i think i have a problem with my phone i switched off my phone after very long time but now when i restarted it agian i am noticing that my phone light automatically on (like when we press the home or power button to unlock) and then if i dont touch it in sec or 2 off it keep happening as phone is on desk in front of me i dont understand what the problem help please
grown ups said:
i think i have a problem with my phone i switched off my phone after very long time but now when i restarted it agian i am noticing that my phone light automatically on (like when we press the home or power button to unlock) and then if i dont touch it in sec or 2 off it keep happening as phone is on desk in front of me i dont understand what the problem help please
Click to expand...
Click to collapse
Have you tried doing a factory wipe? Flash a new firmware?
Also, speak English. I barely understood what you wrote.
I have the same thing.
Screen goes on automatically with ALL versions of ICS or JB.
Only with Gingerbread roms screen is OK.
What's different between GB and ICS/JB.
Is this a kernel problem, or a ROM problem??
Currently on Slim bean rom
Related
hope anyone knows the answer!!
my phone (TMOUSA) is not unlocking after it goes on standby.
i had try 3 different ROMs and it still doing the same, task 29 on every flash,
one of them the 3.14 TMOUS stock ROM tried 2.15 and 2.14 radios and nothing
if i do a soft reset it will boot up ok and i can play with the phone an do calls and all but when it goes on standby and and try to unlock (seeing the actual unlock screen and slider) it do nothing, like the screen isn't working or unresponsive to touch
*battery pins ok
*powered phone without sim and without storage card but still doing the same thing
any ideas???
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
kawazaki said:
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
Click to expand...
Click to collapse
the firs link is the only one with the same problems im having, touch screen works but not after it goes on standby or if the phone go on standby by it self and i press any other bottom (not the end bottom) it will still works
everyone thinks is a hardware thing but how is the touch screen actually working for me? not like second link where the touch don't work at all
mine works but if i press the end key to make it go standby and press it again it become unresponsive, but if it goes to stand by by itself and i press any other key it will still works
well.... i guess we'll never know
probably my hd2 will go to the broken i might use it to fix any other thing drawer
Aaah.. FML
I just woke up, and ive got the same problem...
Can some1 help me where i can find the stock rom for vodaphone??
im gonna bring it back
Well,my U20i (x10 Mini Pro) have using a custom Rom for a long time and it is really great....until one day (this post date) my phone turn off by me because I want to conserve the battery,and then when I want to turn it on,it vibrate (with no light) and I can see the LCD displaying a very ultra low light level of screen (same like phone won't boot screen) so I reflash it again using the Rom I like but not work... :'(
I'm now try to recover my phone using Update Service aka SEUS right?And can someone give me other way to fix this problem?Also my accelerometer seems not working/functioning when this problem occur...yesterday everything was great but this day the problem occured...
Have you try the factory reset? Long ago my E10i can't use the WiFi, when i turn it on there's no hotspot detected and after 5 second it turn off automatically, even if i try to flash the ROM again, the problem still occur... Until i do the factory reset, it's working normally again... Just give it a try ,well if you don't mind to lose your apps...
Satan_Disciple said:
Have you try the factory reset? Long ago my E10i can't use the WiFi, when i turn it on there's no hotspot detected and after 5 second it turn off automatically, even if i try to flash the ROM again, the problem still occur... Until i do the factory reset, it's working normally again... Just give it a try ,well if you don't mind to lose your apps...
Click to expand...
Click to collapse
Well I install a fresh stock rom and it looks like the power button and the system got a little problem and I don't know why
The problem is like this now even the stock rom is flashed :
1.Stock rom flashed
2.Turning on the phone using switch power,the phone vibrate,and no Sony Ericsson word come up
3.The phone then have a notification sound (sounds like setting notification) even the phone screen is power off
4.I take out the battery,and then wait 30 seconds,and insert the battery
5.I plug in charger,the phone on with showing battery icon,I press the power button and the phone on
That's the problem...about the power button and boot up screen :'(
UchihaDareNial said:
Well I install a fresh stock rom and it looks like the power button and the system got a little problem and I don't know why
The problem is like this now even the stock rom is flashed :
1.Stock rom flashed
2.Turning on the phone using switch power,the phone vibrate,and no Sony Ericsson word come up
3.The phone then have a notification sound (sounds like setting notification) even the phone screen is power off
4.I take out the battery,and then wait 30 seconds,and insert the battery
5.I plug in charger,the phone on with showing battery icon,I press the power button and the phone on
That's the problem...about the power button and boot up screen :'(
Click to expand...
Click to collapse
if I understood, your phone boot but the display doesn't turn on.
since seems like this happen since turning the phone on. we can say that for some reason the screen isn't responding. so... you can try to reflash it again and see it that help in something.
the worst could be that the screen got damage in some way.
If i were you,I would reflash stock from via SEUS. And then see what happens. I only hope that it isn't a hardware issue
Sent from my U20i using xda premium
It sounds to me that your battery was just too low... You turned it off to conserve battery and then when you turned it on it gave you a notification sound...
it does that when it wants to turn off because of low battery...
just let it charge, i don't think it's much of a problem.
Well I flashed a stock Rom and the problem still occur...accelerometer doesn't work and phone display isn't on when boot (but the phone is on,yeah it is on just display have no light)
Sent from my SK17a using xda premium
Hi, so, I have my SGS3 for almost a week now. Using Omega v27 and enjoying every second of it.
One thing bothers me (besides the dialer ) - it takes the phone a good 2 seconds to turn on when i press the power button. I'm not talking about restarting itself. I'm talking when the phone is on, there is no app running, and i lock it. Clicking the power button should bring up the unlock screen, but it takes a whooping 2 seconds for it to turn on.
On my previous Galaxy Mini, it was instant.
Is there any way to fix it?
Egozy said:
Hi, so, I have my SGS3 for almost a week now. Using Omega v27 and enjoying every second of it.
One thing bothers me (besides the dialer ) - it takes the phone a good 2 seconds to turn on when i press the power button. I'm not talking about restarting itself. I'm talking when the phone is on, there is no app running, and i lock it. Clicking the power button should bring up the unlock screen, but it takes a whooping 2 seconds for it to turn on.
On my previous Galaxy Mini, it was instant.
Is there any way to fix it?
Click to expand...
Click to collapse
I have the same problem on every S3 i have ever used in my hands.
Its called "wake up lag"... 1.5-2s - its normal and I hate this so much!!!
It´s the time samsung need to wake up modem and so on after going to deep sleep (5s after switching off). You can download some software tools to prevent deep sleep, but its not battery friendly...
Its not a software problem - its a hardware problem - No... its a Samsung problem.
xbpv060 said:
I have the same problem on every S3 i have ever used in my hands.
Its called "wake up lag"... 1.5-2s - its normal and I hate this so much!!!
It´s the time samsung need to wake up modem and so on after going to deep sleep (5s after switching off). You can download some software tools to prevent deep sleep, but its not battery friendly...
Its not a software problem - its a hardware problem - No... its a Samsung problem.
Click to expand...
Click to collapse
I have never had that problem. I really have no solution apart from a wipe but it definitely seems a issue as I have never faced it.
Sent from my GT-I9300
This is not a problem.
It was there in my S2 after ICS update.
It is present in S3 also and it takes a second before lock screen appears after pressing power or home key.
you have to live with this.
It's Samsung's 'wakeup lag' that seems to appear in every one of their Android phones.
No way to get rid of it other than to flash AOSP/AOKP roms I believe.
Hey all, mods please delete my other thread as this will sum it up..
Hey devs, I'm facing a strange issue, really strange, I've been flashing roms for 2 years and never faced anything like this..:
It's all about the power button.. whenever I hold it, it doesn't show the options "reboot, turn off, airplane mode".. NO, it just turns off immediately..
The other strange thing:
If I turned screen off, it doesn't even make the sound "tick", and even if I put a password or any lock likd "slide" it doesn't make any affect.. screen is all open..
What the heck is wrong with my phone? Is it a curse
This could be a Unclean Flash and/or The Mainboard of you S2 is f***ed up
Try a other Rom and if it still acts wierd do the Whole Procedure with Reflashing an Original Sammy Rom via odin + Fullwipe and everything
Ofcourse the Powerbutton only could be the Problem (It doesnt release properly anymore)
screamwork said:
Hey all, mods please delete my other thread as this will sum it up..
Hey devs, I'm facing a strange issue, really strange, I've been flashing roms for 2 years and never faced anything like this..:
It's all about the power button.. whenever I hold it, it doesn't show the options "reboot, turn off, airplane mode".. NO, it just turns off immediately..
The other strange thing:
If I turned screen off, it doesn't even make the sound "tick", and even if I put a password or any lock likd "slide" it doesn't make any affect.. screen is all open..
What the heck is wrong with my phone? Is it a curse
Click to expand...
Click to collapse
I have posted a solution on your other op mate.
Will you stop making threads ?
Hi!
I installed "U20_nAa-14_2.6.29.6-nAa-14" and "MiniCM7-2.2.1-mimmi" on my phone. The mobile network didn't worked, so I tried closing back the bootloader. I made it with "s1tool relock.exe", and it really closed it back. The instructions I followed while doing it, said that I shouldn't start the phone after doing the relocking and disconnecting it from the computer. Accidentally I switched it on, and now it won't turn on. Only the startup vibration and green led flash. If I connect it to the computer it keeps connecting and deconnecting, I don't know how to open up the bootloader again if it's possible at all.
Is it repairable?
Thank you for your help.
Rodage said:
Hi!
I installed "U20_nAa-14_2.6.29.6-nAa-14" and "MiniCM7-2.2.1-mimmi" on my phone. The mobile network didn't worked, so I tried closing back the bootloader. I made it with "s1tool relock.exe", and it really closed it back. The instructions I followed while doing it, said that I shouldn't start the phone after doing the relocking and disconnecting it from the computer. Accidentally I switched it on, and now it won't turn on. Only the startup vibration and green led flash. If I connect it to the computer it keeps connecting and deconnecting, I don't know how to open up the bootloader again if it's possible at all.
Is it repairable?
Thank you for your help.
Click to expand...
Click to collapse
Flash THIS with flashtool. The download is about 213 MB, although it may say differently when downloading, just wait till it's finished.
It's original Sony Ericsson Firmware and can be flashed on a device with a locked bootloader. Not sure about the version, although it says 2.1.1.A.0.6, it may be older, but i don't have a U20, so I can't check. It should be possible to upgrade it with Sony Update Service if it's an older version. Good luck.
Thank you!
It worked. Can I ask that too, is there a safest way to solve the no network problem?
Rodage said:
Thank you!
It worked. Can I ask that too, is there a safest way to solve the no network problem?
Click to expand...
Click to collapse
Depends on your simlock certificate or how your phone was unlocked from it's original network. There are two or three methods (msm_7227_semc, msm_7227_setool2, and maybe one for omnius too) , just try them and check if you get a signal before you flash any custom firmware. If you don't get a signal, relock it again and try a different method.
Flashtool used to be quite good at figuring out which method worked best, but I don't know if that still supports unlocking 2010 devices. I've got 0.9.13 and there is a BLU (Bootloader UnLock) button.. just try that
I opened it again with msm7227_semc, bacuse the others didn't worked, and installed it again. Now everything is fine, but the home button and the screen lock still not works:/ I think I'll leave it this way, and not risk one more time my network connection.
Thanks for your help.
Rodage said:
I opened it again with msm7227_semc, bacuse the others didn't worked, and installed it again. Now everything is fine, but the home button and the screen lock still not works:/ I think I'll leave it this way, and not risk one more time my network connection.
Thanks for your help.
Click to expand...
Click to collapse
If it's unlocked and the network is still there you can do whatever you want with it There's no need to lock it ever again so you can experiment with kernels and roms all you want.
What was the matter with the home-button and the screenlock? Do the other buttons work and is the screen ok when you slide out the keyboard?
SmG67 said:
If it's unlocked and the network is still there you can do whatever you want with it There's no need to lock it ever again so you can experiment with kernels and roms all you want.
What was the matter with the home-button and the screenlock? Do the other buttons work and is the screen ok when you slide out the keyboard?
Click to expand...
Click to collapse
The other buttons are all fine, and the home looks fine too, just the only way to use it is to turn on the screen with it. Which hasn't got a lock on it, when I push any button, it switches right to the home screen. Turning on lock patterns and others didn't helped. Maybe can I use external applications to substitute the functions?
Rodage said:
The other buttons are all fine, and the home looks fine too, just the only way to use it is to turn on the screen with it. Which hasn't got a lock on it, when I push any button, it switches right to the home screen. Turning on lock patterns and others didn't helped. Maybe can I use external applications to substitute the functions?
Click to expand...
Click to collapse
Hmm, sounds a bit like the ROM doesn't want to go to sleep. Maybe you could reboot into recovery, and wipe data/factory reset, wipe cache and wipe dalvik-cache (from the advanced menu). I'm sure you already did that, but it can't hurt to do it again, and see if that fixes the problem
The phone should enter deep-sleep after about 5 seconds after the screen is turned off, in which case the only way to wake up the screen are the power-button and the home-button. pressing menu or back should keep the phone asleep. If after about 10 or 20 seconds you can still wake up the screen with the back or menu buttons you might want to check if there's an app keeping the phone awake.
Done factory reset and cache wipe already multiple times. Just realized how annoying is the dysfunctional home button, so I tried MiniCM7-2.2.0, MiniCM9-3.0.5 with nAa-11,13,14 and nAa-ics-04. Unfortunatley didn't worked the home button or the screen lock with none of them. At first time, I installed the MiniCM10, but the phone was relatively slow with it and buzzed, so I switched to MiniCM7.
Screen timeout and turnoff delay both set to immediately, but even the camera button can turn on the screen no matter how many time elapses. Can the original MiniCM apps keep it awake? I installed a task killer, but no change.
Rodage said:
Done factory reset and cache wipe already multiple times. Just realized how annoying is the dysfunctional home button, so I tried MiniCM7-2.2.0, MiniCM9-3.0.5 with nAa-11,13,14 and nAa-ics-04. Unfortunatley didn't worked the home button or the screen lock with none of them. At first time, I installed the MiniCM10, but the phone was relatively slow with it and buzzed, so I switched to MiniCM7.
Screen timeout and turnoff delay both set to immediately, but even the camera button can turn on the screen no matter how many time elapses. Can the original MiniCM apps keep it awake? I installed a task killer, but no change.
Click to expand...
Click to collapse
If it happens on all ROMS, maybe it's your home-button keeping the phone alive, as in that it makes continuous contact. Wouldn't know what to do about that though. Does it happen on stock firmware too?
SmG67 said:
If it happens on all ROMS, maybe it's your home-button keeping the phone alive, as in that it makes continuous contact. Wouldn't know what to do about that though. Does it happen on stock firmware too?
Click to expand...
Click to collapse
No, when I restored it with the Sony Update Service everything worked fine on the stock 2.1, and it is still possible to turn on the screen with the home button, but it's other functions are out.
Wow, this time I didn't installed the gapps like it was written in the CM wiki (http://wiki.cyanogenmod.org/w/Install_CM_for_mimmi), both the home button and screen lock works. Why it is written in the "Install CM for mimmi" article if the gapps on the download page is for MiniCM10?
Whatever, shame on me, I should've just take it seriously, and not follow the instructions blindly.:silly:
Thanks for all of your help.:good:
Rodage said:
Wow, this time I didn't installed the gapps like it was written in the CM wiki (http://wiki.cyanogenmod.org/w/Install_CM_for_mimmi), both the home button and screen lock works. Why it is written in the "Install CM for mimmi" article if the gapps on the download page is for MiniCM10?
Whatever, shame on me, I should've just take it seriously, and not follow the instructions blindly.:silly:
Thanks for all of your help.:good:
Click to expand...
Click to collapse
If you get the ROM from the thread in x10minipro development section of this forum, there is a link to the proper gb-gapps