Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
I wonder then, can the jig be used to reset the flash counter to zero?
My Samsung Galaxy Note™ is smarter than your Honor Student.
yes it works to get you into download mode which is fantastic however it will not aid in resetting the flash counter like it did on the SGS2
and BTW this isnt considered a development, this actually should have been opened in the General Section....
redneck.nerd said:
Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
Click to expand...
Click to collapse
what does the Jig do? (I've never owned a Samsung Android phone before this one)
orangekid said:
what does the Jig do? (I've never owned a Samsung Android phone before this one)
Click to expand...
Click to collapse
They are physical micro-usb sticks that are meant to help you recover from a bricking.
can you tell us where to get one ?
redneck.nerd said:
Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
Click to expand...
Click to collapse
or where did you get yours for how much?
Request mod to move this to general.
Moved To General
This section is for development only! Please post information in the general section
You can buy them off of ebay, or at least you used to be able to, or you can build one. I built mine from an extra data cable I had laying around at the time. It forces the phone into download mode, which is very convenient for those of us that flash roms at will.
This one is a fancy version of the home-built kind, mine is pretty rough, but it does the job and that's all that really matters...
http://forum.xda-developers.com/showthread.php?t=967404&highlight=usb+jig
I bought one from: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I tried it on my Note and it gets to Download Mode fine. Great device incase of a brick that disables the button combos.
thanks man.
Corvette Dave said:
I bought one from: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I tried it on my Note and it gets to Download Mode fine. Great device incase of a brick that disables the button combos.
Click to expand...
Click to collapse
i will try and get one.
This is also confirmed to work on the Galaxy Nexus, just in case anyone was wondering.
redneck.nerd said:
Hey guys and gals,
Just wanted to update everyone, the micro-usb jig that worked so well on the captivate also happens to work on the Note. Just tried mine out of curiosity and it worked. Plug it in, wait 3-4 seconds, vibrate, download mode...
I had not seen this posted anywhere in here, so just in case someone hard bricks this epic device, we do have a backdoor...
Click to expand...
Click to collapse
Can u please link the post? it's gonna be a lot faster for people. Thanks!
Really? :facepalm: Go look at the second post I did in this thread...
Just so you don't have to strain yourself too much by using the scroll wheel on your mouse...
CLICK =====>HERE<=====
Corvette Dave said:
I bought one from: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I tried it on my Note and it gets to Download Mode fine. Great device incase of a brick that disables the button combos.
Click to expand...
Click to collapse
I'm definitely gonna be buying one of these!
zozodouce said:
or where did you get yours for how much?
Click to expand...
Click to collapse
you can make your own
redneck.nerd said:
Really? :facepalm: Go look at the second post I did in this thread...
Just so you don't have to strain yourself too much by using the scroll wheel on your mouse...
CLICK =====>HERE<=====
Click to expand...
Click to collapse
Sorry... I'm what you call blind. Lol
Sent from my SGH-I717R using xda premium
I bought one when my wife bricked her Captivate last year, and tested it on my note the day I got it. I figured it worked for all Samsung phones so I didn't think it was worth mentioning. Thanks anyway. BTW, if someone is looking to buy a jig, this is the one I got from Amazon, it's 3 bucks cheaper and works just as good, not to mention free Prime shipping if you have a membership.
http://www.amazon.com/Aftermarket-D...CT0Y/ref=sr_1_2?ie=UTF8&qid=1330836900&sr=8-2
i have a jig i used to reset my sgs2 counter that works on the note but does not reset the counter on the note.
Related
hello,
Has anyone looked into finding the debug/jtag pins/port?
I have a 100% bricked vibrant here. Someone gave me. I want to start to look into it. Looking for some help.
New pics up using a tri-pod.
Small pics
http://www.mrcellphoneunlocker.com/vibrant_macro
Raw Large Pics
http://www.mrcellphoneunlocker.com/vibrant_macro/Raw/
Doing some searching around I found the CPU is a S5PC110 and i found a dev-board.
http://www.armdesigner.com/KIT S5PC110 (Android 2.1).html
[email protected]
Thanks!
What are those?
It's what you use to fix/base flash bricked phones.
How the hell did you get a 100% bricked vibrant I didnt think they existed.
Sgs
Doubt it is bricked. Maybe hardware dead, but not bricked.
Unless he tested something for you that you were not willing to test.
Sent from my SGH-T959 using XDA App
Vanilla gorilla said:
How the hell did you get a 100% bricked vibrant I didnt think they existed.
Sgs
Click to expand...
Click to collapse
I had one as well, but it was my fault, I clicked "repartition" on Odin. I couldn't find a fix so I exchanged it within the 14 days.
They exist... I had one... Wouldn't power on at all..
No recovery
No download
No vibrant screen
Sent from my SGH-T959 using XDA App
kopykatkiller said:
Doubt it is bricked. Maybe hardware dead, but not bricked.
Unless he tested something for you that you were not willing to test.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
My apps dont brick phones.
He flashed MS_GURU rom -> and tried to go back to US. and it died. no power to screen. the phone just gets hot. Ive disas the phone. I will take some pics soon.
But, nice try on the bash.
As Fes would say... "ah, burn..."
Hahaha
But yeah your app doesn't work..
Sent from my SGH-T959 using XDA App
rhcp0112345 said:
He flashed MS_GURU rom -> and tried to go back to US. and it died. no power to screen. the phone just gets hot. Ive disas the phone. I will take some pics soon.
Click to expand...
Click to collapse
Nice. Please do. Then we can finally settle what chip is running and if there is FM hardware or not. Hope you have a nice camera! I want HUGE and close pics
BTW, what you think the odds are the usb doubles as jtag? Briefly going through all the code, I could have sworn I saw stuff related to ttyS0, baud rates and all. Maybe just need the right pinout.
fearmonkey said:
Nice. Please do. Then we can finally settle what chip is running and if there is FM hardware or not. Hope you have a nice camera! I want HUGE and close pics
BTW, what you think the odds are the usb doubles as jtag? Briefly going through all the code, I could have sworn I saw stuff related to ttyS0, baud rates and all. Maybe just need the right pinout.
Click to expand...
Click to collapse
Would be interesting. Im going to take the pics as soon as i can. its weekend. prob monday or tuesday.
if you think it works as TTY. Its possible. I dont see any pins on the boards. Thats why i asked.
JTAG and serial console are different things. jtag won't show in the kernel, it is a physical set of pins for direct access to the cpu and/or flash.
The serial console might be available via usb (eg on the g1 it is, with a custom cable) but it is only helpful for kernel debugging - if a kernel is broken, but not too broken, you can get logs out of it while it starts up..
Ok. I made an attempt at taking the pics. This is my first time to do macro shots
If anyone can give me suggestions to make better. Let me know.
http://www.mrcellphoneunlocker.com/vibrant_macro/MrCellPhoneUnlocker/TMO_Samsung_Photos.html#grid
Disconn3ct said:
JTAG and serial console are different things. jtag won't show in the kernel, it is a physical set of pins for direct access to the cpu and/or flash.
The serial console might be available via usb (eg on the g1 it is, with a custom cable) but it is only helpful for kernel debugging - if a kernel is broken, but not too broken, you can get logs out of it while it starts up..
Click to expand...
Click to collapse
Indeed. But seeing the tty stuff in the kernel just made me think that if the usb can double as a serial port, it might also double (triple?) as an easy to reach jtag port. Then again, I dunno how many cables a jtag needs. iirc, microusb has 5.
New pics up using a tri-pod.
http://www.mrcellphoneunlocker.com/vibrant_macro
let me know
Raw pics big ones: Best quality: http://www.mrcellphoneunlocker.com/vibrant_macro/Raw/
MOD, Why were these two threads moved? These are DEV threads. not Gerneal threads. Please move them back.
Thanks!
rhcp0112345 said:
MOD, Why were these two threads moved? These are DEV threads. not Gerneal threads. Please move them back.
Thanks!
Click to expand...
Click to collapse
They don't actually read threads before moving them.. cm6 trolling bs is in dev, but all the active dev threads are getting moved..
The only thing developed in these threads were pictures...
Sent from my SGH-T959 using XDA App
junkdruggler said:
The only thing developed in these threads were pictures...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Which would be used by a general user? I dont think so. Why the hell would they care the inside. LOL
These pictures were meant for hardware people. To give ideas.
Hey guys.. I just bought my new SGSII a week ago and I wanted to root it. I follow a guide on google and it went perfectly. Then I wanted to try a custom rom and found lite' and dark ROM... And I picked the dark ROM, so I found a guide on your site, for the 10.2 final edition and I did everything it said. I was starting to install, and I was waiting 15 mins and nothing happend. So as stupid as I am, I take the USB stick out and take the battery out too..
After that it wont turn ON. It wont do NOHTING, no download mode, no repair mode.. Its been a couple of hours now and I cant find any answer on google so I wanted to post my problem here so you could have a new case to crack ..
The wierd thing is my phone is warm, and even more warm then when I played on it.. But it wont function at all..
Please, I am very happy to recieve ANY answer
Please provide a link to the exact rom that you attempted to install.
Electroz said:
Please provide a link to the exact rom that you attempted to install.
Click to expand...
Click to collapse
I would like too but the system wont allow me until I have reached 8 posts..
darkyrom/community/index.php?threads/guide-final-v10-2-official-darkyrom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Look for the posts on the 301k Jig. I don't have the exact link but they're around somewhere on the SGS2 forum.
Its basically a microUSB with a 301k ohm resistor soldered onto it. If you have access to a soldering iron you can buid one in 10 minutes with the online schematics and basic knowledge of electronics.
It has been reported to throw your (bricked) device into download mode when no other method works, as well as reset the counters (tried and tested by me).
Once you get download mode, flash stock firmware w/ Odin and that could fix everything.
Sent from my GT-I9100 using XDA App
Rovah said:
Look for the posts on the 301k Jig. I don't have the exact link but they're around somewhere on the SGS2 forum.
Its basically a microUSB with a 301k ohm resistor soldered onto it. If you have access to a soldering iron you can buid one in 10 minutes with the online schematics and basic knowledge of electronics.
It has been reported to throw your (bricked) device into download mode when no other method works. mode as well as reset the counters (tried and tested by me).
Once you get download mode, flash stock firmware w/ Odin and that could fix everything.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I suck at building eletronics trust me.. but yes I have come a cross a thead speaking about that but I need to buy a couple of things, and I work alot so I dont really have time this week but I will defently look into it right now thanks for the reply Ill see if I can build it and get into details with it.. I think I saw a youtube clip where this guy made one ..
Krupic22 said:
I suck at building eletronics trust me.. but yes I have come a cross a thead speaking about that but I need to buy a couple of things, and I work alot so I dont really have time this week but I will defently look into it right now thanks for the reply Ill see if I can build it and get into details with it.. I think I saw a youtube clip where this guy made one ..
Click to expand...
Click to collapse
Did you play with a .pit file?
JupiterdroidXDA said:
Did you play with a .pit file?
Click to expand...
Click to collapse
I actually think I did and with this file:
s1_odin_20100512.pit
Krupic22 said:
I actually think I did and with this file:
s1_odin_20100512.pit
Click to expand...
Click to collapse
Yeah, that'll do it. Personally, I would only use XDA as a resource for rooting and not Google..in the Original Android Development sub-forum there is a great guide on flashing via Odin and applying stock firmware (in which, it actually states in BOLD not to tick the pit files.)
Good luck!
Never ever use pit file unless you know what a pit file is and know exactly what you are doing.....most bricked phones caused by flashing pit
http://www.darkyrom.com/community/i...rom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Are you sure that is for Galaxy SII? I9000 (Galaxy S) roms won't work on SGS2
nraudigy2 said:
http://www.darkyrom.com/community/i...rom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Are you sure that is for Galaxy SII? I9000 (Galaxy S) roms won't work on SGS2
Click to expand...
Click to collapse
OUCH!!!
Hopefully you can get in to download mode using the jig. If not, I wonder if anyone is able to assist in manually pushing the required files via ADB.
It is rom for Galaxy S 1 you bricked it and you deserve it for not reading !
ghost77 said:
It is rom for Galaxy S 1 you bricked it and you deserve it for not reading !
Click to expand...
Click to collapse
Easy buddy...Post something useful.
Sure he should have definitely read first but in the end nobody deserves a bricked device. These aren't $50 phones we're talking about.
amazon.co.uk/Samsung-Galaxy-unbrick-Download-Android/dp/B005922D2M
It will arrive next week, and I hope it will work... If not I need to send it to be repared
But when it arrives I will write here again so I dont **** anything up again thx for all the support guys!
nraudigy2 said:
http://www.darkyrom.com/community/i...rom-gingerbread-jvq-2-3-4-noob-friendly.4267/
Are you sure that is for Galaxy SII? I9000 (Galaxy S) roms won't work on SGS2
Click to expand...
Click to collapse
Lol!! (Sorry) but this was my thoughts as soon as you said darky 10.2.... that is definitely not designed for the SGS2. If you can get the above USB jig fix to work then great. Otherwise I hope you have insurance :S
Sent from my GT-I9100 using XDA App
kickassdave said:
Lol!! (Sorry) but this was my thoughts as soon as you said darky 10.2.... that is definitely not designed for the SGS2. If you can get the above USB jig fix to work then great. Otherwise I hope you have insurance :S
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I am a member of this closed tracker site and there are some really smart heads there, and I asked if anyone knew a good ROM for SGSII and this one guy said I should look at Darky rom.. so I did hehe
There should be insurance its a whole new phone got it last week..
I am a member of this closed tracker site and there are some really smart heads there,
and this one guy said I should look at Darky rom
Darky Rom for SGS2 from Dev section here .
jje
Yikes..
If the jig doesn't work and you have to send the phone in it might be a good idea to not mention what exactly you did to make it behave thusly
*edit*
Also, if all else fails you might want to check the debricking service detailed here: http://www.youtube.com/watch?v=zN7le4GmxZs
Eysk said:
Yikes..
If the jig doesn't work and you have to send the phone in it might be a good idea to not mention what exactly you did to make it behave thusly
*edit*
Also, if all else fails you might want to check the debricking service detailed here: http://www.youtube.com/watch?v=zN7le4GmxZs
Click to expand...
Click to collapse
It will be a little cheaper if I just sended it to the repair shop in my town, I live in denmark if I send it to US to be fixed dahm ...
Well .. I think for sending it to the US you're looking at approximately ~85$ (shipping fees + repair)
Hard to tell what Samsung would charge if they found out you voided the warranty
Does a Jig work with the ATT version?
Heck ya! Works awesome. Bought mine on ebay, plugged it in and wallah! No more yellow ! and goes right to download mode. I know I could definitly make my own, but I love the fit and finish of this one compared to a homemade one. There are cheaper ones out there and many places to get it from. I got mine here-> http://www.ebay.com/itm/150618157997?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Even works on my wife's Infuse. It came within maybe 3-4 days or something!
Yes the jig works. I did find out however, that if you had flashed a version of android 2.3.5, you will need to re-flash a secondary boot loader to get the jig to work. It happened to me. I can't remember exactly who I got the info from in the forum's here, but it is here somewhere.
I have a jig from my captivate that does nothing to this phone. Is that normal?
Sent from my Galaxy S II (i777)
I duno but the jig for the international version works. Hot mibe off eBay for 2.50
Sent from my SAMSUNG-SGH-I777 using XDA App
Yes
Sent from my GT-I9100 using Tapatalk
quarlow said:
I have a jig from my captivate that does nothing to this phone. Is that normal?
Sent from my Galaxy S II (i777)
Click to expand...
Click to collapse
I777 is more picky - some Cappy jigs work, some don't.
Yes! Just used it to clear my counter and get rid of the yellow triangle. I used this one, there are cheaper out there but I can vouch that this one works:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
^^^^used the above and it works great
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Entropy512 said:
I777 is more picky - some Cappy jigs work, some don't.
Click to expand...
Click to collapse
I777 seems to only like jigs made with 1/4 watt
Resistors.
Sent from my SAMSUNG-SGH-I777 using XDA App
dayv said:
I777 seems to only like jigs made with 1/4 watt
Resistors.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
That shouldn't matter - however, 1/4 watt resistors are more likely to have good tolerance ratings than 1/2 watt ones.
It's more about the tolerance than the wattage.
Entropy512 said:
That shouldn't matter - however, 1/4 watt resistors are more likely to have good tolerance ratings than 1/2 watt ones.
It's more about the tolerance than the wattage.
Click to expand...
Click to collapse
I'm sure you are probably right that is not the wattage itself, but the tolerance, or something else that directly characteristic to 1/4 watt resistors, if there is anything else that would be directly characteristic to 1/4 (I wouldn't know).
But that seems to be the difference between the ones that don't work on the I777 that did work for the cappy.
Connexion only makes them out of 1/4 watt resistors now, and his jigs have worked on all the galaxy series phones ever since he started making them with 1/4 watt.
Sent from my SAMSUNG-SGH-I777 using XDA App
Racer447 said:
Yes! Just used it to clear my counter and get rid of the yellow triangle. I used this one, there are cheaper out there but I can vouch that this one works <snip>
Click to expand...
Click to collapse
I'm considering picking up this jig from mobiletech, esp. since I can get it for $6 in combination with a charger+extra battery.
One (n00b) question, though - I understand you can apply a pre-rooted firmware from XDA to the phone w/o the jig, so is the only reason for the jig to reset the "flash counter" on the phone, and are you doing this solely to ensure your phone remains under warranty? Or does the jig afford some other functionality (making rooting and/or applying custom ROMs simpler, or something else?)
If I order the jig but apply a custom ROM b4 it arrives, does that defeat the purpose of getting the jig, or can I apply the jig after applying a custom ROM and reset the flash/warranty counter without issue?
Here is a pic of mine, this is why I didnt make one. I like the fit and finish of these pre-made ones.
netarc said:
I'm considering picking up this jig from mobiletech, esp. since I can get it for $6 in combination with a charger+extra battery.
One (n00b) question, though - I understand you can apply a pre-rooted firmware from XDA to the phone w/o the jig, so is the only reason for the jig to reset the "flash counter" on the phone, and are you doing this solely to ensure your phone remains under warranty? Or does the jig afford some other functionality (making rooting and/or applying custom ROMs simpler, or something else?)
If I order the jig but apply a custom ROM b4 it arrives, does that defeat the purpose of getting the jig, or can I apply the jig after applying a custom ROM and reset the flash/warranty counter without issue?
Click to expand...
Click to collapse
It does put the phone into flash mode, way easier than trying to hold buttons etc.
highaltitude said:
It does put the phone into flash mode, way easier than trying to hold buttons etc.
Click to expand...
Click to collapse
Other than that convenience, is there any disadvantage to not using the jig until after one has flashed the phone? I was hoping to try flashing my phone today, but am unlikely to receive the jig until later this week if I order today.
netarc said:
Other than that convenience, is there any disadvantage to not using the jig until after one has flashed the phone? I was hoping to try flashing my phone today, but am unlikely to receive the jig until later this week if I order today.
Click to expand...
Click to collapse
As far as I know, jigs are only really needed when your device is unresponsive. Otherwise, it's purely for convenience and to get rid of the caution sign. Flash now, jig it later.
I was able to successfully clear my counter by using a home made jig. I used the same exact jig that i used for my captivate and i was able to get into download mode with no issues at all. My counter is now clear and i'm back to flashing (the correct way!).
I followed the instructions in this post, here, and i can confirm that 1/4 watt resistors seem to work pretty well. I also have a few 1/2 watt resistors laying around that i can test out if anyone is interested.
I used the generic radioshack brand resistors, you can pick them up for $1.50 at most locations.
The only problem that i had was that the USB is in a different location than on the captivate so i wasn't sure which pins i needed to make contact with. Flipping the phone upside down so that the USB was on top made it easier for me to see everything and find the right connectors. FYI, its the two right-most ones while holding the phone so the USB is on top.
Hope this helps someone!
Just used a jig yesterday. Works like a charm.
Sent from my SGH-I777 using XDA App
Yep. Jig works
Sent from my SAMSUNG-SGH-I777 using xda premium
Hi,
So i just damaged my Galaxy s2 i777 usb port the one in the bottom of the phone.Now the power fluctuates and the phone dont charge.
The one located in the bottom of the phone.
These are the product links - Please let me know which one is the corrscrt-
ebay.com/itm/Samsung-Galaxy-S2-SGH-i777-Charging-Port-Connector-Dock-Socket-USB-Port-/170828272114
ebay.com/itm/Lot-5-USB-Charger-Replacement-Port-Charging-Port-For-Samsung-Galaxy-S2-SGH-i777-/271064731058?pt=LH_DefaultDomain_0&hash=item3f1cb78db2
Please let me know which one is correct and which one will work
--------------------------------
Also will a samsung galaxy s2 - t989 work in India ??
My sim cards work with i777 just wanna confirm if it'll work with T989
http://item.mobileweb.ebay.com/viewitem?itemId=230831019596&index=15&nav=SEARCH&nid=93121220059
Yes it says i9100 but it works for the i777. I just bought from that link and replaced it my I777 with basically the same problem you have. Problem was solved (see "usb won't connect" thread in Q&A).
There's a YouTube video showing how to replace it on the i9100, which I followed and is extremely similar to the i777.
Sent from my SGH-I777
I must add, that you should really evaluate yourself, and decide if you have the skills to do it. It can damage your phone permanently if you don't do it the right way.
djluis48 said:
I must add, that you should really evaluate yourself, and decide if you have the skills to do it. It can damage your phone permanently if you don't do it the right way.
Click to expand...
Click to collapse
I'll take it to a sevice center and ask them to install it
Lekerstein said:
http://item.mobileweb.ebay.com/viewitem?itemId=230831019596&index=15&nav=SEARCH&nid=93121220059
Yes it says i9100 but it works for the i777. I just bought from that link and replaced it my I777 with basically the same problem you have. Problem was solved (see "usb won't connect" thread in Q&A).
There's a YouTube video showing how to replace it on the i9100, which I followed and is extremely similar to the i777.
Sent from my SGH-I777
Click to expand...
Click to collapse
you sure it'll work
cuz this will be the last part of my pocket money lol
you sure it'll work
cuz this will be the last part of my pocket money lol
Click to expand...
Click to collapse
100% positive. I promise I just used it in my I777 about a week ago. Heck, if you want to save cash I can install it for free for you. Just PM me if so.
Sent from my SGH-I777
Lekerstein said:
100% positive. I promise I just used it in my I777 about a week ago. Heck, if you want to save cash I can install it for free for you. Just PM me if so.
Sent from my SGH-I777
Click to expand...
Click to collapse
sure lol
who dont want to save cash
at the risk of necromancing.... if anyone should stumble upon this looking for help like I did, through google. When you open your i777 up, the port board in your i777 says i9100, so yes the above listed item would work.
herr kartoffelkopf said:
at the risk of necromancing.... if anyone should stumble upon this looking for help like I did, through google. When you open your i777 up, the port board in your i777 says i9100, so yes the above listed item would work.
Click to expand...
Click to collapse
I'll +1 that. That said, I replaced my port and it still won't charge! Any ides on what else might fix it? I suppose I could have gotten a bad replacement.
-- Bud
cduced said:
I'll +1 that. That said, I replaced my port and it still won't charge! Any ides on what else might fix it? I suppose I could have gotten a bad replacement.
-- Bud
Click to expand...
Click to collapse
I finally found a replacement port that works in the i777 after a couple of failed attempts. It is sold on ebay by muchbuy-outlet. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
cduced said:
I finally found a replacement port that works in the i777 after a couple of failed attempts. It is sold on ebay by muchbuy-outlet. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
I'm about about to purchase a new port as well and wanted to know if you had tried the one from the quote below without luck.
Lekerstein said:
http://item.mobileweb.ebay.com/viewitem?itemId=230831019596&index=15&nav=SEARCH&nid=93121220059 Yes it says i9100 but it works for the i777. I just bought from that link and replaced it my I777 with basically the same problem you have. Problem was solved (see "usb won't connect" thread in Q&A). There's a YouTube video showing how to replace it on the i9100, which I followed and is extremely similar to the i777. Sent from my SGH-I777
Click to expand...
Click to collapse
mymansionisabox said:
I'm about about to purchase a new port as well and wanted to know if you had tried the one from the quote below without luck.
Click to expand...
Click to collapse
Did not try that one. There is one on amazon that some one said in the comments worked with the i777 but I could not get it to work. Also, on ebay, one from ipartsdepot1 did not work. I also contacted several other sellers that said their's would not work. Hope this helps. -- Bud
cduced said:
I finally found a replacement port that works in the i777 after a couple of failed attempts. It is sold on ebay by muchbuy-outlet. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270993875674
-- Bud
Click to expand...
Click to collapse
Does this require soldering to install? Are there any instructions available? Thank you.
Edit: I found a video here which I think should help.
Won't charge?
Like rushaan stated that you should think before you go any further, if your battery will not charge it could be more of an issue than a charger. For the last week I have been trying to boot mine and only get one of 2 messages, The Samsung boot image, and I have done all most everything I have read in our forums. The last run, I had been re-installing some apps, after a ROM change,all was going great ,then a message came up Stating that "due to the battery heating up,it was shutting down the charger" so, of course battery was drained and con not get the freakin' phone to do anything but show the "SAMSUNG" boot animation.. NOW, since then I can not get it to boot, esp. into CWM recovery. I am still reading to see what file/image that I maybe able to use while utilizing ODIN. So,with that being said look a bit more in-depth before you think you have the correct solution.
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
Click to expand...
Click to collapse
This is great news. Will make a DIY one again soon.
Ps. Wrong section tho, ask mods to move to accesories or general.
Sent from my SM-G935F using Tapatalk
Heh i used to sell those back in the captivate days... good times
You are in the right Section to me! It's part of recovery, not an accessory in generic sense!
It was also able to reboot the tamper counter before, will it do so with the s7 ?
It'a good that I haven't lost my old USB jig from S2 days
EarlZ said:
It was also able to reboot the tamper counter before, will it do so with the s7 ?
Click to expand...
Click to collapse
That I can not say for sure...until we have root I can't say
shaq1907 said:
It'a good that I haven't lost my old USB jig from S2 days
Click to expand...
Click to collapse
I know right I happen to find mine and gave it a try and it work
Thread moved ok.
Thanks,
Bajanman
Bajanman said:
Thread moved ok.
Thanks,
Bajanman
Click to expand...
Click to collapse
Thank you..
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Click to expand...
Click to collapse
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
TehPirate_ said:
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
Click to expand...
Click to collapse
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
annson08 said:
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
Click to expand...
Click to collapse
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Hi, can you upload the video please and if possible, show a link to buy or make the jig.
Thanks in advance
Click to expand...
Click to collapse
@kitila,
I found this topic Googling for this same info, so thanks for reporting that the USB Jig still works with S7!
kitila said:
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
Click to expand...
Click to collapse
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Thank you for the correction on that I knew it was 100 something
Can anyone confirm that this really works? My S7 seems to be hard bricked
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
Can you point to where on ebay to get one? I can't seem to find the right search terms.
Thanks.
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
good to know, I've got a 1,000 pack of 10k resistors in my desk lol
It's not what you buy its what you build