Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.
Hi, hoping you guys can help me out....
I have just picked up a s2 on 3 network. It is running Gingerbread. I checked for any updates but it says it's up to date...
So I thought I'd root it and install custom rom.
I followed this guide to root it: http://www.youtube.com/watch?v=ibj_DWt1Yeo
All seemed to go fine, phone started to reboot and I got the screen with the yellow triangle like it showed in his video but then it just stays at a black screen.
I can go into download mode and into ClockworkMod mode.
Any ideas why it's not rebooting properly??
I was just going to try and install a custom rom through CWM but thought I'd better ask before I try in case I brick it completely!.
I have been onto samobile to see if I can download the stick firmware that was on it but nothing is showing up for 3 network...
I have rooted and changed the rom on my Galaxy Tab 8.9 hundreds of times, and have rooted my Note 10.1 without any trouble. But think I must be doing something wrong......
Nothing wrong in what you've done here as far as i know.. Maybe try pulling the battery out and see..
And yes u can install a custom rom.. But u need to be sure that emmc brick bug is not there..
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check&hl=en
Use this app to find out..
and why not try a genreic JB since you are on GB rather than custom roms?
Hi guys so the missus didnt know not to update the galaxy s3. It was running the revolution hd 4.0.4 rom.
After she updated it the phone would not boot. Stuck in boot loop. So thought right ok reflash. Tried and nothing. Boot loop. Downloading the original three rom (i think its the three rom. Downloading the unbranded one just now just incase )
Done a data wipe, cache wipe, fired into dl mode, opened odin, pda picked the rom, phone flashed and passed. Now turns on which is great. But no signal with any sim card, imei is null/null and the baseband is unknown. Tried to root the phone and still no signal.
Relashed the modem with a few others, nothing.
Im at a loss, im not so good at flashing eveything, i can do basics, but if someone could point me in the right direction for a noob to regain signal and use of y phone it would be greatly apreciated
small update i flashed the international rom and nothing at all no signal
It sounds to me like your efs partition is corrupt, if you have a backup restore that, if not you will have to go to service.
no backup mate, i found this video tho, shows how to put imei back, think it could work ?
http://www.youtube.com/watch?v=_AlQmfMJBK0
well couldnt fix it three sent it away for repaior so we will see if im charged in 10 days
Hey y'all.
So many threads ago I posted up on how to root a SGS2 I900P, which in the end I did no problems. The ONLY problem I encounted where I'd flash a different ROM and wanted to restore back to my factory loaded Orange UK rom, which when I restored it with no problems it just went through the 'boot loop' phase. I read up that this is caused due to a faulty emmc 'bricking bug' and luckily it was only "soft bricked".
Cut the long story short I managed to re-flash the Orange (UK) carrier firmware (after many USB cable changes and port swaps and fails) via Odin and retain my previously installed apps and so on and had to re-root. Is there a method or some sort of fix for the emmc bug issue for future wipes/restores ?
Something new I learnt in all that process too,
muffintastic said:
Hey y'all.
So many threads ago I posted up on how to root a SGS2 I900P, which in the end I did no problems. The ONLY problem I encounted where I'd flash a different ROM and wanted to restore back to my factory loaded Orange UK rom, which when I restored it with no problems it just went through the 'boot loop' phase. I read up that this is caused due to a faulty emmc 'bricking bug' and luckily it was only "soft bricked".
Cut the long story short I managed to re-flash the Orange (UK) carrier firmware (after many USB cable changes and port swaps and fails) via Odin and retain my previously installed apps and so on and had to re-root. Is there a method or some sort of fix for the emmc bug issue for future wipes/restores ?
Something new I learnt in all that process too,
Click to expand...
Click to collapse
To avoid brickbug is by flashing JB 4.1.2. (good alternative!)
But if you really like ICS then i suggest you move back to 4.0.3. There is no avoiding brickbug on 4.0.4.
If you have rooted it, you can check with 'Brickbug check' app on google play, to see if you have sane (or insane) chip (brickbug or not), cause most custom kernels and roms have found a solution to this bug, and use it on their roms/kernels. Which means on those you can safely wipe and restore etc.. (but check brickbug app first on google play)
Yep. Don't wipe a rooted phone running 4.0.4. And if you're really paranoid, don't even wipe a non-rooted phone running 4.0.4 (Entropy mentioned at least one case he knew of where someone borked their phone doing a wipe on a phone running 4.0.4 via stock Android recovery, tho it seems to be very rare).
The TL;DR is don't run rooted stock 4.0.4 if you mess with your phone in any way.
I know that's not a fix, but that's because there isn't one. Some chips aren't susceptible to the bug; there's an app floating around here somewhere/Google Play where you can check which chip you have (seems to be more that are susceptible).
Your 1st paragraph is a load of crap.Bootloop has nothing to do with "brickbug".More like by you not running kernel cleaning script,or not factory resetting before/after flashing a new rom.
As mentioned by others,just dont have 4.0.4 running on your phone.So you are still left with over 100 custom/stock roms to choose from........lol
Was the backup of JB? Or ICS? OP doesn't say. If it was JB, I'd be willing to bet that the bootloop was due to an attempt to restore the stock rom, but without restoring preload.
Sent from a galaxy far, far away
Hopper8 said:
Was the backup of JB? Or ICS? OP doesn't say. If it was JB, I'd be willing to bet that the bootloop was due to an attempt to restore the stock rom, but without restoring preload.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Im not sure Hopper.I am leaning towards the restore would be "cancelled" due to not being complete,rather than it succeeding leading to bootloop.
But hes not said.
And he cant get "factory" rom with a restore as it didnt come with cwm lol.
Sorry to clear things up.. I updated it to 4.1.2 via Kies many months ago. I used PhilZ method to root, no problem. Few months down the line since then I put LiquidSmooth 2.4 (few days ago) then restored a backup from PhilZ recovery and put 4.1.2 and everything back on no problem. Then restarted the phone and it when into a boot loop of the Orange and Samsung logo.
I'm not stupid as I've rooted my own SGS3 and Samsung Galaxy ACEs etc, Just forgotten to put that info in lol and yes I always use the Factory Reset to install a new rom.
And yes when I managed to get it restored from this so called boot loop (by putting 4.1.2 Orange UK firmeware back on via Odin) the EMMC brick bug is present as i've checked via an app via Google Play. My overall goal is to eliminate this problem or temp fix so I can put different roms on and if I don't like them recovery back to the latest restore without issues.
Are we on the same line now ?
And as we've said, you can't eliminate the problem. You can avoid the problem by not running 4.0.4 stock roms. It's really quite simple, but like a lot of people here you're trying to make it complex when there's no need to.
help me out here please
MistahBungle said:
And as we've said, you can't eliminate the problem. You can avoid the problem by not running 4.0.4 stock roms. It's really quite simple, but like a lot of people here you're trying to make it complex when there's no need to.
Click to expand...
Click to collapse
ok its a long story so i better get started... my friend had his phone rooted and installed a jelly bean version of Paranoid android and he wanted to put kitkat on it, he downloaded the cm11 latest nightly and told me to flash it i proceed to flash the phone but it failed and showed me "error status 7" so the phone couldnt get neither into the previous pa nor in the cm11... after some research and messing with the META INF stuff to sol the status 7 thing i found out that the problem was that he wasnt using a kitkat compatible recovery... i installled it and finally got to flash cm11.. that didnt came out as you may thought the phone showed it had -15246384352 % of battery made a freking glitch when the sreen rotated and it wouldnt recognize either of the sd cards (internal memory or external sd card) so i couldnt flash it again, wipe data/cache wouldnt solve the problem either... i turn into our ol friend odin and flashed stock JB wich worked perfectly except that i had the same issue with the memories... used philz to root the phone again, the try to format /system /data /emmc to check if that was the problem annnnd ta da the phone wont boot :silly: odin keeps failing to flash stock again and i dont jknow what to do....
sorry for the long post but i guess that you might need alll the info you could get for helping me...
thanks a lot
andreshbozo said:
ok its a long story so i better get started... my friend had his phone rooted and installed a jelly bean version of Paranoid android and he wanted to put kitkat on it, he downloaded the cm11 latest nightly and told me to flash it i proceed to flash the phone but it failed and showed me "error status 7" so the phone couldnt get neither into the previous pa nor in the cm11... after some research and messing with the META INF stuff to sol the status 7 thing i found out that the problem was that he wasnt using a kitkat compatible recovery... i installled it and finally got to flash cm11.. that didnt came out as you may thought the phone showed it had -15246384352 % of battery made a freking glitch when the sreen rotated and it wouldnt recognize either of the sd cards (internal memory or external sd card) so i couldnt flash it again, wipe data/cache wouldnt solve the problem either... i turn into our ol friend odin and flashed stock JB wich worked perfectly except that i had the same issue with the memories... used philz to root the phone again, the try to format /system /data /emmc to check if that was the problem annnnd ta da the phone wont boot :silly: odin keeps failing to flash stock again and i dont jknow what to do....
sorry for the long post but i guess that you might need alll the info you could get for helping me...
thanks a lot
Click to expand...
Click to collapse
Here is my situation.
I had 4.1.2 JB. Installed CM11 M8 and CWM_6.0.4.7(coming previously from Siyah) at the end of July. In the beginning of October my phone just shut down. That happened before on the same and previous rom so I wasn't worried. I turned it on and phone was in bootloop. That was strange because the last time that happened I installed Chainfire. So bootloop without any cause..that was strange. I tried making a backup before flashing the ROM. But I got an error. I can't remember but I can dig it somewhere if you want it. I tried then flashing recovery(bad idea) and Odin again reported an error. When I restarted phone I noticed that my Recovery mode was gone. Just gone and with no solution on how to restore it. I tried numerous methods OMAP drivers, heimdall, .pit file method but nothing. So I brought my sgs2 to the store where I bought it and they concluded that it was bad eMMC chip.
Now, your problem reminds me of mine because Odin wouldn't want to flash anything without an error(well, not exactly anything, I managed to flash some partition using Heimdall but it was not sufficient) but it doesn't have to be.
What version of cwm were you using?
I'm having strange problems with an I9300 I'm trying to fix for friend. Now unfortunately I end up doing things like this not because I know anything about these things, but because I'm I'm slightly more computer literate than the rest of my group of friends, so I'll apologise now if these are stupid questions, I have searched but could find nothing.
Now last night my friend comes to mine with his phone stuck in a boot loop. Now beyond the fact it already had a custom ROM on it I can tell you nothing except he claims he installed AVG and it happened. So I reboot into Windows, start up Kies, and see what I can do. Which so far has been:
1) Try to perform an Upgrade and Initialisation. Jump through the hoops, end up with the message "This device's version cannot be updated."
2) Ok, that didn't work. Hit sammobile to find a stock rom and fire up Odin. Ohh success...
3) Oh noes, too soon. The Samsung chime cuts off early and it's stuck with a pulsating logo.
3) Ok well maybe a downgrade first? Get a 4.1 stock rom and try again. Odin sees no problems again, the chime plays fully. But nope, it's just a longer boot loop.
4) After much head scratching and just trying random stuff I end up finding CM9.1 will boot fully, but the EFS data is screwed. This is the only rom I've found so far that will boot.
So from where I started I'm closer and if the radio worked this would be fine. Now the only suggestion I've heard to get the radio working is flashing a stock rom through Kies but I have no idea how to get Kies to play along. Any ideas?
Thanks.
Your downgrade screwed the efs, flash 4.3 and pray it is still readable.
Your mistake was to not factory reset after the first Odin flash.
123c
boomboomer said:
Your downgrade screwed the efs, flash 4.3 and pray it is still readable.
Your mistake was to not factory reset after the first Odin flash.
Click to expand...
Click to collapse
I did actually try that before flashing 4.3 with Odin and after. Was still stuck in a boot loop... :/
Thanks