Hey guys
Just to let u know. Today I got Jelly Bean official update, on official unbranded phone in UK with original untouched software and after few hours phone got completely dead !!
Maybe wait with your update until more info will appear around UK.
oucccccch that sucks. did ya update through kies or OTA update via phone. If you have a rooted phone and attempted to update OTA it will fail. kies shouldn't give ya that issue.
If your phone is still running stock rom and zero binary counts. take it to Sammy store somewhere.
EDIT: remember if your phone is rooted you can always go to download mode and flash any Rom via Odin. it's not a problem.
hero000 said:
oucccccch that sucks. did ya update through kies or OTA update via phone. If you have a rooted phone and attempted to update OTA it will fail. kies shouldn't give ya that issue.
If your phone is still running stock rom and zero binary counts. take it to Sammy store somewhere.
EDIT: remember if your phone is rooted you can always go to download mode and flash any Rom via Odin. it's not a problem.
Click to expand...
Click to collapse
unfortunately my phone was pure untouched like a virgin, no nothing, even rooting. coz I had to many problems in the past. It was OTA update.
phone is completely gone. no reaction for nothing
eljon said:
unfortunately my phone was pure untouched like a virgin, no nothing, even rooting. coz I had to many problems in the past. It was OTA update.
phone is completely gone. no reaction for nothing
Click to expand...
Click to collapse
Call your carrier and complain! If its all stock then u should have no issues having them repair or replace it for u...
.:Sent from the Hellfire Galaxy of S & 3:.
da-pharoah said:
Call your carrier and complain! If its all stock then u should have no issues having them repair or replace it for u...
.:Sent from the Hellfire Galaxy of S & 3:.
Click to expand...
Click to collapse
I will definitely go tmrw. I hope it's very very rare case.
If you are one of those people who can't be bothered to waste 2 weeks on repair, you could try using a Jig. Thus hopefully allowing you to boot into download mode, and flashing stock firmware with Odin.
bortak said:
If you are one of those people who can't be bothered to waste 2 weeks on repair, you could try using a Jig. Thus hopefully allowing you to boot into download mode, and flashing stock firmware with Odin.
Click to expand...
Click to collapse
I will not try something I have no much idea about. I want to save that phone in perfect shape and sell.
in that case take it to sammy store. enjoy few days with crappy phone that they give you while your phone get fixd.
hero000 said:
in that case take it to sammy store. enjoy few days with crappy phone that they give you while your phone get fixd.
Click to expand...
Click to collapse
I bought it in Carphone W. I hope they give some replace crap My first time without smartphone since Xperia 1 !!!!! WOW
What are the symptoms? My first s3 shut off whole charging the other day and never turned back on. Had to get a replacement.
Sent from my GT-I9300 using xda app-developers app
tawheed12 said:
What are the symptoms? My first s3 shut off whole charging the other day and never turned back on. Had to get a replacement.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Sounds the same to me. In the morning I got OTA JB. I was charnging it in the evening. I think last time when I unlocked it and texted was around 11pm, and then after midnight no response. I took battery out for a minute. But nothing, no any sign, even after I plugged in. Nothing.
Recovery Mode
Try to boot into recovery mode. Turn phone off by taking out battery, put it back then press and hold(in the following order) volume down+home bottom+power, remember to keep them press until you see a screen that shows a yellow triangle with a warning sign, release all bottoms and press volume up. Them you will see recovery menu. If you can boot in recovery you are in luck and is something you can fix yourself with Odin 3.07 and a stock rom.
PR_Grim said:
Try to boot into recovery mode. Turn phone off by taking out battery, put it back then press and hold(in the following order) volume down+home bottom+power, remember to keep them press until you see a screen that shows a yellow triangle with a warning sign, release all bottoms and press volume up. Them you will see recovery menu. If you can boot in recovery you are in luck and is something you can fix yourself with Odin 3.07 and a stock rom.
Click to expand...
Click to collapse
tnx mate for that. Of course I know recovery mode. but no, nothing, phone is absolutely dead like stone.
eljon said:
tnx mate for that. Of course I know recovery mode. but no, nothing, phone is absolutely dead like stone.
Click to expand...
Click to collapse
Even charging does not work? Try taking out battery for a longer time and check again.
DoppelgängerGER said:
Even charging does not work? Try taking out battery for a longer time and check again.
Click to expand...
Click to collapse
even charging, no LED. I did try to take batt out for longer. Today I'm going to Carphone W to say what they can do about it.
Related
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
I have the same problem.
Have you found a solution?
zongamin said:
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
Click to expand...
Click to collapse
Hey!
Dose you RESET FACTORY SETTINGS and FORMAT CACHE in recovery, before flashing with ODIN?
CHEERS!
Did the light lit when you entered the download mode? That's the indicator.
I got the same proble, tried several firmwares with odin but, when the phone reboots it starts flashing again
Hey!
You all, try THIS one.
CHEERS!
casiocas said:
Hey!
You all, try THIS one.
CHEERS!
Click to expand...
Click to collapse
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
moe_szislack said:
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
Click to expand...
Click to collapse
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
casiocas said:
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
Click to expand...
Click to collapse
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
moe_szislack said:
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
Click to expand...
Click to collapse
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
casiocas said:
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
Click to expand...
Click to collapse
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
moe_szislack said:
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
Click to expand...
Click to collapse
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
casiocas said:
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
Click to expand...
Click to collapse
Ok, Thank you
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
misterio_mr111 said:
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
The same thing happens to me, Anybody has any idea?
Just send it to the service center.
No other recovery method is know.
I have been in every forum arond for this kinda brick and there is no solution for YOU to do. Also there is absolutely no way for Samsung to see either say that after the first boot the battery went dead and it never started again. It will be covered by your warranty and brand new ace! Now dont go making stupid mistakes again hope i helped
Sent from my GT-S5830 using XDA App
Apk/sim bricked my phone.
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
BLZBud said:
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
Click to expand...
Click to collapse
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
moe_szislack said:
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
Click to expand...
Click to collapse
Even Samsung don't have an easy way to repair it, hence they replace the mainboard to fix the issue.
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Robbey said:
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Click to expand...
Click to collapse
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
well... if you've tried "every" (its not like there are a lot) button combination... then just go buy a jig from ebay and force it into download mode...
Matriak31 said:
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
Click to expand...
Click to collapse
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
anyone else seeing an increase in the "i bricked my phone" threads?
dont think its coincidence they are increasing after the american variants have been released. People need to check what model they have before flashing things.
OP: not saying thats what has happened to you as you dont say if you have the i9100 or not, hopefully you do.
bruflot said:
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Matriak31 said:
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Click to expand...
Click to collapse
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
bruflot said:
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
its ok and same goes by my post as well buddy..we all been in his position one way or the other
1st - Your phone is not bricked if it show an image. Whatever image it is. The only real software way to brick your phone is to flash bad bootloader or stop a bootloader while they are being flashed. However, Bootloader are flashed first. So if your phone stoped half way, you should not have trouble too much.
Remove the battery from your phone for like a minute, then reboot your phone in download mode (vol- + home + power and when the phone light up, release power.) Then flash another rom from odin.
Also, what rom did you used ? If you flashed a rom for another phone, then you might have flashed bootloader for that phone on yours, which is bad. In this case you will surely need a JIG.
sorry im new to this whole rooting/flashing thing. i downloaded the lightning rom: http://forum.xda-developers.com/showthread.php?t=1095274
i have never rooted or doneanthing to my s2 before. all i did was follow the instructions on the page and thought it would be all good? it froze about a quarter of the way there in odin so i just took my phone out.
I usually find from this state I can get back to bootloader or download states
push and hold vol+ and home then power for bootloader
push and hold vol- and home then power for download
sometimes the phone can seem to freeze a little or even die (this happened to me loads on the galaxy s and once already on the s2) and removing battery sim etc or attaching the charger can jog it
however as other have said a JIG is your friend if for no other reason that even if you recover without it, custom roms up the rom count which some twitchy carriers might invalidate your warranty for, the jig will reset this
you can get them from ebay for less than £3 delivered, or there are instructions on this site for making them yourself if you are so inclined.
simply search 'galaxy s2 jig' on ebay mine was delivered today from portugal as I am way too lazy to make one and only wanted a counter reset anyway
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
hey guys
I have been using Siyah Kernel on my SGS2 for a wile now so I decided to put it on my brothers 1 day old SGS3 and when I try to flash it in CWR I got an errror saying zip could not be flashed and when I rebooted the phone all I got was a Black screen. I've tried everything but the phone wont boot and I cant get in to download mode or CWR.
Any one have any ideas before I go back to the store and play dumb ?
Use Odin and reflash your kernel of choice.
Sent from my GT-I9300 using xda app-developers app
goul0080 said:
hey guys.....
Click to expand...
Click to collapse
Do you download from here: http://www.gokhanmoral.com/
For help: try reboot "bootloader"
http://forum.xda-developers.com/showthread.php?t=1684535
Thanks...?
x111 said:
Do you download from here: http://www.gokhanmoral.com/
For help: try reboot "bootloader"
http://forum.xda-developers.com/showthread.php?t=1684535
Click to expand...
Click to collapse
ApophisXP said:
Use Odin and reflash your kernel of choice.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
goul0080 said:
I've tried everything but the phone wont boot and I cant get in to download mode or CWR.
Click to expand...
Click to collapse
Thanks for the help, but as I said. I only get a black screen I cant get in to download mode or CWR.
If you can't go into download mode you won't be able to repair anything...
If you have an USB jig, it should work on S3 to go to download mode
I figured...
9lum9u66ing said:
If you can't go into download mode you won't be able to repair anything...
Click to expand...
Click to collapse
Kinda sucks
My brother came home with the phone yesterday. I put CWR on it then rooted it and all was fine. I figure I could throw the siyah kernel on it and install a second rom for him to try out.... I have been doing this stuff on my SGS1 and SGS2 for years and never had this problem. But I guess that's it. I ordered a jig on ebay just in case they wont take the phone back at the store. I guess a mod can close this thread if there is nothing else to try.
Thanks for everyone's time....
Strange, the kernel and download mode are at completly different places.
Breaking the kernel, fine. But breaking downlad mode access?
It worked for others already, so please try:
- power off the phone
- remove usb-cable if attached
- pull battery for 30seconds
-press and hold vol-down and Home button. (the latter in the centre)
- press power until the logo appears
Does it still not go to download mode?
USB jigs are pretty easy to build yourself if you have ever used a soldering iron. So if you're like me, you won't wait for the ebay-seller to deliver =)
Sent from my GT-I9300 using xda premium
I Have tried everything possible with the 3 button combo and cant get in to download mode. Pull battery for up to 5 minutes, USB in, USB out, everything I can think of. I cant even get to the LOGO. The red light might come on for a few seconds but nothing at all on the screen.
And all I did was:
Flash the CWR in download mode with odin, reboot(everything worked fine)
Flash su-root zip in CWR, rebooted(everything worked fine)
Made a Backup in CWR, rebooted(everything worked fine)
Flash SiyahKernel S3 zip in CWR, then got an error saying zip was not installed, rebooted and could not get boot logo, download or CWR
ask karnel maker just see weather he can help u out. as might be he knwing case of this ..
Sent from my GT-I9300 using xda premium
Go to eBay and get yourself a USB jig. very cheap and will put your phone into download mode.
Sent from my GT-I9300 using xda app-developers app
It might be a stupid question but is there any charge in the battery?
Sent from my GT-I9300 using Tapatalk 2
On the way
ApophisXP said:
Go to eBay and get yourself a USB jig. very cheap and will put your phone into download mode.
Click to expand...
Click to collapse
I had one on the way 2 minutes after Couldn't get in download mode.
corrsea said:
It might be a stupid question but is there any charge in the battery?
Click to expand...
Click to collapse
I have a dock charger for extra batteries and it shows full charge on the dock.
This same thing just happened to me.
I dont have internet at my house i only always use my phone. I read about the siyah kernal and decided to flash it this morning hoping that i could get hotspot to work. I did it through CW and now the screen just stays black. I got the same warning msg with a andy on his back and a red triangle. It was fine before and working normally. I had a stock firmware and the only thing that i changed about the phone was rooting it through odin. Now i'm screwed because i never had this issued with any phone and i'm tempted to take it back to best buy and blame them. I had soft bricked it about 4 days ago but i was able to fix it in a few mins after searching xda. When the phone is plugged in to the computer it does make a connection sound but the device name is not my phone. Someone point me in the right direction
ajd2416 said:
I dont have internet at my house i only always use my phone. I read about the siyah kernal and decided to flash it this morning hoping that i could get hotspot to work. I did it through CW and now the screen just stays black. I got the same warning msg with a andy on his back and a red triangle. It was fine before and working normally. I had a stock firmware and the only thing that i changed about the phone was rooting it through odin. Now i'm screwed because i never had this issued with any phone and i'm tempted to take it back to best buy and blame them. I had soft bricked it about 4 days ago but i was able to fix it in a few mins after searching xda. When the phone is plugged in to the computer it does make a connection sound but the device name is not my phone. Someone point me in the right direction
Click to expand...
Click to collapse
as above. Jig to download mode. Then flash your kernel of choice via Odin.
Sent from my GT-I9300 using xda app-developers app
Maybe this will work out???
This is the one I'm looking at on amazon
http://www.amazon.com/Aftermarket-D...cement/dp/B005UUCT0Y/ref=cm_cr_pr_product_top
I'm not new to flashing and root but i am new to samsung devices. I dont know what would be a good kernel nor how to use a usb jig.
I dont know what would be a good kernel
Click to expand...
Click to collapse
That would actually be Siyah. But you don't seem to like it anymore after having it brick your phone *g*
nor how to use a usb jig.
Click to expand...
Click to collapse
Pull the battery for 30 seconds, plug it back in. Then plug in to USB jig and within 5 seconds your phone has automatically turned on an gone to Download mode.
NOTE: Some suppliers sell ****ty Jigs with a too high tolerance value of the resistance. These DO NOT work on the S3 even if they worked on the S1/S2.
I had one on the way 2 minutes after Couldn't get in download mode.
Click to expand...
Click to collapse
@goul0080: Please if possible measure the resistance between pin3 and pin5 of the Jig. It should be 301kOhm +- 1% tolerance. Anything between 1 and 5% may n or may not work.
If the phone still doesn't work you should check for a repair shop around you. They can use JTAG (direct access to the flash storage and other system compontents) to flash the ROM and you should be good to go again. Usually costs around 20$ afaik.
ajd2416 said:
This is the one I'm looking at on amazon
http://www.amazon.com/Aftermarket-D...cement/dp/B005UUCT0Y/ref=cm_cr_pr_product_top
I'm not new to flashing and root but i am new to samsung devices. I dont know what would be a good kernel nor how to use a usb jig.
Click to expand...
Click to collapse
looks like mine didn't read it fully but yeah. Basically pull battery to make sure phone is off. Give it a few secs then stick battery back in. Then stick in the jig. Phone autoboots into download mode.
Sent from my GT-I9300 using xda app-developers app
goul0080 said:
hey guys
I have been using Siyah Kernel on my SGS2 for a wile now so I decided to put it on my brothers 1 day old SGS3 and when I try to flash it in CWR I got an errror saying zip could not be flashed and when I rebooted the phone all I got was a Black screen. I've tried everything but the phone wont boot and I cant get in to download mode or CWR.
Any one have any ideas before I go back to the store and play dumb ?
Click to expand...
Click to collapse
Did u use the same Siyah Kernel SGS2 on SGS3 or u downloaded SGS3 Siyah Kernel
When I get the jig
iraqi4ever80 said:
Did u use the same Siyah Kernel SGS2 on SGS3 or u downloaded SGS3 Siyah Kernel
Click to expand...
Click to collapse
Read the subject of the post...
"Brick SGS3 SiyahKernel S3 (stable v1.2.6) help ?"
d4fseeker said:
@goul0080: Please if possible measure the resistance between pin3 and pin5 of the Jig. It should be 301kOhm +- 1% tolerance. Anything between 1 and 5% may n or may not work.
If the phone still doesn't work you should check for a repair shop around you. They can use JTAG (direct access to the flash storage and other system compontents) to flash the ROM and you should be good to go again. Usually costs around 20$ afaik.
Click to expand...
Click to collapse
I don't have anything to measure the Ohm, sorry. Also the closest Phone repair shop is about 9 hours drive, no joke. I am on a island in Canada and I have to drive about an our just to get to a small crappy walmart haha.
Hi all, I have tried to unlock my galaxy S3 gt i 9300, which is locked to O2 UK. I live in Ireland and bought the phone from a guy on e bay. I got the unlock code from two different sources and both are the same, but neither will unlock the phone, I have tried the unfreeze code too but it gets me nowhere. Entering the keyboard codes does not work either. The firmware baseband version which is on the phone at present is I9300XXUGMK6, the build number is JSS15J.I9300XXUGNA5, I feel that if I can get the phone back to it's original O2 UK firmware then I might be able to unlock the thing. My problem is that I have found I9300XXALE8_I9300O2UALE5_O2U to be the original firmware, but the link to it from every site is dead and I cannot download it, all the links were to hotfile and we all know what became of it. If anyone has any other suggestions as to how I might unlock my phone then I would be more than happy to try them.
Best wishes Wez
Flash the latest o2u, root it with cf autoroot, nvdata unlock method. Do not attempt to go back from 4.3 as you will half cabbage your phone. The efs changed.
Sent from my GT-I9300 using Tapatalk
shivadow said:
Flash the latest o2u, root it with cf autoroot, nvdata unlock method. Do not attempt to go back from 4.3 as you will half cabbage your phone. The efs changed.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Many thanks I will try that now and let you know how I get on, though the guy I got the second code from tells me the phone should not be rooted, if it is he says that the code will not work. But anything is worth a try so I will try it before I root the phone.
Thanks again best wishes Wez
kerrywez said:
Many thanks I will try that now and let you know how I get on, though the guy I got the second code from tells me the phone should not be rooted, if it is he says that the code will not work. But anything is worth a try so I will try it before I root the phone.
Thanks again best wishes Wez
Click to expand...
Click to collapse
At the risk of sound stupid, I am going to ask one question, where do I find said latest stock ROM for my O2 UK S3, because all the ones I find are not on any link that works, they nearly all try to send me to hotfile, would seem that nobody has taken the trouble to put up any mirror download links, which has left me very frustrated. Hope someone can please point me in the right direction, because I have a phone which is of no use to me.
Best wishes and good luck Wez
kerrywez said:
At the risk of sound stupid, I am going to ask one question, where do I find said latest stock ROM for my O2 UK S3, because all the ones I find are not on any link that works, they nearly all try to send me to hotfile, would seem that nobody has taken the trouble to put up any mirror download links, which has left me very frustrated. Hope someone can please point me in the right direction, because I have a phone which is of no use to me.
Best wishes and good luck Wez
Click to expand...
Click to collapse
here
may require registration
spamtrash said:
here
may require registration
Click to expand...
Click to collapse
Many thanks am downloading the latest rom from there now, hopefully this will do the job. I will not be able to try it till tomorrow morning as it is very slow downloading, but I can leave it all night and use Odin to flash the phone.
Good luck Wez
Samsung updates are always on slow hosts. It costs a lot of money to hire server space and free hosts that do over a Gb is as rare as hens teeth.. how did you get on?
Sent from my GT-I9300 using Tapatalk
Many thanks to all who helped with my problem, I managed to get my s3 unlocked, just need to get it rooted now and get rid of the stupid thing keeps going to safe mode when booted normally, but if I boot whilst holding the home key (the middle one at the bottom) then the phone will try to boot into download mode, I then hit the volume down button and hole the home key again, this time the phone reboots itself and will boot into a non safe mode. Though this is not ideal and someone needs to find a cure for this, it is better than nothing. Tried to flash the resurrection remix ROM, but it stopped when a bit was done and failed will try some other custom ROM when I get the chance, at the moment my phone is keeping going back to the recovery screen.
Will let you know what happens, best wishes Wez
kerrywez said:
Many thanks to all who helped with my problem, I managed to get my s3 unlocked, just need to get it rooted now and get rid of the stupid thing keeps going to safe mode when booted normally, but if I boot whilst holding the home key (the middle one at the bottom) then the phone will try to boot into download mode, I then hit the volume down button and hole the home key again, this time the phone reboots itself and will boot into a non safe mode. Though this is not ideal and someone needs to find a cure for this, it is better than nothing. Tried to flash the resurrection remix ROM, but it stopped when a bit was done and failed will try some other custom ROM when I get the chance, at the moment my phone is keeping going back to the recovery screen.
Will let you know what happens, best wishes Wez
Click to expand...
Click to collapse
To get out of the recovery boot lock I had to leave the phone with the battery out of it for about 5 minutes, I was then able to get into download mode, by booting with the volumes down and home buttons held. I then used Odin to reflash the stock firmware again, which it did OK.Then I needed to root the phone again so I did that. I then downloaded the Android Revolution DH-SGS3, moved it to the external SD card, rebooted into recovery and flashed it to the phone, but again the phone went into it's crazy recovery boot loop, at the moment I have the battery out of kit and will try replacing it now and booting into the new ROM. It appears to be booting into the rom now, it has been on the Samsung screen for a while now and I am hoping that it will boot into the rom given a little time, this being it's first boot. OK all booted up OK, the only problem that remains is the bleeding thing booting into safe mode, but lots of people have got that.
Happy days, best wishes Wez
I have never encountered that issue before. When exactly did the boot issue start?
Glad you got this far!.
Sent from my GT-I9300 using Tapatalk
shivadow said:
I have never encountered that issue before. When exactly did the boot issue start?
Glad you got this far!.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
The boot issue started after I had tried to flash with another rim, which I feel was not fully downloaded, at any rate the flash was abandoned and when I went back through the options and hit the reboot now, it went into the loop. I had to remove the battery and leave it out for about 5 minutes, less might have done, when I reinstalled the battery, I went into download and using Odin flashed the phone with a stock rom and rooted it, then I flashed the android revelation rom, the phone again got stuck on the loop, this time I took the battery out the phone and left it, again for about 5 minutes, then replaced the battery and hit the power button and the phone booted into the rom, after a few minutes. I have been using this rom for a while now, but have noticed that for some reason the sound, for everything goes of completely, nit found a cure for that yet, but I am downloading the Echoe rom now, it will soon be finished, and I am going to flash it as soon as I can. I have the Echoe rom on my SGS4 and like it very much. I shall let you know if I have the same problem with this rom, when I flash it, the loop that is.
Best wishes Wez
kerrywez said:
The boot issue started after I had tried to flash with another rim, which I feel was not fully downloaded, at any rate the flash was abandoned and when I went back through the options and hit the reboot now, it went into the loop. I had to remove the battery and leave it out for about 5 minutes, less might have done, when I reinstalled the battery, I went into download and using Odin flashed the phone with a stock rom and rooted it, then I flashed the android revelation rom, the phone again got stuck on the loop, this time I took the battery out the phone and left it, again for about 5 minutes, then replaced the battery and hit the power button and the phone booted into the rom, after a few minutes. I have been using this rom for a while now, but have noticed that for some reason the sound, for everything goes of completely, nit found a cure for that yet, but I am downloading the Echoe rom now, it will soon be finished, and I am going to flash it as soon as I can. I have the Echoe rom on my SGS4 and like it very much. I shall let you know if I have the same problem with this rom, when I flash it, the loop that is.
Best wishes Wez
Click to expand...
Click to collapse
The Echoe ROM flashed without any further loop and to my surprise the phone did not boot into safe mode, so an improvement there, with both. But the sound is still a problem. I have since the first boot had to reboot several times and the damned thing is back to the bloody safe mode. To get round it now I have to hold the volume down, the home and power keys, to take me to the screen for download, when there I push the volume down and the phone goes to reboot, in it's own, while it is doing that I hold the home button, the phones boots without going into safe mode. I have tried to do it the way I was before, but it is not working that way now, so got to go down the way of booting into the download screen, but at least it works.
Very best wishes and good luck Wez
Interesting.. it would seem that the issue lies with custom roms. Which recovery are you using? Cwm 6032 is a good recovery to start with, moving on to 6047. I had issues with twrp.
Sent from my GT-I9300 using Tapatalk