Can i flash acid on cm10 fxp142...!!!a always got bootloop even after wiping delvik cache...whts d procedure to run acid over cm10/cm9
virajbogle said:
Can i flash acid on cm10 fxp142...!!!a always got bootloop even after wiping delvik cache...whts d procedure to run acid over cm10/cm9
Click to expand...
Click to collapse
Yeah u can !
Cm9 -ics version
Cm10 - jb version
Same procedure as stock!
Sent from my MT11i using Tapatalk 2
Running on cm9 got bootloop... Guess acid is not completely done yet
Sent from my Neo V using xda premium
Also convert dsp.apk to dsp.txt.....still got boot loop...can u provide jb acid link here...plz...!!!
http://d-h.st/o32
Or check post 702 of acid thread in neo v dev section
Sent from my MT11i using Tapatalk 2
Related
I have rooted my Neo V (Unlocked Bootloader) having stock GB 2.3.4
Can i install any ROM in the Neo V Android Development Section??
or is there any restriction that there will be some Special ROMs for GB 2.3.4??
pleasee help....
You should check if the Rom you see is for your phone
Sent from my MT11i using xda premium
You can install any GB, ICS or Jellybean ROM you find for the Neo V in the development section. Just make sure you follow the instructions given by the devs.
Sent from my MT11i using xda premium
Flashing Baseband
Is it a must that i should flash my baseband to 72 for ICS ROMs or 64 will be sufficient???
It is recommended for best performance. Not compulsory. But you cannot complain to the dev if you have signal drops etc. It's you not using what the dev has recommended.
Sent from my MT11i using xda premium
DeathCzar said:
It is recommended for best performance. Not compulsory. But you cannot complain to the dev if you have signal drops etc. It's you not using what the dev has recommended.
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Thaaanq...
DeathCzar said:
It is recommended for best performance. Not compulsory. But you cannot complain to the dev if you have signal drops etc. It's you not using what the dev has recommended.
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I Installed AOSP 4.0.3 ICS ROM successfully in my Neo V ..
For installing Gapps[Google Apps} .. do i need to enter recovery and install through ZIP from SD CARD????
manoj_nike15 said:
I Installed AOSP 4.0.3 ICS ROM successfully in my Neo V ..
For installing Gapps[Google Apps} .. do i need to enter recovery and install through ZIP from SD CARD????
Click to expand...
Click to collapse
Yes. Thats the way to go.
Sent from my MT11i using xda premium
manoj_nike15 said:
I Installed AOSP 4.0.3 ICS ROM successfully in my Neo V ..
For installing Gapps[Google Apps} .. do i need to enter recovery and install through ZIP from SD CARD????
Click to expand...
Click to collapse
Yes! Boot into CWM and then select install zip from card!
Sent from my Xperia Neo V using Tapatalk 2
Hello I install jellysandwich 6.25 on my neo l Mt25i but I got error to open camera.it doesn't work.I install it 2 times but it doesn't work.when my phone start it say loading xpriea arc s.help me guys.I haven't unlocked my boothlooder yet.
Sent from my MT25i using xda premium
Try flash using tigris kernel. Remember to flash the kernel only. According to the author JS 6.25, this kernel also fix wifi problems for Neo L and I've not even test it yet. Gud luck
Sent from my MT25i using xda app-developers app
ricco7 said:
Try flash using tigris kernel. Remember to flash the kernel only. According to the author JS 6.25, this kernel also fix wifi problems for Neo L and I've not even test it yet. Gud luck
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
It should! If it doesn't then goto /system/libs/module delete the whole module folder , reboot
But first u need to flash that kernel!
Sent from my Xperia Neo V running Paranoid Android NXT
Hi guys! I have a these problems with this ROM:
1. Home.apk FC at boot after 2-3 reboots.
2. Device randomly freezes at boot-animation.
3. Random reboots (device NOT overclocked).
How to fix it?
Thanks!
P.S. Device: Neo V MT11i
botinside said:
Hi guys! I have a these problems with this ROM:
1. Home.apk FC at boot after 2-3 reboots.
2. Device randomly freezes at boot-animation.
3. Random reboots (device NOT overclocked).
How to fix it?
Thanks!
P.S. Device: Neo V MT11i
Click to expand...
Click to collapse
Maybe your coming from another rom..
Follow this instruction (it works on mine so maybeit will work
Also in your device)
1.flash official ics .587 via flashtool then turn on your phone
2.if your bootloader is locked, follow instructionfor locked
(you can find it in js thread)
3if your bootloader is unlocked, flash a kernel with cwm support via fastboot
4.go to cwm
5wipe cache and dalvik cache
6install rom(be careful in choosing in aroma
7 reboot and done
I do this by several times, but rom crashes after reboot. I try a clean install without all «mods« - but nothing happens. =(
Maybe problem with kernel? I use a suave_v6_neoV.
But 7.2.1 and older works fine.. BL is unlocked.
Sent from my MT11i using xda app-developers app
botinside said:
I do this by several times, but rom crashes after reboot. I try a clean install without all «mods« - but nothing happens. =(
Maybe problem with kernel? I use a suave_v6_neoV.
But 7.2.1 and older works fine.. BL is unlocked.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup..maybe..
try to use night elf v1.5 then tell again what is the result
Hey guys. I'm using JellySandwich 6.2.5 on locked bootloader, what should I do to upgrade to 7.3? Follow the steps for 'coming from previous version' or steps for 'i have a locked bootloader'?
Cheers!
zadrozny91 said:
Hey guys. I'm using JellySandwich 6.2.5 on locked bootloader, what should I do to upgrade to 7.3? Follow the steps for 'coming from previous version' or steps for 'i have a locked bootloader'?
Cheers!
Click to expand...
Click to collapse
Not sure but you can try them both but be sure
To do a nandroid backup before do anything
and do I have to do wipes when upgrading from previous version?
botinside said:
I do this by several times, but rom crashes after reboot. I try a clean install without all «mods« - but nothing happens. =(
Maybe problem with kernel? I use a suave_v6_neoV.
But 7.2.1 and older works fine.. BL is unlocked.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
Check using Titanium Backup how much free mem you have in System. If you are using MT15i, chances are that the system partition is getting full as it has only 327 MB by default.
---------- Post added at 11:04 PM ---------- Previous post was at 11:01 PM ----------
Does the walkman have clearbass working on 7.3?
I use a Neo V and I have a 420 MB of system rom. I think a trouble causes by incompability 7.3 version of JS and suave kernel.. I`ll try to flash a night-elf kernel and report you results.
About clearbass.. if Walkman didn't have that, maybe installing audioengine from AC!D team can resolve problem by adding this option in Walkman? I may be wrong.
Sent from my MT11i using xda app-developers app
botinside said:
I use a Neo V and I have a 420 MB of system rom. I think a trouble causes by incompability 7.3 version of JS and suave kernel.. I`ll try to flash a night-elf kernel and report you results.
About clearbass.. if Walkman didn't have that, maybe installing audioengine from AC!D team can resolve problem by adding this option in Walkman? I may be wrong.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
Try to reflash the walkman of thilina
Sent from my Xperia Neo V with JS 7.3 with salade and peppercheese and more !!
in walkman player album art not showing. album art show in widget only. please fix this
Problem has been solved by flashing night-elf kernel v1.5. Thanks a lot all of you for help! Thread closed.
Sent from my MT11i using xda app-developers app
I have flashed Jelly sandwich 7.3.after flashing Acid Engine got bootloop..Help...!!!
Also the Roms in which Acid works..kindly update by everyone own experience...!!!
so no one will get problem while flashing...!!!
virajbogle said:
I have flashed Jelly sandwich 7.3.after flashing Acid Engine got bootloop..Help...!!!
Also the Roms in which Acid works..kindly update by everyone own experience...!!!
so no one will get problem while flashing...!!!
Click to expand...
Click to collapse
i have no problem with JS 7.3
i using JS 7.4 also worked..
---------- Post added at 09:44 PM ---------- Previous post was at 09:39 PM ----------
virajbogle said:
I have flashed Jelly sandwich 7.3.after flashing Acid Engine got bootloop..Help...!!!
Also the Roms in which Acid works..kindly update by everyone own experience...!!!
so no one will get problem while flashing...!!!
Click to expand...
Click to collapse
Wipe dalvik cache.... after flash Ac!d Mode
vineet.patel said:
i have no problem with JS 7.3
i using JS 7.4 also worked..
---------- Post added at 09:44 PM ---------- Previous post was at 09:39 PM ----------
Wipe dalvik cache.... after flash Ac!d Mode
Click to expand...
Click to collapse
I have bootloop after flashing....i hv done 3 time with a new installation...also wipe delvik cache...!!!wht to do nw??
virajbogle said:
I have bootloop after flashing....i hv done 3 time with a new installation...also wipe delvik cache...!!!wht to do nw??
Click to expand...
Click to collapse
Neo or v?
Cause neo has a small system partition! Most of Which is already filled by the big size of JS! So its not possible to flash acid till the time max lowers the size of the rom on neo!
Sent from my MT11i using Tapatalk 2
Neo v.... Plz help I like js mostlovely rom...!!!
Sent from my Xperia Neo V using XDA Premium HD app
virajbogle said:
Neo v.... Plz help I like js mostlovely rom...!!!
Sent from my Xperia Neo V using XDA Premium HD app
Click to expand...
Click to collapse
Which version of acid mate?
I have tried v3 and v4 both work epic on JS!
Sent from my MT11i using Tapatalk 2
Acid V4...i hv tried...!!!
tell me d procedure so again i switched to js... i really liked...!!!
virajbogle said:
Acid V4...i hv tried...!!!
tell me d procedure so again i switched to js... i really liked...!!!
Click to expand...
Click to collapse
Well I just wiped flashed acid and then wiped dalvik! Then rebooted! Thats it!
Sent from my MT11i using Tapatalk 2
Dev Jaskirat said:
Well I just wiped flashed acid and then wiped dalvik! Then rebooted! Thats it!
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
kkkk....
I really like the above combination and think my phone will work smooth and zippy,also no problem with moderate gaming and battery life,but i'm not too sure cause this is my first time reverting from stock rom....Few questions---->
1.Will the adreno libs work with the rom,cause in the thread it was written they work only with stock rom,maybe it should have been stock based rom.....
2.Should i first flash the kernel and then the rom or the order dosen't matter.....
I would like all of your opinions of personal use of the rom,over time,if anyone has this combination please let me know how this works for you,should I or should i not go for this...,
Anything and everything you have in your thoughts about this please let me know and please answer my questions...{on a Neo V not a Neo}
always thankful:good:
Icecream pureness already have the new adreno libs.You dont need to flash it.And the combination is good.
http://forum.xda-developers.com/showpost.php?p=34342421&postcount=2299
siankatabg said:
Icecream pureness already have the new adreno libs.You dont need to flash it.And the combination is good.
http://forum.xda-developers.com/showpost.php?p=34342421&postcount=2299
Click to expand...
Click to collapse
Thanks dude!
i am using pureness build 14.
smooth and good battery life. adreno libs is included in the rom. no need to flash it.
the only way to know how good a custom rom is to try it .
you can always revert back to stock fimware or whatever rom you were using before it.
xperia ultimate hd rom - suave v 6 kernel .
I was using Ice Cream Pureness build 14 with adreno libs ( have in the build ), it's very smooth and very good battery life, but when changed my kernel for Lupus Kernel, rom stopped work. :crying:
Only was bootlooping.
PS: My english is bad, sorry for that.
Ofcourse.. because as far as i know lupus kernel is jb based.. how will it work on ics?? U cannot have a jb kernel and ics rom
Hope this fulfilled your need.. hit thanks if i did..
Sent from my Neo V using xda premium
vishal_android freak said:
Ofcourse.. because as far as i know lupus kernel is jb based.. how will it work on ics?? U cannot have a jb kernel and ics rom
Hope this fulfilled your need.. hit thanks if i did..
Sent from my Neo V using xda premium
Click to expand...
Click to collapse
There is Lupus kernel based on stock ICS as well...Don't get it confused with Jb kernel...
Its just that that guy has not followed steps properly I think ...
Sent from my Xperia Neo V using xda premium
Ohhh.. can you give me its link please..??
Sent from my Neo V using xda premium
In my SIG bro....
Sent from my Xperia Neo V using xda premium
Yeah got it..
Sent from my Neo V using xda premium