Background
Used many hours to set up phone to my liking. Got a problem with earphone-jack, so i handed it in. I couldnt do a proper backup beforehand, cause this required root access. The earphone-jack got replaced, but they also decided to upgrade my phone to the newest firmware? , deleting everything in the process. I will set everything up again in the weekend, but i do NOT want to do this a third time .
I have searched around for guides, but since i cant find a LQ6 kernel, every guide is telling me to use a different kernel. The best thing would be to root only. Does this work with my phone ?
What i need
Root only
Ability to unroot would also be nice
About phone
Model: GT-I9100
Android v. 4.0.4
Baseband: I9100XXLQ6
Kernel: 3.0.15-1068762 [email protected] #3 SMP PREEMPT Wed Aug 29 13:40:41 KST 2012
Build: IMM76D.XWLPX
Other Question
If i get another problem with the phone, backup everything, unroot and hand it in. If they decide to upgrade my firmware again, will i still be able to restore my backup ? What backup program is best to use in your opinion ? I want app settings, launcher settings and homescreen setup to be backed up.
HELP : GOT TWO NEW QUESTIONS
I tried to follow the guide in "theunderling"s signature.
At first i thought the files were supposed to be on the internal SD card, so i put them there and rebooted the phone into recovery. While there i tried to find my files, of course to no luck. I thought that maybe i had to unplug the USB, so i did this while in rec. menu. Still didnt find the files, so i rebooted my phone. Suddenly there were a REALLY LOUD ALARM NOISE coming from my phone. I have never heard that sound from my phone before. It stopped after a while, but has also happened at random times since. WHAT IS THIS ? (To be clear: this came before i ran any of the downloaded programs/scripts/etc).
After this i found an external SD - card and put the files on this. Got root access in a couple of seconds, and everything seemed fine. But now my computer refuses to connect to the phone "couldnt find hardware-ID" or something (Translated from my windows language, so might not be 100 % accurate. HOW TO FIX ?
BTW Thank you all so much for your time. I really appreciate it
1.use the guide in my sig or flash a siyah rooted kernel.
2.a nand backup.
3.you can just flash the firmware you listed back on your phone and that would unroot it.
Download it from sammobile now and keep it on your pc if you need it later(and keep nand backup there also).
4.if you get it back,reroot again and put the nand backup back on your sd card and flash that in cwm.
Dont forget to back up efs folder once you root(keep that on pc).
1. Do as theunderling said, or you can use the PhilZ-CWM6 kernel, which is pure stock based. http://forum.xda-developers.com/showthread.php?t=1877270
2. Do a NANDROID backup. Make sure to have atleast 1.1GB available on your MicroSD card. This is done in CWM recovery.
3. To unroot, I believe flashing a stock kernel will do the job, if you only have flashed a kernel. Also, the SuperSU app included in the PhilZ kernel has an unroot option.
Also, backup you EFS folder. And have atleast two backups of it.
Ignore my no.3 as I was thinking you would be installing a rom later.
That rooting method I said also lets you unroot.
Hi. Thanks so much for your answers. When rooting my phone, two problems arose (See original post). Would be really grateful for any input on those.
Never heard of an alarm sound happening-maybe you set alarm/event.
Anyway,what stage are you at.Are you definitely rooted.Is the phone booting as normal and can you access recovery/download mode.
theunderling said:
Never heard of an alarm sound happening-maybe you set alarm/event.
Anyway,what stage are you at.Are you definitely rooted.Is the phone booting as normal and can you access recovery/download mode.
Click to expand...
Click to collapse
Hi! Did check around for any events/alarms, and im sure its not the issue. Since i couldnt connect to my phone via USB, i tried Kies Air, and the alarm sound started again. Tried a few times, and EVERY time i start Kies air, i will get this sound for 5-10 seconds. It also happened twice when i werent even touching the phone :/
I have tried two programs which require SU - access. Got a prompt when starting them , and they worked fine . Kies Air works fine too btw. (Its the USB - connection that i cant get to work).
Also: For some reason i had SUPERUSER installed from before, and now i cant uninstall it again. Also, when i gave the two programs i tested superuser access, it showed the SUPERUSER icon. (program in big letters)
Just to make it clear again: The alarm sound came after i had fooled around in recovery mode, before ANYTHING where installed.
Youve not answered the previous questions.
You should be flashing a "safe" siyah kernel and backing up your efs folder.You can make a nand backup before that or after.
Just get the .zip file from gohkmoran site and flash via cwm.Then get hktool from play store for your efs.
Then the alarm/usb/pc problems can be looked into.
theunderling said:
Youve not answered the previous questions.
You should be flashing a "safe" siyah kernel and backing up your efs folder.You can make a nand backup before that or after.
Just get the .zip file from gohkmoran site and flash via cwm.Then get hktool from play store for your efs.
Then the alarm/usb/pc problems can be looked into.
Click to expand...
Click to collapse
Sorry, here are some more info:
Download modeI get a warning screen against installing custom os? volume up for install and volume down for reboot. Have never tried DL boot before, so cant say anything about this one
Recovery mode Boots normal and looks exactly like earlier.
Normal Boot Looks like before i rooted. No new programs either.
Could you link directly to which kernel i should use ? I have no idea :/ sry
Sorry,I should have explained a bit more.
Get the siyah kernel file and put it on your sdcard/internalsd
Do the rachmat stuff again.Once you install cwm.zip and su-busybox.zip..........dont reboot.
Install the siyah-s2-v4.01cwm.zip file (whilst your still in temp cwm)you download from his site(google should take you to the file).
Then you end up with a safe kernel and permanent cwm.
Then you can do nand and efs backups
theunderling said:
Sorry,I should have explained a bit more.
Get the siyah kernel file and put it on your sdcard/internalsd
Do the rachmat stuff again.Once you install cwm.zip and su-busybox.zip..........dont reboot.
Install the siyah-s2-v4.01cwm.zip file (whilst your still in temp cwm)you download from his site(google should take you to the file).
Then you end up with a safe kernel and permanent cwm.
Then you can do nand and efs backups
Click to expand...
Click to collapse
What i did
Resetted to factory settings
Installed cwm.zip
Installed su-busybox.zip
Installed Siyah-s2-v4.1.5-CWM.zip
What i got
No more funky alarms. Neither with kies, or any other program. :good:
Pc connection works if i put it in mass storage mode :good:
Got a CWM app, which i used to take a nandroid backup :good:
Still cant find hardware ID. (So i still cant just connect and open folder)
Thanks so much
Most important is the connection thingy (in case its something "serious" But if you feel in an extremely helpful mood, i got two more questions.
For unrooting To unroot i probably need to:
Flash Stock Kernel (from where ???)
install SU-Uninstaller-Signed.zip
What about CWM and SuperUser. How do i get rid of those 2 ?
Backup
For more advanced backup (backup individual apps etc), I `ve heard about a couple different apps: Titanium Pro and Superuser Elite. Do you recommend one of these?
Try this for your hardware problem.I never use kies as its ****
You can use this,or go to sammobile and flash xwlpx to get back to stock.
You can use titanium backup to backup your apps and also "remove" crappy system apps etc(theres a thread that guides you what to/what is safe to remove).
And get your efs backed up.
theunderling said:
You can use this,or go to sammobile and flash xwlpx to get back to stock.
You can use titanium backup to backup your apps and also "remove" crappy system apps etc(theres a thread that guides you what to/what is safe to remove).
And get your efs backed up.
Click to expand...
Click to collapse
Thanks again!!
I dont like Kies either, but wanted to fix my problem of 2 reasons
- I was afraid it was a symptom of something serious
- MDP mode without kies is nice to use when you only need to upload a few files to your phone on the go
WELL, KIES WAS THE SOURCE OF MY PROBLEMS. When i uninstalled Kies - drivers, it worked perfectly.
Have taken backup of my efs now (with HC-Ktool, which i assume u meant ), so now i will start setting up my phone to my liking. Thanks so much :highfive:
So basically got everything i came for
But, hmm still unsure if i will get completely unrooted phone from flashing stock kernel and removing SU. Wont the CWM that came with Siyah still be installed ? Can i uninstall this normally afterwards ? Or can i uninstall it before i remove superuser, and then use the CWM -booter thingy to get rid of SU ?? Hmm sorry for being such a noob.
slimchancex said:
Thanks again!!
I dont like Kies either, but wanted to fix my problem of 2 reasons
- I was afraid it was a symptom of something serious
- MDP mode without kies is nice to use when you only need to upload a few files to your phone on the go
WELL, KIES WAS THE SOURCE OF MY PROBLEMS. When i uninstalled Kies - drivers, it worked perfectly.
Have taken backup of my efs now (with HC-Ktool, which i assume u meant ), so now i will start setting up my phone to my liking. Thanks so much :highfive:
So basically got everything i came for
But, hmm still unsure if i will get completely unrooted phone from flashing stock kernel and removing SU. Wont the CWM that came with Siyah still be installed ? Can i uninstall this normally afterwards ? Or can i uninstall it before i remove superuser, and then use the CWM -booter thingy to get rid of SU ?? Hmm sorry for being such a noob.
Click to expand...
Click to collapse
I am sure that flashing a stock kernel will unroot your phone, kill me if I am worng . (I am noob also.)
CWM will be removed once your on the stock kernel.
Once you set up your phone,make a nand backup of that.
You want to able to use usb so you can use Odin,especially if something goes wrong flashing something and you cant boot phone, or into cwm.
Flashing a stock rom unroots the phone.For warranty,you go into download mode and check binary is at zero,and official firmware is at yes.
Related
I gained root access through superoneclick gingerbreak. It gave me the superuser app and i downloaded rom manager but whenever i try to get to clockwork recovery mode it keeps going to samsung recovery. No matter how many times I hit re-install packages it goes back to the samsung recovery. What did I do wrong? Should I have gained root another way? Should I try to flash back to 2.1? Please help I'm so frustrated.
first off dont use gingerbreak. Just odin back to stock and then root by installing the update package twice and after twice ur recovery should turn blue to green.
here follow this, use the eclair root guide:
http://forum.xda-developers.com/showthread.php?p=9375927
Rsuave419 said:
I gained root access through superoneclick gingerbreak. It gave me the superuser app and i downloaded rom manager but whenever i try to get to clockwork recovery mode it keeps going to samsung recovery. No matter how many times I hit re-install packages it goes back to the samsung recovery. What did I do wrong? Should I have gained root another way? Should I try to flash back to 2.1? Please help I'm so frustrated.
Click to expand...
Click to collapse
no modded 3e recovery..so it will keep going to Stock recovery. You need to do what movie said or flash a voodoo kernel or flash a modded 3e recovery.
Interestingly enough I have the same problem, 100% rooted, super user access no issue, busy box installed, root manager installed.
I upgraded the 2.1 to 2.2 from the kies mini software.
I have been doing a ton of reading and would like to start flashing roms, etc etc.
Through titanium backup, I have un-installed a large mount of apps and have not suffered any problems as of yet, but would like to try some custom roms.
My question is, since I uninstalled alot of things, only apps that are bloatware, and since I can't get my clockwork recovery console to take affect, do I have to follow post #2?
Is this link the right one taken out of the link from post #2
http://forum.xda-developers.com/showthread.php?t=1047087
Is this the final and correct link, since I do not store data on my phone, and all contacts are on my sim card, and really haven't done any customizations to anything really, can I just odin back and not back anything up? All I use my phone for is calls, txt's and internet, I don't bookmark anything, I don't save txts and call logs mean nothing to me?
I assume I will have to re-root my phone again and do the same procedures, etc etc.
Also as a side note, I am a minimalist type of person, that's why I use linux at home, no windows of any kind (I'll do this procedure at work). Any roms out there that can handle my needs of simply calls, txt'ing and internet without all the other stuff? I don't use GPS, I don't facebook or social network, I don't play games on my phone. I do need however, the use of the camera and video recorder.
Thanks.
I would just follow my advice and odin back to stock its really easy and safe to do. Well if the only apps u have left are bloatware and u dont save anything else i guess u wont need to back anything up before odin. Well the thing its alot easier to root 2.1 then 2.2.
Once ur at 2.1 just do the root process of installing update package twice and after twice ur recovery will turn from blue to green.
follow this guide
http://forum.xda-developers.com/showthread.php?p=9375927
the eclair guide
heres the steps for download mode just in case:
power off phone
pull out battery
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
So, is this the right link from the guide you posted, it's amazing, I read so many things today that It's easy to get a little well, brain farty, ya know.
http://forum.xda-developers.com/showthread.php?t=1047087
Also, I have the kies mini drivers installed, that's how I updated from 2.1 to 2.2 so I assume those will work fine?
BTW, this is the coolest community, props to all involved!!!
Now, I edited my post I think while you were replying, any rom suggestions for a simple user who likes minimal applications but just a well running phone that's not clogged to the gills with stuff?
good noob friendly rom is bionix 1.3.1!
movieaddict said:
good noob friendly rom is bionix 1.3.1!
Click to expand...
Click to collapse
Yep, that seems to be the consensus, thank you
Guys,
A huge thanks, odin'd back to 2.1, rooted, removed the bloatware I didn't want, gonna make a nandroid back, then proceed on to bionix.
I can understand how first time users can get nervous but once done, the process really is not that hard, just takes patience and making sure everything is prep'd before doing so.
I hope I can now help others if you guys don't beat me to it first
My only question is this: when I create my nandroid backup, where does it go and do I need to save it somewhere just in case like a usb key or something along those lines or does it reside on the phone. Only asking cause I have not yet done this step
U can always make a extra backup and store them on ur ext sd
Sent from my SGH-T959 using XDA Premium App
Okay, so I assume the backup, made from rom manager "backup current rom" gets stored to the internal memory on the phone?
Any special settings or it just does it's thing, should be smaller than normal as I removed quite a bit of junk and stuff.
i did what you said and i still cant get into clockwork recovery screen! i went back to stock rom, reinstalled packages twice and i still have samsung recovery. i know i have root because i get the super user asking me to give clockwork root access!
So I assume you odin'd back to 2.1, rooted have installed titanimum backup and busy box, rom manager, tapped the flash clockworkmod recovery, then "reboot in recovery" choose update. I rebooted via the rom manager menu, not via the phone itself. I had to update twice immediately, didn't reboot and do it again. I saw it installing and it kinda hung, then used the volume down to update again, and was completed.
Also after installing titanium there was an update for super user, which I also installed as well. Did you do this? Not sure if it has any bearing but thought it was worth mentioning.
It worked seamlessly for me, I had to update twice, then purple turned to green and all is well.
Can you post your steps you took to get back to 2.1, how you rooted, etc etc?
It's kinda fresh in my mind as I only did it about 2 hours ago.
my screw up after i flashed clockwork and rebooted i didnt apply package. all is good now. thx for all the info!
Anytime, I found the process to be quite interesting and taught me alot and also removed my fear of installing new roms and such.
Make sure to create your backup through rom manager. When you do, it will reboot into clockwordrecovery and show you the progress, didn't take that long for mine but I removed alot of nonesense from 2.1. This will be your emergency fall back, you might know this already but just making sure, as I am quite a noob at this point ROFL!
Enjoy
ps - I still can't decide on a new rom, I'm so fussy about stuff, ugh.
Hi, stupid question here from a relative noob....
I have a Cincinnati Bell Vibrant, that I recently flashed CM7 on (after using Rom Manager to backup up my stock rom). Liked it, but found it too battery-intensive, so I booted into clockworkmod recovery and attempted to restore the backup of my stock rom. It failed on flashing the boot image, and now my phone is stuck on the Vibrant screen, and won't boot. None of the hardware combinations to get into recovery mode are working, but I can get it into download mode. Before I screw things up further, what is the best way to go from here to get the backup restored, or is it even possible at this point?
Thanks
tabbott01 said:
Hi, stupid question here from a relative noob....
I have a Cincinnati Bell Vibrant, that I recently flashed CM7 on (after using Rom Manager to backup up my stock rom). Liked it, but found it too battery-intensive, so I booted into clockworkmod recovery and attempted to restore the backup of my stock rom. It failed on flashing the boot image, and now my phone is stuck on the Vibrant screen, and won't boot. None of the hardware combinations to get into recovery mode are working, but I can get it into download mode. Before I screw things up further, what is the best way to go from here to get the backup restored, or is it even possible at this point?
Thanks
Click to expand...
Click to collapse
This doesn't sound too bad. Basically you want to Odin back to stock. Then reflash the rom you were on, then you can reboot back into recovery and restore your backup. If voodoo was enabled on your backup make sure voodoo is enabled again before restoring(it might work either way, but I'm not sure). When I've done this, I restore a prerooted 2.2 stock Rom without changing the bootloaders, but almost any official stock rom will also work. I'm on the go, so I don't have a link handy, but post back if needed and I will point you to the odin package I use. Good luck.
I also am having some issues with Clockworld recovery. The problem i am having is that when doing a nandriod backup this is the error i am recieving
"E:cant mount /dev/block/mmcblk1p1 (or @)
Cant mount /mnt/sdcard
any suggestions on whats going on?
phone_noobie said:
I also am having some issues with Clockworld recovery. The problem i am having is that when doing a nandriod backup this is the error i am recieving
"E:cant mount /dev/block/mmcblk1p1 (or @)
Cant mount /mnt/sdcard
any suggestions on whats going on?
Click to expand...
Click to collapse
Are you sure the sdcard is good? If so then I would follow the same steps listed above, that way you know your CWR is good.
mattb3 said:
Are you sure the sdcard is good? If so then I would follow the same steps listed above, that way you know your CWR is good.
Click to expand...
Click to collapse
yes it is good because i can see all the videos, pics i have saved in it. Also i put the new ROM on my internal sd card and its there so sd card is def good. What could be causing the problem?
To the op, I would use Odin, no real worries there.
To the other guy with sdcard issue, try moving all files to your PC, format your sdcard, reboot, move files back, flash cwr in ROM mgr, backup work? Move critical files back from PC.
mattb3 said:
This doesn't sound too bad. Basically you want to Odin back to stock. Then reflash the rom you were on, then you can reboot back into recovery and restore your backup. If voodoo was enabled on your backup make sure voodoo is enabled again before restoring(it might work either way, but I'm not sure). When I've done this, I restore a prerooted 2.2 stock Rom without changing the bootloaders, but almost any official stock rom will also work. I'm on the go, so I don't have a link handy, but post back if needed and I will point you to the odin package I use. Good luck.
Click to expand...
Click to collapse
Thanks...that's exactly what I did, except the backup would never quite "take." It completely loaded and cycled through the boot process, but I ended up on a boot-restore loop. So now I've Odin-ed back to stock with the closest build I could find to my stock (which I don't think is out there yet - FROYO.UVJL6.ULTIMOBILE - do you know anywhere to find it?), rooted, and am searching for a good, stable, battery-friendly mod once again.
s15274n said:
try moving all files to your PC, format your sdcard, reboot, move files back, flash cwr in ROM mgr, backup work? Move critical files back from PC.
Click to expand...
Click to collapse
i did try formatting, then moving all the stuff back and am still getting that same error message
^ what rom are you on, if one?
You could always ODIN, and use my option b cwr in the noob guide. I just tested making a backup using trigger 8/22 and know there are no issues. Not really sure whats up on your end. I will say though, I've emailed koush several times that there is an issue with cwr on the vibrant from rom manager, for some it won't even flash.
phone_noobie said:
i did try formatting, then moving all the stuff back and am still getting that same error message
Click to expand...
Click to collapse
try different sd card..or reinstall CWM...
Hello I am from Argentina, desperately need help.
I rooted my SGSII ICS 4.0.3 phone with CF Root LPJ everything went as expected. Odines PASS! and all but when my phone reboots it just turns off after logo screen with triangle.
I can get into recovery and download mode but that is all.
What should I do?
Might commit suicide if there is no fix.
Flash stock rom.
You can find it at sammobile.com.
elemenofi said:
Hello I am from Argentina, desperately need help.
I rooted my SGSII ICS 4.0.3 phone with CF Root LPJ everything went as expected. Odines PASS! and all but when my phone reboots it just turns off after logo screen with triangle.
I can get into recovery and download mode but that is all.
What should I do?
Might commit suicide if there is no fix.
Click to expand...
Click to collapse
If you can get into recovery and download mode, you are only softbricked. It could be worse.
Please be more precise, I lack experience but I will understand.
Which stock ROM should I flash now?
Because I got a downloaded I9100UHLPS_I9100AROLP4_ARO but it is not LPJ.
I also managed to find Kernel_I9100XXLPJ at intratech. Would flashing this kernel fix it? Could it possibly mess my recovery mode and brick my phone?
Flash the same ROM again using Odin, do not flash the wrong kernel.
ARO is a good ROM, just flash it again, it will boot, then root with the cfroot for that ROM later.
What do you mean by the SAME rom? I got this problem flashing a CF-Root kernel not an entire ROM.
The ROM I had before was ICS 4.0.3 which I upgraded officially via Kies.
Should I flash ICS 4.0.3 UHLPS that is for my region? I9100UHLPS_I9100AROLP4_ARO
I'm pretty sure that's what Atifsh meant, yes.
Thank you all! Thanks given with the button for all!!!
I flashed stock ICS 4.0.3 for my country downloaded from sammobile.com and the phone recovered with no trouble! I got my soft bricked SGSII working again!
Is there anything I need to wipe now to make sure there is no crazy leftover from the CF-Root boot fail?
If it's working fine, then probably not. I mean, you could always backup your contacts, call logs, SMS, etc and your apps with Titanium, do a factory reset, and then restore contacts, call logs, sms and user apps/data only (do not restore system apps or data).
But if it's working fine now, I don't see the point.
I want you to do two things for me tho.
First, get kTool either from Google Play (it's free) or from Hellcat's thread on here. Then backup your EFS. Keep one copy on your external SD card in your phone, and keep another copy on your PC. Then I want you to do a Nandroid backup in CWRecovery.
That way if anything does ever go wrong, you should be able to recover/get up and running again easily without losing your stuff. For example, if your phone ever borked & you had to send it in for warranty service/replacement, you could restore that backup when you get your phone back/a new phone.
Do a backup at least once a week and certainly every single time before you flash a new kernel/rom or if you make major changes to your system.
I am afraid of doing anything with this phone now. First experience = soft brick.
Damn I almost die. Now I need to find a way to get out of this stock 4.0.3 ICS because it is ramming through my battery and is as slow as a potatoe.
4.0.4 is eMMC hard-brick possibly if I wipe after flashing.
Now I feel like an expert.
I also tried flashing cf root today and it softbricked my phone. Weird.... next time I try to root my phone, I wont be using cf root.
Which Kernel was yours? Leave it here logged for future brickers.
Mine was LPJ
Hi!
i need some reasurance from you guys, been coming here for years... always felt quite comfortable while flashing... but, ive never gone back to stock
ive got a galaxy s2, live in germany had a stock EPLUS branded firmware... ive upgraded via kies to 4.0.3... then flashed the siyah kernel for root and other nice things...
yesterday while filming a video at the main river i droped my phone and it has a crack in the glass going from the bottom right corner to about halfway up the left side... phone works, screen and touchscreen work... but its annoying to see it and i have an extra insurance that offers repair if possible and replacement if necesary... so why not take advantage of it? hehe
now the only thing im worried about is, that i have a yellow triangle when booting and im pretty sure the repair guys will complain and refuse to fix it when they see it...
im currently downloading the stock 4.0.3 firmware for my carrier (eplus-germany) from sammobile (388mb)....
my question is: what is the best method of installing that firmware and if i do so, will my data be wiped or is there a way of only re-flashing the stock kernel?
also when the stock kernel is back on my phone, will the yellow triangle go away? oh.. and can the repair guys tell there was a moded kernel on the phone?
k, enough stupid questions, i hope someone finds the time and patience to answer
thx in advance!
cuteness said:
Hi!
i need some reasurance from you guys, been coming here for years... always felt quite comfortable while flashing... but, ive never gone back to stock
ive got a galaxy s2, live in germany had a stock EPLUS branded firmware... ive upgraded via kies to 4.0.3... then flashed the siyah kernel for root and other nice things...
yesterday while filming a video at the main river i droped my phone and it has a crack in the glass going from the bottom right corner to about halfway up the left side... phone works, screen and touchscreen work... but its annoying to see it and i have an extra insurance that offers repair if possible and replacement if necesary... so why not take advantage of it? hehe
now the only thing im worried about is, that i have a yellow triangle when booting and im pretty sure the repair guys will complain and refuse to fix it when they see it...
im currently downloading the stock 4.0.3 firmware for my carrier (eplus-germany) from sammobile (388mb)....
my question is: what is the best method of installing that firmware and if i do so, will my data be wiped or is there a way of only re-flashing the stock kernel?
also when the stock kernel is back on my phone, will the yellow triangle go away? oh.. and can the repair guys tell there was a moded kernel on the phone?
k, enough stupid questions, i hope someone finds the time and patience to answer
thx in advance!
Click to expand...
Click to collapse
Since everything is functional i suggest you to use
Triangle away to remove yellow triangle
Then install Chainfire's mobile ODIN/Nornal PC ODIN and flash your Kernel (zimage from your firmware)
Then take special care to remove all rooted apps to avoid detection ...Now your mobile is stock
ah ok.... thx.... ive seen triangle away program in the forum, so i download that, use it, and triangle is gone... ive used ODIN before when CWM messed up and bricked my phone, to reinstall kernel....
and from the package im currently downloading i flash zimage via ODIN.... sounds easy enough.... download is done in 8min... ill try it and report back
ok, yellow triangle is gone now for the next step
hmmm, downloaed the file.... ive got a big I9100XWLP7_I9100XXLPS_I9100EPLLP5_HOME.tar.md5 file... inside that file ive got various other files, including the zimage..... ive extracted it, but odin only wants .md5 or .tar files..... if i give him the whole file, im assuming it will flash everything, which i dont want... ( or do i? )
and since im only going for the zimage..... in which does it go... pda or phone?
cuteness said:
hmmm, downloaed the file.... ive got a big I9100XWLP7_I9100XXLPS_I9100EPLLP5_HOME.tar.md5 file... inside that file ive got various other files, including the zimage..... ive extracted it, but odin only wants .md5 or .tar files..... if i give him the whole file, im assuming it will flash everything, which i dont want... ( or do i? )
and since im only going for the zimage..... in which does it go... pda or phone?
Click to expand...
Click to collapse
Sorry zimage Has to be either added in a TAR like the one u can get in Siyah thread or to me used as zimage in Mobile odin directly
what if i upload it to my phone and "flash kernel" via CWM? will it accept the file?
cuteness said:
what if i upload it to my phone and "flash kernel" via CWM? will it accept the file?
Click to expand...
Click to collapse
I've never used it but if it has the option it should. You can check afterwards by going to setting->about phone and then looking at the kernel version which should no longer have siyah in the name.
After that, be sure to remove all files that depend upon root access and lastley to remove the superuser app and binary. I'm not entirely sure but I believe that superSU has an option for self cleanup as the last step of the process. I would keep CWM and Titanium backup as my last apps then look for anything installed as root using Titanium backup (aside from superuser and CWM), then uninstall Titanium, reboot into CWM and clear the caches, finally uninstall CWM (delete it at the command line using adb if you know how and also look for other apps you might have missed), and lastly uninstall superuser. SuperSU might have an option to unroot and uninstall itself. I have the paid version so I don't know if the free one has it.
Almost forgot; you'lle want to delete the clockwork mod folders that are created when you do nandroid backups.
Of course it would be easier just to make a nandroid backup, pull it off the phone using adb (or wifi if you're afraid of adb), then just flash that entire md5 or tar file you have and when you get the phone back put the backup on it again and restore from it. If you do it this way you can format your system, data, and cache before pushing the big file on. You would also want to look over the contents of the sdcard and remove anything that would give away the presence of rooted app, for example root explorer extracts things to a folder called speedsoftware or something. Titanium Backup also keeps a folder on the phone and you'de want to remove that.
If you're okay with adb then it would be fine to just do a nandroid backup and then pull the entire contents of /sdcard/ to your computer then remove your external_sd before sending it in... and backing up, Nandroid, to the external_sd would save the time of pulling the data of a nandroid backup from it now that I think of it. If you do this; ensuring you have all your photos, music, etc, then wipe the data, system and cache, you can pretty much remove your external_sd and delete what's on /sdcard/ and push the big file you have using Odin... you just need to make sure you have a backup of everything you've deleted so you can put it all back. To be clear though, a Nandroid backup won't save the contents of your /sdcard/ files. You'de need to do that yourself.
So there's a few scenarios... Good luck, and wait for more advice from others before proceeding in case I missed something.
Hello,
I broke my SII screen, I can not unlock it or see anything anymore. Obvioulsly, I'd like to access to internal storage *but* I did not activate USB debugging, or install any custom rom.
I manage to got to the device with adb, but as the phone is not rooted, I did not manage to mount internal storage in order to pull files from my phone. I also try Kied but I need to unlock the phone to access files.
I search the web and xda but I did not found a working solution (maybe my keywords were wrong).
Does someone has a solution ? For instance, a way just to be root easily on the phone in order to mount Internal storage ? Any other id ?
Thank you very much in advance. Doms.
PS: I do not want to change the screen as the price for the screen is too high. I do not have access to another SII phone in order to plug its screen on my mother board.
Flash a custom kernel/root the phone/get CWM, then find someone who uses the version of CWM that comes with that kernel to walk you through doing a nandroid backup (how many button presses to get through menus, etc) ?
MistahBungle said:
Flash a custom kernel/root the phone/get CWM, then find someone who uses the version of CWM that comes with that kernel to walk you through doing a nandroid backup (how many button presses to get through menus, etc) ?
Click to expand...
Click to collapse
Thank you for your answer. I'd like to install CWM but is it possible without putting the phone in debug mode ? How can I put the file on the phone as I can not mount storage under adb ?
Thenk you for your help.
Doms.
You can flash a custom kernel via Odin (like Siyah) in download mode, the file you're flashing is on your PC, not on the phone, and this will root your phone and install CWM at the same time. All you need to know beforehand is what Android version you currently have on the phone so you choose the right build to flash, otherwise you'll end up with bootloop.
Search for the Siyah threads on here & read to work out which build you need to flash.
MistahBungle said:
You can flash a custom kernel via Odin (like Siyah) in download mode, the file you're flashing is on your PC, not on the phone, and this will root your phone and install CWM at the same time. All you need to know beforehand is what Android version you currently have on the phone so you choose the right build to flash, otherwise you'll end up with bootloop.
Search for the Siyah threads on here & read to work out which build you need to flash.
Click to expand...
Click to collapse
Thank you again. Will try to get in download mode (more difficult than recovery as I need to validate at some moment without screen, adb do no want to do it as the phone is not rooted).
One last question: will it erase the internal storage or not?
Best regards. Doms.
If you have problems getting into DL mode, order a jig, or try the thread in General section where people have offered to lend their jigs to people nearby; might be someone near you who has one (not sure if the thread is still updated, but worth a look).
No, flashing a custom kernel will only do exactly that, replace your stock kernel with the custom kernel & your stock recovery with CWM, nothing else is touched.
Edit - The end result of this will be a nandroid backup, and you'll still have to get your data out of that. The easiest possible way will be to find someone else with an S2, restore your backup to their phone, get your data, and then have that person restore their setup. You can pull data from a nandroid (with just a PC), but it can be a bit fiddly if you've never done it before. We'll cross that bridge once you actually have a backup though.
MistahBungle said:
If you have problems getting into DL mode, order a jig, or try the thread in General section where people have offered to lend their jigs to people nearby; might be someone near you who has one (not sure if the thread is still updated, but worth a look).
No, flashing a custom kernel will only do exactly that, replace your stock kernel with the custom kernel & your stock recovery with CWM, nothing else is touched.
Click to expand...
Click to collapse
Thank you for all. I just DL the kernel, will try this evening.
Doms.
You're welcome Good luck, post here when you've flashed it/if you have problems.
Hello,
Just to thank you again. I just have time to try it and it works fine ! Get and remove my 2 Gb of photo from my old phone.
Best regards. Doms.
No worries. Nice work, glad you got your data