Hi,
A couple of months back I rooted my Samsung Galaxy S2 using Odin 1.85. My phone is a UK I19100, on Three. Today, I wanted to unroot it, so being a fool, I followed the guide at galaxys2root. com
I have downloaded firmware for a different carrier, and when starting my phone, I have error messages such as 'android.process.acore has stopped working' and I find that the 3 store has disappeared. Also, the phone no longer works, being extremely slow and unresponsive.
Please could someone guide me on how to get back to the latest official Three UK stock kernel and firmware for the SGS2.
Thanks guys, much appreciated, really stuck here.
Gabble1
gabble1 said:
Hi,
A couple of months back I rooted my Samsung Galaxy S2 using Odin 1.85. My phone is a UK I19100, on Three. Today, I wanted to unroot it, so being a fool, I followed the guide at galaxys2root. com
I have downloaded firmware for a different carrier, and when starting my phone, I have error messages such as 'android.process.acore has stopped working' and I find that the 3 store has disappeared. Also, the phone no longer works, being extremely slow and unresponsive.
Please could someone guide me on how to get back to the latest official Three UK stock kernel and firmware for the SGS2.
Thanks guys, much appreciated, really stuck here.
Gabble1
Click to expand...
Click to collapse
You don't have to flash stock firmware to unroot your phone...
You can flash any country's firmware you want, as long as it's for your device. So I suggest flashing the latest I9100XWLPX firmware.
http://forum.xda-developers.com/showthread.php?t=1544487
Be careful in the future, I don't trust any site other than XDA
i360* said:
You don't have to flash stock firmware to unroot your phone...
You can flash any country's firmware you want, as long as it's for your device. So I suggest flashing the latest I9100XWLPX firmware.
http://forum.xda-developers.com/showthread.php?t=1544487
Be careful in the future, I don't trust any site other than XDA
Click to expand...
Click to collapse
Thanks for the link and your quick reply. Will this work for a UK Three SGS2? I don't want to install something that will mess it up
I installed this firmware: I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5 before, and it ruined the phone, the three store had gone, the phone unresponsive, whenever touching an icon it crashes and needs reboot etc.
Also, will this firmware put it back to original factory software, ie. stock everything ICS and unroot?
Sorry, kinda a newbie at this.
Thanks,
gabble1
gabble1 said:
Thanks for the link and your quick reply. Will this work for a UK Three SGS2? I don't want to install something that will mess it up
I installed this firmware: I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5 before, and it ruined the phone, the three store had gone, the phone unresponsive, whenever touching an icon it crashes and needs reboot etc.
Also, will this firmware put it back to original factory software, ie. stock everything ICS and unroot?
Sorry, kinda a newbie at this.
Thanks,
gabble1
Click to expand...
Click to collapse
XXLPX is stable. Download the 3 app from Google Play once you install the firmware
Sent from my GT-I9100 using xda premium
XWLPY runs perfect and released in the UK.
Worked perfectly, thank you all
Sent from my GT-I9100 using xda app-developers app
Related
Searched around a lot about this, and just really need some clarification.
When connecting to Kies I'm prompted about the latest firmware PDA:KG5 / phone:KG1 / CSC:KG1 (XSG.) Is this the official release of 2.3.4 or 2.3.5? and what is the proper term to call this update by, KG5 or KG1 (not sure if you use the PDA # or the phone/CSC # to state which firmware Im using during online conversation.)
Also I am currently rooted on PDA:KF3 / Phone:KF1 / CSC:KF2 (XSG.) Which is 2.3.3. I know I will loose my root / super user status if I do the firmware update via Kies.
If I do update to the KG5 firmware listed above, what is the best method to root? If the firmware update I listed above is 2.3.4, Can I use the same method as listed all over the place to root the leaked version of 2.3.4 that came out in early July (I believe it was KG3?) The method is pretty much Orion & super one click.
If the firmware update I listed above is 2.3.5, what is the best way to root it? All in all, I'm not sure if you can root a stock release from Samsung the same way as a leaked version.
Thanks in advance everyone, this is my first Android phone after years in IOS so I apologize in advance if my question makes no sense. I'm doing my best!
Don't get too much confused.
It's an official release and you should update. No way it will be 2.3.5. Then you could use Chainfire's kernel for root. Normally we quote the PDA version as firmware, so you could quote it as KG5.
Link to CF kernel thread,
http://forum.xda-developers.com/showthread.php?t=1103399
Regards.
Thank You very much for the clarification.
I will try that out.
I would flash with odin, kies might brick your phone. by the way, you can flash cf kernel again, but first install original firmware. It must be three parts and a pit file,
Repartition box should be checked.
You will lose your data, secure your phone with titanium backup then you can restore you apps and give them back their memories.
hope it helps.
Sent from my GT-I9100 using XDA App
SupraN0va said:
kies might brick your phone.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Hold on mate, Kies would brick your phone?
Well well well, I haven't heard this ever and I don't think it is true. Bricking a device is not an easy thing. Well I like Odin too, that's because of it has some other connection/drivers problem sometimes, but 'Bricking'? Nah, Negative.
The other thing is, I'd always recommend update via Kies if the user is new comer and have less idea about upgradation, he could do some mistakes in Odin, but never in Kies.
Regards.
ithehappy said:
Hold on mate, Kies would brick your phone?
Well well well, I haven't heard this ever and I don't think it is true. Bricking a device is not an easy thing. Well I like Odin too, that's because of it has some other connection/drivers problem sometimes, but 'Bricking'? Nah, Negative.
The other thing is, I'd always recommend update via Kies if the user is new comer and have less idea about upgradation, he could do some mistakes in Odin, but never in Kies.
Regards.
Click to expand...
Click to collapse
Thanks ithehappy. I looked hard to find this thread and glad for it. I was about to flash from KF2 to the new one offered by the updated Kies software - firmware version KG5 in my case. Atm I have a rooted phone and replaced the stock XXKF2 kernal back using ODIN successfully using the one offered here somewhere on XDA. (got rid of the yellow triangle issue on boot).
Do you think if I flash using Kies all will be right??? Just got nervous from what the other poster said... I am not overly interested in rooting again, It was mere experimentation that made me do it in the first place. Cheers & thanks for your time.
To mooksy
if you have replaced the unofficial firmware or kernal back to the original everything will be fine.The only problem you will have is that if you havent replaced all the non-official with official then kies wont recognise your phone anyway and you wont be able to update that way.
KF2 to KD5 firmware upgrade via Kies 2.0 update
cooza said:
To mooksy
if you have replaced the unofficial firmware or kernal back to the original everything will be fine.The only problem you will have is that if you havent replaced all the non-official with official then kies wont recognise your phone anyway and you wont be able to update that way.
Click to expand...
Click to collapse
Thanks cooza, I have read the thread on here concerning the KD5 update and a lot of people make the process sound really confusing to say the least, obsessive IMHO . Is it worth the trouble updating the SGS2 right now? Afterall my phone is fine and I thought rooting would be some kind of epiphany but to me its just... (shrugs shoulder)
SupraN0va said:
I would flash with odin, kies might brick your phone. by the way, you can flash cf kernel again, but first install original firmware. It must be three parts and a pit file,
Repartition box should be checked.
You will lose your data, secure your phone with titanium backup then you can restore you apps and give them back their memories.
hope it helps.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
WTF?
PIT FILE? REPARTITION?
WTF?^2
Please don't advise people to use PIT files and Repartition unless you are going to back them up with a replacement phone.
Please remember, most pple who come here are really not very experienced and don't really know what they are doing.
JKDEM85 said:
Searched around a lot about this, and just really need some clarification.
When connecting to Kies I'm prompted about the latest firmware PDA:KG5 / phone:KG1 / CSC:KG1 (XSG.) Is this the official release of 2.3.4 or 2.3.5? and what is the proper term to call this update by, KG5 or KG1 (not sure if you use the PDA # or the phone/CSC # to state which firmware Im using during online conversation.)
Also I am currently rooted on PDA:KF3 / Phone:KF1 / CSC:KF2 (XSG.) Which is 2.3.3. I know I will loose my root / super user status if I do the firmware update via Kies.
If I do update to the KG5 firmware listed above, what is the best method to root? If the firmware update I listed above is 2.3.4, Can I use the same method as listed all over the place to root the leaked version of 2.3.4 that came out in early July (I believe it was KG3?) The method is pretty much Orion & super one click.
If the firmware update I listed above is 2.3.5, what is the best way to root it? All in all, I'm not sure if you can root a stock release from Samsung the same way as a leaked version.
Thanks in advance everyone, this is my first Android phone after years in IOS so I apologize in advance if my question makes no sense. I'm doing my best!
Click to expand...
Click to collapse
1. It would be the release of 2.3.4 as as the other on has not been leaked yet,
there is only one trial version in the CM7 but it is a work in progress.
2. You would call it by its PDA # KG5. CSC and Phone can be any
combination depend on which country you are in.
3. yes, after flashing you will need to reroot again.
4. Just use chainfire Kg5 root. You will not need to use super one click as
chainfire has done all the work for you.
use this thread for rooting.
http://forum.xda-developers.com/showthread.php?t=1103399
5. you can root a stock version the same as a leaked version. You may have to
wait a day or so till chainfire has made a root for it. He is usually on top of
it as soon as someone sends him the kernal.
MOOKSY
If you are happy with your phone and your not much of a flasher or rom changer and all that then just stay as you are if your happy.Unrooting and flashing to the lastest via kies is also a good idea cos kies is an official update so can only bring good things,right.If you feel the need then re-root.Kies is always a safe bet if your new to updates and at least they are all offiall so if something did happen samsung would have to cover it while odin is an "at your own risk" deal.
COOZA
Sorry off-topic (ish) I read that you bricked two of your phones using tar files for sgs2 on sgs, did you manage to jig it back to life and with any success? I want to root again after using Kies for KG5 update. but now i'll use CF's work on here. After reading that other sites could result in potential disaster I think I was lucky , i too just googled a random site for the rooting kit.
Unfortunatly for me i damaged the bootloader so the jig wont work.Im going to have to find someone with a riff box jtag and see if that works.I hope its does.If i cant find anyone with one ill just have to buy it myself.Worth the money when its 2 phones that need to be done.My bricking came from a site that mixed up phones with other phones firmwares.Wont be going back there again and that was before i hooked up to XDA anyway.Now all my downloads are done from here as this a good site to be with.
Hey guys I asked Bell Mobility about an official upgrade for the Galaxy s2. But, I got nothing from them. They just told me to either contact Samsung or to contact a phone number they gave me. But I'm almost positive everyone else I call will give me similar replys. So if you guys know anything please post!!
I wouldn't bother waiting for Bell to push an update.
Sent from my GT-I9100 using XDA App
SaneinOne said:
I wouldn't bother waiting for Bell to push an update.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Darn... well I tried to flash my s2 but problems occured (such as application error forcing me to leave the application and a pop-up would show, or random shut downs). This made me to flash back to the stock Bell firmware, but even after that there seems to be some problems and also the bootloader logo is now changed to a i-9100 logo instead of a i9100m logo. Please help. I did follow all the instructions that were given in the threads to flash but I guess I messed something up.... Any ideas?
what firmware do you have? ugkg2?
skiflyer said:
what firmware do you have? ugkg2?
Click to expand...
Click to collapse
Yes thats the current firmware I have but I would like to change it to a 2.3.5 since theres the battery problem. But what I dont understand is why am I having new problems everytime I flash?
Hey guys do you have any suggestions????
Try CheckROM v4 and the SpeedMOD kernel. Seems to work great with my Bell sgs2.
Sent from my GT-I9100M using XDA App
cholywell said:
Try CheckROM v4 and the SpeedMOD kernel. Seems to work great with my Bell sgs2.
Sent from my GT-I9100M using XDA App
Click to expand...
Click to collapse
I'm not sure.. I might want to send the phone in for repair. There seems to couple of problems that reappears even after reinstalling firmware.. so... I'm not sure. I just want to know how to install a firmware that would make everything work correctly on my galaxy; within the warrenty limits.
Check here for a thread along the name of "how to update bell galaxy s2 to 2.3.5" it explains everything.
Sent from my GT-I9100 using XDA App
Aincalandorn said:
Check here for a thread along the name of "how to update bell galaxy s2 to 2.3.5" it explains everything.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I already did that but my galaxy is messed up even more.
InStake said:
Darn... well I tried to flash my s2 but problems occured (such as application error forcing me to leave the application and a pop-up would show, or random shut downs). This made me to flash back to the stock Bell firmware, but even after that there seems to be some problems and also the bootloader logo is now changed to a i-9100 logo instead of a i9100m logo. Please help. I did follow all the instructions that were given in the threads to flash but I guess I messed something up.... Any ideas?
Click to expand...
Click to collapse
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Idan73 said:
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Click to expand...
Click to collapse
Yep I tried everything.
1) download the firmware I want to use.
2) check kies and all of its applications are closed
3) turn phone off
4) take sim and memory card out
5) get it to download mode and insert usb
6) turn on odin and input all the downloaded files
7) start the odin program
8) once everything is downloaded and loading is complete on the sgs2 take the usb port out
9) finished!
These are the procedures I take.
Anything missing or should I correct?
And also, how do you change the bootloader?
PLEASE HELP.
And what other ways can Samsung detect that I flashed???
InStake said:
Hey guys I asked Bell Mobility about an official upgrade for the Galaxy s2. But, I got nothing from them. They just told me to either contact Samsung or to contact a phone number they gave me. But I'm almost positive everyone else I call will give me similar replys. So if you guys know anything please post!!
Click to expand...
Click to collapse
Dont waste your breath with them, Bell have the Worst customer service of all the carriers
Just update with guide in XDA here
DrewVL said:
Dont waste your breath with them, Bell have the Worst customer service of all the carriers
Just update with guide in XDA here
Click to expand...
Click to collapse
That sucks............ why Bell.. why..
Is there a way to put the phone to the way it was when it came out of the box. ie: have the normal bootloader and firmware?
Idan73 said:
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Click to expand...
Click to collapse
Also, do you use the Frankenstein version or the normal version?
InStake said:
Is there a way to put the phone to the way it was when it came out of the box. ie: have the normal bootloader and firmware?
Click to expand...
Click to collapse
Do a factory reset. Then flash the orignal Bell firmware, kernel, modem and CSC. Downloads are listed in this thread. If you want to send it in for repair then you will then need to buy a $5 USB jig off ebay to reset the custom ROM counter before sending in for repair.
cholywell said:
Do a factory reset. Then flash the orignal Bell firmware, kernel, modem and CSC. Downloads are listed in this thread. If you want to send it in for repair then you will then need to buy a $5 USB jig off ebay to reset the custom ROM counter before sending in for repair.
Click to expand...
Click to collapse
So there is no other way to reset the counter right? And could you give me alink of a trustable one?
Thanks to 'cascader' I have used a program to extract the Stock ROM for our Three UK Galaxy Aces. Thanks again 'cascader'!
The zip file contains:
Cooper_v1.0.ops - Partition table etc. for the Ace ONLY
SS5570_Odin_Multi_Downloader_v4.38.exe - Odin 4.38 - To flash the firmware
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5 - The firmware
SS_DL.dll - This file is used ONLY by Kies so is un-needed
This is a ONEPACKAGE file meaning you only need the cooper.ops file and the firmware to flash. If you do not know what you are doing - http://lmgtfy.com/?q=galaxy+ace+odin+onepackage+flash or http://yagyagaire.blogspot.com/2012/01/how-to-flash-official-stock-firmwares.html
Download link:
http://www.4shared.com/zip/TENhIZUN/GT-S5830_H3G_1_20111223114803.html?
I accept no responsibility for bricked phones. Thanks!
Jamie.
will i need to convert filesystem back from ext 4 or will flashing do this?
my phone was on O2 but after failed attempts at finding the firmware for it, i just stuck an unbranded stock from asia on there...works wonders
It has to be flashed by ODIN @PJ147 Use the included files for ODIN and the instructions from either link
@King Kaze - I was using UK XEU but it was only 2.3.3, This is 2.3.6 and includes Three's network tweaks which makes my 2G roaming a bit better, but completely useless still. I have to wait 2 minutes for 0.facebook.com to load on Opera! If I use Opera on any other phone on 2G m.facebook.com loads quickly. I'm thinking it's Three restricting how fast things can download/tx-rx on 2G, Their websites load alright in seconds... I asked them about this and they denied that they restrict speeds on 2G which makes me laugh.
0.facebook should load faster than all the other facebook sites because it barely has anything
Yeah, It should but Three restrict my 2G speed so it loads really slowly :L
Sent from my WT19i using XDA App
So Will This put My Ace Back To Stock 3uk Rom?
Installed Thank You
Can This Firmware Be Rooted?
Jaycs06 said:
So Will This put My Ace Back To Stock 3uk Rom?
Installed Thank You
Can This Firmware Be Rooted?
Click to expand...
Click to collapse
Yup I rooted it with the same rooting file i used for stock 2.3.3
Ok Cheers Rooted Quick Question Where Is The 3 Mobile Bootanimation Kept I Cant Find the Bootanimation Zip ? I Want To Save It And Use On Custom Roms I Instal
Thank you for posting this firmware, really helped me out.
Jaycs06 said:
Ok Cheers Rooted Quick Question Where Is The 3 Mobile Bootanimation Kept I Cant Find the Bootanimation Zip ? I Want To Save It And Use On Custom Roms I Instal
Click to expand...
Click to collapse
It should be /data/bootanimation.zip or something
Is this stock rom rooted? And if so, how do you go about unrooting it?
is better than DDKQ8?
@Swiftkilla - I don't know sorry, I regrettably got rid of the phone after I posted this so I didn't check
@kevo02 I don't recommend it for you. I see you're from Costa Rica and on 'ICE' - This rom is made by Three UK so I only recommend it on Three's phones. Sorry!
Note: I won't be checking this thread much, I don't really come on XDA and I sold my Galaxy Ace back in February I will still help though if you need anything
HI I tried doing everything like you said. It wont register on 3 network and when u dial it says mobile network unavailable, any advice would be good
King Kaze said:
my phone was on O2 but after failed attempts at finding the firmware for it, i just stuck an unbranded stock from asia on there...works wonders
Click to expand...
Click to collapse
Are you able to tell me which firmware you used? I'm like you and cannot seem to find any o2 firmwares anywhere on the internet, even though they are listed on their own website!
Is your IMEI still present? *#06# from dialer, should be 15/16 digit number
Sent from my Nexus 7 using XDA Premium HD app
dabby91 said:
Are you able to tell me which firmware you used? I'm like you and cannot seem to find any o2 firmwares anywhere on the internet, even though they are listed on their own website!
Click to expand...
Click to collapse
I would just use a generic stock firmware if I were you because its really hard to find them haha
Sent from my Nexus 7 using XDA Premium HD app
I know this thread is a little dusty, but the contents still apply . When I go to start the flashing in odin, it comes up saying "Please connect phones!!".
I have the latest Sammy USB drivers at hand and I'll try it again once installed, but in the mean time, have anybody else faced a similar issue?
I'm coming from this ROM
Thanks in advance
djdanster said:
I know this thread is a little dusty, but the contents still apply . When I go to start the flashing in odin, it comes up saying "Please connect phones!!".
I have the latest Sammy USB drivers at hand and I'll try it again once installed, but in the mean time, have anybody else faced a similar issue?
I'm coming from this ROM
Thanks in advance
Click to expand...
Click to collapse
bump!
can anyone tell me what the latest firmware is for a uk gs3 on orange.
How can i check what i have..i cant seem to find an option to 'check for update' like i had on my htc?
do i have to download and install samsung kies to do updates?
really hoping there is something out to solve some of the freezing and other issues i am having.
thanks
Install kies
Connect ur phone to pc
Let it check for updates
If there is a new update it will let u know
Press thanks if i helped GT-I9100 using Tapatalk 2
It should have the option in Settings/About device/Software update, but should use Kies anyway, and latest UK version is 4.0.4
Michael_P said:
It should have the option in Settings/About device/Software update, but should use Kies anyway, and latest UK version is 4.0.4
Click to expand...
Click to collapse
dose not have the option there although under 'about device' it says android version 4.04
build imm76d.19300bvale4
Hardly any updates on the servers yet .
Use CHECKFUS .
jje
JJEgan said:
Hardly any updates on the servers yet .
Use CHECKFUS .
jje
Click to expand...
Click to collapse
Evening John, what do you think of your new tool?
www.samfirmware.com
Sent from my GT-I9300T using xda premium
when i connect to kies it says i have the lateset firmware
phone is really buggy and needs sorting asap. Poor effort from samsung i feel...i personally think its a quad core thing as i had similar issues with my htc one x and got rid of it in a few days. My htc ones s however is the quickest and most sold performing handset ive ever had.
hpsauce37 said:
when i connect to kies it says i have the lateset firmware
phone is really buggy and needs sorting asap. Poor effort from samsung i feel...i personally think its a quad core thing as i had similar issues with my htc one x and got rid of it in a few days. My htc ones s however is the quickest and most sold performing handset ive ever had.
Click to expand...
Click to collapse
As previously suggested, try other firmware. Forget Kies, its crap and only check for updates for your specific firmware, not elsewhere.
Try the link above i posted or http://samsung-updates.com/device/?id=GT-I9300here for newer releases.
Just follow the guide by Intratech (he also has some official firmware) for flashing with Odin. Could not be simpler. Just backup anything to PC before hand, and then follow instructions exactly.
http://forum.xda-developers.com/showthread.php?t=1671969
You're welcome
Sent from my GT-I9100 using xda premium
There's a widget called "software updates" that comes with the phone
Sent from my GT-I9300 using XDA
UpInTheAir said:
As previously suggested, try other firmware. Forget Kies, its crap and only check for updates for your specific firmware, not elsewhere.
Try the link above i posted or http://samsung-updates.com/device/?id=GT-I9300here for newer releases.
Just follow the guide by Intratech (he also has some official firmware) for flashing with Odin. Could not be simpler. Just backup anything to PC before hand, and then follow instructions exactly.
http://forum.xda-developers.com/showthread.php?t=1671969
You're welcome
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
really appreciate your help with this but just have a couple more questions
i assume that with odin i can flash any of the firmwares and it dosent matter that my phone is locked to orange (well i believe it is). The phone itself has no orange branding or apps installed.
The other thing i am not sure about is which firmware i should use for a uk handset on orange. If i use a generic firmware will that cause problems with the radio's etc?
The other thing is how do i know what the latest is...i mean i might already have it on my device....it says i have 4.04 on it but are there various versions of this?
Sorry if it seems im being lazy about this but just want to be sure i am using the right one.
thanks again for your help
hpsauce37 said:
really appreciate your help with this but just have a couple more questions
i assume that with odin i can flash any of the firmwares and it dosent matter that my phone is locked to orange (well i believe it is). The phone itself has no orange branding or apps installed.
The other thing i am not sure about is which firmware i should use for a uk handset on orange. If i use a generic firmware will that cause problems with the radio's etc?
The other thing is how do i know what the latest is...i mean i might already have it on my device....it says i have 4.04 on it but are there various versions of this?
Sorry if it seems im being lazy about this but just want to be sure i am using the right one.
thanks again for your help
Click to expand...
Click to collapse
I believe so, should be same as SGS2. Phone lock should be "sim" lock not locked bootloader.
You can flash the modem or kernel as individual packages if need be.
In phone dialer, *#1234#
Ie. Firmware ending in LE7 is older than LE8
Don't forget to backup anything important to PC first. Best to factory reset first in recovery and then immediately boot into download mode to flash. Follow Intratech guide exactly and shouldn't be a problem.
Just make sure you flash any full package as .tar.md5 file. Zip won't work with Odin.
For thanks if you feel like it
Sent from my GT-I9300T using xda premium
Hi All,
Please forgive me, I had an iPhone for the last 5 years and it was jailbroken each firmware update.
I just made the android jump (love it!) and i've come to root... and i'm stumped!
I got Odin... But then knowing which firmware/kernal/thingy to use is confusing me badly.
I'm GS3 GT-I93000, T-Mobile in the UK...
Can anyone just point me in the right direction? I just want to be able to enable to added features of things such as Avast Anti-Theft (GPS auto on) which require rooting!
Thanks!
All you need is in the first few posts of this thread http://forum.xda-developers.com/showthread.php?t=1695238
Sent from my CM9 TouchPad
I used this guide to root my t mobile s3.
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3/
Follow each step carefully and you should be fine
Sent from my GT-I9300 using xda app-developers app
Khy50 said:
I used this guide to root my t mobile s3.
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3/
Follow each step carefully and you should be fine
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Nvm
Sent from my GT-I9300 using xda premium
The T-Mobile, UK Version has looked bootloader from what I have been told.
there are plenty of rooting video guides in the general section (to many to link just search) . Or http://forum.xda-developers.com/showthread.php?t=1695238 is probably the easiest way to root with the best guide.
If you are still stuck after looking through those just message back here and I will try to help the best I can.
T__ said:
The T-Mobile, UK Version has looked bootloader from what I have been told.
Click to expand...
Click to collapse
Mine didn't
andyb949 said:
Mine didn't
Click to expand...
Click to collapse
Heard a few of my friends complaining that it did, but then again they probably where doing it wrong and had a USB connected or the phone turned on or something lol.
In the end I rooted it using the first method replied in this post, worked like a charm. Doesn't seem to have any kind of branded or locked bootloader from what I can tell, and root apps are working as they should.
A further question.. on my old iPhone, if I jailbroke it and update the firmware, it reversed the jailbreak.
I want to update the firmware on my GS3 to the latest, will it undo the root? Will I have to re-install root apps etc?
Or will the device stay rooted once i've upgrade?
Many thanks for your help, you guys/gals are a friendly bunch of clever-cloggs.
Here is a link to cwm flashable stock Roms, lg8 is what you want, you can flash these in recovery. I advise after flashing that you upgrade your modem to lh1 which is latest for uk and fixed some issues. Link also supplied
http://forum.xda-developers.com/showthread.php?t=1704185
[ROM][CWM][XXBLG9][ICS][4.0.4] Odexed & Fully Deodexed Stock Roms
http://forum.xda-developers.com/showthread.php?t=1740061
[REF] Galaxy S3 Modem / Radio Collection (I9300 & I9300T ONLY) CWM & Odin Flashable
---------- Post added at 11:38 AM ---------- Previous post was at 11:36 AM ----------
All matters regarding root etc, how to reset flash counter and return to stock for warranty can be found in i9300/General/stickies
Forgive me if this is a stupid question, but whats the significance of this ROM?
Here's my device so far...
Stock ROM (never flashed anything custom) which I rooted using the above method.
I want to update to the latest firmware for the i9300, still stock though as I haven't found a feature in a custom ROM worth messing with it for me.
Then I was just going to re-root (if I needed to).
Does the ROM you posted mean that I won't have to re-root? And it will stay rooted?
And the modem thing... I don't understand.
I'm sorry to be a pain!
Thank you for your help,
the Rom listed are flashable through recovery, and there are a choice of odexed and deodexed stock Roms. Odex is the standard Rom, and Odex basically helps load apps a bit quicker, but has some drawbacks also. I could spend hours trying to fill you in but reading all the links and information I have supplied you with is the easier option
Unless you want to return the favor and spend the next few days explaining the mysteries of Windows to me, then I may consider some mutual spoon feeding
So.. to answer my question, does flashing through recov mean you do not have to re-root the device?
I wonder why the modem update is seperate? You would think they would include such things in the firmware update.
I'm a wizz on windows - fire away! haha.
I do genuinely appreciate your advice and help.
So.. to answer my question, does flashing through recov mean you do not have to re-root the device?
Yes if its not rooted .
Modems are part of firmware but can also be flashed as a separate item .
jje
JJE - My device is rooted though, which I explained
Also, the recov flashable firmware posted above lists this..
"Firmware info:
•Base Firmware: I9300XXBLG9 (4.0.4)
•Region Asia
•Country: Singapore
•Carrier: Unbranded
•Build Date: 30 July 2012
•Modem: DXLG2
•CSC: OLBBLG2
•Change List: 928452"
BLG8 has a version for Europe/UK.. but not BLG9...
Will I have to install the older one?
flash lg8 as I said, ...... lg9 is the Asian version. The modem was a separate ota update to remedy some problems.
I'm on uk Orange/t mobile so all is good
At op to your original Q... all you have to do is stay on your firmware unless you cant wait for the update to be released in the uk, then you can download the latest firmware either from xda or sammobile.com and flash with odin. Now if you stay on your firmware sometimes it will not update properly through kies because of root. In that case go on sammobile and download the firmware for your phone and flash with odin. You will lose root but you already have cf root on your computer so just root again.
Sent from my GT-I9300 using xda premium