Related
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
While you're at bootloader, connect USB and then flash a stock RUU.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Thanks for the reply. Will i lose s-off with this?
Tones1971 said:
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
Click to expand...
Click to collapse
You didn't say what version of the Evo 3D you have (CDMA or GSM) or what bootloader is installed, but if it's a Sprint CDMA model I would recommend flashing the Sprint ICS RUU.exe from Windows after putting the phone into fastboot mode in the bootloader. You may have to relock the bootloader with the "fastboot oem lock" command first if it shows "***UNLOCKED***" at the top of the screen.
That will fix a lot of problems, especially when the phone is in an indeterminate state. After flashing the RUU you can HTC unlock, flash a custom recovery and then root the stock ROM or flash a rooted ROM.
ramjet73
Sorry it is a UK GSM (Europe). I have revolutionary bootloader installed. Got an RUU to try now thanks.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Tones1971 said:
Thanks for the reply. Will i lose s-off with this?
Click to expand...
Click to collapse
^^^^ He got it first with the short version.
No, you won't lose S-OFF and won't need to relock the bootloader first if that's your current status.
And if it's a GSM model everything still applies, you just need a different RUU, which you already have.
ramjet73
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Tones1971 said:
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Click to expand...
Click to collapse
Error 170 means that the RUU utility can't find the phone. There's a readme.doc for running the RUU here, and the error codes are towards the end of that.
Are you putting it into "fastboot" mode in the bootloader, which should change to "fastboot usb" when it is connected to a computer? You also need to have the HTC USB drivers active, which can be accomplished by installing HTC Sync.
ramjet73
Tones1971 said:
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Click to expand...
Click to collapse
adb push into a bootlooping phone?
do you have the drivers for the phone? (if not download and install HTC Sync as they come with it)
did you try flashing a custom recovery img through fastboot? (go to bootloader select fastboot, connect USB, type "fastboot flash recovery nameOfYourRecoveryImg.img")
Yeah have tried installing custom recovery through fast boot again, and im in fastboot ok when trying to run the RUU. Also have HTC Sync installed from when i had the phone.. Drivers seemed to be ok as i was able to install the custom recovery with adb, alhough i still got bootloop after that.
Ive a few other things to try when i get home from work. Im sure it shouldnt be too difficult to resolve. Hopefully anyway.
Well this isnt going smoothly at all. Used another PC and was able to get the RUU to run.
However it now comes up with Error 131 Customer ID problem. The RUU was for HTC Europe (non branded). The phone was sim free. When i posted months back my cid was HTC_001. I checked it here: http://forum.xda-developers.com/showpost.php?p=22394863&postcount=172
However now when i get my CID it is showing as CID0202. Any way i can get an RUU to install? Any idea how a CID could change?
EDIT: noticed i used a different command last time.
fastboot getvar cid shows CID0202
adb shell getprop ro.cid now shows device not found (previously showed CID_001)
Thats typing both commands in same window, one after the other. One gets CID0202, the other device not found???
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
dessolator666 said:
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
Click to expand...
Click to collapse
Thanks for this. Ill see if i can find anything else out about it. So saves running the RUU exe and no cid check done then?
Need to bump this as im not getting anywhere. No RUU's will install, error 31 customer error. Have flashed recovery via ADB and through PG86IMG.ZIP, but still cant get in to recovery as it just continually reboots.
S-OFF with revolutionary. Anybody any ideas please?
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Tones1971 said:
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Click to expand...
Click to collapse
You need to stop cross posting in the d3rp Q&A thread and your own thread if you want more help. Cross-posting is stongly discouraged on XDA and it's really confusing when you are asking for help in one thread while getting different advice in another.
It sounds to me like all the CID changes on your phone have left it in an indeterminate state and I'm not sure at this point what is the correct CID and RUU for your model. If you could detemine that, set the CID correctly and flash the right RUU the phone should work, but it might be too late if you have in fact been flashing firmware that doesn't match your phone because the right RUU may not back that out properly.
That's all I can offer at this point, but since I don't know the history of your phone and how it got the various CID's you have reported, you will probably be the one that needs to figure it out.
ramjet73
So just got the phone yesterday and I wanted to S-off immediately. Me being the idiot I am I fully rooted through fireballas method rather than temp-rooting and that messes up dirtyracun. So I need to flash the stock RUU again. I re-locked my phone and tried flashing the RUU and each time I get "FAILED (remote: 99 unknown fail)". Maybe I'm missing something here. How do I flash back to stock?
Are you following the instructions on the unlimited.io website? Because all you need to do is run the fastboot command and it should run just fine.
Sent from my ADR6410LVW using xda app-developers app
Ikikaea said:
So just got the phone yesterday and I wanted to S-off immediately. Me being the idiot I am I fully rooted through fireballas method rather than temp-rooting and that messes up dirtyracun. So I need to flash the stock RUU again. I re-locked my phone and tried flashing the RUU and each time I get "FAILED (remote: 99 unknown fail)". Maybe I'm missing something here. How do I flash back to stock?
Click to expand...
Click to collapse
after you get that error retype the command and it will go though. all part of the process
fastboot flash zip RUU.zip.
Aldo101t said:
after you get that error retype the command and it will go though. all part of the process
fastboot flash zip RUU.zip.
Click to expand...
Click to collapse
No matter how many times I try it won't flash. I figure it's the TWRP recovery or the root that's causing the problem. I must be missing something since I should be able to flash back to stock.
Ikikaea said:
No matter how many times I try it won't flash. I figure it's the TWRP recovery or the root that's causing the problem. I must be missing something since I should be able to flash back to stock.
Click to expand...
Click to collapse
It is most likely the custom recovery that is the problem. Flash the stock recovery (found HERE), then try the RUU again.
Good news! A factory reset and redownloading the RUU.zip fixed the problem. I have my theories on what was messed up, but I'm just glad it worked out in the end. Thanks to all the people who tried to help.
Hey everyone,
So I have successfully HTC Unlocked my Rezound bootloader, installed Amon Ra, and then installed and booted the CM9 unofficial. Problem was that CM9 wasn't quite as cooperative as I'd hoped - it is unofficial, after all, and so I decided to abandon that in favor of Nils' Business ROM. Here's where I ran into issues.
I have tried everything in every order I can find online and think of, including Nils' writeup. So, for the life of me, I cannot get the leaked ICS RUU to boot (4.03.605.2 as listed in his instructions on XDA). Install runs fine every time I do it from the relocked (I checked) stock HBOOT, all steps included. Every time it reboots (and I've tried forcing it back into hboot to do the install a second time) it just goes to the white HTC screen and starts boot looping. Tried it a million ways, no go. Also worth noting - the stock recovery doesn't install properly, either. Some'fin is hinky, here.
So I've tried just "assuming" it went fine anyhow and then proceeding with the install for Nils' ROM and same deal, no go, although with one difference. With Nils' ROM, it does display the boot splash screen "Nils Business ROM" or what have you about 1 out of every 4 "boots" in the loop cycle, and then reboots again.
I think I am going to perform S-OFF tomorrow if I have the time, and then try it again using the S-OFF instructions, but I would sincerely appreciate any help from you all. Honestly, I'm at near wit's end with this device, and I don't want to be, I enjoy this chase too much, but I *really* want the reward at the end of it, lol.
Any help is deeply appreciated.
- Katie
Re: [Q]
I'm guessing because of the corrupted recovery, you have a bad download of the RUU. Try re downloading and check the md5 hash for a match. The ruu should reboot itself after the first pass and end up in bootloader again for the second pass.... If not then after the first pass just hold down power + vol down to get back to bootloader.
Hope this helps
Sent from my ADR6425LVW using xda app-developers app
Make sure that you have a booting ROM before you s-off. You will cause yourself all kinds of heartache if you don't.
Using an sd card reader on a pc, check md5 of your RUU zip file. If it checks out good, put the sd back in your rez and do an hboot power on and accept the update again. Report back with your findings. Also you will need to re-unlock your hboot after and install your recovery again.
Snuzzo said:
Using an sd card reader on a pc, check md5 of your RUU zip file. If it checks out good, put the sd back in your rez and do an hboot power on and accept the update again. Report back with your findings. Also you will need to re-unlock your hboot after and install your recovery again.
Click to expand...
Click to collapse
Hey, thanks. Yeah, the RUU does check out just fine against an MD5SUM.
nm.... just read your original post again and you say you did relock the phone. I was hoping it was something simple like that that was overlooked.
Carry on...
feralicious said:
Nothing to see here, folks, move along.
Click to expand...
Click to collapse
Right now, I cannot S-OFF because it requires a working stock image, and I'll be lucky to get anything more than CM9 unofficial working here.
You're too fast, now my bad post lives on...
So, when theh RUU failed, you unlocked again, flashed a custom recovery and tried to flash Nils' ROM?
Do you have a nandroid you can try to restore? Even if its the cm9 ROM at least to see if you can get it back to a working phone?
feralicious said:
You're too fast, now my bad post lives on...
So, when theh RUU failed, you unlocked again, flashed a custom recovery and tried to flash Nils' ROM?
Do you have a nandroid you can try to restore? Even if its the cm9 ROM at least to see if you can get it back to a working phone?
Click to expand...
Click to collapse
Well that's the trick. CM9 didn't work well enough to even be worth backing up. I'm trying to reinstall it again now just to see if I get there - and it looks like I will. Once I'm back up with that, I'm not sure where to go from there. The phone barely worked under CM9. Really hoping to get Nils' ROM on there, since it gives all the nice features of a stock device without the bloatware. Even if I never get S-OFF, I'll be perfectly happy with just Nils' software.
How about this... did you wipe everything before running the RUU? There's CleanWipe in the Development forum you can flash it from recovery and it will wipe everything 5 times!
This shouldn't make any difference, but there's also a different RUU, the OTA that's not global. You might try that one instead. I'm convinced that sometimes things are just voodoo even when they should be completely logical. That's definitely the case at work on the Avid systems I use.
Here's the link to it:
http://androidfiles.org/ruu/?dir=Vigor
feralicious said:
How about this... did you wipe everything before running the RUU? There's CleanWipe in the Development forum you can flash it from recovery and it will wipe everything 5 times!
This shouldn't make any difference, but there's also a different RUU, the OTA that's not global. You might try that one instead. I'm convinced that sometimes things are just voodoo even when they should be completely logical. That's definitely the case at work on the Avid systems I use.
Here's the link to it:
http://androidfiles.org/ruu/?dir=Vigor
Click to expand...
Click to collapse
I did try wiping everything first. No luck. I will try the CleanWipe tomorrow, because right now, whatever my issues are, I'm being prevented from solving them since I can't S-OFF and I can't even seem to get a working ROM to make the phone worth having! Ugh.
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Flyhalf205 said:
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Click to expand...
Click to collapse
Oh yeah! Try that. Someone else was having trouble and did it that way and it worked. Here's instructions, just make sure you use PH98IMG and not whatever is used in the instructions since it was written up for a different phone.
http://androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
Also, once you get your phone back to stock make a nandroid as soon as you flash the recovery again so you'll have that to go back to if you have any more issues.
Flyhalf205 said:
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Click to expand...
Click to collapse
Thank you, your magnanimity! Seriously, lol, you're gracing my thread just by being here. :victory:
feralicious said:
Oh yeah! Try that. Someone else was having trouble and did it that way and it worked. Here's instructions, just make sure you use PH98IMG and not whatever is used in the instructions since it was written up for a different phone.
http://androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
Also, once you get your phone back to stock make a nandroid as soon as you flash the recovery again so you'll have that to go back to if you have any more issues.
Click to expand...
Click to collapse
Thanks for the clicky, Feralicious. Same results, unfortunately. I'm going to try doing the RUU flash of Nils' ROM instead. Do you guys know where I can get the ICS firmware by itself? I cannot be sure that it's actually flashed right, unfortunately.
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Flyhalf205 said:
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Click to expand...
Click to collapse
I'll do that stuff and let you know. Thank you!
Yes, I am on 2.27 HBOOT.
Point of interest, though possibly unsurprising. When I send the lock command, it locks and reboots, but says "Failed" in my command window screen. Sure this is probably normal since the phone might just reboot before responding to the computer, but possibly an issue.
I believe that is the image I tried before, but I'll do it again both ways to be certain and report back soon! :good:
ncc74656m said:
Yes, I am on 2.27 HBOOT.
Point of interest, though possibly unsurprising. When I send the lock command, it locks and reboots, but says "Failed" in my command window screen. Sure this is probably normal since the phone might just reboot before responding to the computer, but possibly an issue.
I believe that is the image I tried before, but I'll do it again both ways to be certain and report back soon! :good:
Click to expand...
Click to collapse
My DNA said something about failing when I locked it. But it locked just fine.
Since it is failing.
fastboot oem rebootRUU
fastboot oem lock ----if unlocked
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
Should work Maybe
Flyhalf205 said:
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
Click to expand...
Click to collapse
Ok, so, this part including a factory reset got me to "HTC Quietly Brilliant" screen, but then it bootloops again. Tried factory resetting again to no avail. Trying the second part.
Flyhalf205 said:
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
Click to expand...
Click to collapse
Same thing as before unfortunately. :/ Performed a factory reset afterwards to be safe - no go. Everything shows OK though in both this and the above install. *shrug*
Flyhalf205 said:
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Click to expand...
Click to collapse
Proceeding with another attempt at installing CM9, I guess. Maybe the first one got hosed. If I get it booting in any form, I'll Nandroid it before trying anything else.
ncc74656m said:
Proceeding with another attempt at installing CM9, I guess. Maybe the first one got hosed. If I get it booting in any form, I'll Nandroid it before trying anything else.
Click to expand...
Click to collapse
I really wouldn't see why you would need a Sense rom to get s-off. I would imagine it would just need su and busybox installed. But nandroid then try a sense rom again. Make sure you flash the boot.img through fastboot
Hi,
I have a Sprint CDMA HTC EVO 3D. I tried root and get S-OFF for it. Unfortunately I failed and now the phone fail to boot.
Below is what I did from which you might be able to diagnose it and give me suggestions.
(1) The original status of mu phone is:
Stock rom, I never root it before.
HBOOT-1.58.0000
Android Version: 4.03
HTC Sense version: 3.6
Software version: 2.95.651.6.710RD
(2) My root procedures:
I followed this post: http://forum.xda-developers.com/showthread.php?t=1813818
I successfully unlocked phone with HTCDev, successfully Flashed 4EXT recovery, and successfully installed Superuser-3.1.3-arm-signed.zip. I also booted into sytem, everything worked well.
However I failed in next step of JuopunutBear's Wire Trick (S-OFF). When I ran ControlBear.exe, it finally hanged there.
Current status of my phone:
Unfortunately I did not make a backup to my original ROM, so there is no way to revert back by restoring backup.
Now the phone is in unlocked status, I was able to boot to HBOOT and also enter 4Ext recovery, however I am not able to boot into Android. If I try to boot into Android, it always hang at black screen.
I am able to boot to fastboot (USB) mode, I tried to flash some stock ROM (listed at http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209), but I failed. For example, I ran a RUU of 2.89.exe, it detected my phone version is 2.95, and further update RUU failed.
Looks like my partition is ruined, but I might be wrong.
ANyone can help me to restore my phone to working status? At least I need the phone to be able to boo to Android.
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
lsdyna said:
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
Click to expand...
Click to collapse
EDIT:
Okay. I've got some questions.
1. You're stuck on some black screen as you said. It boots past the white HTC splash and then it's stuck on that black screen, right. Do you mean the juopunutbear "arrow screen" - juopunutbears boot.img?
2. I think if you had flashed the original boot img everything would have been fine.
3. The easiest way is to flash to stock, so lets try to figure out why it doesn't flash.
MrJyrks said:
Okay. So from what I understood, you are stuck on the black juopunutbear screen, right?
Click to expand...
Click to collapse
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
lsdyna said:
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
Click to expand...
Click to collapse
And you can boot to recovery, right?
EDIT:
One more thing. Which ruu were you trying to run
Edit2:
What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Edit3:
BTW, this was on the wire trick page... http://unlimited.io/jbtroubleshooting.htm - TROUBLESHOOTING There was everything you needed to know when you failed at something. Remember that page. You may need it the next time you try to do the wiretrick.
Q: Were you using a linux distro for the wire trick and did you use the appropriate files for wire trick since GB and ICS have separate tools?
If you want I may assist you in gaining s-off if we get this thing functional again.
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
MrJyrks said:
And you can boot to recovery, right?
EDIT: One more thing. Which ruu were you trying to run
Edit2: What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Click to expand...
Click to collapse
lsdyna said:
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
Click to expand...
Click to collapse
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Edit: This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Now I only want to revert my phone to stock, not considering root at present time.
I searched 2.95 ROM, unfortunately the highest version that I can find is 2.89. Does this mean I have no way to revert my phone to live? Thanks a lot.
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
lsdyna said:
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
Click to expand...
Click to collapse
If you have access to the recovery, most likely, yes.
Hello MrJyrks,
Thank you so much for the link! I am eager to try that. Before I do that I think I shall ask two questions to avoid further mess up the device:
Question #1: To install the deodexed rom, which is the correct way:
(1) Rename the ZIP file to PG86IMG.ZIP, put to root of sdcard, then boot, letting the Bootloader to do the update.
(2) In 4EXT recovery, enable smartflash, enable script asserts, then install the zip from the root of sdcard.
Question #2: You said I shall flash boot image, can you tell me how to do this? I mean, where shall I get the boot image file? Flash it with 4EXT? SHall I do it before or after install ROM zip file?
Thank you very much for your helps!!!
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I tried install the stock ROM from your link (using 4EXT with smartflash enabled and script asserts enabled.) . Amazing that installation completed successfully (indeed this is the first ROM zip that I was able to install successfully since I mess up the device). When I exit After that, it did some further update which I guess is the boot.img that you mentioned.
4EXT it said 'a pending update for your boot partition is detected' and I think it was doing the boot image flash that you mentioned, right?
Unfortunately when I boo the device, I still got black screen.
Now I am unlocked and also rooted (since I successfully installed superuser in 4EXT). DO you think I shall lock the devioce before installing the stock ROM? If so, one possible issue is that if I relock the device, I found 4EXT is not available. In that case, how shall I install the ROM zip file?
Thanks.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
Further update:
I flashed boot image by: fastboot flash boot boot.img which is included in the stock ROM zip file.
The flash went successfully. However, I am still not able to boot to Android. WHat I have is the device hang there, alternatively displaying logo with white background, and black screen.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
lsdyna said:
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
Click to expand...
Click to collapse
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
MrJyrks, thank you so much!!!
MrJyrks said:
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
Click to expand...
Click to collapse
Similar problem, can't return to stock
I have a problem similar to lsdyna's, and am hoping that even though this post is old, MrJyrks or someone might be able to help me.
I am unsuccessfully trying to return my phone to stock. First a bit of history.
I had 2.95.651.6.710RD s-on hboot 1.58 Android Version: 4.03 HTC Sense version: 3.6 on my phone, and wanted root. I didn't need s-off, just wanted to root so could do some tweaking (stop some apps from autostarting, stop some form getting network access, etc.) so loaded 4EXT Recovery Touch, and got root (fastboot oem get_identifier_token method), got superuser in there, and happily began tweaking. Famous last words... I didn't make a backup right away (learned my lesson!) and suddenly found a 'overtweaked' sluggish phone on my hands.
Thought best thing would be to lose the root & return to stock & start over, carefully, making backups.
So I used Fastboot (fastboot oem lock) to lock it (worked) and proceeded to try to load RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe into it [via my computer], but didn't realize until reading MrJyrks post that a lower RUU couldn't be used.
I now am relocked (phone does boot up, but can tell the system tweaks are still slogging it), lost the recovery, and wondering what to do... do I try putting recovery back in & using the Negalite 2.95 stock deodex ROM MrJyrks mentioned? If so, how do I use that zip file method verses the exe one I tried thru my computer?
Thanks for the help
You had issues with the RUU because your main version is higher than that contained in the RUU.
Unlock, flash recovery again. Boot into recovery and flash this zip: https://copy.com/wlVvwssXXNN00Pe
That will lower your main version. Relock the bootloader, put the phone into fastboot USB mode, then run the RUU while in fastboot USB mode.
Should be back to stock after that.
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help