im trying to create titanium backup and now when i try to run tibackup it says that it doesnt have root access anymore, but i ran it fine just yesterday. it said check for superuser and busybox - i had both of those, but for some reason my superuser app was gone so i downloaded it again but to no avail. then i tried re-rooting it with superoneclick and it gets stuck on step 7...and in the superoneclick msgbox it says that my sgp isnt rooted. did i do something wrong?
Just flash the su binary again
Sent from my MT11i using xda app-developers app
adity said:
Just flash the su binary again
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
thanks, it worked . i also have another question hopefully you can answer it. i just flashed entropys kernal but when i try to get into the cwm, it takes me to the 3e one. my understanding is that entropys kernal has the cwm in it doesnt it? i flashed it using odin and passed. thanks :good:
ok i just found out it didn't get flashed..im still running stock kernal even tho odin said passed.
this is what i did, i downloaded dd_03052012.zip from entropy. unzipped it in winrar. then when i tried adding the tar to pda section of odin, it wasn't there (but if i were to open its folder thru win explorer then i would see it) just odin wasn't recognizing it. so i renamed the zimage file with .tar at the end, now odin sees it so i go ahead and add it into pda field and push start (player was in download mode) odin said reset....then after a couple secs it said passed! and then it reboot itself...still stock kernal. please help, I've literally been working on this for twelve hours with a break to go grocery shopping thanks in advance.
Sent from my YP-G70 using xda app-developers app
Unroot first
Use superoneclick to unroot first THEN root again. Hopefully that works. If not, you're screwed if you want to ref lash. Sorry.
Scymynd said:
ok i just found out it didn't get flashed..im still running stock kernal even tho odin said passed.
this is what i did, i downloaded dd_03052012.zip from entropy. unzipped it in winrar. then when i tried adding the tar to pda section of odin, it wasn't there (but if i were to open its folder thru win explorer then i would see it) just odin wasn't recognizing it. so i renamed the zimage file with .tar at the end, now odin sees it so i go ahead and add it into pda field and push start (player was in download mode) odin said reset....then after a couple secs it said passed! and then it reboot itself...still stock kernal. please help, I've literally been working on this for twelve hours with a break to go grocery shopping thanks in advance.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
I have a Sony. So I don't use Odin.
But.have you unlocked your bootloader.
If yes then I think kernel should be flashed through fast boot.
hit thanks if.us helped .I am also quite new so like to be appreciated
Related
Well I thought I would try CM7. Apparently the ROM that I was running made a straight upgrade to CM7 impossible.
I flashed back to stock using
s1_odin_20100512.pit
T959UVJFD.tar
Passed with no issues. Also formated the internal SD. Now when I try the usual update.zip method of rooting, the little script seems to stop almost immediately but with no error messages. The progress bar only goes about a 1/10 of the way, then it says successful and reboots. However I don't have SU access nor busybox.
Totally stumped. Any thoughts? This phone was originally rooted in using the same method. If I were to guess, I would say that maybe this "original" ROM is not the original one I had on the phone when I bought it at T-Mo.
When I look at the phones ID it says:
model :SGH-T959
FW: 2.1 update 1
BB: T959UVJFD
Kern: 2.6.29
Build Number :Eclair (I don't remember it originally saying Eclair but I could be mistaken)
Any help would be appreciated.
Apparently the usual update.zip has been naughty lately. Use the attached update.zip posted by s15274n instead.
star_jones said:
Well I thought I would try CM7. Apparently the ROM that I was running made a straight upgrade to CM7 impossible.
I flashed back to stock using
s1_odin_20100512.pit
T959UVJFD.tar
Passed with no issues. Also formated the internal SD. Now when I try the usual update.zip method of rooting, the little script seems to stop almost immediately but with no error messages. The progress bar only goes about a 1/10 of the way, then it says successful and reboots. However I don't have SU access nor busybox.
Totally stumped. Any thoughts? This phone was originally rooted in using the same method. If I were to guess, I would say that maybe this "original" ROM is not the original one I had on the phone when I bought it at T-Mo.
When I look at the phones ID it says:
model :SGH-T959
FW: 2.1 update 1
BB: T959UVJFD
Kern: 2.6.29
Build Number :Eclair (I don't remember it originally saying Eclair but I could be mistaken)
Any help would be appreciated.
Click to expand...
Click to collapse
just use superonelick to root...here is a link..http://forum.xda-developers.com/showthread.php?t=803682
Alex9090 said:
Apparently the usual update.zip has been naughty lately. Use the attached update.zip posted by s15274n instead.
Click to expand...
Click to collapse
Lol. Love that post. You can always use the vibrant tools too to root it. Found under development, stickies
Sent from my T959 using Tapatalk
Dont mean to thread jack but can you link me where i can get odin, pit and tar file? seems like i am mental midget and cant find them.
Thank you
Sent from my SGH-T959 using XDA Premium App
vibrantcm7 said:
Dont mean to thread jack but can you link me where i can get odin, pit and tar file? seems like i am mental midget and cant find them.
Thank you
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Download this......
http://forum.xda-developers.com/showthread.php?t=954509
star_jones said:
Well I thought I would try CM7. Apparently the ROM that I was running made a straight upgrade to CM7 impossible.
I flashed back to stock using
s1_odin_20100512.pit
T959UVJFD.tar
Passed with no issues. Also formated the internal SD. Now when I try the usual update.zip method of rooting, the little script seems to stop almost immediately but with no error messages. The progress bar only goes about a 1/10 of the way, then it says successful and reboots. However I don't have SU access nor busybox.
Totally stumped. Any thoughts? This phone was originally rooted in using the same method. If I were to guess, I would say that maybe this "original" ROM is not the original one I had on the phone when I bought it at T-Mo.
When I look at the phones ID it says:
model :SGH-T959
FW: 2.1 update 1
BB: T959UVJFD
Kern: 2.6.29
Build Number :Eclair (I don't remember it originally saying Eclair but I could be mistaken)
Any help would be appreciated.
Click to expand...
Click to collapse
I think there are two different stock flashes you can use. if you can't root its probably because you used the wrong one. I know that 2.2 froyo also has rooting issues.
vibrantcm7 said:
Dont mean to thread jack but can you link me where i can get odin, pit and tar file? seems like i am mental midget and cant find them.
Thank you
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=849028
star, I would suggest my noob guide in my signature. It has ODIN and two update.zips... one for just rooting, and the other to just flash CWR (the one I use). The latter allows you to ODIN > go straight into CWR and flash a rom.
Done.
i have alll the files needed. i have every file organized into a simple rar. goto my "lifesaver" post and download the rar. it should help!
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
PS: I just this minute reflashed using Heimdall the I9300XXBLFB. Now it boots up, on first boot it said Updating Android optimsing applications 1/65 and proceeded thru to the point it asks me which language I want... this normal??
kuntstubble said:
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
Click to expand...
Click to collapse
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
gee2012 said:
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
Click to expand...
Click to collapse
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
OrbNRG said:
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
Click to expand...
Click to collapse
Once again, I'm using Heimdall not Odin. I'm on OSX not Windows.
Secondly the tar.md5 file is a tar file containing all the components that make the ROM.
kuntstubble said:
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
Click to expand...
Click to collapse
Oke, my bad. I don`t use heimdal so can`t help you.
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
HellcatDroid said:
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
Click to expand...
Click to collapse
Done that also, made no difference :-(
I don't care which ROM I recover correctly but I do want to get the phone working LOL
Use a windows pc and stop using mac?
Its really easy to fix your problem via Odin....
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
pedja381 said:
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Stupid reply USB Jig does not unbrick a phone .
ODIN how can the OP use Odin and why would you think its better than Heimdall ??? .
jje
OK the phone is running, but it's bizarre ...
Basically I'm connected to my WiFi signal, and Chrome works 100%... but the normal browser does'nt... just hangs, then closes.
GMail if I open it I can see all the mails, if I click on one, it just sits there with the circle going round, then closes, although if I scrolll thru all mails it does load more... very strange.
Seems any default apps that where installed have connection issues... It's really pi**ing me off....
Anyone?
BTW: *#1234# reports:
AP: I9300XXBLFB
CP: I93000XXLFB
CSC: I9300OXABLFB
It doesn't matter if you change .tar.md5 to .tar i always do it to.
What was the name of the pit you flashed?
Hi,
I downloaded GalaxyS3RootMac which contained a file called
s3pit.pit
MD5 (s3pit.pit) = c67ccbe3628793a9f0dba761c15e0896
Thats the one I used ... stupidly ... so I guess I overwrote mine own one...
I had this exact same thing with browser. That was caused eather from wrong csc or that I mistakenly flashed the firmware using phone field in odin and not pda. Try to change your csc to something else using *#272*IMEI#. That wipes the phone.
Tried what you recommend but still same problem
I choose BTC btw
It previously was on KOR
Sent from my GT-I9300 using xda premium
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
d4fseeker said:
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi, well you're completely correct I could go bootcamp although I prefer not to. If all else fails I'll do it that way. Sadly today I can't get my hands on a Windows system to use.
The phone is a Benelux model I believe (bought from Mobistar), under that battery it says i9300 from what I remember.
Cheers for the logical response
I got exactly the same problem as the OP with the S3, a Macbook Air on Lion, and Heimdall yesterday. I was frustrated but ended up trying Odin on a Windows 7 virtual machine to re-flash a stock firmware. It went through perfectly and I was saved.
Hi I was wondering if anyone had a link or a copy laying around of the latest ota (vramc3) to use with Odin? The link in Droidstyle's guide takes you there, but the download doesn't work at all. I went to the Samsung sites, but I don't want to flash the wrong thing. I'm not new to using Odin, use it on my tab. I just need that file/safety net before i actually NEED it. If anyone could help me out I would appreciate it very much.
Sent from my SCH-I605 using xda app-developers app
It works for me...click on regular download, wait 30 seconds and click the download link.
Thanks man. I'll give it a try again. Maybe the site was acting up last night. It took me to hot file and when I clicked the link it said downloading for like a minute then I got got network error. Weird thing was I downloaded Odin again and the pit file again without a hitch using your links. I'll report back.
Sent from my GT-P3110 using xda app-developers app
droidstyle said:
It works for me...click on regular download, wait 30 seconds and click the download link.
Click to expand...
Click to collapse
Great, it's coming down now. For some reason I kept getting "unknown network error" last night. So I still use 7-zip to unzip it and stick it in PDA, stick the pit in there and run in DL mode correct? Factory reset in stock recovery to avoid bootloop and then I'm good. Please forgive all the questions, just never used Odin on my N2 and I want to be really sure. Took me a minute to figure out why the stock rooted and unlocked file by Mr. Davidson wouldn't show up in Odin. Then remembered I needed 7-zip.
So call me a super noob but I cant for the life of me unroot my dang Note 2. Ive read forums and threads on how and I dont know what my deal is. I dont know how to get odin on my laptop. I search and search to download it but cant find a way to download it. Im on a different pc than the one I rooted it to begin with because the old pc is stupid slow. I dont have supersu on my phone right now cuz I was screwing around with my phone and a friend of mine said I could unroot the phone by going into the supersu app. So I dont have su binaries. I dont even know if im rooted anymore. Im on scotts ROM the 4.1.2 version. I do have CWM recovery still tho. All I want to know is a step by step process on how to get odin onto my pc, and go from there on. And yes I have read forums about how to unroot but none say anything about how to install odin. I feel really dumb but I really need my phone unrooted ASAP. I have a new phone and tranferred the SIM card over to it....do I need to have the SIM card in my Note 2 in order to unroot it??? Thanks in advance to anyone who can help a bro out
Sent from my SCH-I605 using xda app-developers app
Why are you trying to unroot if i may ask... Just so i know what your trying to achieve? If you are trying to get back to bone stock go to imnuts restore thread in the development section...
TappEd from my Note II
Check out my website for encouragement....
www.projectintercession.blogspot.com
npainter7 said:
So call me a super noob but I cant for the life of me unroot my dang Note 2. Ive read forums and threads on how and I dont know what my deal is. I dont know how to get odin on my laptop. I search and search to download it but cant find a way to download it. Im on a different pc than the one I rooted it to begin with because the old pc is stupid slow. I dont have supersu on my phone right now cuz I was screwing around with my phone and a friend of mine said I could unroot the phone by going into the supersu app. So I dont have su binaries. I dont even know if im rooted anymore. Im on scotts ROM the 4.1.2 version. I do have CWM recovery still tho. All I want to know is a step by step process on how to get odin onto my pc, and go from there on. And yes I have read forums about how to unroot but none say anything about how to install odin. I feel really dumb but I really need my phone unrooted ASAP. I have a new phone and tranferred the SIM card over to it....do I need to have the SIM card in my Note 2 in order to unroot it??? Thanks in advance to anyone who can help a bro out
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Download Odin (it's just a simple windows program). - http://forum.xda-developers.com/atta...3&d=1304094576
Make sure you have the latest samsung drivers - http://www.mediafire.com/?hzlnda0l5t8qyes
To use odin later all you do is power down the phone and boot back into download mode (volume down, power and home at the same time).
Open Odin, plug in phone...Odin should recognize the phone and you will see the com port noted in yellow.
From here you can follow these instructions to flash back to bone stock: http://forum.xda-developers.com/showthread.php?t=2024207
andrewjt19 said:
Why are you trying to unroot if i may ask... Just so i know what your trying to achieve? If you are trying to get back to bone stock go to imnuts restore thread in the development section...
TappEd from my Note II
Check out my website for encouragement....
www.projectintercession.blogspot.com
Click to expand...
Click to collapse
Did this already. Confused me a bit. I'm trying to sell it and since 4.3 ROMS aren't "stable" in a way. I can't flash one and get reboots if I'm gonna try and sell it
Sent from my HTC6500LVW using xda app-developers app
tfly212 said:
Download Odin (it's just a simple windows program). - http://forum.xda-developers.com/atta...3&d=1304094576
Make sure you have the latest samsung drivers - http://www.mediafire.com/?hzlnda0l5t8qyes
To use odin later all you do is power down the phone and boot back into download mode (volume down, power and home at the same time).
Open Odin, plug in phone...Odin should recognize the phone and you will see the com port noted in yellow.
From here you can follow these instructions to flash back to bone stock: http://forum.xda-developers.com/showthread.php?t=2024207
Click to expand...
Click to collapse
The Odin forum you posted doesn't exist anymore I guess
Sent from my HTC6500LVW using xda app-developers app
So I found a file to download for Odin. It downloaded something called zip opener. Now what do I do???? So frustrating
Sent from my HTC6500LVW using xda app-developers app
npainter7 said:
So I found a file to download for Odin. It downloaded something called zip opener. Now what do I do???? So frustrating
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
The download is compressed so you need to extract it (unzip). I am not familar with Zip opener but it probably works like the others (7-zip, etc). Just right click on the file and choose extract. Then you should see a normal application you can open.
tfly212 said:
The download is compressed so you need to extract it (unzip). I am not familar with Zip opener but it probably works like the others (7-zip, etc). Just right click on the file and choose extract. Then you should see a normal application you can open.
Click to expand...
Click to collapse
Ya I'm figuring it out. I'm downloading the file from imnuts right now. After it's downloaded do I just drag the stock file into the PIT spot and then hit start?
Sent from my HTC6500LVW using xda app-developers app
npainter7 said:
Ya I'm figuring it out. I'm downloading the file from imnuts right now. After it's downloaded do I just drag the stock file into the PIT spot and then hit start?
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
Section 1b gives you the steps...you need a pit file and one in the pda slot - http://forum.xda-developers.com/showthread.php?t=2024207
tfly212 said:
Section 1b gives you the steps...you need a pit file and one in the pda slot - http://forum.xda-developers.com/showthread.php?t=2024207
Click to expand...
Click to collapse
I don't see a pit file anywhere. Also I don't see a pda section on Odin anywhere
Sent from my HTC6500LVW using xda app-developers app
Sent from my HTC6500LVW using xda app-developers app
I'm on Odin 3.09. And there isn't a pda spot. So what spot do I place the firmware at then?
Sent from my HTC6500LVW using xda app-developers app
npainter7 said:
I'm on Odin 3.09. And there isn't a pda spot. So what spot do I place the firmware at then?
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
I have never used 3.09, only 1.85 (the link I provided above). Looking at screenshots of 3.09, the fields look the same but are named differently, but since I have never personally used that version I can't guarantee it.
tfly212 said:
I have never used 3.09, only 1.85 (the link I provided above). Looking at screenshots of 3.09, the fields look the same but are named differently, but since I have never personally used that version I can't guarantee it.
Click to expand...
Click to collapse
It took me a minute to figure out also, but they are in the same order but with different names.
hi all,
cant reply to the original thread 'coz xda is not permitting me. so here's my problem..
i downloaded "Auto Pre Root Script" by @Chirtagh. downloaded latest firmware INS-S5282XXANA2-20140206155536.zip and extrated the system.img and executed the script. Everything worked fine and it generated pre_rooted_system.tar
now when i use odin to flash the tar file, it stops at "Nand Write Start!!". Waited for an hour, still no progress. i closed odin and turned on the mobile and it works fine and takes me to the stock rom.
is there anything i need to do to make odin write to nand??
rgds
s5282noob said:
hi all,
cant reply to the original thread 'coz xda is not permitting me. so here's my problem..
i downloaded "Auto Pre Root Script" by @Chirtagh. downloaded latest firmware INS-S5282XXANA2-20140206155536.zip and extrated the system.img and executed the script. Everything worked fine and it generated pre_rooted_system.tar
now when i use odin to flash the tar file, it stops at "Nand Write Start!!". Waited for an hour, still no progress. i closed odin and turned on the mobile and it works fine and takes me to the stock rom.
is there anything i need to do to make odin write to nand??
rgds
Click to expand...
Click to collapse
Make sure that your drivers are installed corrrctly
Or else, just flash pre rooted firmware that chirtagh has made, your pre rooted firmware might be corrupted
Sent from my GT-S5282 using xda app-developers app
ty @swhackeristahsan.
have tried different drivers and different odin versions and usb slots too.
just wanted to flash with latest firmware. 'll try few more times. if nothing works then have to flash the chirtagh's firmware.
s5282noob said:
ty @swhackeristahsan.
have tried different drivers and different odin versions and usb slots too.
just wanted to flash with latest firmware. 'll try few more times. if nothing works then have to flash the chirtagh's firmware.
Click to expand...
Click to collapse
Good luck
Sent from my GT-S5282 using xda app-developers app