[Q] bricked my xperia minipro ? - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

so this morning i tried to root my xperia minipro.
i had the ics, so i flash the kernel to Neo MT11i_4.1.A.0.562_Kernel .
after i follow the flashing instruction.
i start to root my device with this tutorial > http://forum.xda-developers.com/showthread.php?t=1601038
then i flash the kernel back to SK17_4.1.B.0.587_Kernel .
the first attempt. after i follow all the instruction, nothing happen. my device still not rooted.
and i try to flash the kernel again, but then my phone screen goes black.
at first i thought it's just rebooting, but after i wait nothing happen.
i've tried to press the power button, and still nothing happen.
only the led on the back button turned on, and then goes off again and on again, and then off again.
i tried to flash the kernel again. but i can't even get to the flash mode.
did i just bricked my device ?

No, you didn't bricked it?
Your missing the root procedure...
Download and root using this...
http://www.4shared.com/zip/mzM0gROA/DooMLoRD_v1_Xperia-2011-ICS-RO.html?refurl=d1url
read this for the complete instruction in rooting.
http://talk.sonymobile.com/thread/41119

Yes u missed I have also rooted my phone with same trick
Model - Wt19i
Stock ICS 4.1.B.0.587
Kernel - Rage ICS v3.2

danugrah said:
so this morning i tried to root my xperia minipro.
i had the ics, so i flash the kernel to Neo MT11i_4.1.A.0.562_Kernel .
after i follow the flashing instruction.
i start to root my device with this tutorial > http://forum.xda-developers.com/showthread.php?t=1601038
then i flash the kernel back to SK17_4.1.B.0.587_Kernel .
the first attempt. after i follow all the instruction, nothing happen. my device still not rooted.
and i try to flash the kernel again, but then my phone screen goes black.
at first i thought it's just rebooting, but after i wait nothing happen.
i've tried to press the power button, and still nothing happen.
only the led on the back button turned on, and then goes off again and on again, and then off again.
i tried to flash the kernel again. but i can't even get to the flash mode.
did i just bricked my device ?
Click to expand...
Click to collapse
fangweile said:
No, you didn't bricked it?
Your missing the root procedure...
Download and root using this...
http://www.4shared.com/zip/mzM0gROA/DooMLoRD_v1_Xperia-2011-ICS-RO.html?refurl=d1url
read this for the complete instruction in rooting.
http://talk.sonymobile.com/thread/41119
Click to expand...
Click to collapse
Fangweile is rite, u miss out to root ur device after flashing the 1st kernel.
Just follow the tutorial in the sony blog, becareful to not forgeting some step again.
I used to be use that tutorial to root my phone,and everything is fine.
Good luck..
send from my SK17i via xda premium

i've done that already.
after the rooting process is done, all i had to do is flash the kernel back right ?
the root process is done, but i can't flash the kernel, i can't even get into flash mode.

danugrah said:
i've done that already.
after the rooting process is done, all i had to do is flash the kernel back right ?
the root process is done, but i can't flash the kernel, i can't even get into flash mode.
Click to expand...
Click to collapse
u flash kernel in fastboot mode not flashmode

MoonBlade said:
u flash kernel in fastboot mode not flashmode
Click to expand...
Click to collapse
No for kernel.sin of the stock firmware you go in flashmode and exclude all except from kernel...
Try it again, install the drivers again, press volume down while connecting, it must work. Take off battery before you try and reinsert. The phone must be turned off!

mihahn said:
No for kernel.sin of the stock firmware you go in flashmode and exclude all except from kernel...
Try it again, install the drivers again, press volume down while connecting, it must work. Take off battery before you try and reinsert. The phone must be turned off!
Click to expand...
Click to collapse
hey thank's a lot, it works! my device is up again!

danugrah said:
hey thank's a lot, it works! my device is up again!
Click to expand...
Click to collapse
Now maybe use another tutorial to root it, or try it again. For any questions just ask
Hit Thanks if I've helped

mihahn said:
No for kernel.sin of the stock firmware you go in flashmode and exclude all except from kernel...
Try it again, install the drivers again, press volume down while connecting, it must work. Take off battery before you try and reinsert. The phone must be turned off!
Click to expand...
Click to collapse
mihahn said:
Now maybe use another tutorial to root it, or try it again. For any questions just ask
Hit Thanks if I've helped
Click to expand...
Click to collapse
yeah, once again thank you, thank you very much!!!. and my device have been rooted

Thank God to know that,conggratulation then..
send from my SK17i via xda premium

fangweile said:
No, you didn't bricked it?
Your missing the root procedure...
Download and root using this...
http://www.4shared.com/zip/mzM0gROA/DooMLoRD_v1_Xperia-2011-ICS-RO.html?refurl=d1url
read this for the complete instruction in rooting.
http://talk.sonymobile.com/thread/41119
Click to expand...
Click to collapse
i'm also facing the same problem....
but when i open the "runme.bat"
it always shows "waiting for device"

apaini said:
i'm also facing the same problem....
but when i open the "runme.bat"
it always shows "waiting for device"
Click to expand...
Click to collapse
are you sure that you enabled the usb debugging???, I have the same problem when I root my phone, but this solved when the usb debugging is enabled....
regards!!!

Related

help! my mini pro stucked on sony ericsson logo

hey guys, this is my first time i would say i bricked my phone. i need someone to help me my phone has been in 'coma' for nearly 2 days now.
so this happened when i try to apply this mod http://forum.xda-developers.com/showthread.php?t=1306044 and after i carelessly copied framework-res.apk to system/framework using root explorer without setting the correct permissions, my phone automatically shuts off and try to restart but it failed, it stucked on the big sony ericsson logo and 'sony ericsson' text.
i have pull out the battery hundred times and try to reboot my phone normally but it didnt worked it still stucked on the sony ericsson logo.
so can anyone help me please...
what tools/application should i get to fix this?
first of all, i dont want to wipe/lose/factory reset my phone memory data because that would make my phone contacts gone which i never ever want to happen. so please is it possible to backup my contacts somewhere else if wiping is the answer at least??
okay i took a lot of time to type this and hoping someone give me an answer
Hi, what is your model no? and you rooted it?
Sent from my ST15i using xda premium
i use sk17i mini pro as mentioned above and yes it is obviously rooted
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Someguyfromhell said:
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Click to expand...
Click to collapse
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Izzy Stinson said:
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Click to expand...
Click to collapse
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Someguyfromhell said:
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Click to expand...
Click to collapse
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Izzy Stinson said:
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Click to expand...
Click to collapse
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Someguyfromhell said:
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Click to expand...
Click to collapse
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Izzy Stinson said:
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Click to expand...
Click to collapse
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Someguyfromhell said:
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Click to expand...
Click to collapse
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Izzy Stinson said:
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Click to expand...
Click to collapse
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
You should probably get a backup app and backup your stuff or either root again and install CWM and backup that way
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
Well he forgot to tell you that the first boot after every new 'fresh' flash required a little time for the phone to boot because it create cache at the boot animation...
Sent from my SK17a using xda premium
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Actually, i think you could've salvaged your phone without the need of flashing it... If you had access to CWM, you could've put framework file into zip file and flash it with CWM. It helped me once when i got stuck in bootloop after failed installation of a mod
maso321 said:
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Click to expand...
Click to collapse
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
do you know where i may get the software from ?
WORKED LIKE A CHARM !! thank you attemp number 2!
---------- Post added at 11:53 PM ---------- Previous post was at 11:34 PM ----------
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
you my friend are a dangous man !! flashing it now thanks again i got the stock rom
Problem Resolved
I think that is a bootloop problem , you can try this method. It helps http://www.youtube.com/watch?v=v4nfePh0KQc&feature=plcp
I also had this same problem when installing hybrom v17 with lock bootloader and stock kernel. It helped me a lot. Hit thanks if I helped

[Q] Xperia Sola hard brick Help! SOLVED! thanks to everyone

After all forgive my english and i will appreciate every answer!
Yesterday i was installing a custom rom, eXperience Innovation (the ROM with JB). and there was no problems. all the process went well and the installation finished correctly. i followed all the process how it was described in the thread and reboot the phone. Here is where the problem begin first the system get stuck at the sony logo (for much more time than usually takes when you install a rom) so i reboot again the phone and now it doesn't start.
Actually when i push the power button the green led flashes and nothing else occurs. i just can connect it in flash mode and fastboot mode
I've tried to fix it with pc companion but it says that the phone has a custom software that can't be updated (sony error 2003)
then i tried to install a stock kernel with flash tool but it gets stuck in the process. i tried by flash mode and fastboot mode several times and with different kernels but it doesn't work.
by the way i can't access CWM.
Please any help will be appreciated!
aempires said:
After all forgive my english and i will appreciate every answer!
Yesterday i was installing a custom rom, eXperience Innovation (the ROM with JB). and there was no problems. all the process went well and the installation finished correctly. i followed all the process how it was described in the thread and reboot the phone. Here is where the problem begin first the system get stuck at the sony logo (for much more time than usually takes when you install a rom) so i reboot again the phone and now it doesn't start.
Actually when i push the power button the green led flashes and nothing else occurs. i just can connect it in flash mode and fastboot mode
I've tried to fix it with pc companion but it says that the phone has a custom software that can't be updated (sony error 2003)
then i tried to install a stock kernel with flash tool but it gets stuck in the process. i tried by flash mode and fastboot mode several times and with different kernels but it doesn't work.
by the way i can't access CWM.
Please any help will be appreciated!
Click to expand...
Click to collapse
Did you try to install stock rom since you can connect your phone on flashmode?
DaRk-L0rD said:
Did you try to install stock rom since you can connect your phone on flashmode?
Click to expand...
Click to collapse
yes, i tried several times but neither the process don't start or get stuck in the middle!
aempires said:
yes, i tried several times but neither the process don't start or get stuck in the middle!
Click to expand...
Click to collapse
You have unlocked bootloader, right mate?
Sola didn't get official jb update.
When you install jb for first time you have to wait till your phone boots properly. Could ask 15-30 minutes or even more. The key is to be patient.
DaRk-L0rD said:
You have unlocked bootloader, right mate?
Sola didn't get official jb update.
When you install jb for first time you have to wait till your phone boots properly. Could ask 15-30 minutes or even more. The key is to be patient.
Click to expand...
Click to collapse
yes the bootloader was unlocked and i wait almost 15 minutes. and you know what happens. there is any advice or help you can give me?
aempires said:
yes the bootloader was unlocked and i wait almost 15 minutes. and you know what happens. there is any advice or help you can give me?
Click to expand...
Click to collapse
The only advice i can give you for now is lock your bootloader and try repairing with sony pc companion.
Pc companion will not work on unlocked bootloader.
DaRk-L0rD said:
The only advice i can give you for now is lock your bootloader and try repairing with sony pc companion.
Pc companion will not work on unlocked bootloader.
Click to expand...
Click to collapse
I have tried to install a kernel for re lock bootloader. but it i couldn't install it. is there any other way?
aempires said:
I have tried to install a kernel for re lock bootloader. but it i couldn't install it. is there any other way?
Click to expand...
Click to collapse
I've successfully locked the bootloader as you said but when i connect it to pc companion it says that theres is no software update for my phone (i did it in the repair option)
aempires said:
I have tried to install a kernel for re lock bootloader. but it i couldn't install it. is there any other way?
Click to expand...
Click to collapse
It's not a kernel mate it's an ftf file. You have to flash it via flashmode not via fastboot mode.
here is the link: http://forum.xda-developers.com/showthread.php?t=1920189
DaRk-L0rD said:
It's not a kernel mate it's an ftf file. You have to flash it via flashmode not via fastboot mode.
here is the link: http://forum.xda-developers.com/showthread.php?t=1920189
Click to expand...
Click to collapse
OK, my mistake. but yes i did it by flash mode!
This is no hard brick. This is soft kernel brick. A hard brick is when you can't enter flash mode, and your phone is dead(cannot power on) you can get a hard brick if you are some crazy dev :-\ who constantly brick his phone lol
Sent from my LT22i using xda app-developers app
AndroidNoob69 said:
This is no hard brick. This is soft kernel brick. A hard brick is when you can't enter flash mode, and your phone is dead(cannot power on) you can get a hard brick if you are some crazy dev :-\ who constantly brick his phone lol
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
thanks for the that info!
aempires said:
OK, my mistake. but yes i did it by flash mode!
Click to expand...
Click to collapse
Did you get any error?
If no, means that your bootloader is now locked. Try installing again stock rom via flashmode or repair your phone using pc companion.
Don't remember where, a user told that had a similar issue with another device and solved it using this tool: http://developer.sonymobile.com/services/flash-tool/
Read the instructions on how to install and use this tool mate.
had similar issue. will try using those methods and see if work. thanks
aempires said:
After all forgive my english and i will appreciate every answer!
Yesterday i was installing a custom rom, eXperience Innovation (the ROM with JB). and there was no problems. all the process went well and the installation finished correctly. i followed all the process how it was described in the thread and reboot the phone. Here is where the problem begin first the system get stuck at the sony logo (for much more time than usually takes when you install a rom) so i reboot again the phone and now it doesn't start.
Actually when i push the power button the green led flashes and nothing else occurs. i just can connect it in flash mode and fastboot mode
I've tried to fix it with pc companion but it says that the phone has a custom software that can't be updated (sony error 2003)
then i tried to install a stock kernel with flash tool but it gets stuck in the process. i tried by flash mode and fastboot mode several times and with different kernels but it doesn't work.
by the way i can't access CWM.
Please any help will be appreciated!
Click to expand...
Click to collapse
happened to me this before with XU and Xsola, on sola i fix my phone as follows:
reboot on flashmode (vol down press)
re install the stock kernel .10 and next .54 via flashtool (u can found here) original post from (http://forum.xda-developers.com/showthread.php?t=2029756 @slackerzz)
install stock .54 ftf
this alwys work for my when my phone stuck at the sony logo for long time,
i hope help u if i help u plz hit thanks xD
DaRk-L0rD said:
Did you get any error?
If no, means that your bootloader is now locked. Try installing again stock rom via flashmode or repair your phone using pc companion.
Don't remember where, a user told that had a similar issue with another device and solved it using this tool: http://developer.sonymobile.com/services/flash-tool/
Read the instructions on how to install and use this tool mate.
Click to expand...
Click to collapse
Yes, when i re lock the bootloader i could finally install an stock kernel! now my phone is back! Thanks a lot!!!!
aempires said:
Yes, when i re lock the bootloader i could finally install an stock kernel! now my phone is back! Thanks a lot!!!!
Click to expand...
Click to collapse
Glad your phone is back to life!
Enjoy!
DaRk-L0rD said:
Glad your phone is back to life!
Enjoy!
Click to expand...
Click to collapse
I have to thank you for your help! but i came with other problem now. the phone is working, now i can root, instal kernel, roms, etc... But i have noticed that the phone doesn't sound or vibrates. if i use any headset i can hear everything but without that there is no sound or vibration. can you know what it could be? i've been looking but can't find any solution yet
xperia sola
aempires said:
Yes, when i re lock the bootloader i could finally install an stock kernel! now my phone is back! Thanks a lot!!!!
Click to expand...
Click to collapse
i was trying to install experience v2 custom rom and my device is sola. when i installing the custom rom my device got strucked. therefore i pressed vol + and power button. now my phone get struck at sony logo. i can't go to the clockwork mod recovery. i downloaded sony emma and tried.when i registering there it's not sending the registering link to my email address. what can i do for this. please help me
nthilina said:
i was trying to install experience v2 custom rom and my device is sola. when i installing the custom rom my device got strucked. therefore i pressed vol + and power button. now my phone get struck at sony logo. i can't go to the clockwork mod recovery. i downloaded sony emma and tried.when i registering there it's not sending the registering link to my email address. what can i do for this. please help me
Click to expand...
Click to collapse
Have you tried installing a custom rom with flash tool?

[Q] Need help to recover from endless loops

Hi guys,
I'm using Xperia sola rooted phone with 4.0 and I was installing metamorph - lock theme and the phone restarted and it is going in an endless loop of resarts.
It's possible to put the phone completely off by using power & volume key combo, also i can put the device under flashboot and fastboot mode.
Kindly tell me a way outta this !!
I won't be getting a cell phone for another year I guess
@xtro55
Do you have CWM and if you do does it have adb?
Post a link to the theme file.
ChikeD said:
@xtro55
Do you have CWM and if you do does it have adb?
Post a link to the theme file.
Click to expand...
Click to collapse
CWM isnt installed on my xperia sola sadly
This is the theme file : "droidpirate.com/2011/09/14/metamorph-droid-bionic-lock-slider-bionic/"
prior to this, an app named metamorph was installed.
I can put the device in flashboot/fastboot though!
Any chances that I can recover the phone?
xtro55 said:
CWM isnt installed on my xperia sola sadly
This is the theme file : "droidpirate.com/2011/09/14/metamorph-droid-bionic-lock-slider-bionic/"
prior to this, an app named metamorph was installed.
I can put the device in flashboot/fastboot though!
Any chances that I can recover the phone?
Click to expand...
Click to collapse
If you bootloader is unlocked you can try flash a kernel with CWM that support adb.
If not, do you have the FTF file for the firmware that is currently installed?
I would try at first flashing system.sin only from the firmware FTF, no wipes everything else expluded.
You will lose root and other modes copied directly to /system but you should have data intact.
ChikeD said:
If you bootloader is unlocked you can try flash a kernel with CWM that support adb.
If not, do you have the FTF file for the firmware that is currently installed?
I would try at first flashing system.sin only from the firmware FTF, no wipes everything else expluded.
You will lose root and other modes copied directly to /system but you should have data intact.
Click to expand...
Click to collapse
Well no CWM installed & I haven't done the unlocking of bootloader yet.
Yeah I do have these two files in my flashtool firmware folder which I used :
MT27i_6.1.1.B.1.10_KERNEL.ftf
MT27i_6.1.1.B.1.54_KERNEL.ftf
Which one are you referring to, since I had to use .10 first followed by .54 to get the root done !
Can you please point to a tutorial where I can follow the steps which you are referring to? That will be helpful
xtro55 said:
Well no CWM installed & I haven't done the unlocking of bootloader yet.
Yeah I do have these two files in my flashtool firmware folder which I used :
MT27i_6.1.1.B.1.10_KERNEL.ftf
MT27i_6.1.1.B.1.54_KERNEL.ftf
Which one are you referring to, since I had to use .10 first followed by .54 to get the root done !
Can you please point to a tutorial where I can follow the steps which you are referring to? That will be helpful
Click to expand...
Click to collapse
But flash overrides and erase everything.
For root didn't you just had to install kernel .10 over .54 firmware no?
Anyway the system from the one that is flashed now you the only one that knows which, I am guessing .54
ChikeD said:
But flash overrides and erase everything.
For root didn't you just had to install kernel .10 over .54 firmware no?
Anyway the system from the one that is flashed now you the only one that knows which, I am guessing .54
Click to expand...
Click to collapse
Check this link: "theunlockr.com/2013/09/10/how-to-root-the-sony-xperia-sola-running-6-1-1-b-1-54-firmware/"
I used the above method to get the root done. Yeah it's running .54 currently. But the rooting wasn't the issue, it happened successfully, the theme which I mentioned gave me endless loop of restarts problem.
xtro55 said:
Check this link: "theunlockr.com/2013/09/10/how-to-root-the-sony-xperia-sola-running-6-1-1-b-1-54-firmware/"
I used the above method to get the root done. Yeah it's running .54 currently. But the rooting wasn't the issue, it happened successfully, the theme which I mentioned gave me endless loop of restarts problem.
Click to expand...
Click to collapse
I just said that flashing system will make you lose anything that's on it, in that includes root
ChikeD said:
I just said that flashing system will make you lose anything that's on it, in that includes root
Click to expand...
Click to collapse
Did that .. with .54
yet problem persists. I dont mind if data goes away .. I can get the apps n all back, already have contacts backup on sim.. so its alright ..just give me a tut which will fix the issue please ....
xtro55 said:
Did that .. with .54
yet problem persists. I dont mind if data goes away .. I can get the apps n all back, already have contacts backup on sim.. so its alright ..just give me a tut which will fix the issue please ....
Click to expand...
Click to collapse
Bro just flash stock firmware via from flashtool don't wipe any thing your apps still in there
Sent from my ST25i using XDA Premium 4 mobile app
dara007_168 said:
Bro just flash stock firmware via from flashtool don't wipe any thing your apps still in there
Sent from my ST25i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tutorial please on how to carry on !!
I dont care if the apps or data gets deleted, i just want to make it run :crying:
I'm getting paranoid without my device ..
Thanks
xtro55 said:
Tutorial please on how to carry on !!
I dont care if the apps or data gets deleted, i just want to make it run :crying:
I'm getting paranoid without my device ..
Thanks
Click to expand...
Click to collapse
try to download stock .54 firmware from here http://forum.xda-developers.com/showthread.php?t=2030261 and flash it via flashtool with removed tick on wipe data (how to use flashtool check this thread http://forum.xda-developers.com/showthread.php?t=928343
sanya7901 said:
try to download stock .54 firmware from here http://forum.xda-developers.com/showthread.php?t=2030261 and flash it via flashtool with removed tick on wipe data (how to use flashtool check this thread http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Hey Thanks,
Let me get back to you once I finish with the flashing.
Thanks for the links
sanya7901 said:
try to download stock .54 firmware from here http://forum.xda-developers.com/showthread.php?t=2030261 and flash it via flashtool with removed tick on wipe data (how to use flashtool check this thread http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you very much !! You are a life saver :angel:
It is working fine .. although my battery shows 5%, its not going up even on charging ..
xtro55 said:
Thank you very much !! You are a life saver :angel:
It is working fine .. although my battery shows 5%, its not going up even on charging ..
Click to expand...
Click to collapse
glad to help you

PLEASE i need help my phone is broken . i am desperate.

My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
mctf said:
My Xperia Sola is DEAD !!
My problem is :
My sola is complete dead.
I try to install custom firmware and i make something wrong and stuck to Sony logo. Sony Update center cannot recognize it because said i brake the guarantee something like this. This happened again and i fix it . Now i cannot fix it. I sent it already to sony centre in my country and they said to me we cannot fix it they said to me.
Have a nice day. I will appreciate all help.
Ps: Sorry for my bad english.
Click to expand...
Click to collapse
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
ChikeD said:
What did you do exactly?
Is your bootloader unlocked, and do you know and used flashtool, PC Companion, or Sony Update before?
Click to expand...
Click to collapse
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Did you try to flash some other kernel?? And then try to enter CWM...
I think i found the way
RJ_ said:
Did you try to flash some other kernel?? And then try to enter CWM...
Click to expand...
Click to collapse
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
mctf said:
How use FlashTool without debugging mode on?
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode , but i cant boot into system and turn it on!!!
help me .
I think i found the way but i cannot turn on the phone to enable debugging mode.
Click to expand...
Click to collapse
I know that is confusing but USB debug no need to be on to flash. Just flash ignore that msg
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
mctf said:
Yes its unlocked . Yes i know.
I dont know now how to fix it.
I need stock kernel now to fix it ?
I flash my kernel to stock and nothing happens !
Click to expand...
Click to collapse
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
ChikeD said:
First thing you need to calm down.
You can flash a formware with flashtool, no need for debugging mode.
You just need to download firmware file or to build it yourself.
To download you will have to search.
To build your own, start PC Companion, click start under support zone, click start under phone / tablet software update, click the link repair my phone / tablet, follow the instructions on screen until it finish downloading files and ask to connect in flash mode. then stop it.
Follow one of the guids below to build FTF file
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Once done flash the file you made, with flashtool, in flash mode.
Click to expand...
Click to collapse
The link is for locked bootloader. you do not need debugging mode for flashing a new kernel. Just put your phone in fastboot mode. and flash the kernel using cmd. then restart your phone. You will be able to enter CWM.
I FIX it
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
mctf said:
ΟΚ guys thanks.
I just Locked the bootlander and sony system update regonize it.
Its so simple at last !!
Click to expand...
Click to collapse
Now you must have the files, build your FTF.

"Help" Cant flash kernel to my ZU

need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
martin132014 said:
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...
Sent from my C6833 using Tapatalk
blueether said:
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...[/QUOTE]
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
Click to expand...
Click to collapse
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
mathurmatt said:
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
Click to expand...
Click to collapse
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
G sound said:
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
Click to expand...
Click to collapse
Just flash 757 ftf not kernel..flash it with flashtool not recovery...it will restore your phone....then root it again...
Sent from my C6833 using Tapatalk
G sound said:
i dont know master...
Click to expand...
Click to collapse
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
LordManhattan said:
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Yes master...:good:
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but before I got stuck...
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but right now I got stuck...
Jammol said:
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
Click to expand...
Click to collapse
I can't download it... It say invalid argument...
G sound said:
I can't download it... It say invalid argument...
Click to expand...
Click to collapse
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
blueether said:
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
Click to expand...
Click to collapse
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Thanks again to all of you masters...
G sound said:
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Don't forget to backup you TA PARTITION before you unlock your device,
If you need any help PM me ill be glad to help
Click to expand...
Click to collapse

Categories

Resources