Hey everyone
I've been searching for hours now, but i can't find a solution to my problem.
I just flashed the new Omega V31 rom.. and after rebooting it my phone is stuck on the boot animation (looping the walking robot)
I can't get it back to CMW to reflash and I'm kinda clueless on what to do now
Help would be greatly appreciated
Xtincthed said:
Hey everyone
I've been searching for hours now, but i can't find a solution to my problem.
I just flashed the new Omega V31 rom.. and after rebooting it my phone is stuck on the boot animation (looping the walking robot)
I can't get it back to CMW to reflash and I'm kinda clueless on what to do now
Help would be greatly appreciated
Click to expand...
Click to collapse
Why you can't get back to CWM?
Did you pulled out the battery?
shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds
If CWM isn't working anymore you can go back to a stock firmware using sammobile.com and the program ODIN.
I have had this happen a few times..
What works for me
Hold volume up+Power+Home.
Wipe data/factory reset
Wipe cache
Wipe Davlik cache
Reboot.
As has been said you need to wipe data in CWM (vol up + home + power.)
Sent from my GT-I9300 using xda premium
EDIT: Solved
Related
hi every body i need help my sgs s 2 continue to bootloop and dont start y try to flash many times the firmware but notnig this happen because i make a wipe and factory reset why happen this now what i can do please help
jack_p75 said:
hi every body i need help my sgs s 2 continue to bootloop and dont start y try to flash many times the firmware but notnig this happen because i make a wipe and factory reset why happen this now what i can do please help
Click to expand...
Click to collapse
remove battery or power off device.
Hold down volume down + Power + Home buttons all at once to get download mode
then flash a stock rom.
Maybe villain rom latest as it wipes everything.
I got the same problem.
I already tried:
Flashing back to samsung stock,
wipe cache/dalviks
factory reset
flashing new rom
--waited 10 minutes boot loop--
took out battery,
waited 20 seconds
inserted battery, and rebooted
-- still bootloop
I don't know what i'm doing wrong.
Do this:
phone off
hold power + home + volume up. Select wipe data
Turn off device by long pressing power
Flash stock ROM or VR1.1 (it will wipe data on first boot anyway) via ODIN
Phone should boot
My phone is stuck in some kind of a boot loop... i can get it into download mode but cant get it into cwm. I have tried flashing lots of stuff via odin but it doesn't make any difference. Is there any way I can fix this?
weird O.O do you mean bootanimation is looping cause you can actually get into CWM before the bootanimation
nope clockwork mod has disappeared D:
After installing new ROM did u again wiped cache or data?? If so reinstalling would be better,,
I reinstalled using odin
try to reset factory settings and clear cache after installing...
TomAnkcorn said:
My phone is stuck in some kind of a boot loop... i can get it into download mode but cant get it into cwm. I have tried flashing lots of stuff via odin but it doesn't make any difference. Is there any way I can fix this?
Click to expand...
Click to collapse
By flashing via Odin with a stock rom, you'll loose CWM. You have to flash CWM again to get it back. But as you described it, you can't even get into Recovery mode (blue Samsung recovery screen with HOME+Power button combo)?
^^
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If u can't get to recovery mod then flash a new firmware from sammobile via Odin
Sent from my GT-S5830 using xda premium
I had this problem also.
I reloaded a new stock rom from sam and loaded it with odin, after the install I turned the phone on with the power button + the home button and did a factory reset and wipe catch.
And that worked.
u need to hold the power button + home button till you get in the menu.
I came from cm7.1 and went to stock rom 2.3.5.
Hope get it. Otherwise post your steps from which rom you came.
Sent from my GT-S5830 using XDA App
ginodp said:
u need to hold the power button + home button till you get in the menu.
Click to expand...
Click to collapse
or...
when phone is off, hold power button and home button in the same time.
when the phone is showing samsung, you can release the power button, but keep hold the home button until recovery menu showed
Hi i have galaxy s3
I was using Omega Rom happily since last month. But today i installed extended power menu and brightness fix mods from omega app. Then when the phone restarted it is stuck in boot (Samsung)
I did everything what could i do:
Re-installed CF-Root many times
Re-installed kernal siyah again
But nothing is happening its still stucked on the boot screen & it vibrates 2 3 times but the screen remains still on samsung logo
Guys plz tell me what should i do.
try to wipe cache and dalvik
Sent from my GT-I9300 using xda premium
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
themude said:
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
Click to expand...
Click to collapse
keep holding the power button, volume up button and the home button for around 15 seconds. You will be able to enter recovery mode. Happened to me too recently, when in Recovery mode just flash Omega Rom another time without resetting Data. Just wipe cache and Dalvik cache
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode ---press up button to continue and press down button to restart
This only takes me to download mode not in recovery mode
themude said:
how? CMW is not opening the phone is only able to open in download mode nothing else. Its a fault with OMEGA 8.1 mods or maybe siyah beta kernal
how to start in recovery mode? If i press the 3 buttons it takes me to download mode ---press up button to continue and press down button to restart
This only takes me to download mode not in recovery mode
Click to expand...
Click to collapse
Press VOLUME UP (NOT DOWN) + MENU+ POWER to get in recovery mode.
ohh damn i am such a noob...i was pressing down button....lol thanx a lot bro..May God bless u
Problem solved mods can close the thread if they want
Hello Everyone,
I had Jelly bombed rom v 7.0 (samsung gs3 sprint). I didn't wipe out data/ factory reset , so after flashing stock rom (factory one and then updated ones). Now it stuck on samsung logo flashing a in the background. So it seems like it trying find files or something. But not booting and turning on. I tried to put in recovery mode by vol up+home+power, but it don't work. I downloaded the jelly bombed from internet but it's a zip file so can't flash it with Odin. Help me Please!!!!
Thanks,
Dev
If you have a Sprint you are in the wrong forum
If you use odin, just run the stock rom over. I presume vol down and power takes you to download mode?
Sent from my GT-I9300 using xda app-developers app
Watenaccio said:
If you use odin, just run the stock rom over. I presume vol down and power takes you to download mode?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes, Thanks for replying. But It's now working. I was keep holding vol down + home + power util about 10 seconds but it never took me to the recovery. But the actual method is hold vol down + home + power and after 2-3 seconds leave the power button n keep holding other two. So I finally got to the recovery mode, deleted caches and wiped all data. After this restarted but the same problem. Finally re flashing solved the problem and it's working now!!
Hi guys.
I seriously need help right now.
My friend bought an s2 i9100 in cheep which was stuck on bootloop and he thought it could be repaired.
so we don't know what caused the problem.
But i was surprised that few repair shops weren't able to fix it.
let me explain the problem:-
when we hold power button or plug in a charger it show the logo, goes into recovery and reboots repeating it in loop.
so whenever i charge it goes into this loop.
we can use volume up & down key in those 2-3 seconds in recovery but not the power key.
we can access download mode and it doesn't reboots automatically but going into recovery mode manually also start this loop.
it's like we are only going in recovery mode again & again.
i installed this file "I9100XWLPW_I9100ODDLPC_I9100DDLPB_HOME.tar.md5" through odin and also used the pit file "I9100_STOCK-System_2GB-Data_512MB-Preload.pit" but nothing changed.
i don't know what to do now.
i cant find any gingerbread rom to test.
i don't know how it can be fixed,
so please help me.
Update
After doing a lot of things I finally managed to boot into system but the problem is not solved.
I flashed i9100XXLSJ which had modem and CSC files other than the PDA only.
The device actually booted in system (just the samsung logo) but it was a bootloop.
This time I kept holding power button by which the bootloop stopped and it successfuly booted but power button is not working inside the system so I can't reboot, power off or even switch on the screen.
By holding down up vol + home + power for a considerable long time I can boot into recovery. But again the power button is not working so I can't select any option.
I flashed a cwm touch recovery which is working.
So can anyone tell me what is the problem here and what can I do to actually fix it.
If you have problems with flashing stock ROM, consider flashing a custom ROM, like Cyanogenmod.
BenjyTec said:
If you have problems with flashing stock ROM, consider flashing a custom ROM, like Cyanogenmod.
Click to expand...
Click to collapse
The problem is not about flashing it's about the bootloop & tell me can I flash cyanogenmod with Odin?
@kuro2052
Try flashing the 4.1.2 JellyBean leak ROM via ODIN linked in this thread (scroll down to you see "Another option for i9100"):
[GUIDE][Troubleshoot a failed Odin flash]
This will factory reset the device which may hopefully resolve your problems.
gsstudios
gsstudios said:
@kuro2052
Try flashing the 4.1.2 JellyBean leak ROM via ODIN linked in this thread (scroll down to you see "Another option for i9100"):
[GUIDE][Troubleshoot a failed Odin flash]
This will factory reset the device which may hopefully resolve your problems.
gsstudios
Click to expand...
Click to collapse
Actually the ROM you are talking about is the ROM which I flashed which is mentioned in my second post " update".
PDA = CODE_I9100XXLSJ.tar
PHONE = MODEM_I9100XXLS6.tar
CSC = CSC_HOME_OXX_I9100OXXLS1.tar.
That's how I got this far, previously it was impossible to boot into system.
kuro2052 said:
After doing a lot of things I finally managed to boot into system but the problem is not solved.
I flashed i9100XXLSJ which had modem and CSC files other than the PDA only.
The device actually booted in system (just the samsung logo) but it was a bootloop.
This time I kept holding power button by which the bootloop stopped and it successfuly booted but power button is not working inside the system so I can't reboot, power off or even switch on the screen.
By holding down up vol + home + power for a considerable long time I can boot into recovery. But again the power button is not working so I can't select any option.
I flashed a cwm touch recovery which is working.
So can anyone tell me what is the problem here and what can I do to actually fix it.
Click to expand...
Click to collapse
In CWM touch recovery, you can swipe (or touch) to confirm the option.
Try factory reset. Reboot.
If that doesn't help, try wiping system, cache and data.
Let me know how that goes
gsstudios
gsstudios said:
In CWM touch recovery, you can swipe (or touch) to confirm the option.
Try factory reset. Reboot.
If that doesn't help, try wiping system, cache and data.
Let me know how that goes
gsstudios
Click to expand...
Click to collapse
Wiping data/factory reset and cache doesn't solve the problem.
There is format option in 'mounts and storage' so I formated system, data, cache & also emmc. But the bootloop is not gone. The only thing that is gone is the ROM because of those formats. I have yet to to install the ROM again.
maybe is a faulty power button... Do u have to push it down a little harder than normal?
affigne said:
maybe is a faulty power button... Do u have to push it down a little harder than normal?
Click to expand...
Click to collapse
It might be the problem of power button. Sometimes it boots as soon as I put the battery. It always boot when I plug in charger. Sometimes it boots after I press and hold the power key for maybe 15 second & sometimes it doesn't boot when holding power key & I have leave hold again to boot it. And important thing is when it boots, I have to hold the power key until the key lights up to stop it from bootloop but then the power is Jo longer functional in system. Same goes for recovery. But this is the only till nowROM which actually boots into system. Other ROMs were booting into recovery automatically.
I wanted to test cyanogenmod but I am not able to install twrp. I followed the steps here using HeimdallSuite https://twrp.me/devices/samsunggalaxys2i9100.html
I had no problem in the steps but the recovery is not actually replaced when I boot into it.
The recovery that I have currently is not able to flash isorec_twrp or any cyanogenmod directly. It always shows error code 7.
I am going to replace the power button with my friend's s2 (other friend who have an s2 laying around) only to see it works.
Anyways tell me how to install twrp successfuly.
The actual power button needs to soldered, I thought It would be a connector, so I am not going to do that. But as far as I can tell, the plastic button isn't the problem.
kuro2052 said:
It might be the problem of power button. Sometimes it boots as soon as I put the battery. It always boot when I plug in charger. Sometimes it boots after I press and hold the power key for maybe 15 second & sometimes it doesn't boot when holding power key & I have leave hold again to boot it. And important thing is when it boots, I have to hold the power key until the key lights up to stop it from bootloop but then the power is Jo longer functional in system. Same goes for recovery. But this is the only till nowROM which actually boots into system. Other ROMs were booting into recovery automatically.
I wanted to test cyanogenmod but I am not able to install twrp. I followed the steps here using HeimdallSuite https://twrp.me/devices/samsunggalaxys2i9100.html
I had no problem in the steps but the recovery is not actually replaced when I boot into it.
The recovery that I have currently is not able to flash isorec_twrp or any cyanogenmod directly. It always shows error code 7.
I am going to replace the power button with my friend's s2 (other friend who have an s2 laying around) only to see it works.
Anyways tell me how to install twrp successfuly.
Click to expand...
Click to collapse
Since I was on leaked JB firmware, what I did was to install philz recovery via android stock recovery, then install latest dorimanx isorec recovery/kernel, then install TWRP...
---------- Post added at 01:10 AM ---------- Previous post was at 01:09 AM ----------
kuro2052 said:
The actual power button needs to soldered, I thought It would be a connector, so I am not going to do that. But as far as I can tell, the plastic button isn't the problem.
Click to expand...
Click to collapse
check the battery contacts...