Hi,
So i just damaged my Galaxy s2 i777 usb port the one in the bottom of the phone.Now the power fluctuates and the phone dont charge.
The one located in the bottom of the phone.
These are the product links - Please let me know which one is the corrscrt-
ebay.com/itm/Samsung-Galaxy-S2-SGH-i777-Charging-Port-Connector-Dock-Socket-USB-Port-/170828272114
ebay.com/itm/Lot-5-USB-Charger-Replacement-Port-Charging-Port-For-Samsung-Galaxy-S2-SGH-i777-/271064731058?pt=LH_DefaultDomain_0&hash=item3f1cb78db2
Please let me know which one is correct and which one will work
--------------------------------
Also will a samsung galaxy s2 - t989 work in India ??
My sim cards work with i777 just wanna confirm if it'll work with T989
http://item.mobileweb.ebay.com/viewitem?itemId=230831019596&index=15&nav=SEARCH&nid=93121220059
Yes it says i9100 but it works for the i777. I just bought from that link and replaced it my I777 with basically the same problem you have. Problem was solved (see "usb won't connect" thread in Q&A).
There's a YouTube video showing how to replace it on the i9100, which I followed and is extremely similar to the i777.
Sent from my SGH-I777
I must add, that you should really evaluate yourself, and decide if you have the skills to do it. It can damage your phone permanently if you don't do it the right way.
djluis48 said:
I must add, that you should really evaluate yourself, and decide if you have the skills to do it. It can damage your phone permanently if you don't do it the right way.
Click to expand...
Click to collapse
I'll take it to a sevice center and ask them to install it
Lekerstein said:
http://item.mobileweb.ebay.com/viewitem?itemId=230831019596&index=15&nav=SEARCH&nid=93121220059
Yes it says i9100 but it works for the i777. I just bought from that link and replaced it my I777 with basically the same problem you have. Problem was solved (see "usb won't connect" thread in Q&A).
There's a YouTube video showing how to replace it on the i9100, which I followed and is extremely similar to the i777.
Sent from my SGH-I777
Click to expand...
Click to collapse
you sure it'll work
cuz this will be the last part of my pocket money lol
you sure it'll work
cuz this will be the last part of my pocket money lol
Click to expand...
Click to collapse
100% positive. I promise I just used it in my I777 about a week ago. Heck, if you want to save cash I can install it for free for you. Just PM me if so.
Sent from my SGH-I777
Lekerstein said:
100% positive. I promise I just used it in my I777 about a week ago. Heck, if you want to save cash I can install it for free for you. Just PM me if so.
Sent from my SGH-I777
Click to expand...
Click to collapse
sure lol
who dont want to save cash
at the risk of necromancing.... if anyone should stumble upon this looking for help like I did, through google. When you open your i777 up, the port board in your i777 says i9100, so yes the above listed item would work.
herr kartoffelkopf said:
at the risk of necromancing.... if anyone should stumble upon this looking for help like I did, through google. When you open your i777 up, the port board in your i777 says i9100, so yes the above listed item would work.
Click to expand...
Click to collapse
I'll +1 that. That said, I replaced my port and it still won't charge! Any ides on what else might fix it? I suppose I could have gotten a bad replacement.
-- Bud
cduced said:
I'll +1 that. That said, I replaced my port and it still won't charge! Any ides on what else might fix it? I suppose I could have gotten a bad replacement.
-- Bud
Click to expand...
Click to collapse
I finally found a replacement port that works in the i777 after a couple of failed attempts. It is sold on ebay by muchbuy-outlet. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
cduced said:
I finally found a replacement port that works in the i777 after a couple of failed attempts. It is sold on ebay by muchbuy-outlet. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
I'm about about to purchase a new port as well and wanted to know if you had tried the one from the quote below without luck.
Lekerstein said:
http://item.mobileweb.ebay.com/viewitem?itemId=230831019596&index=15&nav=SEARCH&nid=93121220059 Yes it says i9100 but it works for the i777. I just bought from that link and replaced it my I777 with basically the same problem you have. Problem was solved (see "usb won't connect" thread in Q&A). There's a YouTube video showing how to replace it on the i9100, which I followed and is extremely similar to the i777. Sent from my SGH-I777
Click to expand...
Click to collapse
mymansionisabox said:
I'm about about to purchase a new port as well and wanted to know if you had tried the one from the quote below without luck.
Click to expand...
Click to collapse
Did not try that one. There is one on amazon that some one said in the comments worked with the i777 but I could not get it to work. Also, on ebay, one from ipartsdepot1 did not work. I also contacted several other sellers that said their's would not work. Hope this helps. -- Bud
cduced said:
I finally found a replacement port that works in the i777 after a couple of failed attempts. It is sold on ebay by muchbuy-outlet. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
Does this require soldering to install? Are there any instructions available? Thank you.
Edit: I found a video here which I think should help.
Won't charge?
Like rushaan stated that you should think before you go any further, if your battery will not charge it could be more of an issue than a charger. For the last week I have been trying to boot mine and only get one of 2 messages, The Samsung boot image, and I have done all most everything I have read in our forums. The last run, I had been re-installing some apps, after a ROM change,all was going great ,then a message came up Stating that "due to the battery heating up,it was shutting down the charger" so, of course battery was drained and con not get the freakin' phone to do anything but show the "SAMSUNG" boot animation.. NOW, since then I can not get it to boot, esp. into CWM recovery. I am still reading to see what file/image that I maybe able to use while utilizing ODIN. So,with that being said look a bit more in-depth before you think you have the correct solution.
Related
Hey guys.. I just bought my new SGSII a week ago and I wanted to root it. I follow a guide on google and it went perfectly. Then I wanted to try a custom rom and found lite' and dark ROM... And I picked the dark ROM, so I found a guide on your site, for the 10.2 final edition and I did everything it said. I was starting to install, and I was waiting 15 mins and nothing happend. So as stupid as I am, I take the USB stick out and take the battery out too..
After that it wont turn ON. It wont do NOHTING, no download mode, no repair mode.. Its been a couple of hours now and I cant find any answer on google so I wanted to post my problem here so you could have a new case to crack ..
The wierd thing is my phone is warm, and even more warm then when I played on it.. But it wont function at all..
Please, I am very happy to recieve ANY answer
Please provide a link to the exact rom that you attempted to install.
Electroz said:
Please provide a link to the exact rom that you attempted to install.
Click to expand...
Click to collapse
I would like too but the system wont allow me until I have reached 8 posts..
darkyrom/community/index.php?threads/guide-final-v10-2-official-darkyrom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Look for the posts on the 301k Jig. I don't have the exact link but they're around somewhere on the SGS2 forum.
Its basically a microUSB with a 301k ohm resistor soldered onto it. If you have access to a soldering iron you can buid one in 10 minutes with the online schematics and basic knowledge of electronics.
It has been reported to throw your (bricked) device into download mode when no other method works, as well as reset the counters (tried and tested by me).
Once you get download mode, flash stock firmware w/ Odin and that could fix everything.
Sent from my GT-I9100 using XDA App
Rovah said:
Look for the posts on the 301k Jig. I don't have the exact link but they're around somewhere on the SGS2 forum.
Its basically a microUSB with a 301k ohm resistor soldered onto it. If you have access to a soldering iron you can buid one in 10 minutes with the online schematics and basic knowledge of electronics.
It has been reported to throw your (bricked) device into download mode when no other method works. mode as well as reset the counters (tried and tested by me).
Once you get download mode, flash stock firmware w/ Odin and that could fix everything.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I suck at building eletronics trust me.. but yes I have come a cross a thead speaking about that but I need to buy a couple of things, and I work alot so I dont really have time this week but I will defently look into it right now thanks for the reply Ill see if I can build it and get into details with it.. I think I saw a youtube clip where this guy made one ..
Krupic22 said:
I suck at building eletronics trust me.. but yes I have come a cross a thead speaking about that but I need to buy a couple of things, and I work alot so I dont really have time this week but I will defently look into it right now thanks for the reply Ill see if I can build it and get into details with it.. I think I saw a youtube clip where this guy made one ..
Click to expand...
Click to collapse
Did you play with a .pit file?
JupiterdroidXDA said:
Did you play with a .pit file?
Click to expand...
Click to collapse
I actually think I did and with this file:
s1_odin_20100512.pit
Krupic22 said:
I actually think I did and with this file:
s1_odin_20100512.pit
Click to expand...
Click to collapse
Yeah, that'll do it. Personally, I would only use XDA as a resource for rooting and not Google..in the Original Android Development sub-forum there is a great guide on flashing via Odin and applying stock firmware (in which, it actually states in BOLD not to tick the pit files.)
Good luck!
Never ever use pit file unless you know what a pit file is and know exactly what you are doing.....most bricked phones caused by flashing pit
http://www.darkyrom.com/community/i...rom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Are you sure that is for Galaxy SII? I9000 (Galaxy S) roms won't work on SGS2
nraudigy2 said:
http://www.darkyrom.com/community/i...rom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Are you sure that is for Galaxy SII? I9000 (Galaxy S) roms won't work on SGS2
Click to expand...
Click to collapse
OUCH!!!
Hopefully you can get in to download mode using the jig. If not, I wonder if anyone is able to assist in manually pushing the required files via ADB.
It is rom for Galaxy S 1 you bricked it and you deserve it for not reading !
ghost77 said:
It is rom for Galaxy S 1 you bricked it and you deserve it for not reading !
Click to expand...
Click to collapse
Easy buddy...Post something useful.
Sure he should have definitely read first but in the end nobody deserves a bricked device. These aren't $50 phones we're talking about.
amazon.co.uk/Samsung-Galaxy-unbrick-Download-Android/dp/B005922D2M
It will arrive next week, and I hope it will work... If not I need to send it to be repared
But when it arrives I will write here again so I dont **** anything up again thx for all the support guys!
nraudigy2 said:
http://www.darkyrom.com/community/i...rom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Are you sure that is for Galaxy SII? I9000 (Galaxy S) roms won't work on SGS2
Click to expand...
Click to collapse
Lol!! (Sorry) but this was my thoughts as soon as you said darky 10.2.... that is definitely not designed for the SGS2. If you can get the above USB jig fix to work then great. Otherwise I hope you have insurance :S
Sent from my GT-I9100 using XDA App
kickassdave said:
Lol!! (Sorry) but this was my thoughts as soon as you said darky 10.2.... that is definitely not designed for the SGS2. If you can get the above USB jig fix to work then great. Otherwise I hope you have insurance :S
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I am a member of this closed tracker site and there are some really smart heads there, and I asked if anyone knew a good ROM for SGSII and this one guy said I should look at Darky rom.. so I did hehe
There should be insurance its a whole new phone got it last week..
I am a member of this closed tracker site and there are some really smart heads there,
and this one guy said I should look at Darky rom
Darky Rom for SGS2 from Dev section here .
jje
Yikes..
If the jig doesn't work and you have to send the phone in it might be a good idea to not mention what exactly you did to make it behave thusly
*edit*
Also, if all else fails you might want to check the debricking service detailed here: http://www.youtube.com/watch?v=zN7le4GmxZs
Eysk said:
Yikes..
If the jig doesn't work and you have to send the phone in it might be a good idea to not mention what exactly you did to make it behave thusly
*edit*
Also, if all else fails you might want to check the debricking service detailed here: http://www.youtube.com/watch?v=zN7le4GmxZs
Click to expand...
Click to collapse
It will be a little cheaper if I just sended it to the repair shop in my town, I live in denmark if I send it to US to be fixed dahm ...
Well .. I think for sending it to the US you're looking at approximately ~85$ (shipping fees + repair)
Hard to tell what Samsung would charge if they found out you voided the warranty
Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
I wonder then, can the jig be used to reset the flash counter to zero?
My Samsung Galaxy Note™ is smarter than your Honor Student.
yes it works to get you into download mode which is fantastic however it will not aid in resetting the flash counter like it did on the SGS2
and BTW this isnt considered a development, this actually should have been opened in the General Section....
redneck.nerd said:
Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
Click to expand...
Click to collapse
what does the Jig do? (I've never owned a Samsung Android phone before this one)
orangekid said:
what does the Jig do? (I've never owned a Samsung Android phone before this one)
Click to expand...
Click to collapse
They are physical micro-usb sticks that are meant to help you recover from a bricking.
can you tell us where to get one ?
redneck.nerd said:
Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
Click to expand...
Click to collapse
or where did you get yours for how much?
Request mod to move this to general.
Moved To General
This section is for development only! Please post information in the general section
You can buy them off of ebay, or at least you used to be able to, or you can build one. I built mine from an extra data cable I had laying around at the time. It forces the phone into download mode, which is very convenient for those of us that flash roms at will.
This one is a fancy version of the home-built kind, mine is pretty rough, but it does the job and that's all that really matters...
http://forum.xda-developers.com/showthread.php?t=967404&highlight=usb+jig
I bought one from: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I tried it on my Note and it gets to Download Mode fine. Great device incase of a brick that disables the button combos.
thanks man.
Corvette Dave said:
I bought one from: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I tried it on my Note and it gets to Download Mode fine. Great device incase of a brick that disables the button combos.
Click to expand...
Click to collapse
i will try and get one.
This is also confirmed to work on the Galaxy Nexus, just in case anyone was wondering.
redneck.nerd said:
Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
Click to expand...
Click to collapse
Can u please link the post? it's gonna be a lot faster for people. Thanks!
Really? :facepalm: Go look at the second post I did in this thread...
Just so you don't have to strain yourself too much by using the scroll wheel on your mouse...
CLICK =====>HERE<=====
Corvette Dave said:
I bought one from: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I tried it on my Note and it gets to Download Mode fine. Great device incase of a brick that disables the button combos.
Click to expand...
Click to collapse
I'm definitely gonna be buying one of these!
zozodouce said:
or where did you get yours for how much?
Click to expand...
Click to collapse
you can make your own
redneck.nerd said:
Really? :facepalm: Go look at the second post I did in this thread...
Just so you don't have to strain yourself too much by using the scroll wheel on your mouse...
CLICK =====>HERE<=====
Click to expand...
Click to collapse
Sorry... I'm what you call blind. Lol
Sent from my SGH-I717R using xda premium
I bought one when my wife bricked her Captivate last year, and tested it on my note the day I got it. I figured it worked for all Samsung phones so I didn't think it was worth mentioning. Thanks anyway. BTW, if someone is looking to buy a jig, this is the one I got from Amazon, it's 3 bucks cheaper and works just as good, not to mention free Prime shipping if you have a membership.
http://www.amazon.com/Aftermarket-D...CT0Y/ref=sr_1_2?ie=UTF8&qid=1330836900&sr=8-2
i have a jig i used to reset my sgs2 counter that works on the note but does not reset the counter on the note.
I had to have my S2 replaced under warranty this week because of failure of the USB port. The replacement came with ICS 4.0.3 already installed. After a day of getting all my stuff moved over, rooting the phone, and re-installing all my apps today I went out and paired the phone with my 2012 Ram. My previous S2 has worked flawlessly with this vehicle since day one. Unfortunately, I have not been able to get my Outlook contacts to sync to the phone via Hotmail Connector, only the Google ones. This had been working for me prior on rooted stock GB. The truck had no problem pairing, but doesn't want to dowload the phonebook for some reason so I can't use voice dial and incoming calls are not recognized. Is there enough difference between GB and ICS to have caused this? I don't want to go back to GB, but this is a deal breaker. I don't really see all that much improvement with ICS anyway. I need my phone to work as it was.:crying:
Test gb and see
Bleh
Instead of starting a whole new pointless thread, why not just downgrade and find out your self??
Sent from my One X using XDA Premium App
Dude you should have waited to get the replacement. The USB part for my phone just came in today and I just finished installing it. I'm charging up my phone now and will report back in your original thread on whether or not the charging indicator stays there after I unplug it. Replacing the chip was super easy, btw.
Edit: it wasn't your thread, but you posted in it. It's in the Q&A section.
Sent from my SGH-I777 using xda app-developers app
fcb1 said:
Instead of starting a whole new pointless thread, why not just downgrade and find out your self??
Click to expand...
Click to collapse
Pointless thread? I don't want to downgrade, I wanted to find out if anyone else had seen an issue like this or had something better to reply with other than, "Flash back and see." Sorry if I took up space better used by another clueless newb asking how to revert to stock or how to flash his Skyrocket.
FYI, I finally got the Outlook/Hotmail sync working (I would tell you how, but since no one cares...). Now to see if I can get my phonebook to download to the truck. As for Lekerstein, I really didn't want to be messing with the USB connector when the phone is still in warranty. By getting a replacement I also now got another month added to my warranty and an updated phone, so I'm good. Hope yours works out for you.
Miami_Son said:
Pointless thread? I don't want to downgrade, I wanted to find out if anyone else had seen an issue like this or had something better to reply with other than, "Flash back and see." Sorry if I took up space better used by another clueless newb asking how to revert to stock or how to flash his Skyrocket.
FYI, I finally got the Outlook/Hotmail sync working (I would tell you how, but since no one cares...). Now to see if I can get my phonebook to download to the truck. As for Lekerstein, I really didn't want to be messing with the USB connector when the phone is still in warranty. By getting a replacement I also now got another month added to my warranty and an updated phone, so I'm good. Hope yours works out for you.
Click to expand...
Click to collapse
Well seeing as the problem started on non GB then it would seem that ICS is the culprit
122ninjas said:
Well seeing as the problem started on non GB then it would seem that ICS is the culprit
Click to expand...
Click to collapse
Yes and no. It appears that the original method that worked on GB for setting up MS Exchange sync of the phone with Outlook via Hotmail no longer works on ICS. I simply tried a different method and that was the charm that worked. The functionality is still there, it just takes a different setup method to get it to work.:good:
Miami_Son said:
Yes and no. It appears that the original method that worked on GB for setting up MS Exchange sync of the phone with Outlook via Hotmail no longer works on ICS. I simply tried a different method and that was the charm that worked. The functionality is still there, it just takes a different setup method to get it to work.:good:
Click to expand...
Click to collapse
I was talking about your car phonebook sync
122ninjas said:
I was talking about your car phonebook sync
Click to expand...
Click to collapse
Got that working this morning, too.
fcb1 said:
Instead of starting a whole new pointless thread, why not just downgrade and find out your self??
Sent from my One X using XDA Premium App
Click to expand...
Click to collapse
@Miami,
This just made me chuckle. If he only knew what some of us know.
Miami_Son said:
Pointless thread? I don't want to downgrade, I wanted to find out if anyone else had seen an issue like this or had something better to reply with other than, "Flash back and see." Sorry if I took up space better used by another clueless newb asking how to revert to stock or how to flash his Skyrocket.
FYI, I finally got the Outlook/Hotmail sync working (I would tell you how, but since no one cares...). Now to see if I can get my phonebook to download to the truck. As for Lekerstein, I really didn't want to be messing with the USB connector when the phone is still in warranty. By getting a replacement I also now got another month added to my warranty and an updated phone, so I'm good. Hope yours works out for you.
Click to expand...
Click to collapse
That's the Miami_Son we all know, and love! You tell em!!
creepyncrawly said:
@Miami,
This just made me chuckle. If he only knew what some of us know.
Click to expand...
Click to collapse
No ****!:laugh:
Actually Miami has calmed down quite a bit from when I first arrived. This is a mild.
Phalanx7621 said:
Actually Miami has calmed down quite a bit from when I first arrived. This is a mild.
Click to expand...
Click to collapse
I agree. I do, on occasion, miss his swift smackdown on noobs/dumb questions .....
I haven't been the same since Red5 left.:crying:
Miami_Son said:
I haven't been the same since Red5 left.:crying:
Click to expand...
Click to collapse
+1
Miami_Son said:
I haven't been the same since Red5 left.:crying:
Click to expand...
Click to collapse
R.I.P. Red
Sent from wherever I'm at
I have tried 4-5 diferent roms and in all roms i am getting my music apps(audio+video stock and third party apps, call ringtones) are getting strugle in running with both speaker and headphone mod. Not getting fc anytime. Sometime all related apps runs smoothly and sometime all face struggle zigzag type video/audio. Any help Please.
Is flashing stock firmware help? OR it is purly a hardware related issue.
Will flashing Stock firmware via odin unroot my phone?
Dont have a clue about that, did you try another music player like google mudic?
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Dont have a clue about that, did you try another music player like google mudic?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Till now not tried Google music. Should I try that?
Right now I am with MIUI 3.9.27 rom. I have three video players (miui +samsung +mxplayer) audia player (stock +poweramp). Everywhere same issue. Already tried ROMS( Xtreme(AOKP BASE); teamxd v4, v5(Stock Based); MIUI v5 2.9.6 and now 2.9.27).
Try it you dont have anything to lose. And the mod is from http://forum.xda-developers.com/showthread.php?t=2302748 site right?
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Try it you dont have anything to lose. And the mod is from http://forum.xda-developers.com/showthread.php?t=2302748 site right?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Actually extra volume boost link given by you is for sony or aosp roms and for increse in volume. I have different issue. My audio/video are not running smoothly even ringtone when anyone calls me. So i would not like to try that. I have tried Google play music app. and actually right now all related apps are working fine so that also works fine. I will reply about Google music app when I get the issue again.
Okay. You said something about a sound mod so I looked for it.
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Okay. You said something about a sound mod so I looked for it.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
yes. and same issue comes in all roms so i think it may be some hardware related issue Or some error which is not getting solved after rom changing also. As you suggested to someone in other thread "strong bootloop" to use script "to remove parts of the phone that may be can make some isues with the ROM that you are flashing" , Can i use that type of thing. If so please provide a link for i9100g.
Actually problem starts as:
I was with teamxd rom(samsung based). My memory get filled and i could not delete any file by file manager(ES). I made a factory reset and device got bootloop. Then I install the same Rom again with full wipe. After that i am with this problem in all roms.
siwach said:
Actually problem starts as:
I was with teamxd rom(samsung based). My memory get filled and i could not delete any file by file manager(ES). I made a factory reset and device got bootloop. Then I install the same Rom again with full wipe. After that i am with this problem in all roms.
Click to expand...
Click to collapse
I actually dont know what is wrong maybe is what you say error or a bug. And the i9100g I think that it uses almost exact hardware thing that i9100 has the only difference is the nfc.
Sent from my GT-I9100 using xda app-developers app
kona144 said:
I actually dont know what is wrong maybe is what you say error or a bug. And the i9100g I think that it uses almost exact hardware thing that i9100 has the only difference is the nfc.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Ok i have applied stock firmware via odin. It unroot my phone. It seems the audio/video struggle issue get solve. Let i try some different type of video/audio formats and reply tomorrow.
not solved after stock firmware
siwach said:
Ok i have applied stock firmware via odin. It unroot my phone. It seems the audio/video struggle issue get solve. Let i try some different type of video/audio formats and reply tomorrow.
Click to expand...
Click to collapse
Still I have same problem after stock firmware via odin. All audio/video apps not running smoothly half of the time.
siwach said:
Still I have same problem after stock firmware via odin. All audio/video apps not running smoothly half of the time.
Click to expand...
Click to collapse
I found the main reason why audio/video is not running smoothly. I cleaned usb prot and now when I am applying charger there is no issue as soon as i remove the usb cable running audio/video apps getting struggle.
siwach said:
I found the main reason why audio/video is not running smoothly. I cleaned usb prot and now when I am applying charger there is no issue as soon as i remove the usb cable running audio/video apps getting struggle.
Click to expand...
Click to collapse
You might need to change the USB flex board then. Cheap & easy. Click the link in my signature, from there you can access a guide by @keithross39, where it's explained how to DIY if you choose. Pay careful attention though, there's 4 different versions (revisions) of the board itself, you need the correct one or you'll get issues. Else, just take it to a service centre/local shop to get it replaced.
Hopper8 said:
You might need to change the USB flex board then. Cheap & easy. Click the link in my signature, from there you can access a guide by @keithross39, where it's explained how to DIY if you choose. Pay careful attention though, there's 4 different versions (revisions) of the board itself, you need the correct one or you'll get issues. Else, just take it to a service centre/local shop to get it replaced.
Click to expand...
Click to collapse
I have taken it to local shop and he is saying it is not usb problem. Your phone not taking so much load to play audio/video. After applying charger it get more power and then it works fine. He take my phone for one day. I suggest him please change usb port first. If that not works then try to find solution according to you.
Where I can get USB flex board in india(anyone please help). I tried to find on ebay but not succeed. There is someone whose motherboard is dead. Remaining everything is working. But his phone is I9100 and mine is I9100g. Are the remaing hardwares are same in both. Will his USB board works in mine
siwach said:
I have taken it to local shop and he is saying it is not usb problem. Your phone not taking so much load to play audio/video. After applying charger it get more power and then it works fine. He take my phone for one day. I suggest him please change usb port first. If that not works then try to find solution according to you.
Where I can get USB flex board in india(anyone please help). I tried to find on ebay but not succeed. There is someone whose motherboard is dead. Remaining everything is working. But his phone is I9100 and mine is I9100g. Are the remaing hardwares are same in both. Will his USB board works in mine
Click to expand...
Click to collapse
I would ordinarily say it isn't either. I don't know if it's not that. Regardless, it sounds like you need a new one anyway. Let us know how you go with the repair shop.
As far as I know, the i9100g one will not be compatible with the i9100, as the hardware is different. I don't know how to buy one for an i9100g, I would have said ebay but other than that, I'm not too sure. Sorry to not be of much help.
Hopper8 said:
I would ordinarily say it isn't either. I don't know if it's not that. Regardless, it sounds like you need a new one anyway. Let us know how you go with the repair shop.
As far as I know, the i9100g one will not be compatible with the i9100, as the hardware is different. I don't know how to buy one for an i9100g, I would have said ebay but other than that, I'm not too sure. Sorry to not be of much help.
Click to expand...
Click to collapse
Thanks a lot for this kind conversation.
siwach said:
Thanks a lot for this kind conversation.
Click to expand...
Click to collapse
No problem mate. Let us know if you have any success
Sent from a galaxy far, far away
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
Click to expand...
Click to collapse
This is great news. Will make a DIY one again soon.
Ps. Wrong section tho, ask mods to move to accesories or general.
Sent from my SM-G935F using Tapatalk
Heh i used to sell those back in the captivate days... good times
You are in the right Section to me! It's part of recovery, not an accessory in generic sense!
It was also able to reboot the tamper counter before, will it do so with the s7 ?
It'a good that I haven't lost my old USB jig from S2 days
EarlZ said:
It was also able to reboot the tamper counter before, will it do so with the s7 ?
Click to expand...
Click to collapse
That I can not say for sure...until we have root I can't say
shaq1907 said:
It'a good that I haven't lost my old USB jig from S2 days
Click to expand...
Click to collapse
I know right I happen to find mine and gave it a try and it work
Thread moved ok.
Thanks,
Bajanman
Bajanman said:
Thread moved ok.
Thanks,
Bajanman
Click to expand...
Click to collapse
Thank you..
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Click to expand...
Click to collapse
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
TehPirate_ said:
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
Click to expand...
Click to collapse
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
annson08 said:
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
Click to expand...
Click to collapse
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Hi, can you upload the video please and if possible, show a link to buy or make the jig.
Thanks in advance
Click to expand...
Click to collapse
@kitila,
I found this topic Googling for this same info, so thanks for reporting that the USB Jig still works with S7!
kitila said:
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
Click to expand...
Click to collapse
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Thank you for the correction on that I knew it was 100 something
Can anyone confirm that this really works? My S7 seems to be hard bricked
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
Can you point to where on ebay to get one? I can't seem to find the right search terms.
Thanks.
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
good to know, I've got a 1,000 pack of 10k resistors in my desk lol
It's not what you buy its what you build