Hi, first of all, sorry about my english. I think it's terrible.
I have a SE WT19 stuck on FXP bootloop.
I had installed a custom kernel, but i guess i did something wrong.
At first, my cellphone is on bootloop (in some custom ROMs) or just on black screen.
So, i tried to flash a new kernel with flashtool, or a stock Rom with PCCompanion, but my device is not recognized by Windows 7.
Also is not recognized by Linux, or Mac.
The kernel that bricked my LWW was wt19i-live-rage2.7-kernel-for-fxp-cm7.
There is something possible to bring it alive again?
Ever uninstall and install all drivers and tried in another pc, aways shows the same message.
"One of the USB devices attached to this computer is not working properly, and Windows does not recognize it. For assistance in solving this problem, click this message." :crying: :crying:
rsmaster said:
Hi, first of all, sorry about my english. I think it's terrible.
I have a SE WT19 stuck on FXP bootloop.
I had installed a custom kernel, but i guess i did something wrong.
At first, my cellphone is on bootloop (in some custom ROMs) or just on black screen.
So, i tried to flash a new kernel with flashtool, or a stock Rom with PCCompanion, but my device is not recognized by Windows 7.
Also is not recognized by Linux, or Mac.
The kernel that bricked my LWW was wt19i-live-rage2.7-kernel-for-fxp-cm7.
There is something possible to bring it alive again?
Ever uninstall and install all drivers and tried in another pc, aways shows the same message.
"One of the USB devices attached to this computer is not working properly, and Windows does not recognize it. For assistance in solving this problem, click this message." :crying: :crying:
Click to expand...
Click to collapse
First of all its not bricked..there are several information missing.Is your phone rooted & boot loader unlocked?With which rom did u try FXP kernel?Chech if u have the latest flashtool installed. Then go to driver folder & download the latest drivers. Connect ur phone in fastboot mode it should install the necessary drivers
saqib nazm said:
First of all its not bricked..there are several information missing.Is your phone rooted & boot loader unlocked?With which rom did u try FXP kernel?Chech if u have the latest flashtool installed. Then go to driver folder & download the latest drivers. Connect ur phone in fastboot mode it should install the necessary drivers
Click to expand...
Click to collapse
My phone was rooted and unlooked bootloader. I tried ALL CM7/9/10 roms posted in the xda development forum. I have the latest flashtool installed, also the latest drivers. When I connect my phone in fastboot or in flash mode, nothing happens,, cause my pc (and flashtool) do not recognize the device.
Okay but what happens when u connect ur phone to pc while pressing vol up button(without running flashtool)?does the blue led show & pc doesn't recognize it?if yes then go to device manager on my computer & see whats the problem with ur device,try installing it from there.Another question,can u get into CWM?
saqib nazm said:
Okay but what happens when u connect ur phone to pc while pressing vol up button(without running flashtool)?does the blue led show & pc doesn't recognize it?if yes then go to device manager on my computer & see whats the problem with ur device,try installing it from there.Another question,can u get into CWM?
Click to expand...
Click to collapse
When I press Up, turns on the blue led.
When I press Down, turns on the green led.
Device Manager displays: Unknow Device, and say I'm using the latest drivers, and something about Code 43 wrong.
I can get into CWM.
Nice then ur phone is perfectly okay :good:
just try another pc
or
unistall all related to ur device(flashtool,drivers,android sdk,pc companion,google usb) & reinstall.If that even don't work I suggest u to do a fresh install of windows.
See if it's a problem with the USB port. Are other devices connected to that port recognized? Some of the USB ports in the old PC at my home keep showing that message whatever I connect to it
saqib nazm said:
Nice then ur phone is perfectly okay :good:
just try another pc
or
unistall all related to ur device(flashtool,drivers,android sdk,pc companion,google usb) & reinstall.If that even don't work I suggest u to do a fresh install of windows.
Click to expand...
Click to collapse
Thnks..
I'll try it :fingers-crossed:
havocgb said:
See if it's a problem with the USB port. Are other devices connected to that port recognized? Some of the USB ports in the old PC at my home keep showing that message whatever I connect to it
Click to expand...
Click to collapse
The other device connected works fine...
Might be the phone's micro USB port is faulty???
Sent from my Xperia Mini using xda app-developers app
rsmaster said:
When I press Up, turns on the blue led.
When I press Down, turns on the green led.
Device Manager displays: Unknow Device, and say I'm using the latest drivers, and something about Code 43 wrong.
I can get into CWM.
Click to expand...
Click to collapse
The phone doesn't seem to be bricked. Try using Flashtool on another computer. Make sure you do have those fastboot drivers(when you first connect your phone to Flashtool in fastboot mode, Flashtool gives you a notification that drivers need to be installed for the device. I confirm that the ones provided in C:\Flashtool\drivers work for LWW )
(Always make sure the kernel is compatible with the ROM you're trying to flash)
Start with the stock kernel(the one provided inside the CM7/CM9 zip - boot.img). Then flash the relevant ROM and see what happens. Once that works fine, start tinkering with various kernels out there.
Don't worry, it's just a soft brick
I haven't bricked my WT19 yet but I did soft brick my former X8 and Someone else's Galaxy something...
What I can advise you do is flash the whole stock .ftf ROM from Sony, just search for the 4.1.B.0.587 firmware, flash it and start from scratch.
About your pc not recognizing your phone: how then did you flash the kernel?? Do have the Sony PC Companion installed on your machine? I have it just for the driveers, I know Flashtool comes with them but I rather have the offiicial somethimes... I think MediaGo also comes with them.
Anyhow, I hope you can get your phone working. Let us know how it went
gouthamthemostwanted said:
Might be the phone's micro USB port is faulty???
Sent from my Xperia Mini using xda app-developers app
Click to expand...
Click to collapse
Micro USB port works fine too.
Hi guys,
All tests done.
Other pc, or OS, do not recognize my device.
Tried another notebook, tried another windows version, another Linux and MacOS, nothing works!!
So, this process of kernel change could cause some hardware damage?
I really can't change the kernel in cwm recovery?
Just to recall, I can change the battery, got the phone in fasboot/flash mode, got CWM working, install new ROM but, or finish with bootloop or with black screen.
fragas16 said:
I haven't bricked my WT19 yet but I did soft brick my former X8 and Someone else's Galaxy something...
What I can advise you do is flash the whole stock .ftf ROM from Sony, just search for the 4.1.B.0.587 firmware, flash it and start from scratch.
About your pc not recognizing your phone: how then did you flash the kernel?? Do have the Sony PC Companion installed on your machine? I have it just for the driveers, I know Flashtool comes with them but I rather have the offiicial somethimes... I think MediaGo also comes with them.
Anyhow, I hope you can get your phone working. Let us know how it went
Click to expand...
Click to collapse
-About your pc not recognizing your phone: how then did you flash the kernel??
-My pc recognized until the latest kernel. After the new kernel, my problems begun.
I have PC Companion installed in my machine. Don't recognizes too.
One more time, sorry about the english mistakes.
I just speak portuguese^^
But I'm trying some comunication!!!
Format your Computer
Then to go http://forum.xda-developers.com/showthread.php?t=1799786 .... Next go to download PC SUS service update last version.... then install ... install too PC companic.... Next Installl flashtools next install Drivers on the folder Drivers Flashtoools.....
Next go to SUS service UPDATE and select your model device. then click Next.... |THENn Conect your device on modo flash modo...... Thennnnnn not go next step... Go oper Flastools and try flash file .tft Stock ROM.
I Have A SE LWW and i do the downgrafe to GB and then i root it...after that i go to PC Companion And I Do The Update That It Said...After That...I Lose My Root...I Have GB And Now Doesn't Appear The ICS Update....Can Anyone Help Me With This??? :crying::crying::crying::crying:
Johnyx1 said:
I Have A SE LWW and i do the downgrafe to GB and then i root it...after that i go to PC Companion And I Do The Update That It Said...After That...I Lose My Root...I Have GB And Now Doesn't Appear The ICS Update....Can Anyone Help Me With This??? :crying::crying::crying::crying:
Click to expand...
Click to collapse
just flash stock ftf of ICS 4.1.B.0.587 then get rooted. There are quite a lots of guide & links where you can get help from. In general & Q& A Threads
Are you connecting it to a USB 3.0?
Sent from my ST18i using xda app-developers app
IronBlossom said:
Are you connecting it to a USB 3.0?
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
no...
---------- Post added at 09:58 PM ---------- Previous post was at 09:42 PM ----------
saqib nazm said:
just flash stock ftf of ICS 4.1.B.0.587 then get rooted. There are quite a lots of guide & links where you can get help from. In general & Q& A Threads
Click to expand...
Click to collapse
can u help me with links?
Related
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom
Ok, here's the deal...
I'm trying to root my phone using a tutorial, so I have to flash .10 and .54 kernels.
When I connect the phone to the PC the Flashtool log says that the Debugging mode is off while, but IT'S ACTIVATED AT DEVELOPER OPTIONS.
So I can't continue...
PS: Flashtool drivers installed, Android ADB drivers installed
Sony PC Companion installed.
Have a Sony Xperia Sola MT27i, Windows XP SP3 and the last version of Flashtool.
Please help!
Sent from my MT27i using xda app-developers app
In order to flash the kernels u need not have to enable usb debugging
So here what u should do
Switch off phone
Keep it aside
Select kernel.ftf to flash in flashtool
Flashtool will ask u to connect phone in flashmode
Just press the volume down button (phone should b pff) of ur phone pressed and attach to usb
Try to restart Flashtool with your device already plugged in with USB Debugging on.
Sometimes happen with me. I just restart Flashtool and it detects it.
Thank you both, but if I connect the phone while holding volume down button can recognize the device?
Sent from my MT27i using xda app-developers app
manudo said:
Thank you both, but if I connect the phone while holding volume down button can recognize the device?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Yes it can
drsanket_xperia_u said:
Yes it can
Click to expand...
Click to collapse
Thank you man, I hope my phone don't get bricked.
Sent from my MT27i using xda app-developers app
manudo said:
Thank you man, I hope my phone don't get bricked.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Just dun flash anything that is not intended for ur phone
lenovo a690
doctor_droid said:
Just dun flash anything that is not intended for ur phone
Click to expand...
Click to collapse
good evening, i need some helps about the flastool using usb debug....
last night i intended to flash my a690 using another firmware that is s319. my reason was about to upgrade it to ics.
then i follow the instructions for flashing a690 using flashtool. it was succeed, i turn on the phone.... so the problem appeared, my phone can't login, even bootloop just in blank screen.
then i decided to back it firmware to stock rooom using flastool again.....and this information of error appeared.
i tried almost 3 hours by using another firmware but it wasn't succeed. i thought the error appeared because of the usb debug didn't click it.
so if there is anyone knew about this issued, please help me what should i do??
the first mistake that i had made so far was using another firmware fo my lenovo.
masjohnb0y said:
good evening, i need some helps about the flastool using usb debug....
last night i intended to flash my a690 using another firmware that is s319. my reason was about to upgrade it to ics.
then i follow the instructions for flashing a690 using flashtool. it was succeed, i turn on the phone.... so the problem appeared, my phone can't login, even bootloop just in blank screen.
then i decided to back it firmware to stock rooom using flastool again.....and this information of error appeared.
i tried almost 3 hours by using another firmware but it wasn't succeed. i thought the error appeared because of the usb debug didn't click it.
so if there is anyone knew about this issued, please help me what should i do??
the first mistake that i had made so far was using another firmware fo my lenovo.
Click to expand...
Click to collapse
Are you aware this is a forum for Xperia P U Sola and Go, we dunno no a690 or this flashtool :cyclops:
masjohnb0y said:
good evening, i need some helps about the flastool using usb debug....
last night i intended to flash my a690 using another firmware that is s319. my reason was about to upgrade it to ics.
then i follow the instructions for flashing a690 using flashtool. it was succeed, i turn on the phone.... so the problem appeared, my phone can't login, even bootloop just in blank screen.
then i decided to back it firmware to stock rooom using flastool again.....and this information of error appeared.
i tried almost 3 hours by using another firmware but it wasn't succeed. i thought the error appeared because of the usb debug didn't click it.
so if there is anyone knew about this issued, please help me what should i do??
the first mistake that i had made so far was using another firmware fo my lenovo.
Click to expand...
Click to collapse
Hello, necro-poster!
Didn't knew that Lenovo maked phones with Android OS, we always learn something everyday.
One advice, you can try to ask that in this forum.
And for all, my problem was solved, months ago. Thank you everyone.
minor driver bug try installing windows again ...
doctor_droid said:
In order to flash the kernels u need not have to enable usb debugging
So here what u should do
Switch off phone
Keep it aside
Select kernel.ftf to flash in flashtool
Flashtool will ask u to connect phone in flashmode
Just press the volume down button (phone should b pff) of ur phone pressed and attach to usb
Click to expand...
Click to collapse
its just a driver issue i had it many times in my laptop so i installed flash tool in my desktop
it was working fine ... and there is an bug in 64 bit version i think so
my phone not booting ,its showing xperia wave ....
when i try to flash it shows the debugging is off what i can do?
plz help me bro.... thank you ...
hope u helpme...
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!
doctor_droid said:
In order to flash the kernels u need not have to enable usb debugging
So here what u should do
Switch off phone
Keep it aside
Select kernel.ftf to flash in flashtool
Flashtool will ask u to connect phone in flashmode
Just press the volume down button (phone should b pff) of ur phone pressed and attach to usb
Click to expand...
Click to collapse
from where i can download kernel.ftf
Okay, I'm trying for some time now to root my phone. First time I did it did not work at all, but something changed on my phone, the PC does not recognize it anymore, I mean, if I plug it in, it says "ST27i device connected" but when I try to update to the new firmware 6.2.A.1.100 that I have to follow some steps (unplug USB from PC -> charge the phone battery to 50% -> turn off phone and wait 5s -> hold volume down and power key while plugging the usb cable) at that point (bold text) the phone is not recognized by the PC and therefore does not update. I'm still running with 6.1.1.B.1.10...
Can anyone help me?
Thank's a lot.
PS: I'm not usually here therefore I don't really know where my thread fits, so if it's not in the right place sorry, I'm just looking for some help.
gui.zanotelli said:
Okay, I'm trying for some time now to root my phone. First time I did it did not work at all, but something changed on my phone, the PC does not recognize it anymore, I mean, if I plug it in, it says "ST27i device connected" but when I try to update to the new firmware 6.2.A.1.100 that I have to follow some steps (unplug USB from PC -> charge the phone battery to 50% -> turn off phone and wait 5s -> hold volume down and power key while plugging the usb cable) at that point (bold text) the phone is not recognized by the PC and therefore does not update. I'm still running with 6.1.1.B.1.10...
Can anyone help me?
Thank's a lot.
PS: I'm not usually here therefore I don't really know where my thread fits, so if it's not in the right place sorry, I'm just looking for some help.
Click to expand...
Click to collapse
Did you unlock your bootloader at unlockbootloader.sonymobile.com? If you did, pc companion WONT recognise your device. Try looking around on how to relock your bootloader. I am not too sure. If you did not unlock, i am not really sure on what to do I have never unlocked my bootloader as i know the dangers of it.
Try asking the more senior members.
Sent from my LT22i using xda app-developers app
AndroidNoob69 said:
Did you unlock your bootloader at unlockbootloader.sonymobile.com? If you did, pc companion WONT recognise your device. Try looking around on how to relock your bootloader. I am not too sure. If you did not unlock, i am not really sure on what to do I have never unlocked my bootloader as i know the dangers of it.
Try asking the more senior members.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Hmm, no I did not unlock the bootloader, all I did was follow this guide to root my phone. Which the rooting was unsuccessful.
After that, I could not flash any other ftf files (not even update the firmware through PC Companion) because my computer was not recognizing my phone in flash mode, when I connect it turned on the pc recognizes it, but in flash mode it doesnt....
gui.zanotelli said:
Hmm, no I did not unlock the bootloader, all I did was follow this guide to root my phone. Which the rooting was unsuccessful.
After that, I could not flash any other ftf files (not even update the firmware through PC Companion) because my computer was not recognizing my phone in flash mode, when I connect it turned on the pc recognizes it, but in flash mode it doesnt....
Click to expand...
Click to collapse
Flash stock fw whit flashtool and You will be fine. ICS or JB is Your choise.
netmaniack said:
Flash stock fw whit flashtool and You will be fine. ICS or JB is Your choise.
Click to expand...
Click to collapse
He said he COULD NOT FLASH
Sent from my LT22i using xda app-developers app
---------- Post added at 06:01 PM ---------- Previous post was at 05:57 PM ----------
gui.zanotelli said:
Hmm, no I did not unlock the bootloader, all I did was follow this guide to root my phone. Which the rooting was unsuccessful.
After that, I could not flash any other ftf files (not even update the firmware through PC Companion) because my computer was not recognizing my phone in flash mode, when I connect it turned on the pc recognizes it, but in flash mode it doesnt....
Click to expand...
Click to collapse
Specify ROOTING UNSUCCESSFUL. I tried the same method on my xperia p before i went on jb. It successfully rooted. Like what went wrong? Did you flash back the original kernal? If you did not.......idk
Sent from my LT22i using xda app-developers app
Open the latest flashtool and select flashmode and browse for desired ftf file with out connecting ur device to ur system/laptop,...
After when when flash tool asks u to connect ur mobile den connect with volume down while plugging USB....
this surely works bcz it worked for me
Flashtool is not PC suite. Search the xda for that.
kalyan_kadari said:
Open the latest flashtool and select flashmode and browse for desired ftf file with out connecting ur device to ur system/laptop,...
After when when flash tool asks u to connect ur mobile den connect with volume down while plugging USB....
this surely works bcz it worked for me
Click to expand...
Click to collapse
Sorry, maybe I wasn't very clear. My PC does NOT recognize my Xperia Go in flash mode (which is the volumedown + powerbutton), not with PC Companion, not with flashtool, not at all, therefore I cannot flash anything, or even update my firmwares.
AndroidNoob69 said:
He said he COULD NOT FLASH
Sent from my LT22i using xda app-developers app
---------- Post added at 06:01 PM ---------- Previous post was at 05:57 PM ----------
Specify ROOTING UNSUCCESSFUL. I tried the same method on my xperia p before i went on jb. It successfully rooted. Like what went wrong? Did you flash back the original kernal? If you did not.......idk
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
I don't really understand what went wrong in the rooting process. Apparently it all went fine, the rooting tool said the device was rooted, but when I install apps that need rooting and should ask for root permission, none permissions are asked. Also another proof the my phone is not rooted is that when I use my phone's screen on my PC I can not press any buttons or write any text messages (as I read, I could only do that if my phone was rooted). And like I said, after that, my phone is not recognized by the PC in flash mode, so I cannot flash kernels, firmwares, nor can I update my firmwares using PC Companion.
netmaniack said:
Flashtool is not PC suite. Search the xda for that.
Click to expand...
Click to collapse
Yeah I know, what I said about the PC Companion is that it can no longer update my firmwares because my PC can no longer recognize my device in flash mode. And I used the flashtool to flash an older firmware, so I could root my phone, following the guide, which I refer on my question.
gui.zanotelli said:
Sorry, maybe I wasn't very clear. My PC does NOT recognize my Xperia Go in flash mode (which is the volumedown + powerbutton), not with PC Companion, not with flashtool, not at all, therefore I cannot flash anything, or even update my firmwares.
Click to expand...
Click to collapse
Try installing flashmode drivers from the drivers folder in flastool..................
if u have installed just unistall and restart and reinstall drivers annd again restart...
den it might work give it a try:good:
gui.zanotelli said:
I don't really understand what went wrong in the rooting process. Apparently it all went fine, the rooting tool said the device was rooted, but when I install apps that need rooting and should ask for root permission, none permissions are asked. Also another proof the my phone is not rooted is that when I use my phone's screen on my PC I can not press any buttons or write any text messages (as I read, I could only do that if my phone was rooted). And like I said, after that, my phone is not recognized by the PC in flash mode, so I cannot flash kernels, firmwares, nor can I update my firmwares using PC Companion.
Click to expand...
Click to collapse
Your case is wierd
Sorry but i can't help after you explained it clearly. Try a factory reset on your phone. All data will be lost duh. Proberly the system is in rw but something is not right.... Did you flash the original kernal back after using the root tool?
Sent from my LT22i using xda app-developers app
gui.zanotelli said:
Okay, I'm trying for some time now to root my phone. First time I did it did not work at all, but something changed on my phone, the PC does not recognize it anymore, I mean, if I plug it in, it says "ST27i device connected" but when I try to update to the new firmware 6.2.A.1.100 that I have to follow some steps (unplug USB from PC -> charge the phone battery to 50% -> turn off phone and wait 5s -> hold volume down and power key while plugging the usb cable) at that point (bold text) the phone is not recognized by the PC and therefore does not update. I'm still running with 6.1.1.B.1.10...
Can anyone help me?
Thank's a lot.
PS: I'm not usually here therefore I don't really know where my thread fits, so if it's not in the right place sorry, I'm just looking for some help.
Click to expand...
Click to collapse
I know this is the old thread but those who are having the same problem try to connect your mobile using USB 2.0. I had the same issue with USB 3.0.
I apologize for making this thread again as I misunderstood my device name previously (I thought it's a Play but it's a Ray)
http://forum.xda-developers.com/showthread.php?p=49236873
Is there any way for this device to unlock bootloader without connecting to the pc?
I can access fastboot (the blue light) but my pc doesn't say anything nor the device show up in device manager when connected, Flashtool doesn't detect anything.
Is there a way to install ROM without connecting to the computer, only accessing fastboot?
Thank you.
pinmemo said:
I apologize for making this thread again as I misunderstood my device name previously (I thought it's a Play but it's a Ray)
http://forum.xda-developers.com/showthread.php?p=49236873
Is there any way for this device to unlock bootloader without connecting to the pc?
I can access fastboot (the blue light) but my pc doesn't say anything nor the device show up in device manager when connected, Flashtool doesn't detect anything.
Is there a way to install ROM without connecting to the computer, only accessing fastboot?
Thank you.
Click to expand...
Click to collapse
I think there is No..way to unlock BOOTLOADER without connecting to pc..
Do U have fastboot drivers installed ????
If NOT ...then download this, then extract. and replace with that one in sdk (u need
to have Android sdk installed, if not
search google & install) http://
www33.zippyshare.com/v/22861267/
file.html
switch off phone then connect to PC by holding vol up key ur Pc ask for drivers ..
Then go to device manager find ur device right click on it and update driver by using that file which u extract in sdk and select boot loader interface ...Done...
Now do the process of unlocking Bootloader...
iF u don't want to unlock BOOTLOADER then install any custom rom based on ur stock rom via Cwm .....
DastanShaikh said:
I think there is No..way to unlock BOOTLOADER without connecting to pc..
Do U have fastboot drivers installed ????
If NOT ...then download this, then extract. and replace with that one in sdk (u need
to have Android sdk installed, if not
search google & install) http://
www33.zippyshare.com/v/22861267/
file.html
switch off phone then connect to PC by holding vol up key ur Pc ask for drivers ..
Then go to device manager find ur device right click on it and update driver by using that file which u extract in sdk and select boot loader interface ...Done...
Now do the process of unlocking Bootloader...
iF u don't want to unlock BOOTLOADER then install any custom rom based on ur stock rom via Cwm .....
Click to expand...
Click to collapse
My phone doesn't ask for any driver at all, much like it has never connected.
How can I install cwm without unlocking bootloader?
thanks mate.
Download XParts from playstore and you'll instal cwm
Sent from my WT19a with Next Gen V8 Rom using Xda App :good:
Membrillo007 said:
Download XParts from playstore and you'll instal cwm
Sent from my WT19a with Next Gen V8 Rom using Xda App :good:
Click to expand...
Click to collapse
Next roadblock then, how can I root the phone without a usb cable? I have sdcard and know how to place files there. Is there anyway to work around this??
unlockbootloader.sonymobile.com
Isnt it easiest method?
pinmemo said:
Next roadblock then, how can I root the phone without a usb cable? I have sdcard and know how to place files there. Is there anyway to work around this??
Click to expand...
Click to collapse
No, that's not possible
I guess you should try reinstalling all drivers from flashtool for all devices, or try installing PC Companion or SEUS. If that's not working, open the windows device manager and uninstall/update the drivers for your phone when it's connected
Sent from my Nexus 4 running Android 4.4
mihahn said:
No, that's not possible
I guess you should try reinstalling all drivers from flashtool for all devices, or try installing PC Companion or SEUS. If that's not working, open the windows device manager and uninstall/update the drivers for your phone when it's connected
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
thanks i'll try
pinmemo said:
Next roadblock then, how can I root the phone without a usb cable? I have sdcard and know how to place files there. Is there anyway to work around this??
Click to expand...
Click to collapse
Use eroot to root ur device easily..but drivers must be installed..
And if u want to root ur device without using computer u should give a try to Framaroot...
hello guys,
i have sony xperia u having STE 4.4.4 kitkat. but becouse my phone not recognise in any pc, i flash stock rom via TWRP recovery. so now problem is my XPERIA U is not recognize in any pc via flashtool so i can't flash ftf or any other rom. so plz anyone have any solution to fix this problem??
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
jebediaah said:
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
Click to expand...
Click to collapse
i traied it so many time but laptop does not recognize my phone as xperia u so it do not connect in ither flashboot or fastboot mode. and i installed all drivers which are neccessory. :
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
jebediaah said:
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
Click to expand...
Click to collapse
ya i have tried installing drivers via flashtool and i also changed charging socket because it seems like some hardware problem but problem is still existed....and i dont know about linux much so can you give me some brief???/
THANK YOU
MaDTH Bistata said:
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
Click to expand...
Click to collapse
i was using xperia STE 4.4.4 kitkat. and then i flash Stock JB 4.1.2. but i dont have rom in my SD card and it is also not connected to flashtool ( every time i connect to pc its show the massage of Device is not recognise )so i cant revert it back to STE 4.4.4 so now what shold i do????
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
9228
MaDTH Bistata said:
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
Click to expand...
Click to collapse
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
dont worry
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
try it
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1849170 check this and try it if you have any problems then contact me
data cable
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
MaDTH Bistata said:
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
Click to expand...
Click to collapse
Thanxxx buddy....
Reply soon
The_Ace said:
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
Click to expand...
Click to collapse
ya i tried it too
but no positive result.....
I have same problem which isnot sorted out yet
HEllow guys..
the simple solution that my device was needed was one soldering at charger connecting pin. i don't know at where that person did that soldering but now its recognize in every pc.
and thank a lot for your help in troubleshoot this problem