Related
Hi guys,
My O1 is dead. I'm gonna send it for repair but I have a question. I've rooted my device and even installed custom recovery; flashing several roms as well. When my phone went dead, it was on a stock 2.2 rom. Now for the question: Will they repair my phone for me? ^.-
Thanks
It depends, I heard ppl that had custom roms and they got their phone repaired
Just don't tell them anything and hope for good
If something inside is fried then you might not be so lucky.
Oohh... Btw I managed to flash my phone's firmware with kdz updater but when I used the official LG application to update my software, it totally screwed up. Irony, isn't it?
Lol. It's good you didn't turn it in then. They would have voided your warranty. You can only go and ask them to repair it for you when the flashing chip on the mobo is dead
Sent from my LG-P500 using XDA Premium App
But i can't turn it on now. Kdz updater can't even detect my phone
Joel Chan said:
Hi guys,
My O1 is dead. I'm gonna send it for repair but I have a question. I've rooted my device and even installed custom recovery; flashing several roms as well. When my phone went dead, it was on a stock 2.2 rom. Now for the question: Will they repair my phone for me? ^.-
Thanks
Click to expand...
Click to collapse
Mine was repaired, after failed on flashing a different stock ROM.
The previous working rom was the wrong official one but non-rooted
I got it back after a week with new PCB
morx said:
Mine was repaired, after failed on flashing a different stock ROM.
The previous working rom was the wrong official one but non-rooted
I got it back after a week with new PCB
Click to expand...
Click to collapse
Aww that's great haha were you questioned?
Joel Chan said:
Aww that's great haha were you questioned?
Click to expand...
Click to collapse
I reported that my phone rebooted itself asking for PIN password while i was in my living room watching TV having it on the table in front of me. I tried to enter password but it was stuck and i only could remove battery, after inserting the battery, phone was not responding at all!
They sent it to LG service case closed, phone repaired ^^
Honestly my phone was stuck in emergency mode lol I did take out the battery though
Joel Chan said:
Honestly my phone was stuck in emergency mode lol I did take out the battery though
Click to expand...
Click to collapse
If it shows some life signals, then you need to COMPLETELY BRICK it.
If it's completely dead, they
1) cannot find what have you done in it's software
2) they're gonna believe the story easier
3) they're gonna put a new PCB, so it's like having a new phone.
try and flash using kdz flasher use a stock 2.2 rom
press vol up + menu button and then connect the usb port to pc .
flash from kdz hope it works mine was dead too but i gt the phone back to life using the method and choose cs emergency while flashing
shhbz said:
try and flash using kdz flasher use a stock 2.2 rom
press vol up + menu button and then connect the usb port to pc .
flash from kdz hope it works mine was dead too but i gt the phone back to life using the method and choose cs emergency while flashing
Click to expand...
Click to collapse
Yep I tried that and wasted about two hours yesterday. It just didn't work
morx said:
If it shows some life signals, then you need to COMPLETELY BRICK it.
If it's completely dead, they
1) cannot find what have you done in it's software
2) they're gonna believe the story easier
3) they're gonna put a new PCB, so it's like having a new phone.
Click to expand...
Click to collapse
Hehehe I'm thinking of a story now
Hi guys
I sent my phone to the sevice center today. They changed my motherboard for me! The thing is; they didn't ask me any questions. I just told them that I couldn't turn on the phone haha!
Sent from my LG-P500 using XDA App
They will i have done it 2 times already they send me a new phone both times without question i rooted and installed custom roms
dislplin01 said:
They will i have done it 2 times already they send me a new phone both times without question i rooted and installed custom roms
Click to expand...
Click to collapse
I see... I have another question. When I attempted to update using the official LG Updater, my phone was such in recovery halfway through the process. It was still in emergency mode but according to the Updater, I was asked to remove the battery. My phone went dead right after that. Do you know why it went dead?
Sent from my LG-P500 using XDA App
Just for the record, I bricked my phone again. Sending it to the service center again zzz
Gr8 u can keep getting a new mobo every week
ccdreadcc said:
Gr8 u can keep getting a new mobo every week
Click to expand...
Click to collapse
LOL I don't mind haha. I'm just afraid that the ppl fixing my phone might have read this thread
Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
humaila said:
Hello everyone,
I've just bricked my S2.
It won't start at all.
I've flashed I9100XXLP1_I9100OXALP1_OXA and tried to root it with cf-root-sgs2_xx_oxa_ki3-v4.1-cwm4
After the root it won't start up, it was showing SAMSUNG and the yellow triangle with a ! in it.
I've tried to re flash the XXLP1 and it won't start flashing, so I pulled the data cable.
And now it won't start.
PLS HEEEELP!!!
I'm from Romania, maybe someone from Bucharest can help me.
It is not mine, and the owner is anxious to see it, I just wanted to help her unlock it, and..... (
pls help!!
thx a lot!!!
Click to expand...
Click to collapse
1) You didn't read instructions... Why would you try to root a XXLP1 >> ICS << Rom with a KI3 >> Gingerbread << CF-Root ? It states in Chainfire's thread to find the matching letters and root it with the corresponding kernel... You DIDN'T bother to read.
2) Like the poster above said, try entering download mode, and flashing stock ROM again... If you can't, read >> 4)
3) You can try with a USB Jig, though i doubt it will help...
4) Seems like it's completely bricked, probably will need jtag repair, or maybe you can get lucky with warranty + samsung repair service
5) Learn to read...
E_Goldstein said:
try a usb jig but seems like its a complete brick if it will not turn, needs jtagging by the sounds of it,
Click to expand...
Click to collapse
this is what I want to do next
thx
sopheaknhek said:
can you go into download mod? flash stock firmware in download mod via odin by press volume down +home button + power.
Click to expand...
Click to collapse
nope, it's completely dead
@gr4ndm4st3r_bl4ck
yes, my bad
do you think that if I send it back from where I bought it and lie them that it didn't start at all, and that I didn't do anything they will replace it?
it is worth it to try or they will figure it out?
thanks
You could send it into your carrier/Samsung for repair & they might repair it anyway, but there's a much greater chance they'll charge you for it.
A jig is very unlikely to work, but for the sake of a few dollars is worth a try.
Do a search for JTAG repair on here/Google (here's one to get you started). This will probably be cheaper than having it repaired by Samsung/whomever does their repairs in your country.
Which option you choose is obviously up to you.
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
gr4ndm4st3r_bl4ck said:
As MistahBungle said, you could try taking it to samsung and they might repair it under warranty,no questions asked...then again,they could charge you more likely than not... If that happened to me I would take the phone to samsung as i don't trust those shady guys doing jtag repairs... they fu** something up, you lose warranty, you get left without a phone...my 2 cents
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
humaila said:
I sent it back to them.
Reason: I tried to update via Kies and it went black.
They said it will be replaced -> YEEEEY!!!
Thanks a lot for you concern.
Click to expand...
Click to collapse
No problem dude, glad you managed to get it under warranty Just make sure you read the instructions carefully next time
hi everybody!
all the steps below were taken from galaxys2root.com as well as the files
i have i9100 with a stock rom 2.3.4 (ki4) (and 1.4gb of free memory-maybe that was the problem).
yesterday i rooted it (everything was fine) and then i installed CWM recovery 4.0.1.4 through odin v1.85 (went fine too) and then on my way to find myself a new rom i decided to backup my current one with cwm. then i entered cwm by pressing vol-down+pwr+home and hit "backup". it backed up the system and then moved on to the data and thats where it got stuck for like an hour.... from the guide i understood that it shouldnt take more than 10 min- 15 min top so i figured that im having a problem, i tuned off the phone by pressing pwr button and turn it back on, then the phone got stuck on the sgs2 screen with the triangle so i turned it off again----> this time it didnt came back on, and not responding to download mode neither to polling battery out or not even by connecting to usb and charger- just dead!
how is it possible? and what should i do to bring it back to life? (and myself)
thank you very much(please help...), and sorry for the long text and the bad english
do you have usb jig with you?
i assume you brick your phone.
read my thread http://forum.xda-developers.com/showthread.php?t=1402286 carefully. anyway, usb jig will not harm your device
No download mode = try jig. Jig doesn't work = JTAG repair by 3rd party repairer (cheaper option) or JTAG repair my Samsung (more expensive option).
thank you,
no dont have one but i ordered from ebay.
is there a chance that my battery died and as a result of the two my phone wont respond?
Possible but highly unlikely. I guess you might as well try a new battery, at worst you'll have a spare when you get the phone repaired.
Fairly common problem go to forum xx download something and follow the instructions dont work go to a totally different forum and ask why ???
CWM 4 very old .
vol-down+pwr+home and hit "backup why ??? thats download mode
My guess would be wrong instructions/firmware .
The other question to ask is it a i9100 or a different version .
jje
i really hope thats the problem, im going to a friend now to try with his battry.
but really how is it possible that my phone is bricked when i didnt even try to flash a new rom, and more than that it happened in the backup process when all the cwm does is a copy operation... so what really had happened?
JJEgan said:
Fairly common problem go to forum xx download something and follow the instructions dont work go to a totally different forum and ask why ???
CWM 4 very old .
vol-down+pwr+home and hit "backup why ??? thats download mode
My guess would be wrong instructions/firmware .
The other question to ask is it a i9100 or a different version .
jje
Click to expand...
Click to collapse
to be honest i was too lazy to search here (which im not going to be now)
thats what he was doing in the video (it did went in cwm)
and my phone is i9100 i bought it in the UK
Wrong firmware faulty firmware wrong instructions any number of things can go wrong with a flash . But it is very odd that it happens in backup recovery yes but backup very rare .
jje
JJEgan said:
Wrong firmware faulty firmware wrong instructions any number of things can go wrong with a flash . But it is very odd that it happens in backup recovery yes but backup very rare .
jje
Click to expand...
Click to collapse
so there is a slight chance that its the battery right?
IIIMJRIII said:
so there is a slight chance that its the battery right?
Click to expand...
Click to collapse
no, there is not.
Sent from my GT-I9100 using xda premium
ok the battery swap doesnt work so its not the problem,
any other ideas??? (except usb jig and jtag)
thanks
Jig <=1% chance of getting you into download mode, JTAG = 100% chance of fixing it. Other options = 0.
MistahBungle said:
Jig <=1% chance of getting you into download mode, JTAG = 100% chance of fixing it. Other options = 0.
Click to expand...
Click to collapse
I should say jog = 50% chances of getting into download mode. JTAG is more like a solution for hard brick(totally unresponsive, bootloader totally mess up, brain system totally corrupted).
Base on my understanding, getting yourself a hard brick is harder than finding a needle in a haystack. If you go through zedomax(galaxys2root.com owner), he mentioned that he flashed all his android device countless time. All he got is just a couple of soft brick. Never a hard brick. Don't waste your money first. Invest on a cheap usb jig which only cost around 2 dollar, compare to JTAG services which cost 50 dollar.
If usb jig doesn't work, try to go for warranty , see whether they charge you or not. If warranty doesn't cover you and cost less than 50 dollar to repair, go for it.
Only go for JTAG if every effort above don't work.
Warning: JTAG is just a service that reinject Samsung firmware into your device. If your phone has hardware failure, I don't think they can help. Unless they provide hardware repair now. If you wanna be sure, email or call them up to see if they provide hardware repair/replace as well, just in case it is a hardware failure cases.
Sent from my GT-I9100 using xda premium
i know its a very rare situation but it happened. I've tried the jig and it didnt work, then i decided to send it back to the store and they told me they have sent it to the manufacturer, now im waiting...
Hi!
I just had the weirdest experience with my sgsii
I have been using the unofficial vsync patched cm10 rom for this modelfor the last month or so.
I have been updating at least one per week but this week I decided to give my phone a break and not flash it... i am actually really busy at job.
Suddenly tonight, the phone looked like when you have a SOD... so i just pulled the battery.
Now, it does not pass from the first logo stage, just prior to start booting.
I cannot access cwm recovery either, but download mode seems to work-
Now the odd thng is that i am attempting to flash somethng to get the phone working but it gets stuck in the step "NAND Write start!".... it goes no furter than that...
I have chosen the options auto reboot and f.reset time.
a pda file, phone and csc file from the eaked jb rom.....
The system I am attempting to flash from is a windows 7 pro 64 bit.... and odin is Odin3 v1.85...
Please, tell me i didnt get a brick and there is a way tofix it... :crying:
EDIT: Desperated, i tried to flash latest jb leak again, and chose the pit file that comes with it, which re-partitions the phone...
After 20 minutes not responding, i pulld the battery out... now i cannot even enter download mode....nothing....nada....
Sounds like you bricked it, good job.
Sent from my GT-I9100 using Forum Runner
GFXi0N said:
EDIT: Desperated, i tried to flash latest jb leak again, and chose the pit file that comes with it, which re-partitions the phone...
After 20 minutes not responding, i pulld the battery out... now i cannot even enter download mode....nothing....nada....
Click to expand...
Click to collapse
too bad never repartition unless you make your own pit file with heimdall .. if you would've wait a couple hours I just pmed you.
and for other people instead of flashing samsung's bricksquadroms you can flash CM9 resurrection edition. http://forum.xda-developers.com/showthread.php?t=1419102
Make a pit file with heimdall of your own device. Don't trust pitfile that comes with a rom.
I re-partitioned my device and i got like 3GB intern memory back.
There's probably a way to get your device alive. it isn't the mmc cap bug so. search some threads on xda about brickbugs etc of galaxy phones and you'll find people who hardbricked and unbricked their device.
Probably usb jig could get you into download mode i'm not sure though. Or else jtag. Ask some people over there they will know it
I will try to revive it with jig.... i must find the thingy though.,..... if not.. i will send it to the service but i'm not sure i'm on warranty....
Being not patient made me f*ck it up bad....
Any clue on how to recover a phone after re-partitioning.... i really don't know where to start...
EDIT: JIG does not switch it on either... why did i have to re-partition?!??!?!?!?!?!
That was a dumb move....... any more ideas?
If you cant enter recovery or download mode you have no choice but to JTAG repair or mobo replacement.
Hard brick.... on its way to service
Wish me luck..
Mobo replacement it is, this incident will at least teach you to be patient, I explained you my problem in PM, I waited for 1 week for USB jig to arrive from eBay then flashed stock ROM. I trust the f/w it came with the most.
Sent from my GT-I9100 using xda app-developers app
Sh4Dy said:
Mobo replacement it is, this incident will at least teach you to be patient, I explained you my problem in PM, I waited for 1 week for USB jig to arrive from eBay then flashed stock ROM. I trust the f/w it came with the most.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
USB JIG didn't work at all..... I have one and it was not able to boot the phone ....
Isn't this kind of brick fixable with Jtag?
Sent from my GT-I9100
Ok, before I repartitioned, making the problem worse, I was experiencing some kind of R/W problem..... there was something odd with the nand because I was able to boot in download mode, but not in recovery (CWM) mode....
Then, when I plugged the phone to the computer, Odin was able to recognize the phone.
I followed some thread around XDA to flash 4.1.2 leak from sammy and when I hit the "Start" button in Odin, it would not pass from the first stages, revealing that R/W or I/O problem.... the internal nand was, somehow broken.... it didn't read or write properly.... so, even If i could find a workaround, I would have lost some internal storage (some posts talk about around 3 Gb or something similar as lost space in these cases).... that is IF i had been able to fix it..... but then, that's what warranty is for..... so I gave it a last (dumb) try..... including the pit file, which attempted a format, which ended messing (i would say the f. word) everything up.
The good side is that unable to even boot, at least i lost the blue loading bar the vsync patched cm10 mod has in the first bootup screen.... which could have revealed to sammy that I was tempering with unofficial roms....
Lesson learned: Be patient people: But also, don't think this could not happen to you: The phone was perfectly working the last time I saw it... and I even was making some phone calls and browsing the internet.... I mean... it gave no prior symptoms or warnings... I t just died..... I guess I have to be glad I'm not one of those people whose phone gets caught up on fire on their pockets for malfunctioning.....
Now waiting for it to come back revived from samsung..... I have hope
hope it will be able to recover
Great: After losing the phone and past almost three months, samsung says the phone has been manipulated and the warranty is voided....
I wasn't able to flash back an original firmware prior to sending it to the tech service.....
What do you recommend me to do?
I guess paying for the repair would be quite expensive....
GFXi0N said:
Great: After losing the phone and past almost three months, samsung says the phone has been manipulated and the warranty is voided....
I wasn't able to flash back an original firmware prior to sending it to the tech service.....
What do you recommend me to do?
I guess paying for the repair would be quite expensive....
Click to expand...
Click to collapse
Well what is it you expect us to say, some secret magic word that will fix it for free?
The choice is pay for it to be fixed or dont.
So no magic word or secret passphrase so they will upgrade my device to a SGSIV for free?
Damn.....
I'm asking for advice, since I'm convinced the brick was not caused by flashing anything.....
Does anyone have any experience with this in the past to know more or less how expensive bill could I be facing for the repair?
GFXi0N said:
So no magic word or secret passphrase so they will upgrade my device to a SGSIV for free?
Damn.....
I'm asking for advice, since I'm convinced the brick was not caused by flashing anything.....
Does anyone have any experience with this in the past to know more or less how expensive bill could I be facing for the repair?
Click to expand...
Click to collapse
Dude, it WAS caused by flashing something.
Initially your device wasn't "bricked" and was likely a kernel issue and possibly a dirty usb data connection.
The point when it was bricked was when you tried flashing the pit file, had bad connection and you then pulling battery. This f**ked your nand chip up and only way to fix it is to replace motherboard.
You will need to either purchase a mobo replacement and replace it yourself or pay somebody to purchase/replace it for you. Probably looking at around £100.
When bricks happen, you really need to BRICK it before claiming warranty.
I've got a couple of guys here that own a PhD in bricking.
Brick is the new flash.
Sent from the little guy
Jig wasn't working
Flashing anyting.. even just a recovery wasn't working
FLashing official didnt work
Flashing CM didnt work either
Tested different cables and different ports
It was f*cked up already... anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence...
Repartitioning erased my tracks, if anything... because the 3 key combo for recovery was working until then..... but either way they managed to access the memory somehow, I guess.....
GFXi0N said:
anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence....
Click to expand...
Click to collapse
Maybe a PEBCAK?
GFXi0N said:
Jig wasn't working
Flashing anyting.. even just a recovery wasn't working
FLashing official didnt work
Flashing CM didnt work either
Tested different cables and different ports
It was f*cked up already... anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence...
Repartitioning erased my tracks, if anything... because the 3 key combo for recovery was working until then..... but either way they managed to access the memory somehow, I guess.....
Click to expand...
Click to collapse
Don't blame the phone, blame the user.
Yeah, sure... anyway... thanks for the help... I hope some day you need it and someone will come not trying to mocking you..... anyway... this is the trend around here lately...
Happy trolling
Dear Forum members i am new to this forum please help me to boot up my Phone :
After rooting using odin i have installed custom rom all working fine later tried to install another using odin selected .PIT file & re partition was checked in the middle Odin stopped responding disconnected the phone & phone stopped as attached image later battery empty. Now its completely dead no light no logo no boot sign tried to enter download mode, recovery mode, connecting to pc using kies, Odin nothing working.
Please help me to get the phone back to working
Thanks in advance
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Cosmic Blue said:
Unfortunately because you played around with the PIT file unless advised means that your phone is bricked.
Since you cannot get into any mode at all, the only method that might work to fix your phone is a Jtag device.
Click to expand...
Click to collapse
Thanks for quick reply. can you please tell me where Jtag is available in India people who do it?
Thanks in advance.
For the first time i used forum and its really helpfull.
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
chetankalburgi said:
Hi,
Yes previously it was showing as attached image then i have switched off & switch on back then no indication. completely dead just like a phone with out battery.
tried connecting to pc in all types( using all software's & drivers) not working. now only hardware part is pending.
Click to expand...
Click to collapse
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
ctomgee said:
Oh. Well, if it's completely dead now, and no longer shows that screen, than Cosmic Blue's statement is probably true. JTag it is.
Use Google to try to find a repair shop near you that offers this service. If you can't find one close to you, you'll probably have to mail it off to a shop that does it.
Click to expand...
Click to collapse
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
ctomgee said:
If he's still getting the screen that he posted in his first post, then it does NOT mean it is bricked beyond repair. In fact, you should be able to flash using Odin while that screen is up.
I've only ever seen people get that screen when they either flashed an I9100G ROM or firmware to an I9100, or the reverse. (flashed an I9100 ROM or firmware to an I9100G)
OP, I'd make absolutely sure you are flashing a ROM or firmware that is meant for your model of device.
Click to expand...
Click to collapse
@OP: I'm with this guy. Try a usb jig before jtag.
chetankalburgi said:
Thank you
Sent to Samsung service center got reply as mother board faulty & has to change Price 9000 INR tried speaking about jtag & USB Jig with service center people even they have no clue about these words.
Click to expand...
Click to collapse
Customer service may not know but if you talk to the technician he will know but may not want to do it as they will not make as much money as replacing the motherboard.
If you check the service manual that are posted on in this forum. one of the steps before replAcing the motherboard is using jig then jtag before you replace MB.