to expand...
Click to collapse
Kexec-hardboot is kind of pointless right now until I figure out why it won't boot sense as the primary rom, but I believe it's already enabled, it was in .torrented's versions at least. Btw if you think you might have any ideas on how to fix that, help is welcome. Pretty sure it has something to do with how partitions are mounted. If you look through the multirom thread you can see my unsuccessful attempts to fix it.
@iHateWebOS good to see your own thread for this
Sent from my iPad using Tapatalk
ancola66 said:
Sorry for the stupid question :
The difference between GPE kernel and Sense kernel? Because I have flashing a GPE kernel with Sense rom (Insertcoin v2.3.0)and it also works well.
Click to expand...
Click to collapse
Gpe kernel will boot on sense, but you may have touch issues ect. To be on the safe side, and to avoid false bug reports Im posting the two versions.
Sent from my ADR6425LVW using Tapatalk
I'm using Google Now Launcher on a Sense 6 ROM and everything is good. Is there a recommendation of Sense over GPE as Sense is my base or should I be using GPE?
Sense base = sense kernel. Gpe base = Gpe kernel.
Sent from my ADR6425LVW using Tapatalk
iHateWebOS said:
Posting my kernels here so its less difficult to find. I'll clean up the thread later. Main credits go to @zarboz and @.torrented
With faux features
GPE:
http://www.androidfilehost.com/?fid=23329332407588146
Sense:
http://www.androidfilehost.com/?fid=23329332407588145
Click to expand...
Click to collapse
Thank you for doing this!
Cheers
What are your recommended settings for the best battery life?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
warpurlgis said:
What are your recommended settings for the best battery life?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
+1
I need settings for best battery life ( balanced performance )
HTC Droid DNA
ecselite said:
+1
I need settings for best battery life ( balanced performance )
HTC Droid DNA
Click to expand...
Click to collapse
The default settings set at default clock speed will net you the best balance. If your looking for more juice run the fauxless version with all wake options disabled.
Sent from my HTC6525LVW using Tapatalk
Hello,
Has anyone tried the Faux enabled Sense kernel on Santoid's NuSense 4.4? Wouldn't boot for me.
Cheers!
jschill31 said:
Hello,
Has anyone tried the Faux enabled Sense kernel on Santoid's NuSense 4.4? Wouldn't boot for me.
Cheers!
Click to expand...
Click to collapse
Using that combo right now........ I'll download again and double check
Edit: yup its all good, must got a bad download.
Sent from my HTC6525LVW using Tapatalk
jschill31 said:
Hello,
Has anyone tried the Faux enabled Sense kernel on Santoid's NuSense 4.4? Wouldn't boot for me.
Cheers!
Click to expand...
Click to collapse
Working good for me.
Sent from my HTC6525LVW using xda app-developers app
berniemac2021 said:
Working good for me.
Sent from my HTC6525LVW using xda app-developers app
Click to expand...
Click to collapse
iHateWebOS said:
Using that combo right now........ I'll download again and double check
Edit: yup its all good, must got a bad download.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Interesting, thank you for the response. Just to be clear you are using his build version R4.4 (not the newest that was rebased)? I ended up with a frozen boot then the display split into colored lines before going black. I am well versed in compiling roms but was not sure if base is a factor for kernels.
Thanks
jschill31 said:
Interesting, thank you for the response. Just to be clear you are using his build version R4.4 (not the newest that was rebased)? I ended up with a frozen boot then the display split into colored lines before going black. I am well versed in compiling roms but was not sure if base is a factor for kernels.
Thanks
Click to expand...
Click to collapse
Using 5.2 now but I've been using his sense 6 rom sense release. It's what I've used for everything I've released so far. As long as its sense android version is 4.4.2 you should be good to go
Sent from my HTC6525LVW using Tapatalk
iHateWebOS said:
Using 5.2 now but I've been using his sense 6 rom sense release. It's what I've used for everything I've released so far. As long as its sense android version is 4.4.2 you should be good to go
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
OK must be a bad flash...I will re download and try again. I can't remember ever having a bad download. I was unsure if your newest posts was only designed to work with his current base.
Thanks
Update:
Re downloaded and checked md5...good download same results. Screen gets stuck at boot then multi-color lines before going to a grey blank screen. I have all the latest firmware and radios, not sure why the Faux enabled Sense kernel will not work for me.
Sent from my AT10-A using Tapatalk
jschill31 said:
OK must be a bad flash...I will re download and try again. I can't remember ever having a bad download. I was unsure if your newest posts was only designed to work with his current base.
Thanks
Update:
Re downloaded and checked md5...good download same results. Screen gets stuck at boot then multi-color lines before going to a grey blank screen. I have all the latest firmware and radios, not sure why the Faux enabled Sense kernel will not work for me.
Sent from my AT10-A using Tapatalk
Click to expand...
Click to collapse
Does the light version work for you?
Sent from my HTC6525LVW using Tapatalk
@iHateWebOS - is FFC enabled in these builds, like the ones you've given me in the beastmode thread? If I follow this thread and flash updates, is it the same kernel as those builds? Thanks!
They should be fine for Venom 3.5.0 right?
Related
h0tkernel - OC up to 1.92 Ghz!
Builds, support, and annoucements have moved to Github.
Flashable versions available on Github.
Supporting and distributing software on a forum like this is just plain maddening. If you have a problem, please create an issue on github.
--- Remainder of OP kept for historical purposes ---
Features:
Overclock up to 1.9 GHz
Voltage control (over/under volt)
Kernel shared memory pages (KSM)
NTFS enabled
BLN support
Default ONDEMAND governor
Works with any Note ICS rom
Download link removed
Questions? Read This First!
Changes
Code:
7/15: r2
Touch lights always on, fixed.
Added a slew of governors: pegasusq, lulzactive, fantasy, smartassv2, hotplug
Added io schedulers: sio, vr
7/15: r1b
Enabled MTP
7/14: r1a
Cranked out updater that should work with ANY ICS rom.
No more messing with mount points or other stuff.
7/13: r1
Janky release for everyone to salivate over.
Use the source luke!
FAQ
roloracer said:
Is the r1a not up yet? Or is the zip still called r1? I've checked goo.im and in the op link and is r1!
Click to expand...
Click to collapse
r1 is r1a. I just copied r1.zip to r1a.zip. Sorry for the confusion.
What is KSM?
Click to expand...
Click to collapse
Kernel Samepage Merging. In layman's terms it combines duplicate chunks of memory freeing up space for even more stuff to be loaded in RAM. To try it out, open a terminal and run:
Code:
echo 1 > /sys/kernel/mm/ksm/run
After some time the kernel will check memory pages that have been marked as merge-able and do it's thing. See /sys/kernel/mm/ksm/pages_* files for stats.
docfreed said:
I do not see any voltage control on h0tw1r3 10.1 ROM. Do we (or can we) flash this OC kernel over h0tw1r3 10.1 ROM and does the r1a have built-in undervolting or do we have to use external app?
Click to expand...
Click to collapse
Voltage control is not (currently) in CM9. I will be "working on it soon"(tm), in the meantime try one of these 3rd party apps: Antutu CPU Master, SetCPU
MarlowXim said:
BLN works on stock, you'll need a modified liblights.so located here http://www.multiupload.nl/OLYNDF7TLK push to /systsm/lib/hw/
set correct permissions and reboot and bln should be working.
Click to expand...
Click to collapse
This necessary for stock, and possibly some AOSP roms. I will be including a fixed liblights in the next update.
To take advantage of BLN, you'll need to install an app (unless you're on my CM9, it's built-in - Settings->Advanced->Sensors).
BLN control - Free
Apo11on said:
great job, sir! long awaited and much needed. is there any chance you could throw in some nice CPU governors like SmartassV2, InteractiveX and add BFQ IO scheduler from this list ?
Click to expand...
Click to collapse
Coming soon.
omniphil said:
My overclock settings don't stick after the screen goes off. Using set cpu. I'm assuming because the rom (Flappjaxxx UCLF6) has it own setting for cpu so when the phone goes to sleep it gets over ridden. Not sure I can turn those off in the rom.
Click to expand...
Click to collapse
Sounds like FJ_mod is not reading the settings directly from the kernel, but instead always using values internal to FJ_mod which end up blowing away your settings on wakeup . I'm sure he will update FJ_mod soon to fix the issue.
h3r3tic said:
OK so i think I figured it out. For those on fjs roms. You have to disable andrev oc so it disables the CPU profiles set in fj-tools. I did this by using rom toolbox. Go into root explorer and browse to system/xbin and find the andrev oc file and rename it to andrev oc.bak then set a CPU profile with which ever app you are using and reboot. I'm using system tuner to both overclock and undervolt. This is working for me so far. You can check by going into settings ans clicking on CPU tweak. If it force closes then its disabled. I was checking logcats and it is no longer changing the CPU back to default settings on screen lock. Flap feel free to chime in if this is gonna break something else. Other wise no issues yet.
Click to expand...
Click to collapse
Thanks for sharing the work-around to FJ's roms!
blackendsoul said:
Working perfect after update. Only issue as people are mentioning is cpu setting does not stick on reboot.
Click to expand...
Click to collapse
This is a kernel update only. You will need a 3rd party app to manage the settings and make sure it has the option to "apply settings on reboot".
h0tw1r3 said:
Will post another version for stock roms soon.
Click to expand...
Click to collapse
I can test on FJ_Mod's uclf6 if you need me to!
Awesome!!! Thanks Hotwire!!!!:cyclops:
Thnx man really awesome work.
:thumbup: very nice.
I'm on Team Perfection ICS Objection and might end up being a guinea pig for that group. My trigger finger is itchy..lol
Thanks h0tw1r3. :good:
Simply amazing! Great work!
Sent from my SAMSUNG-SGH-I717 using xda premium
Can't wait for the stock rom version
Sent from my SAMSUNG-SGH-I717 using xda premium
I thought I would be waiting weeks for a dev to release an ICS OC kernel. Thanks for the quick and wonderful work!!
Sent from my SAMSUNG-SGH-I717 using xda premium
For those wanting a stock version it will be later tonight. My sons birthday takes priority
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Great job
Will this kernel work okay with fj's aosp 0.7a?
ElAguila said:
Will this kernel work okay with fj's aosp 0.7a?
Click to expand...
Click to collapse
It should.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ElAguila said:
Will this kernel work okay with fj's aosp 0.7a?
Click to expand...
Click to collapse
Yes this kernel covers AOSP, AOKP AND CM9
Sent from my SAMSUNG-SGH-I717 using xda premium
I'm running king kang and all is good on this front.
Sent from my SAMSUNG-SGH-I717 using xda premium
nandroid in progress.
h0tw1r3 said:
For those wanting a stock version it will be later tonight. My sons birthday takes priority
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Glad to hear it! Sons birthday then stock over clock. Happy birthday.
Sent from my SAMSUNG-SGH-I717 using xda premium
Installed and working great so far. Thanks for the release!
Sent from my Galaxy Note!
I'm also on King Kong and at 1836 mhz. So far so good (about 5 mins)
Sent from my SAMSUNG-SGH-I717 using xda premium
Thread closed.
[Kernel][2013/FEB/10][GT-I9300][Samsung JB U7][3.0.62][Aroma] Yank555.lu kernel v3.1i
Thread closed..
Thread closed...
Thread closed.....
Rerserved...
Thread closed....
Yank555 said:
For those using TWRP Recovery, I've updated the installer (v1.5a) to make it compatible with TWRP.
It still works totally fine with CWM as well, so you can use your preferred recovery
If you already are on v1.5, no need to reflash, there's nothing new in the kernel / Aroma Menu.
JP.
Click to expand...
Click to collapse
You did it faster than I came back from gym! Great work mate
Still having an amazing time on DLJ2 so great
Enviado desde mi GT-I9300 usando Tapatalk 2
Just flashed...... very fast and smooth hope to get good battery life, will see what its like in a few days. Thank you for your great work bro :thumbup:
Sent from my GT-I9300
Yank555 said:
For those using TWRP Recovery, I've updated the installer (v1.5a) to make it compatible with TWRP.
It still works totally fine with CWM as well, so you can use your preferred recovery
If you already are on v1.5, no need to reflash, there's nothing new in the kernel / Aroma Menu.
JP.
Click to expand...
Click to collapse
I flash it and even the installation went OK when I go in About phone it shows the Kernel I used before flashing this one. Since I used Franco's kernel it still says that I am on that Kernel.
Is this only happen to me?
Ninolina said:
I flash it and even the installation went OK when I go in About phone it shows the Kernel I used before flashing this one. Since I used Franco's kernel it still says that I am on that Kernel.
Is this only happen to me?
Click to expand...
Click to collapse
Can you flash it again and save the logs (button in aroma after flashing) and post the logfile for me to have a look ?
JP.
Sent from my HTC Sensation Z710e using xda app-developers app
Edit : --------------------------------------------------
I just flashed a different kernel, checked, reflashed 1.5a again, worked fine...
You did chose to install all, not just config ?
JP.
Yank555 said:
Can you flash it again and save the logs (button in aroma after flashing) and post the logfile for me to have a look ?
JP.
Sent from my HTC Sensation Z710e using xda app-developers app
Click to expand...
Click to collapse
Sorry, sorry, sorry...
It was my mistake. And I saw that when tried to flash it again. At the end of installation I selected Flash script and not flash kernel and that was my mistake. Now I choose the right one and it's all OK.
Sorry for this... I will test it a few hours and give you my feedback.
Ninolina said:
Sorry, sorry, sorry...
It was my mistake. And I saw that when tried to flash it again. At the end of installation I selected Flash script and not flash kernel and that was my mistake. Now I choose the right one and it's all OK.
Sorry for this... I will test it a few hours and give you my feedback.
Click to expand...
Click to collapse
Lol Ninolina just a guess but I think you don't have to sorry for anything! We are all learning in here Maybe from this Yank could add a "(default)" on that option? or kinda to avoid mistakes¿
MuertoKo said:
Lol Ninolina just a guess but I think you don't have to sorry for anything! We are all learning in here Maybe from this Yank could add a "(default)" on that option? or kinda to avoid mistakes¿
Click to expand...
Click to collapse
Yep, might try to change the labels to make it clearer in the next version
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
MuertoKo said:
Lol Ninolina just a guess but I think you don't have to sorry for anything! We are all learning in here Maybe from this Yank could add a "(default)" on that option? or kinda to avoid mistakes¿
Click to expand...
Click to collapse
Well, you may be right, but I just hate if I report something is wrong and than see it was my mistake and I false alarm it. It usually don't happen to me.
Btw yank, before sleep time, what you think about the readahead buffers some lower by default? I had some handups when multitasking hard and using 3Mb, on 512Kb still no related issue for now Even the "benefits" are hard to detect (even they are there I swear!) the "hickups" are easily detected
You could try yourself by switching to maybe even higher lvl's if you hadn't done it already. What you think on putting them a little bit down for the common user who has no clue on how this works?
PS: Multitasking meaning using internet or whatsapp while downloading some huge item like a film, where you have the SD card burning
MuertoKo said:
Btw yank, before sleep time, what you think about the readahead buffers some lower by default? I had some handups when multitasking hard and using 3Mb, on 512Kb still no related issue for now Even the "benefits" are hard to detect (even they are there I swear!) the "hickups" are easily detected
You could try yourself by switching to maybe even higher lvl's if you hadn't done it already. What you think on putting them a little bit down for the common user who has no clue on how this works?
PS: Multitasking meaning using internet or whatsapp while downloading some huge item like a film, where you have the SD card burning
Click to expand...
Click to collapse
Can do. I used to have them at 2Mb, upped them to 3Mb on the Sammy. Might be a bit too much ... if you do sequential reads it should help, but if it's random access it sure will generate unnecessary overhead.
What value works best for you ? 512 ? Have you tested 1024 ?
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
Yank555 said:
Can do. I used to have them at 2Mb, upped them to 3Mb on the Sammy. Might be a bit too much ... if you do sequential reads it should help, but if it's random access it sure will generate unnecessary overhead.
What value works best for you ? 512 ? Have you tested 1024 ?
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
Click to expand...
Click to collapse
Nt yet, initially I tested 256 and all went good, now up to 512 for some days, may go up to 1Mb if u wish
Any ideas on how to test the "good" situation to use it (for benefits) and the "bad" (for the "hickups")? You know way better than me how this works P And even if it's nearly unnoticeable all learnt is welcome
MuertoKo said:
Nt yet, initially I tested 256 and all went good, now up to 512 for some days, may go up to 1Mb if u wish
Any ideas on how to test the "good" situation to use it (for benefits) and the "bad" (for the "hickups")? You know way better than me how this works P And even if it's nearly unnoticeable all learnt is welcome
Click to expand...
Click to collapse
Well using a big readahead buffer on random reads (reading randomly accross inside of a file) should be bad, as you will have the system read let's say 4Mb ahead of what you asked for...
On the other hand reading a full file, e.g. copying it or watching a video ... should be better with a big buffer.
So the trick is to find the right balance...
JP.
Sent from my custom ARHD 11.0.0 / Yank555.lu JB kernel v1.5a Aroma (Linux 3.0.38) powered Samsung Galaxy S3 using xda premium
great work but can any one please give us screenshots for battery usage and time screen on to judge??
Looking great man!
I'm reaaaaaally tempted to try this but i'll miss two features from perseus...
Gpu oc/uv and the "voodoo" port...
both should be kinda easy to import to this kernel i think...
It's not a request,don't get me wrong.It's more like a suggestion.
Anyway.Thank you very much for contributing here on xda and specifically on the S3 forums!
It always feels good to see a great "new" kernel/rom making it's way here!
I wish you the best mate...
sense kernel based on official 4.4.2 sources
THIS KERNEL WILL NOT WORK WITH AOSP BASED ROMS.
GPE AND SENSE BASED ROMS ONLY.
This project is brought to you from,
The combined efforts of myself, and .torrented. Make sure ya thanks us BOTH
============
Downloads:
============
Current full featured release:
6/30/14:
http://www.androidfilehost.com/?fid=23501681358555735
Current stock+ version:
7/15/14:
http://www.androidfilehost.com/?fid=23578570567713174
Older versions:
.torrented folder
iHateWebOS folder
============
features:
============
.Motion Launch Gestures
.Custom ondemand governor(flar's ElementalX)
.intelliactive, and preservative governors
.bfq, fiops, row, and sio I/O schedulers
.Built with linaro gcc4.9.1 toolchain
.various sound enhancements
.entropy tweaks
.Gamma Control(with FauxClock app)
.FauxSound driver
.DriveDroid compatibility
.Exfat support
.F2fs support
.Cmdline kHz frequency control
.Force Fast Charge
.Frontswap
.Sweep2Wake
.DoubleTap2Wake
.Overclock(max-1728000)
.Underclock(min-162000)
.Voltage control
=======info=============
Frequencies set by Aroma installer are hardcoded, and can not be changed unless you re-flash the kernel.
To use the MotionLaunchGestures you must install xposed framework. use sense six toolbox or other gesture module to set the desired gestures. Make sure to soft reboot the phone once you're done.
When setting up your wake gestures please note that logo=home button. Since we don't have the logo area, gestures uses the home button instead. I have mine set to long press home for flashlight.
Stock+ version is a lighter cleaner version of the kernel for non-power users that won't Overclock or undervolt the CPU.
=======================
Check my git repo for source.
special thanks go to all the kernelizers that contribute to the linux kernel.
i try my best to keep my commits authored properly so as to give credit to everyone that contributes.
XDA:DevDB Information
iHate Sense, Kernel for the HTC Droid DNA
Contributors
iHateWebOS, .torrented
Kernel Special Features: OC/UC,UV,S2W/S,DT2W,FFC,
Version Information
Status: Stable
Created 2014-04-28
Last Updated 2014-05-21
I'm having the same touchscreen sensitivity issue reported by myself and two other users so far on the 4.4.2 kernel in Santod's thread:
pyroguysf said:
What happened to touch sensitivity? I have to smash the screen to get it to register any touch and half the time it still doesn't even respond, so this is completely unusable for me. I've tried the stock ROM [Santod] posted with it's included kernel, and I've tried all 3 posted versions of NuKernel on the stock ROM, NuSense, and UnSense with the same results, all clean flashes. Any other kernel + ROM works perfectly fine (Sense or AOSP).
Something's definitely screwed up in the kernel, but since you've kept it stock that means it's probably a bug directly from HTC? I really don't want to go all the way back to S-On/locked to be completely sure though. Any ideas, or anyone else experiencing this?
Click to expand...
Click to collapse
Been waiting for this update for months, and it's broken to the point of unusable Going to try HTC support now, but thought I'd mention it.
Just strange that it doesn't affect me at all. Bad to the point of being unusable? Works fine for me.....
Sent from my HTC6525LVW using Tapatalk
Thanks for the Kernel! I just installed on Stock 4.4.2 after wipe dalvik.
Zero issues here work fine.:good: question how to enable DoubleTap2Wake.
I installed trickster Mod but I cant find it.
finanandroid said:
Thanks for the Kernel! I just installed on Stock 4.4.2 after wipe dalvik.
Zero issues here work fine.:good: question how to enable DoubleTap2Wake.
I installed trickster Mod but I cant find it.
Click to expand...
Click to collapse
Screen wake control
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC6525LVW using Tapatalk
iHateWebOS said:
Screen wake control
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Thanks yeah! I installed the Play store version and is no there in Specific
probably need the donate version. Ill search for it
Wrong upload then sorry, I'll upload the right version now. Damn drag n drop!
Sent from my HTC6525LVW using Tapatalk
finanandroid said:
Thanks yeah! I installed the Play store version and is no there in Specific
probably need the donate version. Ill search for it
Click to expand...
Click to collapse
I do believe its the donate version that has it
@iHateWebOS if you are the beast mode s2w files you should be able to use my aroma installer build tools from my git unless you already are
Naw it was the wrong upload, link in OP now points to correct download. I'm using anykernel right now, but I'm about to switch to your build tools for my next update.
I'll put link here to for the lazy ones.
http://www.androidfilehost.com/?fid=23329332407589895
Sent from my HTC6525LVW using Tapatalk
pyroguysf said:
I'm having the same touchscreen sensitivity issue reported by myself and two other users so far on the 4.4.2 kernel in Santod's thread:
Been waiting for this update for months, and it's broken to the point of unusable Going to try HTC support now, but thought I'd mention it.
Click to expand...
Click to collapse
Due to my upload mistake i learned something about your issue. The kernel you flashed was a test kernel that contained only two changes. Over clock and voltage control. Neither of those changes would affect touch sensitivity, so in essence you flashed the stock kernel as it was released by HTC. I even used the same toolchain they used to compile. Your Problems are either a stock behavior, or hardware failure.
Sent from my HTC6525LVW using Tapatalk
I tried flashing this twice on unsense six and I got bootloops both times on the white HTC quietly brilliant screen. It didn't even make it to the boot animation. Before that I was ruining the new nukernel. Both times I was using fresh downloads of dna-ihate-428, both md5 checked. I would love to help but can I even pull a last kmesg when it bootloops that early?
Sent from my HTC6525LVW using Tapatalk
amathophobia said:
I tried flashing this twice on unsense six and I got bootloops both times on the white HTC quietly brilliant screen. It didn't even make it to the boot animation. Before that I was ruining the new nukernel. Both times I was using fresh downloads of dna-ihate-428, both md5 checked. I would love to help but can I even pull a last kmesg when it bootloops that early?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
That's strange I just downloaded from the link in the OP and flashed this to santod sense six ROM and didn't bootloop
Edit: maybe your phone doesn't like the OC I'll make a revision so it boots at 1512 instead if 1728. Most phones should have no problems with a small OC like this. Maybe your slow binned?
Sent from my HTC6525LVW using Tapatalk
@iHateWebOS I have experienced the touchscreen sensitivity issue, mainly with the buttons, and I think I have managed to work around it. Seems better to me at least. If you don't mind you can cherry-pick these commits:
https://github.com/jamiethemorris/sense-dna-kernel/commit/454387589bc32c68567661a8ee2ed433940b62db
https://github.com/jamiethemorris/sense-dna-kernel/commit/04e13fcad797f1081a24893a0332a32094131cf9
https://github.com/jamiethemorris/sense-dna-kernel/commit/4921738b8ff42b2d5f4da74ba4e6894148cbb905
iHateWebOS said:
That's strange I just downloaded from the link in the OP and flashed this to santod sense six ROM and didn't bootloop
Edit: maybe your phone doesn't like the OC I'll make a revision so it boots at 1512 instead if 1728. Most phones should have no problems with a small OC like this. Maybe your slow binned?
Click to expand...
Click to collapse
I am slow binned.
Sent from my HTC6525LVW using Tapatalk
amathophobia said:
I am slow binned.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
[emoji24], I'll try n take care of that for you. I'm fast binned(majority are) so during my testing no issues came up
Sent from my HTC6525LVW using Tapatalk
jamiethemorris said:
@iHateWebOS I have experienced the touchscreen sensitivity issue, mainly with the buttons, and I think I have managed to work around it. Seems better to me at least. If you don't mind you can cherry-pick these commits:
https://github.com/jamiethemorris/sense-dna-kernel/commit/454387589bc32c68567661a8ee2ed433940b62db
https://github.com/jamiethemorris/sense-dna-kernel/commit/04e13fcad797f1081a24893a0332a32094131cf9
https://github.com/jamiethemorris/sense-dna-kernel/commit/4921738b8ff42b2d5f4da74ba4e6894148cbb905
Click to expand...
Click to collapse
I'll give this a test as well if you're willing to share a zip.
iHateWebOS said:
[emoji24], I'll try n take care of that for you. I'm fast binned(majority are) so during my testing no issues came up
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Binned fast and all is fine on my DNA. Thank you!
Bummed about Zarboz; twas totally looking forward to you, .torrented and Z to get the new m8 rocking beastmode. Like not the phone needs it, but what the hay.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
jamiethemorris said:
@iHateWebOS I have experienced the touchscreen sensitivity issue, mainly with the buttons, and I think I have managed to work around it. Seems better to me at least. If you don't mind you can cherry-pick these commits:
https://github.com/jamiethemorris/sense-dna-kernel/commit/454387589bc32c68567661a8ee2ed433940b62db
https://github.com/jamiethemorris/sense-dna-kernel/commit/04e13fcad797f1081a24893a0332a32094131cf9
https://github.com/jamiethemorris/sense-dna-kernel/commit/4921738b8ff42b2d5f4da74ba4e6894148cbb905
Click to expand...
Click to collapse
I'll pick that in the am tomorrow, I seen those a while back, but it's kind of a dirty hack and wasn't really needed sense sensitivity was fine on ported kernel. Still really strange that my sensitivity seems un changed by the new source. I'm trying to dig to find what changes HTC could have made to cause this and I'm coming up with nothing.
Sent from my HTC6525LVW using Tapatalk
iHateWebOS said:
I'll pick that in the am tomorrow, I seen those a while back, but it's kind of a dirty hack and wasn't really needed sense sensitivity was fine on ported kernel. Still really strange that my sensitivity seems un changed by the new source. I'm trying to dig to find what changes HTC could have made to cause this and I'm coming up with nothing.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Yeah, I agree it's definitely a hack. I don't know what's different either... Synsptics_3200.c seems largely unchanged.
Sent from my Droid DNA using Tapatalk
Could something in the kernel cause the hardware for the proximity/light sensor to fail? I know my sensor is broken but I'm just wondering if it was when I changed my screen or if something in the kernel itself broke something hardware related in my phone cause it's almost like it's reversed or something now. I am awaiting a new flex cable so hopefully that should fix it I'm just curious if that's possible
sent from my DNA
LUNAR MAX KERNEL
Welcome to Lunar Max Kernel! This kernel is for Sense ROM's and built using the android 4.4.2 source code (VZW). This should work on all carriers. As I do not have the device, I am building these and having them tested before release. If there are problems, please let me know and I shall do my best to fix..although tough without the device for myself.
Instructions: Flash in recovery. These kernels are in anykernel format (i.e. - not a boot image), they unpack your current boot.img and repack the ramdisk with the kernel. The insecure boot.img has been removed due to too much confusion; if you find yourself needing one...give me a shout.
Enjoy!
Features: (more to come)
CPU
Overclocking
Underclocking
Voltage Table
Smartmax Governor
OnDemand Graphics Boost
GPU
Overclocking
Slimbus - OC
IO-Schedulers
SIO
Zen
FIOPS
VR
Faux Sound Control
Force Fast Charge
exfat support
Thermal Control - by crpalmer
frandom
fsync control
NEON support
Linaro 4.9.1 a15 cortex toolchain
Download:
Lunar_Max_Kernel-06_02_2014
Old Downloads
Lunar_Max_Kernel-06_01_2014
Lunar_Max_Kernel-05_26_2014
Lunar_Max_Kernel-05_25_2014-NEW
Thanks:
@Flyhalf205 - for collaborating
@IAmTheOneTheyCallNeo - for testing
Source:
https://github.com/brymaster5000/Lunar_Max
XDA:DevDB Information
Lunar Max Kernel, Kernel for the HTC One Max
Contributors
brymaster5000, Buckmarble
Kernel Special Features: OC/UC, Voltage, Thermal Control, CPU Governors, IO Schedulers
Version Information
Status: Stable
Created 2014-05-25
Last Updated 2014-06-03
Changelog:
6/2 - LOADS more performance/memory tweaks, NEON support, fsync control, switched to Linaro-4.9.1 arm-cortex a15 toolchain
6/1(NEW) - more performance tweaks, Wi-Fi is broke
6/1 - Reverted back to GCC 4.8 toolchain, same performance tweaks (minus two that broke wifi), Wi-Fi works
5/30 - switched to Linaro-4.9.1 arm-cortex a15 toolchain, added some performance tweaks - bootloops
5/26 - Added frandom, fixed OC maxing out at 1.7, some performance tweaks, switched to GCC 4.8 toolchain from 4.7
5/25 - Attemtp to fix WiFi for all carriers...
5/24 - Initial Release
Downloaded. Installed.
Successfully booted up.
Testing on my international max
My deepest thanks and praises to you devs for making my int one max rocks! Keep up the good work!
Will give feedback a few hours later.
Edit:
1. Unable to turn ON Wifi
2. Max cpu still 1.7ghz while uc nicely sit at 162mhz
3. Using smartmax governor. Battery life seems improve
So far so good. Will wait for the wifi fix.
Sent from my HTC One max using XDA Premium 4 mobile app
mafyas said:
Downloaded. Installed.
Successfully booted up.
Testing on my international max
My deepest thanks and praises to you devs for making my int one max rocks! Keep up the good work!
Will give feedback a few hours later.
Edit:
1. Unable to turn ON Wifi
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Same problem. Running stock rooted sprint sense 6
Same on NuSense
Sent from my HTC6600LVW using Tapatalk
Thanks for the feedback...my tester wasn't able to test last night. Any body else on Verizon who has tested is Wi-Fi working
Sent from my Lunar Ecliptic One.
brymaster5000 said:
Thanks for the feedback...my tester wasn't able to test last night. Any body else on Verizon who has tested is Wi-Fi working
Sent from my Lunar Ecliptic One.
Click to expand...
Click to collapse
is this kernel based on the latest kernel source for sense 6 ?
i see that htc released the latest source for sense 6 on htc dev
edit : i see that u built it from verizon source
so why not built it from the latest sources to fix all problems
any way thanks for ur great work
mido.fayad said:
is this kernel based on the latest kernel source for sense 6 ?
i see that htc released the latest source for sense 6 on htc dev
edit : i see that u built it from verizon source
so why not built it from the latest sources to fix all problems
any way thanks for ur great work
Click to expand...
Click to collapse
Was not aware of the source release for sense6. The Wi-Fi issue however will be fixed shortly. Flyhalf has checked in and says it works on vzw, so I will use his work around to enable it on all carriers.
I will patch in the source when I get some time.
Sent from my Lunar Ecliptic One.
View attachment 2762733
mafyas said:
Downloaded. Installed.
Successfully booted up.
Testing on my international max
My deepest thanks and praises to you devs for making my int one max rocks! Keep up the good work!
Will give feedback a few hours later.
Edit:
1. Unable to turn ON Wifi
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
WiFi work for me on my international max
but still 1.728ghz, cpu have no oc setting
Sleepwake better than flykernel 2.1 for I use
ricky886 said:
View attachment 2762733
WiFi work for me on my international max
but still 1.728ghz, cpu have no oc setting
Sleepwake better than flykernel 2.1 for I use
Click to expand...
Click to collapse
Try an app, like trickster, to control cpu frequencies and other goodies. Oc is there.
Sent from my Lunar Ecliptic One.
Deleted
Sent from my HTC6600LVW using XDA Premium 4 mobile app
On VZW running ViperROM 2.0 <4.4.2> sense 5.5
Will this kernel work for me? Trying to decide on which kernel to use, considering there's only 2 custom kernels to pick from.
Sent from my HTC6600LVW using XDA Premium 4 mobile app
---------- Post added at 04:27 PM ---------- Previous post was at 04:24 PM ----------
I'm getting ready to flash Lunar, I'll report back
Sent from my HTC6600LVW using XDA Premium 4 mobile app
---------- Post added at 04:35 PM ---------- Previous post was at 04:27 PM ----------
Is this for sense 6 only
Sent from my HTC6600LVW using XDA Premium 4 mobile app
---------- Post added at 04:44 PM ---------- Previous post was at 04:35 PM ----------
WiFi doesn't work for me. ViperROM 2.0 --4.4.2 sense 5.5
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Updated OP with NEW version of today's kernel. My testers are not able to verify this one, but this (if everything works) should enable wifi for all carriers.:fingers-crossed: It's the same version - no added features, just the attempt to fix wifi for all. Let me know how it goes and thanks for being patient.
brymaster5000 said:
Updated OP with NEW version of today's kernel. My testers are not able to verify this one, but this (if everything works) should enable wifi for all carriers.:fingers-crossed: It's the same version - no added features, just the attempt to fix wifi for all. Let me know how it goes and thanks for being patient.
Click to expand...
Click to collapse
Seriously have no idea what I may be doing wrong. Running ViperMax 2.0.0 android version 4.4.2 with standard insecure boot image. Any insight? Flashed insecure boot, booted into android, rebooted to recovery, flashed newest Lunar, booted to android and begins to loop.
brymaster5000 said:
Updated OP with NEW version of today's kernel. My testers are not able to verify this one, but this (if everything works) should enable wifi for all carriers.:fingers-crossed: It's the same version - no added features, just the attempt to fix wifi for all. Let me know how it goes and thanks for being patient.
Click to expand...
Click to collapse
I'm on Scotty cleanrom 2.0 so flashed your insecure boot with units support and lost all my paid apps. Luckily I made a backup right before. I'm already this far so will install your kernel to test out what I can but will need to go back if I can't get the paid part worked out.
It may have caused me a little inconvenience but I do thank you for this and hope it all works out going forward.
xhunter187 said:
Seriously have no idea what I may be doing wrong. Running ViperMax 2.0.0 android version 4.4.2 with standard insecure boot image. Any insight? Flashed insecure boot, booted into android, rebooted to recovery, flashed newest Lunar, booted to android and begins to loop.
Click to expand...
Click to collapse
Just thought I would chime in. I'm also on vipermax 2.0 vzw- I flashed the lunar. All I done was flash the kernel and only problem I had was WiFi would not connect, no bootloops or any other problems.
Sent from my HTC6600LVW using XDA Premium 4 mobile app
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
brymaster5000 said:
Thanks for the feedback...my tester wasn't able to test last night. Any body else on Verizon who has tested is Wi-Fi working
Sent from my Lunar Ecliptic One.
Click to expand...
Click to collapse
EDITED
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Wifi working with the new one. I'm on Sprint stock rooted Sense 6 rom. Will playing with it now and report later.
Deleted
Sent from my HTC6600LVW using XDA Premium 4 mobile app
brymaster5000 said:
Updated OP with NEW version of today's kernel. My testers are not able to verify this one, but this (if everything works) should enable wifi for all carriers.:fingers-crossed: It's the same version - no added features, just the attempt to fix wifi for all. Let me know how it goes and thanks for being patient.
Click to expand...
Click to collapse
Jiggity Janx said:
I'm on Scotty cleanrom 2.0 so flashed your insecure boot with units support and lost all my paid apps. Luckily I made a backup right before. I'm already this far so will install your kernel to test out what I can but will need to go back if I can't get the paid part worked out.
It may have caused me a little inconvenience but I do thank you for this and hope it all works out going forward.
Click to expand...
Click to collapse
Wifi is working on the new one. My paid apps returned from the insecure flash to the newest one. However I do have some pretty intense lag in most apps, adw launcher swiping, and even keyboard that wasnt there in the latest flykernel or insecure boot. Its like half second at the very first touch then it catches up with what Im doing.
GOOD!
EDIT
Just flashed the untested Lunar Kernel download. I'm on Verizon running viper2.0 sense 5.5. I can confirm WiFi is working.
I'm getting ready to flash the 1st download link the untested version I'll report
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Well i am apparently bad at reading rules
Thread closed.
mine
ChangeLog
build 4/12/16
Initial device bring up
removed some fm radio files from cm
removed stock lwp
removed cm reporting
removed cm ota
introduced latest ubertc
removed inline kernel and apps below (some people didnt want )
future features XD (when i have time :
enable disable navbar from settings--->buttons
status bar network meter
The apps I like to use /mods i do to stock are as follows:
Busybox : https://play.google.com/store/apps/d....busybox&hl=en
Adaway: http://adaway.org
Kernel auditor: https://play.google.com/store/apps/d...ladiutor&hl=en
LMT (pie launcher) :http://forum.xda-developers.com/show....php?t=1330150
liveboot (verbose boot):https://play.google.com/store/apps/d...liveboot&hl=en
People keep asking me how to get my custom pie launcher and what my theme is
I simply just disabled my nav bar by adding "qemu.hw.mainkeys=1 "
to my build.prop you can use this app
im using this theme for black and red and matched the colors in the settings of LMT and positioned pie to launch from the bottom
any questions just let me know and please try to provide a logcat! Thanks for testing :highfive:
Looks cool
Sent from my Nexus 6P using XDA-Developers mobile app
Do we need to flash elite kernel or can we use a different custom kernel?
Sent from my Nexus 6P using Tapatalk
bluerez79 said:
Do we need to flash elite kernel or can we use a different custom kernel?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
you can use what ever kernel you like elite is just my reccomendation because its comes preconfigured
i just may not be able to support it
Any recommended kernel settings?
Sent from my Nexus 6P using XDA-Developers mobile app
OmegaBlaze said:
Any recommended kernel settings?
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
The elite kernel team pre-configures their kernel
cool feature of it tho is you can enable grey-scale mode in kernel auditor and it makes your battery life insane (because your screen is only black and white) kinda like the Samsung super battery saver on the galaxy series i just set a tasker profile that changes kernel auditor and some system settings
@Dreamlogix
I've cleaned installed it and my SIM can't be detected :/
Hmm I'll have to take a look when I'm home anyone else having same issue?
Dreamlogix said:
The elite kernel team pre-configures their kernel
cool feature of it tho is you can enable grey-scale mode in kernel auditor and it makes your battery life insane (because your screen is only black and white) kinda like the Samsung super battery saver on the galaxy series i just set a tasker profile that changes kernel auditor and some system settings
Click to expand...
Click to collapse
True! I was asking because I find it kind of odd that you have a linaro kernel on a uber build ROM. About to flash now & check it out?
Sent from my Nexus 6P using XDA-Developers mobile app
primo14z said:
@Dreamlogix
I've cleaned installed it and my SIM can't be detected :/
Click to expand...
Click to collapse
I've had this happen on several different ROMs lately. Normally, it will get detected after a few minutes.
Otherwise, popping the SIM out and putting it back in has solved it for me.
OmegaBlaze said:
True! I was asking because I find it kind of odd that you have a linaro kernel on a uber build ROM. About to flash now & check it out?
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
haha ya i always wanted to do a hybrid thing
Slapyou said:
I've had this happen on several different ROMs lately. Normally, it will get detected after a few minutes.
Otherwise, popping the SIM out and putting it back in has solved it for me.
Click to expand...
Click to collapse
i just flashed it on mine and had the same problem is probably my ril ill have a update tonight
Welcome :good::good::good::good::good::laugh:
This thread is closed at OP's request.